Provided by: plastimatch_1.7.0+dfsg.1-1_amd64 
NAME
plastimatch - register, convert, warp, or manipulate images
SYNOPSIS
plastimatch command [options]
DESCRIPTION
The plastimatch executable is used for a variety of operations on either 2D or 3D images,
including image registration, warping, resampling, and file format conversion. The form
of the options depends upon the command given. The list of possible commands can be seen
by simply typing "plastimatch" without any additional command line arguments:
$ plastimatch
plastimatch version 1.7.0
Usage: plastimatch command [options]
Commands:
add adjust average bbox boundary
crop compare compose convert dice
diff dmap dose dvh fill
filter gamma header jacobian mabs
mask maximum ml-convert multiply probe
register resample scale segment stats
synth synth-vf threshold thumbnail union
vf-invert warp xf-convert
For detailed usage of a specific command, type:
plastimatch command
PLASTIMATCH ADD
The add command is used to add one or more images together and create an output image.
The contributions of the input images can be weighted with a weight vector.
The command line usage is given as follows:
Usage: plastimatch add [options] input_file [input_file ...]
Options:
--average produce an output file which is the average of the
input files (if no weights are specified), or
multiply the weights by 1/n
--output <arg> output image
--weight <arg> specify a vector of weights; the images are
multiplied by the weight prior to adding their
values
Examples
To add together files 01.mha, 02.mha and 03.mha, and save the result in the file
output.mha, you can run the following command:
plastimatch add --output output.mha 01.mha 02.mha 03.mha
If you wanted output.mha to be 2 * 01.mha + 0.5 * 02.mha + 0.1 * 03.mha, then you should
do this:
plastimatch add \
--output output.mha \
--weight "2 0.5 0.1" \
01.mha 02.mha 03.mha
PLASTIMATCH ADJUST
The adjust command is used to adjust the intensity values within an image. The adjustment
operations available are truncation and linear scaling.
The command line usage is given as follows:
Usage: plastimatch adjust [options]
Required:
--input <arg> input directory or filename
--output <arg> output image
Optional:
--pw-linear <arg> a string that forms a piecewise linear
map from input values to output values,
of the form "in1,out1,in2,out2,..."
The adjust command can be used to make a piecewise linear adjustment of the image
intensities. The --pw-linear option is used to create the mapping from input intensities
to output intensities. The input intensities in the curve must increase from left to
right in the string, but output intensities are arbitrary.
Input intensities below the first pair or after the last pair are transformed by
extrapolating the curve out to infinity with a slope of +1. A different slope may be
specified out to positive or negative infinity by specifying the special input values of
-inf and +inf. In this case, the second number in the pair is the slope of the curve, not
the output intensity.
Examples
The following command will add 100 to all voxels in the image:
plastimatch adjust \
--input infile.nrrd \
--output outfile.nrrd \
--pw-linear "0,100"
The following command does the same thing, but with explicit specification of the slope in
the extrapolation area:
plastimatch adjust \
--input infile.nrrd \
--output outfile.nrrd \
--pw-linear "-inf,1,0,100,inf,1"
The following command truncates the inputs to the range of [-1000,+1000]:
plastimatch adjust \
--input infile.nrrd \
--output outfile.nrrd \
--pw-linear "-inf,0,-1000,-1000,+1000,+1000,inf,0"
PLASTIMATCH AVERAGE
The average command is used to compute the (weighted) average of multiple input images.
It is the same as the plastimatch add command, with the --average option specified.
Please refer to plastimatch add for the list of command line arguments.
Example
The following command will compute the average of three input images:
plastimatch average \
--output outfile.nrrd \
01.mha 02.mha 0.3.mha
PLASTIMATCH AUTOLABEL
The autolabel command is an experimental program the uses machine learning to identify the
thoracic vertibrae in a CT scan.
The command line usage is given as follows:
Usage: plastimatch autolabel [options]
Options:
-h, --help Display this help message
--input <arg> Input image filename (required)
--network <arg> Input trained network filename (required)
--output <arg> Output csv filename (required)
PLASTIMATCH BOUNDARY
The boundary command takes a binary label image as input, and generates an image of the
image boundary as the output. The boundary is defined as the voxels within the label
which have neighboring voxels outside the label.
The command line usage is given as follows:
Usage: plastimatch boundary [options] input_file
Required:
--output <arg> filename for output image
PLASTIMATCH CROP
The crop command crops out a rectangular portion of the input file, and saves that portion
to an output file. The command line usage is given as follows:
Usage: plastimatch crop [options]
Required:
--input=image_in
--output=image_out
--voxels="x-min x-max y-min y-max z-min z-max" (integers)
The voxels are indexed starting at zero. In other words, if the size of the image is M
imes N imes P, the x values should range between 0 and M-1.
Example
The following command selects the region of size 10 imes 10 imes 10, with the first voxel
of the output image being at location (5,8,12) of the input image:
plastimatch crop \
--input in.mha \
--output out.mha \
--voxels "5 14 8 17 12 21"
PLASTIMATCH COMPARE
The compare command compares two files by subtracting one file from the other, and
reporting statistics of the difference image. The two input files must have the same
geometry (origin, dimensions, and voxel spacing). The command line usage is given as
follows:
Usage: plastimatch compare image_in_1 image_in_2
Example
The following command subtracts synth_2 from synth_1, and reports the statistics:
$ plastimatch compare synth_1.mha synth_2.mha
MIN -558.201904 AVE 7.769664 MAX 558.680847
MAE 85.100204 MSE 18945.892578
DIF 54872 NUM 54872
The reported statistics are interpreted as follows:
MIN Minimum value of difference image
AVE Average value of difference image
MAX Maximum value of difference image
MAE Mean average value of difference image
MSE Mean squared difference between images
DIF Number of pixels with different intensities
NUM Total number of voxels in the difference image
PLASTIMATCH COMPOSE
The compose command is used to compose two transforms. The command line usage is given as
follows:
Usage: plastimatch compose file_1 file_2 outfile
Note: file_1 is applied first, and then file_2.
outfile = file_2 o file_1
x -> x + file_2(x + file_1(x))
The transforms can be of any type, including translation, rigid, affine, itk B-spline,
native B-spline, or vector fields. The output file is always a vector field.
There is a further restriction that at least one of the input files must be either a
native B-spline or vector field. This restriction is required because that is how the
resolution and voxel spacing of the output vector field is chosen.
Example
Suppose we want to compose a rigid transform (rigid.tfm) with a vector field (vf.mha),
such that the output transform is equivalent to applying the rigid transform first, and
the vector field second.
plastimatch compose rigid.tfm vf.mha composed_vf.mha
PLASTIMATCH CONVERT
The convert command is used to convert files from one format to another format. As part
of the conversion process, it can also apply (linear or deformable) geometric transforms
to the input images. In fact, convert is just an alias for the warp command.
The command line usage is given as follows:
Usage: plastimatch convert [options]
Options:
--algorithm <arg> algorithm to use for warping, either
"itk" or "native", default is native
--ctatts <arg> ct attributes file (used by dij warper)
--default-value <arg> value to set for pixels with unknown
value, default is 0
--dicom-with-uids <arg> set to false to remove uids from created
dicom filenames, default is true
--dif <arg> dif file (used by dij warper)
--dim <arg> size of output image in voxels "x [y z]"
--direction-cosines <arg>
oriention of x, y, and z axes; Specify
either preset value,
{identity,rotated-{1,2,3},sheared}, or 9
digit matrix string "a b c d e f g h i"
--dose-scale <arg> scale the dose by this value
--fixed <arg> fixed image (match output size to this
image)
--input <arg> input directory or filename; can be an
image, structure set file (cxt or
dicom-rt), dose file (dicom-rt,
monte-carlo or xio), dicom directory, or
xio directory
--input-cxt <arg> input a cxt file
--input-dose-ast <arg> input an astroid dose volume
--input-dose-img <arg> input a dose volume
--input-dose-mc <arg> input an monte carlo volume
--input-dose-xio <arg> input an xio dose volume
--input-prefix <arg> input a directory of structure set
images (one image per file)
--input-ss-img <arg> input a structure set image file
--input-ss-list <arg> input a structure set list file
containing names and colors
--interpolation <arg> interpolation to use when resampling,
either "nn" for nearest neighbors or
"linear" for tri-linear, default is
linear
--metadata <arg> patient metadata (you may use this
option multiple times), option written
as "XXXX,YYYY=string"
--modality <arg> modality metadata: such as {CT, MR, PT},
default is CT
--origin <arg> location of first image voxel in mm "x y
z"
--output-colormap <arg> create a colormap file that can be used
with 3d slicer
--output-cxt <arg> output a cxt-format structure set file
--output-dicom <arg> create a directory containing dicom and
dicom-rt files
--output-dij <arg> create a dij matrix file
--output-dose-img <arg> create a dose image volume
--output-img <arg> output image; can be mha, mhd, nii,
nrrd, or other format supported by ITK
--output-labelmap <arg> create a structure set image with each
voxel labeled as a single structure
--output-pointset <arg> create a pointset file that can be used
with 3d slicer
--output-prefix <arg> create a directory with a separate image
for each structure
--output-prefix-fcsv <arg>
create a directory with a separate fcsv
pointset file for each structure
--output-ss-img <arg> create a structure set image which
allows overlapping structures
--output-ss-list <arg> create a structure set list file
containing names and colors
--output-type <arg> type of output image, one of {uchar,
short, float, ...}
--output-vf <arg> create a vector field from the input xf
--output-xio <arg> create a directory containing xio-format
files
--patient-id <arg> patient id metadata: string
--patient-name <arg> patient name metadata: string
--patient-pos <arg> patient position metadata: one of
{hfs,hfp,ffs,ffp}
--prefix-format <arg> file format of rasterized structures,
either "mha" or "nrrd"
--prune-empty delete empty structures from output
--referenced-ct <arg> dicom directory used to set UIDs and
metadata
--series-description <arg>
series description metadata: string
--simplify-perc <arg> delete <arg> percent of the vertices
from output polylines
--spacing <arg> voxel spacing in mm "x [y z]"
--version display the program version
--xf <arg> input transform used to warp image(s)
--xor-contours overlapping contours should be xor'd
instead of or'd
Examples
The first example demonstrates how to convert a DICOM volume to NRRD. The DICOM images
that comprise the volume must be stored in a single directory, which for this example is
called "dicom-in-dir". Because the --output-type option was not specified, the output
type will be matched to the type of the input DICOM volume. The format of the output file
(NRRD) is determined from the filename extension.
plastimatch convert \
--input dicom-in-dir \
--output-img outfile.nrrd
This example further converts the type of the image intensities to float.
plastimatch convert \
--input dicom-in-dir \
--output-img outfile.nrrd \
--output-type float
The next example shows how to resample the output image to a different geometry. The
--origin option sets the position of the (center of) the first voxel of the image, the
--dim option sets the number of voxels, and the --spacing option sets the distance between
voxels. The units for origin and spacing are assumed to be millimeters.
plastimatch convert \
--input dicom-in-dir \
--output-img outfile.nrrd \
--origin "-200 -200 -165" \
--dim "250 250 110" \
--spacing "2 2 2.5"
Generally speaking, it is tedious to manually specify the geometry of the output file. If
you want to match the geometry of the output file with an existing file, you can do this
using the --fixed option.
plastimatch convert \
--input dicom-in-dir \
--output-img outfile.nrrd \
--fixed reference.nrrd
This next example shows how to convert a DICOM RT structure set file into an image using
the --output-ss-img option. Because structures in DICOM RT are polylines, they are
rasterized to create the image. The voxels of the output image are 32-bit integers, where
the i^th bit of each integer has value one if the voxel lies with in the corresponding
structure, and value zero if the voxel lies outside the structure. The structure names
are stored in separate file using the --output-ss-list option.
plastimatch convert \
--input structures.dcm \
--output-ss-img outfile.nrrd \
--output-ss-list outfile.txt
In the previous example, the geometry of the output file wasn't specified. When the
geometry of a DICOM RT structure set isn't specified, it is assumed to match the geometry
of the DICOM (CT, MR, etc) image associated with the contours. If the associated DICOM
image is in the same directory as the structure set file, it will be found automatically.
Otherwise, we have to tell plastimatch where it is located with the --referenced-ct
option.
plastimatch convert \
--input structures.dcm \
--output-ss-img outfile.nrrd \
--output-ss-list outfile.txt \
--referenced-ct ../image-directory
PLASTIMATCH DICE
The plastimatch dice compares binary label images using Dice coefficient, Hausdorff
distance, or contour mean distance. The input images are treated as boolean, where
non-zero values mean that voxel is inside of the structure and zero values mean that the
voxel is outside of the structure.
The command line usage is given as follows:
Usage: plastimatch dice [options] reference-image test-image
Options:
--all Compute Dice, Hausdorff, and contour mean
distance (equivalent to --dice --hausdorff
--contour-mean)
--contour-mean Compute contour mean distance
--dice Compute Dice coefficient (default)
--hausdorff Compute Hausdorff distance and average Hausdorff
distance
Example
The following command computes all three statistics for mask1.mha and mask2.mha:
plastimatch dice --all mask1.mha mask2.mha
PLASTIMATCH DIFF
The plastimatch diff command subtracts one image from another, and saves the output as a
new image. The two input files must have the same geometry (origin, dimensions, and voxel
spacing).
The command line usage is given as follows:
Usage: plastimatch diff image_in_1 image_in_2 image_out
Example
The following command computes file1.nrrd minus file2.nrrd, and saves the result in
outfile.nrrd:
plastimatch diff file1.nrrd file2.nrrd outfile.nrrd
PLASTIMATCH DMAP
The plastimatch dmap command takes a binary label image as input, and creates a distance
map image as the output. The output image has the same image geometry (origin,
dimensions, voxel spacing) as the input image.
The command line usage is given as follows:
Usage: plastimatch dmap [options]
Required:
--input <arg> input directory or filename
--output <arg> output image
Optional:
--algorithm <arg> a string that specifies the algorithm used
for distance map calculation, either
"maurer", "danielsson", or "itk-danielsson"
(default is "danielsson")
--inside-positive voxels inside the structure should be
positive (by default they are negative)
--maximum-distance <arg>
voxels with distances greater than this
number will have the distance truncated to
this number
--squared-distance return the squared distance instead of
distance
Example
The following command computes a distance map file dmap.nrrd from a binary labelmap image
label.nrrd.:
plastimatch dmap --input label.nrrd --output dmap.nrrd
PLASTIMATCH DRR
This command is under construction.
PLASTIMATCH DVH
The dvh command creates a dose value histogram (DVH) from a given dose image and structure
set image. The command line usage is given as follows:
Usage: plastimatch dvh [options]
--input-ss-img file
--input-ss-list file
--input-dose file
--output-csv file
--input-units {gy,cgy}
--cumulative
--num-bins
--bin-width
The required inputs are --input-dose, --input-ss-img, --input-ss-list, and --output-csv.
The units of the input dose must be either Gy or cGy. DVH bin values will be generated
for all structures found in the structure set files. The output will be generated as an
ASCII csv-format spreadsheet file, readable by OpenOffice.org or Microsoft Excel.
The default is a differential (standard) histogram, rather than the cumulative DVH which
is most common in radiotherapy. To create a cumulative DVH, use the --cumulative option.
The default is to create 256 bins, each with a width of 1 Gy. You can adjust these values
using the --num-bins and --bin-width option.
Example
To generate a DVH for a single 2 Gy fraction, we might choose 250 bins each of width 1
cGy. If the input dose is already specified in cGy, you would use the following command:
plastimatch dvh \
--input-ss-img structures.mha \
--input-ss-list structures.txt \
--input-dose dose.mha \
--output-csv dvh.csv \
--input-units cgy \
--num-bins 250 \
--bin-width 1
PLASTIMATCH FILL
The fill command is used to fill an image region with a constant intensity. The region
filled is defined by a mask file, with voxels with non-zero intensity in the mask image
being filled.
The command line usage is given as follows:
Usage: plastimatch fill [options]
Options:
--input <arg> input directory or filename; can be an image
or dicom directory
--mask <arg> input filename for mask image
--mask-value <arg> value to set for pixels within mask (for
"fill"), or outside of mask (for "mask"
--output <arg> output filename (for image file) or directory
(for dicom)
--output-format <arg> arg should be "dicom" for dicom output
--output-type <arg> type of output image, one of {uchar, short,
float, ...}
Examples
Suppose we have a file prostate.nrrd which is zero outside of the prostate, and non-zero
inside of the prostate. We can fill the prostate with an intensity of 1000, while leaving
non-prostate areas with their original intensity, using the following command.
plastimatch fill \
--input infile.nrrd \
--output outfile.nrrd \
--mask-value 1000 \
--mask prostate.nrrd
PLASTIMATCH FILTER
The filter command applies a filter to an input image, and creates a filtered image as its
output. The filter can be either built-in, or custom.
The command line usage is given as follows:
Usage: plastimatch filter [options] input_image
Options:
--gabor-k-fib <arg> choose gabor direction at index i within
fibonacci spiral of length n; specified as
"i n" where i and n are integers, and i is
between 0 and n-1
--gauss-width <arg> the width (in mm) of a uniform Gaussian
smoothing filter
--kernel <arg> kernel image filename
--output <arg> output image filename
--output-kernel <arg> output kernel filename
--pattern <arg> filter type: {gabor, gauss, kernel},
default is gauss
The built-in filters supported are "gabor" and "gauss". For a Gaussian, the width of the
Gaussian can be controlled using the --gauss-width option. The Gabor filter is currently
limited to automatic selection of filter directions, which are spaced quasi-uniformly on
the unit sphere. Custom filters are specified by supplying a kernel file, which is
convolved with the image.
Example
The following command will generate a filtered image from the first gabor filter within a
bank of 10 filters.:
plastimatch filter --pattern gabor Testing/rect-1.mha \
--gabor-k-fib "0 5" --output g-05.mha
PLASTIMATCH GAMMA
The gamma command compares two images using the so-called gamma criterion. The gamma
criterion specifies that images are similar at a givel location within a reference image
if there exists a voxel with similar intensity nearby in the comparison image. Both local
gamma and global gamma can be performed using this command.
The command line usage is given as follows:
Usage: plastimatch gamma [options] image_1 image_2
Options:
--analysis-threshold <arg>
Analysis threshold for dose in float (for
example, input 0.1 to apply 10% of the
reference dose). The final threshold dose
(Gy) is calculated by multiplying this
value and a given reference dose (or
maximum dose if not given). (default is
0.1)
--compute-full-region With this option, full gamma map will be
generated over the entire image region
(even for low-dose region). It is
recommended not to use this option to
speed up the computation. It has no
effect on gamma pass-rate.
--dose-tolerance <arg> The scaling coefficient for dose
difference. (e.g. put 0.02 if you want to
apply 2% dose difference criterion)
(default is 0.03)
--dta-tolerance <arg> The distance-to-agreement (DTA) scaling
coefficient in mm (default is 3)
--gamma-max <arg> The maximum value of gamma to compute;
smaller values run faster (default is
2.0)
--inherent-resample <arg>
Spacing value in [mm]. The reference
image itself will be resampled by this
value (Note: resampling compare-image to
ref-image is inherent already). If arg <
0, this option is disabled. (default is
-1.0)
--interp-search With this option, smart interpolation
search will be used in points near the
reference point. This will eliminate the
needs of fine resampling. However, it
will take longer time to compute.
--local-gamma With this option, dose difference is
calculated based on local dose
difference. Otherwise, a given reference
dose will be used, which is called
global-gamma.
--output <arg> Output image
--output-failmap <arg> File path for binary gamma evaluation
result.
--output-text <arg> Text file path for gamma evaluation
result.
--reference-dose <arg> The prescription dose (Gy) used to
compute dose tolerance; if not specified,
then maximum dose in reference volume is
used
--resample-nn With this option, Nearest Neighbor will
be used instead of linear interpolation
in resampling the compare-image to the
reference image. Not recommended for
better results.
Example
A gamma image is produced from two input images using the default parameters. This will
be a global gamma, using maximum intensity of the reference image as the gamma
normalization value.:
plastimatch gamma --output gamma.mha \
reference-image.mha compare-image.mha
PLASTIMATCH HEADER
The header command is used to display simple properties about the volume, such as the
image data type and image geometry.
The command line usage is given as follows:
Usage: plastimatch header [options] input_file [input_file ...]
Options:
-h, --help display this help message
--version display the program version
Example
We can display the geometry of any supported file type, such as mha, nrrd, or dicom. We
can run the command as follows:
$ plastimatch header input.mha
Type = float
Planes = 1
Origin = -180 -180 -167.75
Size = 512 512 120
Spacing = 0.7031 0.7031 2.5
Direction = 1 0 0 0 1 0 0 0 1
From the header information, we see that the image has 120 slices, and each slice is 512 x
512 pixels. The slice spacing is 2.5 mm, and the in-plane pixel spacing is 0.7031 mm.
PLASTIMATCH JACOBIAN
The jacobian command computes the Jacobian determinant of a vector field. Either a
Jacobian determinant image, or its summary statistics, can be computed.
The command line usage is given as follows:
Usage: plastimatch jacobian [options]
Options:
--input <arg> input directory or filename of image
--output-img <arg> output image; can be mha, mhd, nii, nrrd,
or other format supported by ITK
--output-stats <arg> output stats file; .txt format
Example
To create a Jacobian determinant image from a vector field file vf.mha, run the following:
plastimatch jacobian \
--input vf.mha --output-img vf_jac.mha
PLASTIMATCH MABS
The mabs command performs a multi-atlas based segmentation (MABS) operation. The command
can operate in one of several training mode, or in segmentation mode.
The command line usage is given as follows:
Usage: plastimatch mabs [options] command_file
Options:
--atlas-selection run just atlas selection
--convert pre-process atlas
--output <arg> output (non-dicom) directory when doing
a segmentation
--output-dicom <arg> output dicom directory when doing a
segmentation
--pre-align pre-process atlas
--segment <arg> use mabs to segment the specified image
or directory
--train perform full training to find the best
registration and segmentation parameters
--train-atlas-selection run just train atlas selection
--train-registration perform limited training to find the
best registration parameters only
Prior to running the mabs command, you must create a configuration file, and you must
arrange your training data into the proper directory format. For a complete description
of the command file syntax and usage examples, please refer to the mabs_guidebook and the
segmentation_command_file_reference.
PLASTIMATCH MASK
The mask command is used to fill an image region with a constant intensity. The region
filled is defined by a mask file, with voxels with zero intensity in the mask image being
filled. Thus, it is the inverse of the fill command.
The command line usage is given as follows:
Usage: plastimatch mask [options]
Options:
--input <arg> input directory or filename; can be an
image or dicom directory
--mask <arg> input filename for mask image
--mask-value <arg> value to set for pixels within mask (for
"fill"), or outside of mask (for "mask"
--output <arg> output filename (for image file) or
directory (for dicom)
--output-format <arg> arg should be "dicom" for dicom output
--output-type <arg> type of output image, one of {uchar, short,
float, ...}
Examples
Suppose we have a file called patient.nrrd, which is zero outside of the patient, and
non-zero inside the patient. If we want to fill in the area outside of the patient with
value -1000, we use the following command.
plastimatch mask \
--input infile.nrrd \
--output outfile.nrrd \
--negate-mask \
--mask-value -1000 \
--mask patient.nrrd
PLASTIMATCH ML-CONVERT
To be written.
PLASTIMATCH PROBE
The plastimatch probe command is used to examine the image intensity or vector field
displacement at one or more positions within a volume. The probe positions can be
specified in world coordinates (in mm), using the --location option, or as image indices
using the --index option. The locations or indices are linearly interpolated if they lie
between voxels.
The command line usage is given as follows:
Usage: plastimatch probe [options] file
Options:
-i, --index <arg> List of voxel indices, such as
"i j k;i j k;..."
-l, --location <arg> List of spatial locations, such as
"i j k;i j k;..."
The command will output one line for each probe requested. Each output line includes the
following fields.:
PROBE# The probe number, starting with zero
INDEX The (fractional) position of the probe as a voxel index
LOC The position of the probe in world coordinates
VALUE The intensity (for volumes) or displacement
(for vector fields)
Example
We use the index option to see an image intensity at coordinate (2,3,4), and the location
option to see image intensities at two different locations:
plastimatch probe \
--index "2 3 4" \
--location "0 0 0; 0.5 0.5 0.5" \
infile.nrrd
The output will include three probe results. Each probe shows the probe index, voxel
index, voxel location, and intensity.
0: 2.00, 3.00, 4.00; -22.37, -21.05, -19.74; -998.725891
1: 19.00, 19.00, 19.00; 0.00, 0.00, 0.00; -0.000197
2: 19.38, 19.38, 19.38; 0.50, 0.50, 0.50; -9.793450
PLASTIMATCH REGISTER
The plastimatch register command is used to peform linear or deformable registration of
two images. The command line usage is given as follows:
Usage: plastimatch register command_file
The command file is an ordinary text file, which contains a single global section and one
or more stages sections. The global section begins with a line containing only the string
"[GLOBAL]", and each stage begins with a line containing the string "[STAGE]".
The global section is used to set input files, output files, and global parameters, while
the each stage section defines a sequential stage of processing. For a complete
description of the command file syntax, please refer to the
registration_command_file_reference.
Examples
If you want to register image_2.mha to match image_1.mha using B-spline registration,
create a command file like this:
# command_file.txt
[GLOBAL]
fixed=image_1.mha
moving=image_2.mha
img_out=warped_2.mha
xform_out=bspline_coefficients.txt
[STAGE]
xform=bspline
impl=plastimatch
threading=openmp
max_its=30
regularization_lambda=0.005
grid_spac=100 100 100
res=4 4 2
Then, run the registration like this:
plastimatch register command_file.txt
The above example only performs a single registration stage. If you want to do
multi-stage registration, use multiple [STAGE] sections. Like this:
# command_file.txt
[GLOBAL]
fixed=image_1.mha
moving=image_2.mha
img_out=warped_2.mha
xform_out=bspline_coefficients.txt
[STAGE]
xform=bspline
impl=plastimatch
threading=openmp
max_its=30
regularization_lambda=0.005
grid_spac=100 100 100
res=4 4 2
[STAGE]
max_its=30
grid_spac=80 80 80
res=2 2 1
[STAGE]
max_its=30
grid_spac=60 60 60
res=1 1 1
For more examples, please refer to the image_registration_guidebook.
PLASTIMATCH RESAMPLE
The resample command can be used to change the geometry of an image.
The command line usage is given as follows:
Usage: plastimatch resample [options]
Options:
--default-value <arg> value to set for pixels with unknown value,
default is 0
--dim <arg> size of output image in voxels "x [y z]"
--direction-cosines <arg>
oriention of x, y, and z axes; Specify either
preset value,
{identity,rotated-{1,2,3},sheared}, or 9 digit
matrix string "a b c d e f g h i"
-F, --fixed <arg> fixed image (match output size to this image)
-h, --help display this help message
--input <arg> input directory or filename; can be an image or
vector field
--interpolation <arg> interpolation type, either "nn" or "linear",
default is linear
--origin <arg> location of first image voxel in mm "x y z"
--output <arg> output image or vector field
--output-type <arg> type of output image, one of {uchar, short,
float, ...}
--spacing <arg> voxel spacing in mm "x [y z]"
--subsample <arg> bin voxels together at integer subsampling rate
"x [y z]"
--version display the program version
Example
We can use the --subsample option to bin an integer number of voxels to a single voxel.
So for example, if we want to bin a cube of size 3x3x1 voxels to a single voxel, we would
do the following.
plastimatch resample \
--input infile.nrrd \
--output outfile.nrrd \
--subsample "3 3 1"
PLASTIMATCH SCALE
The scale command scales an image or vector field by multiplying each voxel by a constant
value.
The command line usage is given as follows:
Usage: plastimatch scale [options] input_file
Options:
--output <arg> filename for output image or vector field
--weight <arg> scale the input image or vector field by this
value (float)
Example
This command creates an output file with image intensity (or voxel length) twice as large
as the input values:
plastimatch scale --output output.mha --weight 2.0 input.mha
PLASTIMATCH SEGMENT
The segment command does simple threshold-based semgentation. The command line usage is
given as follows:
Usage: plastimatch segment [options]
Options:
-h, --help Display this help message
--input <arg> Input image filename (required)
--lower-threshold <arg> Lower threshold (include voxels
above this value)
--output-dicom <arg> Output dicom directory (for RTSTRUCT)
--output-img <arg> Output image filename
--upper-threshold <arg> Upper threshold (include voxels
below this value)
Example
Suppose we have a CT image of a water tank, and we wish to create an image which has ones
where there is water, and zeros where there is air. Then we could do this:
plastimatch segment \
--input water.mha \
--output-img water-label.mha \
--lower-threshold -500
If we wanted instead to create a DICOM-RT structure set, we should specify a DICOM image
as the input. This will allow plastimatch to create the DICOM-RT with the correct patient
name, patient id, and UIDs. The output file will be called "ss.dcm".
plastimatch segment \
--input water_dicom \
--output-dicom water_dicom \
--lower-threshold -500
PLASTIMATCH STATS
The plastimatch stats command displays a few basic statistics about the image onto the
screen.
The command line usage is given as follows:
Usage: plastimatch stats file [file ...]
The input files can be either 2D projection images, 3D volumes, or 3D vector fields.
Example
The following command displays statistics for the 3D volume synth_1.mha.
$ plastimatch stats synth_1.mha
MIN -999.915161 AVE -878.686035 MAX 0.000000 NUM 54872
The reported statistics are interpreted as follows:
MIN Minimum intensity in image
AVE Average intensity in image
MAX Maximum intensity in image
NUM Number of voxels in image
Example
The following command displays statistics for the 3D vector field vf.mha:
$ plastimatch stats vf.mha
Min: 0.000 -0.119 -0.119
Mean: 13.200 0.593 0.593
Max: 21.250 1.488 1.488
Mean abs: 13.200 0.594 0.594
Energy: MINDIL -6.79 MAXDIL 0.166 MAXSTRAIN 41.576 TOTSTRAIN 70849
Min dilation at: (29 19 19)
Jacobian: MINJAC -6.32835 MAXJAC 1.15443 MINABSJAC 0.360538
Min abs jacobian at: (28 36 36)
Second derivatives: MINSECDER 0 MAXSECDER 388.82 TOTSECDER 669219
INTSECDER 1.524e+06
Max second derivative: (29 36 36)
The rows corresponding to "Min, Mean, Max, and Mean abs" each have three numbers, which
correspond to the x, y, and z coordinates. Therefore, they compute these statistics for
each vector direction separately.
The remaining statistics are described as follows:
MINDIL Minimum dilation
MAXDIL Maximum dilation
MAXSTRAIN Maximum strain
TOTSTRAIN Total strain
MINJAC Minimum Jacobian
MAXJAC Maximum Jacobian
MINABSJAC Minimum absolute Jacobian
MINSECDER Minimum second derivative
MAXSECDER Maximum second derivative
TOTSECDER Total second derivative
INTSECDER Integral second derivative
PLASTIMATCH SYNTH
The synth command creates a synthetic image. The following kinds of images can be
created, by specifying the appropriate --pattern option. Each of these patterns come with
a synthetic structure set and synthetic dose which can be used for testing.
• donut -- a donut shaped structure
• gauss -- a Gaussian blur
• grid -- a 3D grid
• lung -- a synthetic lung with a tumor
• rect -- a uniform rectangle within a uniform background
• sphere -- a uniform sphere within a uniform background
• xramp -- an image that linearly varies intensities in the x direction
• yramp -- an image that linearly varies intensities in the y direction
• zramp -- an image that linearly varies intensities in the z direction
The command line usage is given as follows:
Usage: plastimatch synth [options]
Options:
--background <arg> intensity of background region
--cylinder-center <arg> location of cylinder center in mm "x [y
z]"
--cylinder-radius <arg> size of cylinder in mm "x [y z]"
--dicom-with-uids <arg> set to false to remove uids from created
dicom filenames, default is true
--dim <arg> size of output image in voxels "x [y z]"
--direction-cosines <arg>
oriention of x, y, and z axes; Specify
either preset value,
{identity,rotated-{1,2,3},sheared}, or 9
digit matrix string "a b c d e f g h i"
--donut-center <arg> location of donut center in mm "x [y z]"
--donut-radius <arg> size of donut in mm "x [y z]"
--donut-rings <arg> number of donut rings (2 rings for
traditional donut)
--dose-center <arg> location of dose center in mm "x y z"
--dose-size <arg> dimensions of dose aperture in mm "x [y
z]", or locations of rectangle corners
in mm "x1 x2 y1 y2 z1 z2"
--fixed <arg> fixed image (match output size to this
image)
--foreground <arg> intensity of foreground region
--gabor-k-fib <arg> choose gabor direction at index i within
fibonacci spiral of length n; specified
as "i n" where i and n are integers, and
i is between 0 and n-1
--gauss-center <arg> location of Gaussian center in mm "x [y
z]"
--gauss-std <arg> width of Gaussian in mm "x [y z]"
--grid-pattern <arg> grid pattern spacing in voxels "x [y z]"
--input <arg> input image (add synthetic pattern onto
existing image)
--lung-tumor-pos <arg> position of tumor in mm "z" or "x y z"
--metadata <arg> patient metadata (you may use this
option multiple times)
--noise-mean <arg> mean intensity of gaussian noise
--noise-std <arg> standard deviation of gaussian noise
--origin <arg> location of first image voxel in mm "x y
z"
--output <arg> output filename
--output-dicom <arg> output dicom directory
--output-dose-img <arg> filename for output dose image
--output-ss-img <arg> filename for output structure set image
--output-ss-list <arg> filename for output file containing
structure names
--output-type <arg> data type for output image: {uchar,
short, ushort, ulong, float}, default is
float
--patient-id <arg> patient id metadata: string
--patient-name <arg> patient name metadata: string
--patient-pos <arg> patient position metadata: one of
{hfs,hfp,ffs,ffp}
--pattern <arg> synthetic pattern to create: {cylinder,
donut, dose, gabor, gauss, grid, lung,
noise, rect, sphere, xramp, yramp,
zramp}, default is gauss
--penumbra <arg> width of dose penumbra in mm
--rect-size <arg> width of rectangle in mm "x [y z]", or
locations of rectangle corners in mm "x1
x2 y1 y2 z1 z2"
--spacing <arg> voxel spacing in mm "x [y z]"
--sphere-center <arg> location of sphere center in mm "x y z"
--sphere-radius <arg> radius of sphere in mm "x [y z]"
--volume-size <arg> size of output image in mm "x [y z]"
Examples
Create a cubic water phantom 30 x 30 x 40 cm with zero position at the center of the water
surface:
plastimatch synth \
--pattern rect \
--output water_tank.mha \
--rect-size "-150 150 0 400 -150 150" \
--origin "-245.5 245.5 -49.5 449.5 -149.5 149.5" \
--spacing "1 1 1" \
--dim "500 500 300"
Create lung phantoms with two different tumor positions, and output to dicom:
plastimatch synth \
--pattern lung \
--output-dicom lung_inhale \
--lung-tumor-pos "0 0 10"
plastimatch synth \
--pattern lung \
--output-dicom lung_exhale \
--lung-tumor-pos "0 0 -10"
PLASTIMATCH SYNTH-VF
The synth-vf command creates a synthetic vector field. The following kinds of vector
fields can be created, by specifying the appropriate option.
• gauss -- a gaussian warp
• radial -- a radial expansion or contraction
• translation -- a uniform translation
• zero -- a vector field that is zero everywhere
The command line usage is given as follows:
Usage: plastimatch synth-vf [options]
Options:
--dim <arg> size of output image in voxels "x [y z]"
--direction-cosines <arg>
oriention of x, y, and z axes; Specify
either preset value, {identity,
rotated-{1,2,3}, sheared}, or 9 digit
matrix string "a b c d e f g h i"
--fixed <arg> An input image used to set the size of the
output
--gauss-center <arg> location of center of gaussian warp "x [y
z]"
--gauss-mag <arg> displacment magnitude for gaussian warp in
mm "x [y z]"
--gauss-std <arg> width of gaussian std in mm "x [y z]"
--origin <arg> location of first image voxel in mm "x y
z"
--output <arg> output filename
--radial-center <arg> location of center of radial warp "x [y
z]"
--radial-mag <arg> displacement magnitude for radial warp in
mm "x [y z]"
--spacing <arg> voxel spacing in mm "x [y z]"
--volume-size <arg> size of output image in mm "x [y z]"
--xf-gauss gaussian warp
--xf-radial radial expansion (or contraction)
--xf-trans <arg> uniform translation in mm "x y z"
--xf-zero Null transform
PLASTIMATCH THRESHOLD
The threshold command creates a binary labelmap image from an input intensity image.
The command line usage is given as follows:
Usage: plastimatch threshold [options] Options:
--above <arg>
value above which output has value high
--below <arg>
value below which output has value high
-h, --help
display this help message --input <arg> input directory or filename --output
<arg> output image --range <arg> a string that forms a list of threshold
ranges of the
form "r1-lo,r1-hi,r2-lo,r2-hi,...", such that voxels with intensities within
any of the ranges ([r1-lo,r1-hi], [r2-lo,r2-hi], ...) have output value high
--version
display the program version
Example
The following command creates a binary label image with value 1 when input intensities are
between 100 and 200, and value 0 otherwise.:
plastimatch threshold \
--input input_image.nrrd \
--output output_labe.nrrd \
--range "100,200"
PLASTIMATCH THUMBNAIL
The thumbnail command generates a two-dimensional thumbnail image of an axial slice of the
input volume. The output image is not required to correspond exactly to an integer slice
number. The location of the output image within the slice is always centered.
The command line usage is given as follows:
Usage: plastimatch thumbnail [options] input-file
Options:
--input file
--output file
--thumbnail-dim size
--thumbnail-spacing size
--slice-loc location
Example
We create a two-dimensional image with resolution 10 x 10 pixels, at axial location 0, and
of size 20 x 20 mm:
plastimatch thumbnail \
--input in.mha --output out.mha \
--thumbnail-dim 10 \
--thumbnail-spacing 2 \
--slice-loc 0
PLASTIMATCH UNION
The union command creates a binary volume which is the logical union of two input images.
Voxels in the output image have value one if the voxel is non-zero in either input image,
or value zero if the voxel is zero in both input images.
The command line usage is given as follows:
Usage: plastimatch union [options] input_1 input_2
Options:
-h, --help display this help message
--output <arg> filename for output image
--version display the program version
Example
The following command creates a volume that is the union of two input images:
plastimatch union \
--output itv.mha \
phase_1.mha phase_2.mha
PLASTIMATCH WARP
The warp command is an alias for convert. Please refer to plastimatch convert for the
list of command line parameters.
Examples
To warp an image using the B-spline coefficients generated by the plastimatch register
command (saved in the file bspline.txt), do the following:
plastimatch warp \
--input infile.nrrd \
--output outfile.nrrd \
--xf bspline.txt
In the previous example, the output file geometry was determined by the geometry
information in the bspline coefficient file. You can resample to a different geometry
using --fixed, or --origin, --dim, and --spacing.
plastimatch warp \
--input infile.nrrd \
--output outfile.nrrd \
--xf bspline.txt \
--fixed reference.nrrd
When warping a structure set image, where the integer bits correspond to structure
membership, you need to use nearest neighbor interpolation rather than linear
interpolation.
plastimatch warp \
--input structures-in.nrrd \
--output structures-out.nrrd \
--xf bspline.txt \
--interpolation nn
Sometimes, voxels located outside of the geometry of the input image will be warped into
the geometry of the output image. By default, these areas are "filled in" with an
intensity of zero. You can choose a different value for these areas using the
--default-value option.
plastimatch warp \
--input infile.nrrd \
--output outfile.nrrd \
--xf bspline.txt \
--default-value -1000
In addition to images and structures, landmarks exported from 3D Slicer can also be
warped.
plastimatch warp \
--input fixed_landmarks.fcsv \
--output-pointset warped_landmarks.fcsv \
--xf bspline.txt
Sometimes, it may be desirable to apply a transform explicitly defined by a vector field
instead of using B-spline coefficients. To allow this, the --xf option also accepts
vector field volumes. For example, the previous example would become.
plastimatch warp \
--input fixed_landmarks.fcsv \
--output-pointset warped_landmarks.fcsv \
--xf vf.mha
PLASTIMATCH XF-CONVERT
The xf-convert command converts between transform types. A transform can be either a
B-spline transform, or a vector field. There are two different kinds of B-spline
transform formats: the plastimatch native format, and the ITK format. In addition to
converting the transform type, the xf-convert command can also change the grid-spacing of
B-spline transforms.
The command line usage is given as follows:
Usage: plastimatch xf-convert [options]
Options:
--dim <arg> Size of output image in voxels "x [y z]"
--grid-spacing <arg> B-spline grid spacing in mm "x [y z]"
--input <arg> Input xform filename (required)
--nobulk Omit bulk transform for itk_bspline
--origin <arg> Location of first image voxel in mm "x y z"
--output <arg> Output xform filename (required)
--output-type <arg> Type of xform to create (required), choose
from {bspline, itk_bspline, vf}
--spacing <arg> Voxel spacing in mm "x [y z]"
Example
We want to convert a B-spline transform into a vector field. If the B-spline transform is
in native-format, the vector field geometry is defined by the values found in the
transform header.:
plastimatch xf-convert \
--input bspline.txt \
--output vf.mha \
--output-type vf
Likewise, if we want to convert a vector field into a set of B-spline coefficients with a
control-point spacing of 30 mm in each direction.
plastimatch xf-convert \
--input vf.mha \
--output bspline.txt \
--output-type bspline \
--grid-spacing 30
AUTHOR
Plastimatch is a collaborative project. For additional documentation, please visit
http://plastimatch.org. For questions, comments, and bug reports, please visit
http://groups.google.com/group/plastimatch.
COPYRIGHT
Plastimatch development team (C) 2010-2015. You are free to use, modify, and distribute
plastimatch according to a BSD-style license. Please see LICENSE.TXT for details.