Provided by: dfu-util_0.9-1_amd64 bug

NAME

       dfu-util - Device firmware update (DFU) USB programmer

SYNOPSIS

       dfu-util  -l  [-v]  [-d vid:pid[,vid:pid]] [-p path] [-c configuration] [-i interface] [-a
              alt-intf] [-S serial[,serial]]

       dfu-util [-v] [-d vid:pid[,vid:pid]] [-p path] [-c configuration] [-i interface] [-a  alt-
              intf] [-S serial[,serial]] [-t size] [-Z size] [-s address] [-R] [-D|-U file]

       dfu-util [-hV]

DESCRIPTION

       dfu-util  is  a program that implements the host (computer) side of the USB DFU (Universal
       Serial Bus Device Firmware Upgrade) protocol.

       dfu-util communicates with devices that implement the device side of the USB DFU protocol,
       and is often used to upgrade the firmware of such devices.

OPTIONS

       -l, --list
              List the currently attached DFU capable USB devices.

       -d, --device [Run-Time VENDOR]:[Run-Time PRODUCT][,[DFU Mode VENDOR]:[DFU Mode PRODUCT]]
              Specify  run-time  and/or  DFU  mode vendor and/or product IDs of the DFU device to
              work with. VENDOR and PRODUCT are  hexadecimal  numbers  (no  prefix  needed),  "*"
              (match  any),  or "-" (match nothing). By default, any DFU capable device in either
              run-time or DFU mode will be considered.

              If you only have one standards-compliant DFU device attached to your computer, this
              parameter is optional. However, as soon as you have multiple DFU devices connected,
              dfu-util will detect this and abort, asking you to specify which device to use.

              If only run-time IDs are specified (e.g. "--device 1457:51ab"), then in addition to
              the  specified  run-time IDs, any DFU mode devices will also be considered. This is
              beneficial to allow a DFU capable device to be found again after a  switch  to  DFU
              mode, since the vendor and/or product ID of a device usually changes in DFU mode.

              If  only  DFU  mode  IDs are specified (e.g. "--device ,951:26"), then all run-time
              devices will be ignored, making it easy to target a specific device in DFU mode.

              If both run-time and DFU mode IDs are specified (e.g.  "--device  1457:51ab,:2bc"),
              then unspecified DFU mode components will use the run-time value specified.

              Examples:

              --device 1457:51ab,951:26
                     Work  with  a  device  in run-time mode with vendor ID 0x1457 and product ID
                     0x51ab, or in DFU mode with vendor ID 0x0951 and product ID 0x0026

              --device 1457:51ab,:2bc
                     Work with a device in run-time mode with vendor ID  0x1457  and  product  ID
                     0x51ab, or in DFU mode with vendor ID 0x1457 and product ID 0x02bc

              --device 1457:51ab
                     Work  with  a  device  in run-time mode with vendor ID 0x1457 and product ID
                     0x51ab, or in DFU mode with any vendor and product ID

              --device ,951:26
                     Work with a device in DFU mode with vendor ID 0x0951 and product ID 0x0026

              --device *,-
                     Work with any device in run-time mode, and ignore any device in DFU mode

              --device ,
                     Ignore any device in run-time mode, and Work with any device in DFU mode

       -p, --path BUS-PORT. ... .PORT
              Specify the path to the DFU device.

       -c, --cfg CONFIG-NR
              Specify the configuration of the DFU device.  Note  that  this  is  only  used  for
              matching, the configuration is not set by dfu-util.

       -i, --intf INTF-NR
              Specify the DFU interface number.

       -a, --alt ALT
              Specify the altsetting of the DFU interface by name or by number.

       -S, --serial [Run-Time SERIAL][,[DFU Mode SERIAL]]
              Specify  the  run-time  and DFU mode serial numbers used to further restrict device
              matches.  If multiple, identical DFU devices  are  simultaneously  connected  to  a
              system  then  vendor  and  product  ID  will be insufficient for targeting a single
              device.  In this situation, it may be possible to use this parameter to  specify  a
              serial number which also must match.

              If only a single serial number is specified, then the same serial number is used in
              both run-time and DFU mode. An empty serial number will match any serial number  in
              the corresponding mode.

       -t, --transfer-size  SIZE
              Specify  the  number  of  bytes  per  USB  transfer.  The  optimal value is usually
              determined automatically so this option is rarely useful. If you need to  use  this
              option for a device, please report it as a bug.

       -Z, --upload-size  SIZE
              Specify the expected upload size, in bytes.

       -U, --upload FILE
              Read firmware from device into FILE.

       -D, --download FILE
              Write  firmware  from  FILE  into device. When FILE is -, the firmware is read from
              stdin.

       -R, --reset
              Issue USB reset signalling after upload or download has finished.

       -s, --dfuse-address address
              Specify target address for raw binary download/upload on DfuSe devices. Do not  use
              this  for  downloading  DfuSe  (.dfu) files. Modifiers can be added to the address,
              separated by a colon, to perform special DfuSE commands such as "leave"  DFU  mode,
              "unprotect" and "mass-erase" flash memory.

       -v, --verbose
              Print more information about dfu-util's operation. A second -v will turn on verbose
              logging of USB requests. Repeat this option to further increase verbosity.

       -h, --help
              Show a help text and exit.

       -V, --version
              Show version information and exit.

EXAMPLES

   Using dfu-util in the OpenMoko project
       (with the Neo1973 hardware)

       Flashing the rootfs:
         $ dfu-util -a rootfs -R -D /path/to/openmoko-devel-image.jffs2

       Flashing the kernel:
         $ dfu-util -a kernel -R -D /path/to/uImage

       Flashing the bootloader:
         $ dfu-util -a u-boot -R -D /path/to/u-boot.bin

       Copying a kernel into RAM:
         $ dfu-util -a 0 -R -D /path/to/uImage

       Once this has finished, the kernel will be  available  at  the  default  load  address  of
       0x32000000 in Neo1973 RAM.  Note: You cannot transfer more than 2MB of data into RAM using
       this method.

   Using dfu-util with a DfuSe device
       Flashing a .dfu (special DfuSe format) file to the device:
         $ dfu-util -a 0 -D /path/to/dfuse-image.dfu

       Reading out 1 KB of flash starting at address 0x8000000:
         $ dfu-util -a 0 -s 0x08000000:1024 -U newfile.bin

       Flashing a binary file to address 0x8004000 of device memory and ask the device  to  leave
       DFU mode:
         $ dfu-util -a 0 -s 0x08004000:leave -D /path/to/image.bin

BUGS

       Please  report  any  bugs  to  the  dfu-util  bug tracker at http://sourceforge.net/p/dfu-
       util/tickets/.  Please use the --verbose option (repeated as necessary)  to  provide  more
       information in your bug report.

SEE ALSO

       The dfu-util home page is http://sourceforge.net/p/dfu-util/

HISTORY

       dfu-util   was   originally   written   for   the   OpenMoko  project  by  Weston  Schmidt
       <weston_schmidt@yahoo.com> and Harald Welte <hwelte@hmw-consulting.de>. Over time,  nearly
       complete support of DFU 1.0, DFU 1.1 and DfuSe ("1.1a") has been added.

LICENCE

       dfu-util is covered by the GNU General Public License (GPL), version 2 or later.

COPYRIGHT

       This  manual  page  was originally written by Uwe Hermann <uwe@hermann-uwe.de>, and is now
       part of the dfu-util project.

                                        September 23, 2012                            DFU-UTIL(1)