Provided by: bar_1.11.1-3_amd64 bug

NAME

       bar - show information about a data transfer

SYNOPSIS

       bar [ I/O-options ] [ display-options ] [ color-options ]
           [ input-file ] [ output-file ]
           [ -h | --help ] [ -v | --version ]

DESCRIPTION

       Bar  is  a  simple  tool  to  process a stream of data and print a display for the user on
       stderr showing (a) the amount of data passed, (b) the throughput  of  the  data  transfer,
       and,  if the total size of the data stream is known, (c) estimated time remaining, percent
       complete, and a progress bar.

       Bar was originally written for the purpose of estimating the  amount  of  time  needed  to
       transfer  large  amounts  (many, many gigabytes) of data across a network.  (Usually in an
       SSH/tar pipe.)

I/O COMMAND LINE OPTIONS

       -if input-file
       --in-file input-file

         Read input from input-file.  Default: stdin

       -of output-file
       --out-file output-file

         Write output to output-file. If the output file is a directory, then bar will attempt to
         create  a file in the output directory with the same name as the input file, and attempt
         to copy the input file mode as well as it's data.  Default: stdout

       Please notice that if no -if, --in-file, -of, or --out-file options are specified  on  the
       command line, and an unknown command line option is encountered, then bar will assume that
       the first unknown command line option is a path to an  input  file,  and  the  second  (if
       found) is a path to an output file.

       -s size
       --size size

         Expect an input stream of size bytes.

         When  reading a regular file or a link to a regular file, bar will extract the file size
         on it's own.  However, this flag is useful for  reading  from  a  character-  or  block-
         special  device  file, or from a pipe.  size may be followed by 'k', 'm', 'g', 't', 'p',
         or  'e'  for  kilobytes,  megabytes,  gigabytes,  terabytes,  petabytes,  or   exabytes,
         respectively  (see also the -k option below).  Alternatively, size may also be specified
         in terms of 'b' for blocks (see the -bl option below).  See examples below.

       -c size
       --completed size

         Instruct bar that size bytes of the data stream have already been copied, and that  this
         is  a  continuation  of a previous data stream.  Note that use of this option will throw
         off throughput and ETA calculations at  first,  but  they  should  settle  down  as  the
         transfer continues.

         -bs buffer-size
         --buffer-size buffer-size

           Allocate  an I/O buffer of buffer-size bytes.  The same modifiers may apply here ('k',
           'm', 'g', 't', 'p', 'e' and 'b') as for the -s flag above.  Changing the  buffer  size
           can  improve  throughput,  depending  on  your  application  of  bar.   For  fast  I/O
           operations, say from a  ramdisk  for  instance,  it  might  be  worth  your  while  to
           experiment with a large buffer (circa 1MB for instance).  But for slow I/O operations,
           like from a tape drive, you could merely  be  wasting  your  memory.   Default:  52488
           (512KB)

         -th rate
         --throttle rate

           Restrict I/O throughput to rate bytes per second.  The same modifiers apply here ('k',
           'm', 'g', 't', 'p', 'e' and 'b') as for the -s flag above.

         -i seconds
         --interval seconds

           Update the display every seconds seconds.  Default: 1 second

         -t microseconds
         --timeout microseconds

           The number of microseconds to wait for a change in I/O  state  before  select()  times
           out.  Default: 250000 (1/4 second)

         -k 1000|1024
         --kilo 1000|1024

           Use either 1000 or 1024 as the definition of a kilobyte.  Default: 1024

         -bl size
         --block-size size

           When reading sizes from the command line that are specified in terms of blocks, assume
           a single block is size bytes.  Size may be followed by 'k', 'm', 'g', 't', 'p', or 'e'
           for  kilobytes, megabytes, gigabytes, terabytes, petabytes, or exabytes, respectively.
           Block size must be set before specifying any sizes in terms of blocks or  the  default
           value will be used instead.  Specifying size in terms of 'b' for blocks is not allowed
           for this option.  Default: 512

DISPLAY COMMAND LINE OPTIONS

       -sw width
       --screen-width width

         Assume a screen width of width characters.

         Bar will attempt to retrieve the width of the terminal it is running on, and will adjust
         that width if the terminal is resized.  If bar cannot determine the terminal width, then
         bar will assume a default width of 79 characters.  Use the --screen-width  command  line
         option  to  override this behavior and specify a fixed width for bar to use.  (When this
         option is used, bar will ignore terminal resized signals and continue to use  the  value
         provided by the user.)

       -sw-1 | --screen-width-minus-one
       -sw-0 | --screen-width-minus-zero

         Instruct  bar to use either the entire column width reported by termio, or one less than
         reported by termio.  I.e. If termio reports that you  are  running  bar  in  a  terminal
         that's  80  characters  wide,  using  the  command  line option --screen-width-minus-one
         instructs bar to only use 79 characters  to  print  the  display.   If  you're  using  a
         terminal  or  shell that wraps the line whenever bar prints the last character then this
         should alleviate that problem.  Default is to use the full terminal's width.

       -sh height
       --screen-height height

         Assume a screen height of height characters.

         Bar will attempt to retrieve the height of the terminal  it  is  running  on,  and  will
         adjust  that  height  if  the terminal is resized.  If bar cannot determine the terminal
         height, then bar will assume a default height of 23 characters.  Use the --screen-height
         command line option to override this behavior and specify a fixed height for bar to use.
         (When this option is used, bar will ignore terminal resized signals and continue to  use
         the value provided by the user.)

         Please  note  that  this option is only useful when used in conjunction with the --info-
         file command line option.  Otherwise bar has no need to know the screen height in  order
         to perform it's function.

       -sh-1 | --screen-height-minus-one
       -sh-0 | --screen-height-minus-zero

         Instruct  bar  to  use either the entire row height reported by termio, or one less than
         reported by termio.  I.e. If termio reports that you  are  running  bar  in  a  terminal
         that's  24 rows characters high, using the command line option --screen-height-minus-one
         instructs bar to only use 23 rows to print the display.  If you're using a  terminal  or
         shell  that  wraps  the  line  whenever  bar  prints the last character then this should
         alleviate that problem.  Default is to use the full terminal's height.

         Please note that this option is only useful when used in conjunction  with  the  --info-
         file  command line option.  Otherwise bar has no need to know the screen height in order
         to perform it's function.

       -ti string | --title string
         Set the title to string.

       -dti | -nti
       --display-title | --no-title
         Turn on/off the title display.  Even if on, if no title string is set then no title will
         be displayed.  Default is on.

       -dtw | --display-twiddle
       -ntw | --no-twiddle

         Turn on/off the twiddle in the display.

       -dc | --display-count
       -nc | --no-count

         Turn on/off the data count in the display.  Default is on.

       -dcb | -ncb
       --display-count-bits | --no-count-bits
         Display the data count at bits instead of as bytes.  Default is off.

         By  default  bar  will display the data count as bytes using the notation of "B".  Using
         this option, bar will display the throughput as bits using the notation of "b".

       -dth | --display-throughput
       -nth | --no-throughput

         Turn on/off the data throughput in the display.  Default is on.

       -dthb | -nthb
       --display-throughput-bits | --no-throughput-bits
         Display throughput as bits/second instead of as bytes/second.  Default is off.

         By default bar will display the throughput as bytes/second using the notation of  "B/s".
         Using  this option, bar will display the throughput as bits/second using the notation of
         "b/s".

       -dt | --display-time
       -nt | --no-time

         Turn on/off the time elapsed or eta in the display.  Default is on.

       -de | --display-elapsed-only
       -ne | --no-elapsed-only

         Force bar to display the elapsed time instead of the eta.  Default is off.

       -dp | --display-percent
       -np | --no-percent

         Turn on/off percent complete in the display.  Default is on.

       -db | --display-bar
       -nb | --no-bar

         Turn on/off the progress bar in the display.  Default is on.

       -ds | --display-summary
       -ns | --no-summary

         Turn on/off the summary information displayed when the operation is  complete.   Default
         is on.

       -da | --display-all
       -dn | --display-none

         Turn  on/off  all displays.  -dn is equivalent to -ntw -nc -nth -nt -np -nb.  (Using -dn
         followed by -db would be equivalent to -ntw -nc -nth -nt -np.)   -da  is  equivalent  to
         -dtw -dc -dth -dt -dp -db.

       -inf infofile | --info-file infofile

         Display  the information contained in infofile while copying data.  The file infofile is
         a regular text file containing tidbits of information broken  up  into  sections.   Each
         section  is  separated  by  a  line containing the string "@@@" by itself, with no other
         characters on the line, either preceeding or following.

         When bar begins, it will count the number of sections within the file.   Bar  will  then
         begin  by displaying the first section of information to the display before it draws the
         status line.  Then, periodically, each of the successive sections will be  displayed  as
         the progress indicator fills up.

         The  progress  of  the  data  transfer  is the trigger for each successive display.  For
         instance, if your information file has exactly four  sections  to  it,  then  the  first
         section  will  be printed as bar begins, the second section after the data transfer hits
         25%, the third at 50%, and the fourth at 75%.

         If bar is configured to use ANSI control codes, then the screen will be  cleared  before
         printing  a  section  from the information file.  Otherwise, the contents of the current
         screen are scolled up and off the screen.

       -dnum | --display-numeric

         Do not render the usual display, but instead display an integer representing the percent
         of  the  transfer  that  is complete, one integer per line.  This output is suitable for
         piping to other programs such as dialog(1) or zenity(1).  This implies  that  the  total
         transfer size must be known by bar, either by finding the size of an input file directly
         or by using the --size command line option.

         -dw | --display-wait
           Wait for the first byte of data to come through before displaying anything.

COLOR COMMAND LINE OPTIONS

       For the  following  color-specific  command  line  options,  the  following  keywords  are
       recognized  as  valid color names: normal, black, red, green, yellow, blue, magenta, cyan,
       and white

       -dan | --display-ansi
       -nan | --no-ansi

         Turn on/off the use of ansi color codes in the display.

       -spbg color | --space-background color

         Use color as the background color for spacing between display objects.  Default: normal

       -twfg color | --twiddle-foreground color
       -twbg color | --twiddle-background color

         Use color as the twiddle color in the display.  Default: normal

       -twb | --twiddle-bold
       -twn | --twiddle-normal

         Turn on/off the use of bold font when displaying the twiddle.  Default off

       -tifg color | --title-foreground color
       -tibg color | --title-background color

         Use color as the title color in the display.  Default: normal

       -tib | --title-bold
       -tin | --title-normal

         Turn on/off the use of bold font when displaying the title.  Default off

       -cfg color | --count-foreground color
       -cbg color | --count-background color

         Use color as the data count color in the display.  Default: normal

       -cb | --count-bold
       -cn | --count-normal

         Turn on/off the use of bold font when displaying the data count.  Default off

       -thlfg color | --throughput-label-foreground color
       -thlbg color | --throughput-label-background color

         Use color as the throughput label color in the display.  Default: normal

       -thlb | --throughput-label-bold
       -thln | --throughput-label-normal

         Turn on/off the use of bold font when displaying the throughput label.  Default off

       -thfg color | --throughput-foreground color
       -thbg color | --throughput-background color

         Use color as the throughput color in the display.  Default: normal

       -thb | --throughput-bold
       -thn | --throughput-normal

         Turn on/off the use of bold font when displaying the throughput.  Default off

       -tlfg color | --time-label-foreground color
       -tlbg color | --time-label-background color

         Use color as the time label color in the display.  Default: normal

       -tlb | --time-label-bold
       -tln | --time-label-normal

         Turn on/off the use of bold font when displaying the time label.  Default off

       -tfg color | --time-foreground color
       -tbg color | --time-background color

         Use color as the time color in the display.  Default: normal

       -tb | --time-bold
       -tn | --time-normal

         Turn on/off the use of bold font when displaying the time.  Default off

       -pfg color | --percent-foreground color
       -pbg color | --percent-background color

         Use color as the percent color in the display.  Default: normal

       -pb | --percent-bold
       -pn | --percent-normal

         Turn on/off the use of bold font when displaying the percent.  Default off

       -bbfg color | --bar-brace-foreground color
       -bbbg color | --bar-brace-background color

         Use color as the brace color around the progress bar in the display.  Default: normal

       -bbb | --bar-brace-bold
       -bbn | --bar-brace-normal

         Turn on/off the use of bold font when displaying the bar braces.  Default off

       -bfg color | --bar-foreground color
       -bbg color | --bar-background color

         Use color as the color of the progress bar in the display.  Default: normal

       -bb | --bar-bold
       -bn | --bar-normal

         Turn on/off the use of bold font when displaying the progress bar.  Default off

       -bobc | --bar-openbrace-char char

         char as the open brace character on the progress bar.

       -bcbc | --bar-closebrace-char char

         char as the close brace character on the progress bar.

       -bcc | --bar-complete-char char

         char as the completed character on the progress bar.

       -bic | --bar-incomplete-char char

         char as the incomplete character on the progress bar.

       -h | --help

         Display this text and exit.

       -v | --version

         Display the program version and exit.

RESOURCE FILE OPTIONS

       Some command line options may be specified in a resource file.   Bar  will  search  for  a
       resource  file  by the name of /etc/clpbarrc and, if found, bar will use the values within
       by default.  Next bar will search for ~/.barrc and, if found, bar will use these values to
       override  any  values  set  within /etc/clpbarrc.  Last, bar will search for a file in the
       current working directory named ./.barrc.  If this file exists, it's values will  override
       the  values  found in ~/.barrc or /etc/clpbarrc.  Values in all files may be overridden by
       command line flags.  Lines that begin with a # are ignored.

       For resource options requiring a boolean value, the following values  are  recognized:  on
       and  off,  yes  and  no, (and the single-character abbreviations y and n), true and false,
       (and the single-character abbreviations t and f), 0 and 1.

       For resource options requiring a color value, the same keywords are recognized as for  the
       color-specific  command  line  options  above:  normal,  black,  red, green, yellow, blue,
       magenta, cyan, and white

       buffer-size: buffer-size

         Allocate an I/O buffer of buffer-size bytes.  See the --buffer-size command line  option
         above.

       throttle: rate

         Restrict  I/O  throughput  to  rate  bytes  per second.  See the --throttle command line
         option above.

       interval: seconds

         Update the display every seconds seconds.  See the --interval command line option above.

       timeout: microseconds

         The number of microseconds to wait for a change in I/O state before select() times  out.
         See the --timeout command line option above.

       kilobyte: 1000|1024

         Use  either  1000  or 1024 as the definition of a kilobyte.  See the --kilo command line
         option above.

       block-size: size
         When parsing sizes specified in terms of blocks, assume a single block  is  size  bytes.
         See the --block-size command line option above.

       screen-width: width

         Override  termio and assume that the screen is width characters wide.  See the --screen-
         width command line option above.

       screen-width-minus-one: boolean

         Instruct bar to restrict the number of columns reported  by  termio  by  one.   See  the
         --screen-width-minus-one command line option above.

       display-twiddle: boolean

         Instruct  bar  to  turn  on/off  the twirling twiddle character in the display.  See the
         --display-twiddle command line option above.

       display-title: boolean

         Instruct bar to turn on/off the title in the display.  See the  --display-title  command
         line option above.

       display-count: boolean

         Instruct  bar  to  turn  on/off  the data count in the display.  See the --display-count
         command line option above.

       display-count-bits: boolean

         Display the data count as bits  instead  of  as  bytes.   See  the  --display-count-bits
         command line option above.

       display-throughput: boolean

         Instruct  bar  to  turn  on/off  the data throughput in the display.  See the --display-
         throughput command line option above.

       display-throughput-bits: boolean

         Display throughput as bits/sec instead of as bytes/sec.  See  the  --display-throughput-
         bits command line option above.

       display-time: boolean

         Instruct  bar  to  turn  on/off the time in the display.  See the --display-time command
         line option above.

       display-elapsed-only: boolean

         Force bar to display the elapsed time instead of the eta.   See  the  --display-elapsed-
         only command line option above.

       display-percent: boolean

         Instruct  bar  to  turn  on/off the percent complete in the display.  See the --display-
         percent command line option above.

       display-bar: boolean

         Instruct bar to turn on/off the progress bar in  the  display.   See  the  --display-bar
         command line option above.

       display-summary: boolean

         Instruct  bar  to  turn  on/off  the  summary  information  displayed  when operation is
         complete.  See the --display-summary command line option above.

       info-file: infofile
         Display the information contained in infofile while copying data.  The file infofile  is
         a  regular  text  file  containing tidbits of information broken up into sections.  Each
         section is separated by a line containing the string "@@@"  by  itself,  with  no  other
         characters on the line, either preceeding or following.

         When  bar  begins,  it will count the number of sections within the file.  Bar will then
         begin by displaying the first section of information to the display before it draws  the
         status  line.   Then, periodically, each of the successive sections will be displayed as
         the progress indicator fills up.

         The progress of the data transfer is the  trigger  for  each  successive  display.   For
         instance,  if  your  information  file  has  exactly four sections to it, then the first
         section will be printed as bar begins, the second section after the data  transfer  hits
         25%, the third at 50%, and the fourth at 75%.

         If  bar  is configured to use ANSI control codes, then the screen will be cleared before
         printing a section from the information file.  Otherwise, the contents  of  the  current
         screen are scolled up and off the screen.

       display-numeric: boolean
         Do not render the usual display, but instead display an integer representing the percent
         of the transfer that is complete, one integer per line.  This  output  is  suitable  for
         piping  to  other  programs such as dialog(1) or zenity(1).  This implies that the total
         transfer size must be known by bar, either by finding the size of an input file directly
         or by using the --size command line option.

       display-wait: boolean
         Wait for the first byte of data to come through before displaying anything.

       display-ansi: boolean

         Instruct  bar  to  turn  on/off  the  use  of  ansi color codes in the display.  See the
         --display-ansi command line option above.

       space-background: color

         Use color as the background color for spacing between display objects.  See the --space-
         background command line option above.

       twiddle-foreground: color
       twiddle-background: color
       twiddle-bold: boolean

         Use  the  specified  colors  for the foreground and background of the twiddle, and use a
         bold font.   See  the  --twiddle-foreground,  --twiddle-background,  and  --twiddle-bold
         command line options above.

       title: string

         Set the title string for the display.  See the --title command line option above.

       title-foreground: color
       title-background: color
       title-bold: boolean

         Use  the specified colors for the foreground and background of the title, and use a bold
         font.  See the --title-foreground, --title-background,  and  --title-bold  command  line
         options above.

       count-foreground: color
       count-background: color
       count-bold: boolean

         Use  the specified colors for the foreground and background of the data count, and use a
         bold font.  See the --count-foreground,  --count-background,  and  --count-bold  command
         line options above.

       throughput-label-foreground: color
       throughput-label-background: color
       throughput-label-bold: boolean

         Use  the specified colors for the foreground and background of the throughput label, and
         use a bold font.  See the --throughput-label-foreground,  --throughput-label-background,
         and --throughput-label-bold command line options above.

       throughput-foreground: color
       throughput-background: color
       throughput-bold: boolean

         Use  the specified colors for the foreground and background of the throughput, and use a
         bold font.  See the --throughput-foreground, --throughput-background, and  --throughput-
         bold command line options above.

       time-label-foreground: color
       time-label-background: color
       time-label-bold: boolean

         Use  the specified colors for the foreground and background of the time label, and use a
         bold font.  See the --time-label-foreground, --time-label-background, and  --time-label-
         bold command line options above.

       time-foreground: color
       time-background: color
       time-bold: boolean

         Use  the  specified colors for the foreground and background of the time, and use a bold
         font.  See  the  --time-foreground,  --time-background,  and  --time-bold  command  line
         options above.

       percent-foreground: color
       percent-background: color
       percent-bold: boolean

         Use  the  specified  colors  for the foreground and background of the percent, and use a
         bold font.   See  the  --percent-foreground,  --percent-background,  and  --percent-bold
         command line options above.

       bar-brace-foreground: color
       bar-brace-background: color
       bar-brace-bold: boolean

         Use  the specified colors for the foreground and background of the brace surrounding the
         progress bar, and  use  a  bold  font.   See  the  --bar-brace-foreground,  --bar-brace-
         background, and --bar-brace-bold command line options above.

       bar-foreground: color
       bar-background: color
       bar-bold: boolean
         Use  the specified colors for the foreground and background of the progress bar, and use
         a bold font.  See the --bar-foreground, --bar-background, and  --bar-bold  command  line
         options above.

       bar-openbrace-char: char
       bar-closebrace-char: char
       bar-complete-char: char
       bar-incomplete-char:
         Use  the  specified  custom  characters  char  for  the  opening  brace,  closing brace,
         completed, and incomplete characters when rendering the progress bar.

EXAMPLES

       Example 1: Using bar to copy a 2.4gb file from a device (in this case a tape drive)  to  a
       file, using a 64k buffer.

         prompt% bar --in-file /dev/rmt/1cbn --out-file \
         tape-restore.tar --size 2.4g --buffer-size 64k

       Example 2: Using bar to copy a 37tb file across the network using SSH.

         prompt% ssh remote 'dd if=file' | bar --size 37t > file

       Example 3: Using bar inside a tar-pipe command:

         Normal tar-pipe command might be:

           prompt% (cd /some/dir/somewhere && tar -cf - *) \
           | (cd /some/other/dir && tar -xBpf -)

         3a: Using bar within the tar-pipe:

           prompt% (cd /some/dir/somewhere && tar -cf - *) \
           | bar \
           | (cd /some/other/dir && tar -xBpf -)

         3b: Using bar with the --size option in a tar-pipe:

           prompt% du -sk /some/dir/somewhere
           6281954 /some/dir/somewhere

           prompt% (cd /some/dir/somewhere && tar -cf - *) \
           | bar --size 6281954k \
           | (cd /some/other/dir && tar -xBpf -)

       Example  4: Using bar on a regular file.  (Note that the --size option is not needed here,
       as bar will retrieve the file size itself.)

         prompt% bar --in-file ./file | ssh remote 'cd /some/dir && dd of=file'

       Example 5: Generating a 512k file of random data.

         prompt% dd if=/dev/random bs=1024 count=512 \
         | bar -s 512k -of ./random

       Example 6: An example .barrc file.
         #
         # This is an example of what a ~/.barrc file
         # might look like.  Note that lines beginning
         # with a # are ignored.
         #
         display-twiddle: no
         display-ansi: yes
         # space-background: black
         twiddle-foreground: green
         # twiddle-background: normal
         # twiddle-bold: no
         count-foreground: green
         # count-background: magenta
         count-bold: yes
         throughput-label-foreground: normal
         # throughput-label-background: red
         throughput-label-bold: no
         throughput-foreground: green
         # throughput-background: black
         throughput-bold: yes
         time-label-foreground: normal
         # time-label-background: red
         time-label-bold: no
         time-foreground: green
         # time-background: black
         time-bold: yes
         percent-foreground: green
         # percent-background: green
         percent-bold: yes
         bar-brace-foreground: red
         # bar-brace-background: blue
         bar-brace-bold: no
         bar-foreground: yellow
         # bar-background: blue
         bar-bold: yes

NOTES

       - The --size option is only  used  by  bar  in  calculating  information  about  the  data
         transfer.   Bar  will  not  cease  copying  data once it has reached the number of bytes
         specified with the --size option, but instead bar will continue to copy data  until  and
         end  of  input  is  reached.   If  this  behavior is undesirable then bar may be used in
         conjunction with dd, where the count option is used with dd to specify when to  cut  off
         the input stream.  (See examples above.)

       - When  using  other  commands  such  as  du  -k  to calculate the expected size of a data
         transfer stream, the value returned may not be exactly the number of  bytes  counted  by
         bar in the actual data transfer.  Common causes for this discrepancy could be attributed
         to round-off error or the use of 1000 bytes as a kilobyte rather  than  1024.   (If  the
         later  is  the  case,  then  using  the  -k  1000  option  to bar will help.)  When such
         discrepancies occur, bar may report that the data stream contained only 98% or  as  much
         as  101%  of it's expected size.  (If you have doubts, you should definitely verify your
         data using md5sum, diff, or cmp.)

       - When the value of a calculation exceeds the size alloted  for  the  display,  the  value
         +99...  will  be  substituted  in it's place.  The complete value will be displayed in a
         summary statement after bar has reached the end of input.

       - Bar assumes a linear relationship between the speed of the data transfer and the  amount
         of time remaining.  Specifically the calculation is based on the following:

         elapsed time / eta = bytes written / total size

         However,  it  has  been  the  author's experience that the throughput speed will change,
         particularly at the beginning of the transfer, and this will affect the  estimated  time
         remaining.   The author does not believe this is a bug, but a side-effect of this method
         of calculation.

       - Bar assumes that there are 8 bits in both a byte and a char.

BUGS

       - Bar uses the open() and fstat() functions to open and retrieve the size of regular files
         when  using  either  the --in-file or --out-file command line options.  Some OS's do not
         support Large Files (file sizes up to (2**63)-1  bytes)  natively.   Some  OS's  support
         Large  Files  but  require  _FILE_OFFSET_BITS  or _LARGE_FILES to be defined properly at
         compile time.  Other OS's support neither, but still allow programs  to  open  files  in
         excess  of  (2**32)-1  through  an  O_LARGEFILE  option that can be passed to the open()
         function.

         When trying to open files greater than 2gb on an OS without Large File support, bar will
         exit  with the message: "File too large".  When trying to write more than 2gb of data to
         a file, bar will write 2**32-1 bytes and then the OS may terminate bar  with  a  message
         similar to: "File size limit exceeded".

         When trying to open files greater than 2gb on an OS without Large File support, but with
         the O_LARGEFILE option that can be passed to open(), bar  will  receive  an  error  when
         trying to retrieve the file's size, but bar will be able to open the file anyway.  Under
         these circumstances, bar will print a "File too large"  error  message,  but  will  then
         proceed to transfer the data.  Since bar will not be able to retrieve the file's size on
         it's own, the --size command line option must be used after the --in-file option to tell
         bar  the file size manually.  On such OS's, bar should be able to write more than 2gb of
         data to a file without any problems.

         For OS's that support files greater than 2gb, either natively or through the Large  File
         extension definitions mentioned above, bar should work as expected.

       - The  author  has  noticed that when running bar over an SSH connection, sometimes window
         resize events are not captured until after the display has gone through one or two  more
         updates, which can cause the line to wrap.

       - The  author  has  noticed  that  on  some  systems the use of aligned memory allocation,
         through either memalign() or posix_memalign(), causes bar to commit a segmentation fault
         the first time read() or readv() is called and passed a pointer to the aligned memory as
         it's input buffer.  Attempts were made to try to isolate systems in which this bug bites
         through  tests in configure, but all tests devised passed with flying colors.  Therefore
         aligned memory allocation is turned off by default, and may only be enabled  by  passing
         --enable-use-memalign to configure when building the executable.

       - On  some 64-bit systems it has been found that the CC compiler will, by default, compile
         bar in 32-bit mode.   This  has  been  known  to  cause  math  errors  which  result  in
         segmentation  faults  and  infinite  loops.  Although multiple configure tests have been
         added to the compilation phase to try to properly detect such compilers  and  compensate
         for  such bugs, without access to such systems for debugging purposes there may be other
         bugs waiting to rear their ugly heads.

       Report all bugs to the author.

       Bar was developed on a Sun workstation running Solaris 8.  To the  best  of  the  author's
       knowledge  bar  should  compile  and  run on other platforms without much trouble.  Should
       other OS's require modifications to the code, the author welcomes all  patch  submissions,
       but  requests  that you include the file config.log and the output of gcc -dumpspecs (or a
       listing of predefined variables, if not using gcc).

DISTRIBUTION

       The latest version of bar can always be found at:
         http://www.freshmeat.net/projects/commandlineprogressbar
         http://sourceforge.net/projects/clpbar/

AUTHOR

       Bar was written by Michael Peek.  See DISTRIBUTION above for contact information.

       Occasionally, the author fancies that he knows what he's doing.  It is at these times more
       than ever that his coworkers should cower in fear...

                                         4 November 2003                                   BAR(1)