Provided by: mailavenger_0.8.4-4.1_amd64 bug

NAME

       match - Match strings against glob paterns

SYNOPSIS

       match [-gilrqs] [-n <n>] [-c cmd] [-x code] {[-p] pattern | -f <file>} str1 [str2 ...]

DESCRIPTION

       match checks strings against pattern, which should be a shell-like glob pattern.  pattern
       may contain the following special characters:

       ?   A "?" character in pattern matches any single character in the string, except that the
           "/" character is only matched if match was given the -s option.

       *   A "*" character in pattern matches zero or more characters in the string.  The
           exception is that it will only match "/" characters if match was given the -s option.

       [...]
           A set of characters between square brackets matches any character in the set.  In
           addition, the "-" character can be used to specify a range.  For example "[+e0-3]"
           would match any of the characters "+", "e", 0, 1, 2, or 3 in the input string.  To
           include a hyphen ("-") in the set of characters matched, either include the hyphen
           first or last, or escape it with a "\".

       [!...]
           A character class preceded by a "!" matches any character but those specified in the
           class.  The exception is that the negated character class will match a "/" only if
           match was given the -s option.

       \c  The backslash character escapes the next character c.  Thus, to match a literal "*",
           you would use the pattern "\*".

       match prints each string that matches pattern, one per line, and exits 0 if one or more
       strings matched.  If no string matches, match exits with status 67 (or whatever alternate
       status was specified by the -x flag).  If the -n n flag was specified, match prints only
       the text that matched the nth occurrence of "*" in the patten.

   OPTIONS
       -f file
           Specifies that the pattern should be read from file.  match will read each line of the
           file and consider it as pattern to match against the argument strings.  For each
           argument string, match stops when it hits the first matching line of the file.  If
           file does not exist, match exits 67, or whatever code was specified by -x.

       -g  Normally, the -n option selects text matching particular "*" characters in the patern.
           -g changes this behavior to use parentheses for grouping.  Thus, for instance, the
           text "foo.c" would match pattern "*(.[ch])", and the output with option -n 1 would be
           ".c".  To include a literal "(" or ")" in the pattern with the -g option, you must
           precede the character with a "\".

       -i  Makes the match case insensitive.  str will be considered to match if any variation on
           its capitalization would match.  For example, string "G" would match pattern "[f-h]".

       -l  When a pattern matches the string in more than one way, the -l flag says to assign as
           much text as possible to the leftmost "*"s in the pattern.  For example, pattern "*+*"
           would match text "a+b+c", and the first "*" would match "a+b".  This behavior is the
           default, thus -l's effect is only to undo a previous -r flag.

       -n n
           With this flag, match prints the text that matched the nth "*" in the pattern, as
           opposed to printing the whole string.  The leftmost "*" corresponds to -n 1.
           Specifying -n 0 causes match to print the whole matching string.  Specifying -n -1 or
           using a value greater than the number of "*"s in the pattern causes match not to print
           anything, in which case you can still use the exit status to see if there is a match.
           The default value for n is 0, unless -g has also been specified, in which case the
           default is 1.

       -c command
           When -c is specified, match runs command with the system shell (/bin/sh), giving it as
           argument $0 the full string that matched, and as arguments $1, $2, etc., the parts of
           the string that matched any "*"s in pattern.  If the command does not exit with status
           0, match will exit immediately, before processing further matches, with whatever
           status command returned.  The -c and -n flags are mutually exclusive.

       -p pattern
           Specifies the pattern to match against.  The -p flag is optional; you can specify
           pattern as the first argument following the options.  However, if you want to try
           matching the same input string against multiple patterns, then you must specify each
           pattern with a -p flag.

       -q  This option is synonymous with -n -1; it suppresses output when there is a match.  You
           can still determine whether a match occurred by the exit status.

       -r  When a pattern matches the string in more than one way, the -r flag says to assign as
           much text as possible to the rightmost "*"s in the pattern.  For example, with -r,
           pattern "*+*" would match text "a+b+c" with the "*" matching "a", and the second
           matching "b+c".

       -s  Ordinarily, "*", "?", and negated character classes ("[!...]") do not match "/"
           characters.  -s changes this behavior to match slashes.

       -x code
           By default, when there is no match, match exits with status 67.  With this option,
           match exits with status code, instead.

EXAMPLES

       Suppose you have a directory with a bunch of files ending .c and .o.  If, for each file
       named foo.c you want to attempt to delete the file foo.o, you can run the following
       command:

            match -p '*.c' -c 'rm -f $1.o' *.c

       Servers running the mailman list manager often send mail from bounce addresses of the form
       listname-bounces@host.com.  If you subscribe to multiple lists on the same server, the
       mailman interface makes it easier if you subscribe under the same address.  To split the
       mail into multiple folders based on the bounce address in the environment variable SENDER,
       you might chose a mailbox with the following shell code:

            name=`match -n1 "*-bounces@host.com" "$SENDER"` \
                 && echo "$HOME/Mail/incoming/host-$name.spool"

SEE ALSO

       avenger(1), avenger.local(8)

       The Mail Avenger home page: <http://www.mailavenger.org/>.

AUTHOR

       David Mazieres