Provided by: openafs-client_1.8.0~pre5-1ubuntu1.2_amd64 bug

NAME

       vos_addsite - Adds a read-only site definition to a volume's VLDB entry

SYNOPSIS

       vos addsite -server <machine name for new site>
           -partition <partition name for new site>
           -id <volume name or ID>
           [-roid <readonly volume name or ID>]
           [-valid] [-cell <cell name>]
           [-noauth] [-localauth]
           [-verbose] [-encrypt] [-noresolve]
           [-config <config directory>]
           [-help]

       vos ad -s <machine name for new site>
           -p <partition name for new site>
           -i <volume name or ID>
           [-r <readonly volume name or ID>]
           [-va] [-c <cell name>] >>> [-noa] [-l]
           [-ve] [-e] [-nor]
           [-co <config directory>]
           [-h]

DESCRIPTION

       The vos addsite command defines a new read-only site (partition on a file server machine,
       specified by the -server and -partition arguments) in the Volume Location Database (VLDB)
       entry of the read/write volume named by the -id argument. When the vos release command is
       next issued against the read/write volume, a read-only copy of it is distributed to all of
       the read-only sites, including the newly defined one.

CAUTIONS

       A volume's VLDB entry accommodates a maximum number of 16 site definitions. The site
       housing the read/write and backup versions of the volume counts as one site, the backup
       snapshot counts as one site, and one site should be reserved for a transient clone for
       volume moves and similar operations. Each read-only site counts as an additional site
       (even the read-only site defined on the same file server machine and partition as the
       read/write site counts as a separate site). The limit in the VLDB entry effectively
       determines the maximum number of copies of the volume that are available to AFS clients.

       Attempts to create additional sites by using this command fail with an error.

OPTIONS

       -server <machine name>
           Identifies the file server machine where the read-only volume is to reside. Provide
           the machine's IP address or its host name (either fully qualified or using an
           unambiguous abbreviation). For details, see vos(1).

       -partition <partition name>
           Identifies the partition where the read-only volume is to reside, on the file server
           machine named by the -server argument. Provide the partition's complete name with
           preceding slash (for example, "/vicepa") or use one of the three acceptable
           abbreviated forms. For details, see vos(1).

       -id <volume name or ID>
           Specifies either the complete name or volume ID number of the read/write source
           volume.

       -roid <readonly volume name or ID>
           Specifies either the complete name or volume ID number of the readonly volume. This
           will only be honored if the source read/write volume does not already have a readonly
           volume ID associated with it. If the source read/write volume already has a readonly
           volume ID, the specified ID will be ignored, and a warning will be printed.

           If this is not specified and the source read/write volume does not already have a
           readonly volume ID, a volume ID for the readonly volume will be allocated for it when
           the vos release command is run.

           The automatically allocated readonly volume IDs should be fine for almost all cases,
           so you should almost never need to specify them explicitly.  This option is available
           in OpenAFS versions 1.5.61 or later.

       -valid
           Marks the site as up-to-date in the VLDB. You should only do this if the new site
           already has a current readonly replica of the volume, but for some reason it is not in
           the VLDB as a replica site. This is useful when an existing read-only volume is dumped
           and restored with the -readonly flag at the new site. This option is available in
           OpenAFS clients 1.4.7 or later and 1.5.31 or later. This option can be used with
           OpenAFS server versions later than 1.4.1 or 1.5.0.

       -cell <cell name>
           Names the cell in which to run the command. Do not combine this argument with the
           -localauth flag. For more details, see vos(1).

       -noauth
           Assigns the unprivileged identity "anonymous" to the issuer. Do not combine this flag
           with the -localauth flag. For more details, see vos(1).

       -localauth
           Constructs a server ticket using a key from the local /etc/openafs/server/KeyFile
           file. The vos command interpreter presents it to the Volume Server and Volume Location
           Server during mutual authentication. Do not combine this flag with the -cell argument
           or -noauth flag. For more details, see vos(1).

       -verbose
           Produces on the standard output stream a detailed trace of the command's execution. If
           this argument is omitted, only warnings and error messages appear.

       -encrypt
           Encrypts the command so that the operation's results are not transmitted across the
           network in clear text. This option is available in OpenAFS versions 1.4.11 or later
           and 1.5.60 or later.

       -noresolve
           Shows all servers as IP addresses instead of the DNS name. This is very useful when
           the server address is registered as 127.0.0.1 or when dealing with multi-homed
           servers. This option is available in OpenAFS versions 1.4.8 or later and 1.5.35 or
           later.

       -config <configuration directory>
           Set the location of the configuration directory to be used. This defaults to
           /etc/openafs, except if -localauth is specified, in which case the default is
           /etc/openafs/server. This option allows the use of alternative configuration locations
           for testing purposes.

       -help
           Prints the online help for this command. All other valid options are ignored.

EXAMPLES

       The following example, appropriate in the Example Organization cell, defines a read-only
       site for the cell's "root.afs" volume.

          % vos addsite -server sv7.example.org -partition /vicepb -id root.afs

PRIVILEGE REQUIRED

       The issuer must be listed in the /etc/openafs/server/UserList file on the machine
       specified with the -server argument and on each database server machine. If the -localauth
       flag is included, the issuer must instead be logged on to a server machine as the local
       superuser "root".

SEE ALSO

       vos(1), vos_examine(1), vos_release(1)

COPYRIGHT

       IBM Corporation 2000. <http://www.ibm.com/> All Rights Reserved.

       This documentation is covered by the IBM Public License Version 1.0.  It was converted
       from HTML to POD by software written by Chas Williams and Russ Allbery, based on work by
       Alf Wachsmann and Elizabeth Cassell.