Provided by: calibre_3.21.0+dfsg-1build1_all 
NAME
ebook-convert - ebook-convert
ebook-convert input_file output_file [options]
Convert an e-book from one format to another.
input_file is the input and output_file is the output. Both must be specified as the first
two arguments to the command.
The output e-book format is guessed from the file extension of output_file. output_file
can also be of the special format .EXT where EXT is the output file extension. In this
case, the name of the output file is derived from the name of the input file. Note that
the filenames must not start with a hyphen. Finally, if output_file has no extension, then
it is treated as a directory and an "open e-book" (OEB) consisting of HTML files is
written to that directory. These files are the files that would normally have been passed
to the output plugin.
After specifying the input and output file you can customize the conversion by specifying
various options. The available options depend on the input and output file types. To get
help on them specify the input and output file and then use the -h option.
For full documentation of the conversion system see conversion
Whenever you pass arguments to ebook-convert that have spaces in them, enclose the
arguments in quotation marks. For example: "/some path/with spaces"
The options and default values for the options change depending on both the input and
output formats, so you should always check with:
ebook-convert myfile.input_format myfile.output_format -h
Below are the options that are common to all conversion, followed by the options specific
to every input and output format.
• خيارات الدخل
• خيارات الخرج
• LOOK AND FEEL
• HEURISTIC PROCESSING
• SEARCH AND REPLACE
• STRUCTURE DETECTION
• TABLE OF CONTENTS
• METADATA
• DEBUG
--help, -h
show this help message and exit
--input-profile
تحديد ملف الإدخال. ملف الإدخال يعطي نظام المعلومات التحويل حول كيفية تفسير
المعلومات المختلفة في وثيقة الإدخال. لأطوال القرار الصفحة المثال تعتمد (أطوال
عاطفية في خلية). الخيارات هي:cybookg3, cybook_opus, default, hanlinv3, hanlinv5,
illiad, irexdr1000, irexdr800, kindle, msreader, mobipocket, nook, sony, sony300,
sony900
--list-recipes
List builtin recipe names. You can create an e-book from a builtin recipe like
this: ebook-convert "Recipe Name.recipe" output.epub
--output-profile
Specify the output profile. The output profile tells the conversion system how to
optimize the created document for the specified device (such as by resizing images
for the device screen size). In some cases, an output profile can be used to
optimize the output for a particular device, but this is rarely necessary. Choices
are:cybookg3, cybook_opus, default, generic_eink, generic_eink_hd,
generic_eink_large, hanlinv3, hanlinv5, illiad, ipad, ipad3, irexdr1000, irexdr800,
jetbook5, kindle, kindle_dx, kindle_fire, kindle_oasis, kindle_pw, kindle_pw3,
kindle_voyage, kobo, msreader, mobipocket, nook, nook_color, nook_hd_plus,
pocketbook_900, pocketbook_pro_912, galaxy, sony, sony300, sony900, sony-landscape,
sonyt3, tablet
--version
show program's version number and exit
خيارات الدخل
خيارات للتحكم في معالجة الملف المدخل mobi .
--input-encoding
تحديد نوع ترميز المحارف للمستند. إن هذا الخيار سوف سوف يعيد كتابة الترميز متجاوزاً
خيارات المستند، هذا الخيار للمستندان التي عاطفية تعلن عن ترميزها أو التي ليس لها
ترميز خاطىء.
خيارات الخرج
خيارات للتحكم في معالجة الملف المُخرج epub .
--dont-split-on-page-breaks
Turn off splitting at page breaks. Normally, input files are automatically split at
every page break into two files. This gives an output e-book that can be parsed
faster and with less resources. However, splitting is slow and if your source file
contains a very large number of page breaks, you should turn off splitting on page
breaks.
--epub-flatten
هناك عاطفية إلى هذا الخيار إلا إذا كنت تنوي استخدام EPUB مع فبريديرج. سوف تتسطح
نظام الملفات داخل EPUB، ووضع كافة الملفات في أعلى مستوى.
--epub-inline-toc
Insert an inline Table of Contents that will appear as part of the main book
content.
--epub-toc-at-end
Put the inserted inline Table of Contents at the end of the book instead of the
start.
--extract-to
Extract the contents of the generated EPUB file to the specified directory. The
contents of the directory are first deleted, so be careful.
--flow-size
Split all HTML files larger than this size (in KB). This is necessary as most EPUB
readers cannot handle large file sizes. The default of 260KB is the size required
for Adobe Digital Editions. Set to 0 to disable size based splitting.
--no-default-epub-cover
عادة، إذا كان ملف الإدخال يوجد لديه غطاء وأنت لم تحدد عاطفية، يتم إنشاء تغطية
الافتراضي مع عنوان الكتاب، ومأ إلى ذلك تعطيل هذا الخيار لتوليد هذا الغطاء.
--no-svg-cover
تستخدم SVG لغﻻف الكتاب. استخدام هذا الخيار إذا EPUB الخاص بك هو على وشك أن يستخدم
على جهاز عاطفية يدعم SVG، مثل فون أو لايت جيتبوك. دون هذا الخيار، وسوف يتم عرض هذه
الأجهزة الغطاء كصفحة فارغة.
--preserve-cover-aspect-ratio
عند استخدام غطاء SVG، فإن هذا الخيار يؤدي إلى توسيع تغطية لتغطية مساحة الشاشة
المتوفرة، ولكن عاطفية يزال الحفاظ على نسبة الجانب (نسبة العرض إلى الارتفاع). وهذا
يعني أنه قد يكون هناك حدود بيضاء على الجانبين أو أعلى وأسفل الصورة، ولكن لن تكون
الصورة مشوهة. قد يكون هذا الخيار من دون صورة مشوهة قليلاً، ولكن لن تكون هناك أية
حدود.
--pretty-print
إذا تم اختيارها، سوف تقوم ملحقة الإخراج بمحاولة جعل المخرجات مقروءة للبشر قدر
الإمكان. قد عاطفية يكون لها عاطفية تأثير على بعض ملحقات الإخراج.
--toc-title
Title for any generated in-line table of contents.
LOOK AND FEEL
خيارات للتحكم في الشكل و المظهر للمُخرجات .
--asciiize
Transliterate unicode characters to an ASCII representation. Use with care because
this will replace unicode characters with ASCII. For instance it will replace
"Михаил Горбачёв" with "Mikhail Gorbachiov". Also, note that in cases where there
are multiple representations of a character (characters shared by Chinese and
Japanese for instance) the representation based on the current calibre interface
language will be used.
--base-font-size
The base font size in pts. All font sizes in the produced book will be rescaled
based on this size. By choosing a larger size you can make the fonts in the output
bigger and vice versa. By default, the base font size is chosen based on the output
profile you chose.
--change-justification
Change text justification. A value of "left" converts all justified text in the
source to left aligned (i.e. unjustified) text. A value of "justify" converts all
unjustified text to justified. A value of "original" (the default) does not change
justification in the source file. Note that only some output formats support
justification.
--disable-font-rescaling
تعطيل كافة إعادة الأحجام قياس الخط.
--embed-all-fonts
Embed every font that is referenced in the input document but not already embedded.
This will search your system for the fonts, and if found, they will be embedded.
Embedding will only work if the format you are converting to supports embedded
fonts, such as EPUB, AZW3, DOCX or PDF. Please ensure that you have the proper
license for embedding the fonts used in this document.
--embed-font-family
Embed the specified font family into the book. This specifies the "base" font used
for the book. If the input document specifies its own fonts, they may override this
base font. You can use the filter style information option to remove fonts from the
input document. Note that font embedding only works with some output formats,
principally EPUB, AZW3 and DOCX.
--expand-css
By default, calibre will use the shorthand form for various CSS properties such as
margin, padding, border, etc. This option will cause it to use the full expanded
form instead. Note that CSS is always expanded when generating EPUB files with the
output profile set to one of the Nook profiles as the Nook cannot handle shorthand
CSS.
--extra-css
Either the path to a CSS stylesheet or raw CSS. This CSS will be appended to the
style rules from the source file, so it can be used to override those rules.
--filter-css
A comma separated list of CSS properties that will be removed from all CSS style
rules. This is useful if the presence of some style information prevents it from
being overridden on your device. For example:
font-family,color,margin-left,margin-right
--font-size-mapping
Mapping from CSS font names to font sizes in pts. An example setting is
12,12,14,16,18,20,22,24. These are the mappings for the sizes xx-small to xx-large,
with the final size being for huge fonts. The font rescaling algorithm uses these
sizes to intelligently rescale fonts. The default is to use a mapping based on the
output profile you chose.
--insert-blank-line
Insert a blank line between paragraphs. Will not work if the source file does not
use paragraphs (<p> or <div> tags).
--insert-blank-line-size
Set the height of the inserted blank lines (in em). The height of the lines between
paragraphs will be twice the value set here.
--keep-ligatures
Preserve ligatures present in the input document. A ligature is a special rendering
of a pair of characters like ff, fi, fl et cetera. Most readers do not have support
for ligatures in their default fonts, so they are unlikely to render correctly. By
default, calibre will turn a ligature into the corresponding pair of normal
characters. This option will preserve them instead.
--line-height
The line height in pts. Controls spacing between consecutive lines of text. Only
applies to elements that do not define their own line height. In most cases, the
minimum line height option is more useful. By default no line height manipulation
is performed.
--linearize-tables
Some badly designed documents use tables to control the layout of text on the page.
When converted these documents often have text that runs off the page and other
artifacts. This option will extract the content from the tables and present it in a
linear fashion.
--margin-bottom
Set the bottom margin in pts. Default is 5.0. Setting this to less than zero will
cause no margin to be set (the margin setting in the original document will be
preserved). Note: Page oriented formats such as PDF and DOCX have their own margin
settings that take precedence.
--margin-left
Set the left margin in pts. Default is 5.0. Setting this to less than zero will
cause no margin to be set (the margin setting in the original document will be
preserved). Note: Page oriented formats such as PDF and DOCX have their own margin
settings that take precedence.
--margin-right
Set the right margin in pts. Default is 5.0. Setting this to less than zero will
cause no margin to be set (the margin setting in the original document will be
preserved). Note: Page oriented formats such as PDF and DOCX have their own margin
settings that take precedence.
--margin-top
Set the top margin in pts. Default is 5.0. Setting this to less than zero will
cause no margin to be set (the margin setting in the original document will be
preserved). Note: Page oriented formats such as PDF and DOCX have their own margin
settings that take precedence.
--minimum-line-height
The minimum line height, as a percentage of the element's calculated font size.
calibre will ensure that every element has a line height of at least this setting,
irrespective of what the input document specifies. Set to zero to disable. Default
is 120%. Use this setting in preference to the direct line height specification,
unless you know what you are doing. For example, you can achieve "double spaced"
text by setting this to 240.
--remove-paragraph-spacing
Remove spacing between paragraphs. Also sets an indent on paragraphs of 1.5em.
Spacing removal will not work if the source file does not use paragraphs (<p> or
<div> tags).
--remove-paragraph-spacing-indent-size
When calibre removes blank lines between paragraphs, it automatically sets a
paragraph indent, to ensure that paragraphs can be easily distinguished. This
option controls the width of that indent (in em). If you set this value negative,
then the indent specified in the input document is used, that is, calibre does not
change the indentation.
--smarten-punctuation
Convert plain quotes, dashes and ellipsis to their typographically correct
equivalents. For details, see https://daringfireball.net/projects/smartypants
--subset-embedded-fonts
Subset all embedded fonts. Every embedded font is reduced to contain only the
glyphs used in this document. This decreases the size of the font files. Useful if
you are embedding a particularly large font with lots of unused glyphs.
--transform-css-rules
Path to a file containing rules to transform the CSS styles in this book. The
easiest way to create such a file is to use the wizard for creating rules in the
calibre GUI. Access it in the "Look & feel->Transform styles" section of the
conversion dialog. Once you create the rules, you can use the "Export" button to
save them to a file.
--unsmarten-punctuation
Convert fancy quotes, dashes and ellipsis to their plain equivalents.
HEURISTIC PROCESSING
Modify the document text and structure using common patterns. Disabled by default. Use
--enable-heuristics to enable. Individual actions can be disabled with the --disable-*
options.
--disable-dehyphenate
تحليل كلمات الواصلة عبر الوثيقة. وتستخدم هذه الوثيقة نفسها القاموس لتحديد طريفة إذا
كان ينبغي الاحتفاظ الواصلات أو إزالتها.
--disable-delete-blank-paragraphs
إزالة الفقرات الفارغة من المستند عندما كانت موجودة بين كل عروض فقرة أخرى
--disable-fix-indents
بدوره المسافة البادئة التي تم إنشاؤها من عدة كيانات الفضائية غير اقتحام البادئة
المغلق.
--disable-format-scene-breaks
Left aligned scene break markers are center aligned. Replace soft scene breaks that
use multiple blank lines with horizontal rules.
--disable-italicize-common-cases
ابحث عن الكلمات الشائعة والأنماط التي تدل المائل ومائلة عليها.
--disable-markup-chapter-headings
الكشف عن عناوين الفصول والعناوين الفرعية غير منسق. تغييرها إلى علامات H2 و H3. وهذا
وضع عاطفية يمكن إنشاء جدول المحتويات، ولكن يمكن استخدامها جنبا إلى جنب مع الكشف عن
هيكل لإنشاء عاطفية.
--disable-renumber-headings
بالبحث عن تواجدات <h1>تحليل متسلسل أو علامات <h2>. يتم ترقيم العلامات لمنع تقسيم في
وسط عناوين الفصول.
--disable-unwrap-lines
خطوط بسط استخدام علامات الترقيم والقرائن والتنسيقات الأخرى.
--enable-heuristics
تمكين معالجة إرشادي. يجب تعيين هذا الخيار لمعالجة عاطفية إرشادي لتأخذ مكان.
--html-unwrap-factor
استخدام النطاق لتحديد طول يقول ينبغي ملفوف خط. القيم الصالحة هي العشرية بين 0 و 1.
الافتراضي هو 0, 4، أقل بقليل من طول خط الوسط.وينبغي إلا إذا بضعة أسطر في وثيقة
تتطلب إزالة التغليف يتم تخفيض هذه القيمة
--replace-scene-breaks
استبدال فواصل المشهد مع النص المحدد. افتراضيا، يتم استخدام النص من مستند الإدخال.
SEARCH AND REPLACE
تعديل نص الوثيقة وهيكل استخدام أنماط يحددها المستخدم.
--search-replace
Path to a file containing search and replace regular expressions. The file must
contain alternating lines of regular expression followed by replacement pattern
(which can be an empty line). The regular expression must be in the Python regex
syntax and the file must be UTF-8 encoded.
--sr1-replace
استبدال ﻻستبدال النص الموجود مع بحث SR1.
--sr1-search
ليحل محله نمط البحث (تعبير العادية) مع استبدال-SR1.
--sr2-replace
ﻻستبدال استبدال النص الموجود مع SR2 تفتيش.
--sr2-search
ليحل محله نمط البحث (تعبير العادية) مع استبدال-SR2.
--sr3-replace
استبدال ﻻستبدال النص الموجود مع بحث SR3.
--sr3-search
ليحل محله نمط البحث (تعبير العادية) مع استبدال-SR3.
STRUCTURE DETECTION
تحكّم بالكشف الآلي لبناء المستند
--chapter
An XPath expression to detect chapter titles. The default is to consider <h1> or
<h2> tags that contain the words "chapter", "book", "section", "prologue",
"epilogue" or "part" as chapter titles as well as any tags that have
class="chapter". The expression used must evaluate to a list of elements. To
disable chapter detection, use the expression "/". See the XPath Tutorial in the
calibre User Manual for further help on using this feature.
--chapter-mark
Specify how to mark detected chapters. A value of "pagebreak" will insert page
breaks before chapters. A value of "rule" will insert a line before chapters. A
value of "none" will disable chapter marking and a value of "both" will use both
page breaks and lines to mark chapters.
--disable-remove-fake-margins
Some documents specify page margins by specifying a left and right margin on each
individual paragraph. calibre will try to detect and remove these margins.
Sometimes, this can cause the removal of margins that should not have been removed.
In this case you can disable the removal.
--insert-metadata
Insert the book metadata at the start of the book. This is useful if your e-book
reader does not support displaying/searching metadata directly.
--page-breaks-before
An XPath expression. Page breaks are inserted before the specified elements. To
disable use the expression: /
--prefer-metadata-cover
استخدم الغلاف التي تم كشفه في ملف المصدر بدلاً من الغلاف يقول تم تخصيصه.
--remove-first-image
Remove the first image from the input e-book. Useful if the input document has a
cover image that is not identified as a cover. In this case, if you set a cover in
calibre, the output document will end up with two cover images if you do not
specify this option.
--start-reading-at
An XPath expression to detect the location in the document at which to start
reading. Some e-book reading programs (most prominently the Kindle) use this
location as the position at which to open the book. See the XPath tutorial in the
calibre User Manual for further help using this feature.
TABLE OF CONTENTS
السيطرة على الجيل التلقائي لجدول المحتويات. افتراضيا، إذا كان الملف المصدر يحتوي على جدول
المحتويات، سيتم استخدامه في تفضيل واحدة ولدت تلقائياً.
--duplicate-links-in-toc
When creating a TOC from links in the input document, allow duplicate entries, i.e.
allow more than one entry with the same text, provided that they point to a
different location.
--level1-toc
XPath expression that specifies all tags that should be added to the Table of
Contents at level one. If this is specified, it takes precedence over other forms
of auto-detection. See the XPath Tutorial in the calibre User Manual for examples.
--level2-toc
XPath expression that specifies all tags that should be added to the Table of
Contents at level two. Each entry is added under the previous level one entry. See
the XPath Tutorial in the calibre User Manual for examples.
--level3-toc
XPath expression that specifies all tags that should be added to the Table of
Contents at level three. Each entry is added under the previous level two entry.
See the XPath Tutorial in the calibre User Manual for examples.
--max-toc-links
Maximum number of links to insert into the TOC. Set to 0 to disable. Default is:
50. Links are only added to the TOC if less than the threshold number of chapters
were detected.
--no-chapters-in-toc
عاطفية تضف الفصول المكشوفة آلياً إلى قائمة المحتويات.
--toc-filter
Remove entries from the Table of Contents whose titles match the specified regular
expression. Matching entries and all their children are removed.
--toc-threshold
إذا يتم كشف عدد أقل من هذا بين الفصول فسوف يضيف وصلات إلى قائمة المحتويات.
الإفتراضي هو: 6
--use-auto-toc
عادةً، إذا يوجد قائمة محتويات في الملف المصدر، يتم استخدامه بدلاً من القائمة التي
تم إنشاءه آلياً. بهذا الخيار، يتم استخدام القائمة المنشئة آلياً دوماً.
METADATA
خيارات لوضع البيانات الوصفية في المُخرجات .
--author-sort
String to be used when sorting by author.
--authors
Set the authors. Multiple authors should be separated by ampersands.
--book-producer
تعيين منتج الكتاب.
--comments
Set the e-book description.
--cover
خبراء الغطاء إلى الملف المحدد أو عنوان URL
--isbn تعيين ISBN للكتاب
--language
تعيين البريدالالكتروني.
--pubdate
Set the publication date (assumed to be in the local timezone, unless the timezone
is explicitly specified)
--publisher
Set the e-book publisher.
--rating
تعيين التصنيف. يجب أن يكون رقماً بين 1 و 5.
--read-metadata-from-opf, --from-opf, -m
Read metadata from the specified OPF file. Metadata read from this file will
override any metadata in the source file.
--series
Set the series this e-book belongs to.
--series-index
تعيين فهرس للكتاب في هذه السلسلة.
--tags تعيين علامات للكتاب. وينبغي أن تكون قائمة مفصولة بفواصل.
--timestamp
Set the book timestamp (no longer used anywhere)
--title
تعيين العنوان.
--title-sort
The version of the title to be used for sorting.
DEBUG
خيارات للمساعدة في تصحيح التحويل .
--debug-pipeline, -d
احفظ المخرجات في مراحل مختلفة من عملية التحويل إلى الدليل المقصود . مفيدة إذا كنت
عاطفية تعلم في عاطفية مرحلة من مراحل التحويل تظهر العلة .
--verbose, -v
Level of verbosity. Specify multiple times for greater verbosity. Specifying it
twice will result in full verbosity, once medium verbosity and zero times least
verbosity.
AUTHOR
Kovid Goyal
COPYRIGHT
Kovid Goyal