Provided by: libmojolicious-perl_7.59+dfsg-1ubuntu1_all bug

NAME

       Mojo::Server::Hypnotoad - A production web serv...ALL GLORY TO THE HYPNOTOAD!

SYNOPSIS

         use Mojo::Server::Hypnotoad;

         my $hypnotoad = Mojo::Server::Hypnotoad->new;
         $hypnotoad->run('/home/sri/myapp.pl');

DESCRIPTION

       Mojo::Server::Hypnotoad is a full featured, UNIX optimized, pre-forking non-blocking I/O
       HTTP and WebSocket server, built around the very well tested and reliable
       Mojo::Server::Prefork, with IPv6, TLS, SNI, UNIX domain socket, Comet (long polling),
       keep-alive, multiple event loop and hot deployment support that just works. Note that the
       server uses signals for process management, so you should avoid modifying signal handlers
       in your applications.

       To start applications with it you can use the hypnotoad script, which listens on port
       8080, automatically daemonizes the server process and defaults to "production" mode for
       Mojolicious and Mojolicious::Lite applications.

         $ hypnotoad ./myapp.pl

       You can run the same command again for automatic hot deployment.

         $ hypnotoad ./myapp.pl
         Starting hot deployment for Hypnotoad server 31841.

       This second invocation will load the application again, detect the process id file with
       it, and send a "USR2" signal to the already running server.

       For better scalability (epoll, kqueue) and to provide non-blocking name resolution, SOCKS5
       as well as TLS support, the optional modules EV (4.0+), Net::DNS::Native (0.15+),
       IO::Socket::Socks (0.64+) and IO::Socket::SSL (1.94+) will be used automatically if
       possible. Individual features can also be disabled with the "MOJO_NO_NNR", "MOJO_NO_SOCKS"
       and "MOJO_NO_TLS" environment variables.

       See "DEPLOYMENT" in Mojolicious::Guides::Cookbook for more.

MANAGER SIGNALS

       The Mojo::Server::Hypnotoad manager process can be controlled at runtime with the
       following signals.

   INT, TERM
       Shut down server immediately.

   QUIT
       Shut down server gracefully.

   TTIN
       Increase worker pool by one.

   TTOU
       Decrease worker pool by one.

   USR2
       Attempt zero downtime software upgrade (hot deployment) without losing any incoming
       connections.

         Manager (old)
         |- Worker [1]
         |- Worker [2]
         |- Worker [3]
         |- Worker [4]
         +- Manager (new)
            |- Worker [1]
            |- Worker [2]
            |- Worker [3]
            +- Worker [4]

       The new manager will automatically send a "QUIT" signal to the old manager and take over
       serving requests after starting up successfully.

WORKER SIGNALS

       Mojo::Server::Hypnotoad worker processes can be controlled at runtime with the following
       signals.

   QUIT
       Stop worker gracefully.

SETTINGS

       Mojo::Server::Hypnotoad can be configured with the following settings, see "Hypnotoad" in
       Mojolicious::Guides::Cookbook for examples.

   accepts
         accepts => 100

       Maximum number of connections a worker is allowed to accept, before stopping gracefully
       and then getting replaced with a newly started worker, defaults to the value of "accepts"
       in Mojo::Server::Prefork. Setting the value to 0 will allow workers to accept new
       connections indefinitely. Note that up to half of this value can be subtracted randomly to
       improve load balancing, and to make sure that not all workers restart at the same time.

   backlog
         backlog => 128

       Listen backlog size, defaults to the value of "backlog" in Mojo::Server::Daemon.

   clients
         clients => 100

       Maximum number of accepted connections each worker process is allowed to handle
       concurrently, before stopping to accept new incoming connections, defaults to the value of
       "max_connections" in Mojo::IOLoop. Note that high concurrency works best with applications
       that perform mostly non-blocking operations, to optimize for blocking operations you can
       decrease this value and increase "workers" instead for better performance.

   graceful_timeout
         graceful_timeout => 15

       Maximum amount of time in seconds stopping a worker gracefully may take before being
       forced, defaults to the value of "graceful_timeout" in Mojo::Server::Prefork. Note that
       this value should usually be a little larger than the maximum amount of time you expect
       any one request to take.

   heartbeat_interval
         heartbeat_interval => 3

       Heartbeat interval in seconds, defaults to the value of "heartbeat_interval" in
       Mojo::Server::Prefork.

   heartbeat_timeout
         heartbeat_timeout => 2

       Maximum amount of time in seconds before a worker without a heartbeat will be stopped
       gracefully, defaults to the value of "heartbeat_timeout" in Mojo::Server::Prefork. Note
       that this value should usually be a little larger than the maximum amount of time you
       expect any one operation to block the event loop.

   inactivity_timeout
         inactivity_timeout => 10

       Maximum amount of time in seconds a connection can be inactive before getting closed,
       defaults to the value of "inactivity_timeout" in Mojo::Server::Daemon.  Setting the value
       to 0 will allow connections to be inactive indefinitely.

   listen
         listen => ['http://*:80']

       Array reference with one or more locations to listen on, defaults to "http://*:8080". See
       also "listen" in Mojo::Server::Daemon for more examples.

   pid_file
         pid_file => '/var/run/hypnotoad.pid'

       Full path to process id file, defaults to "hypnotoad.pid" in the same directory as the
       application. Note that this value can only be changed after the server has been stopped.

   proxy
         proxy => 1

       Activate reverse proxy support, which allows for the "X-Forwarded-For" and
       "X-Forwarded-Proto" headers to be picked up automatically, defaults to the value of
       "reverse_proxy" in Mojo::Server.

   requests
         requests => 50

       Number of keep-alive requests per connection, defaults to the value of "max_requests" in
       Mojo::Server::Daemon.

   spare
         spare => 4

       Temporarily spawn up to this number of additional workers if there is a need, defaults to
       the value of "spare" in Mojo::Server::Prefork. This allows for new workers to be started
       while old ones are still shutting down gracefully, drastically reducing the performance
       cost of worker restarts.

   upgrade_timeout
         upgrade_timeout => 45

       Maximum amount of time in seconds a zero downtime software upgrade may take before getting
       canceled, defaults to 60.

   workers
         workers => 10

       Number of worker processes, defaults to the value of "workers" in Mojo::Server::Prefork. A
       good rule of thumb is two worker processes per CPU core for applications that perform
       mostly non-blocking operations, blocking operations often require more and benefit from
       decreasing concurrency with "clients" (often as low as 1). Note that during zero downtime
       software upgrades there will be twice as many workers active for a short amount of time.

ATTRIBUTES

       Mojo::Server::Hypnotoad implements the following attributes.

   prefork
         my $prefork = $hypnotoad->prefork;
         $hypnotoad  = $hypnotoad->prefork(Mojo::Server::Prefork->new);

       Mojo::Server::Prefork object this server manages.

   upgrade_timeout
         my $timeout = $hypnotoad->upgrade_timeout;
         $hypnotoad  = $hypnotoad->upgrade_timeout(15);

       Maximum amount of time in seconds a zero downtime software upgrade may take before getting
       canceled, defaults to 60.

METHODS

       Mojo::Server::Hypnotoad inherits all methods from Mojo::Base and implements the following
       new ones.

   configure
         $hypnotoad->configure('hypnotoad');

       Configure server from application settings.

   run
         $hypnotoad->run('script/my_app');

       Run server for application and wait for "MANAGER SIGNALS".

SEE ALSO

       Mojolicious, Mojolicious::Guides, <http://mojolicious.org>.