Provided by: wireshark-common_2.6.10-1~ubuntu18.04.0_amd64 bug

NAME

       wireshark-filter - Wireshark filter syntax and reference

SYNOPSIS

       wireshark [other options] [ -R "filter expression" ]

       tshark [other options] [ -R "filter expression" ]

DESCRIPTION

       Wireshark and TShark share a powerful filter engine that helps remove the noise from a
       packet trace and lets you see only the packets that interest you.  If a packet meets the
       requirements expressed in your filter, then it is displayed in the list of packets.
       Display filters let you compare the fields within a protocol against a specific value,
       compare fields against fields, and check the existence of specified fields or protocols.

       Filters are also used by other features such as statistics generation and packet list
       colorization (the latter is only available to Wireshark). This manual page describes their
       syntax. A comprehensive reference of filter fields can be found within Wireshark and in
       the display filter reference at <https://www.wireshark.org/docs/dfref/>.

FILTER SYNTAX

   Check whether a field or protocol exists
       The simplest filter allows you to check for the existence of a protocol or field.  If you
       want to see all packets which contain the IP protocol, the filter would be "ip" (without
       the quotation marks). To see all packets that contain a Token-Ring RIF field, use
       "tr.rif".

       Think of a protocol or field in a filter as implicitly having the "exists" operator.

   Comparison operators
       Fields can also be compared against values.  The comparison operators can be expressed
       either through English-like abbreviations or through C-like symbols:

           eq, ==    Equal
           ne, !=    Not Equal
           gt, >     Greater Than
           lt, <     Less Than
           ge, >=    Greater than or Equal to
           le, <=    Less than or Equal to

   Search and match operators
       Additional operators exist expressed only in English, not C-like syntax:

           contains     Does the protocol, field or slice contain a value
           matches, ~   Does the protocol or text string match the given
                        case-insensitive Perl-compatible regular expression

       The "contains" operator allows a filter to search for a sequence of characters, expressed
       as a string (quoted or unquoted), or bytes, expressed as a byte array, or for a single
       character, expressed as a C-style character constant.  For example, to search for a given
       HTTP URL in a capture, the following filter can be used:

           http contains "https://www.wireshark.org"

       The "contains" operator cannot be used on atomic fields, such as numbers or IP addresses.

       The "matches"  or "~" operator allows a filter to apply to a specified Perl-compatible
       regular expression (PCRE).  The "matches" operator is only implemented for protocols and
       for protocol fields with a text string representation. Matches are case-insensitive by
       default.  For example, to search for a given WAP WSP User-Agent, you can write:

           wsp.user_agent matches "cldc"

       This would match "cldc", "CLDC", "cLdC" or any other combination of upper and lower case
       letters.

       You can force case sensitivity using

           wsp.user_agent matches "(?-i)cldc"

       This is an example of PCRE's (?option) construct. (?-i) performs a case-sensitive pattern
       match but other options can be specified as well. More information can be found in the
       pcrepattern(3) man page at <http://perldoc.perl.org/perlre.html>).

   Functions
       The filter language has the following functions:

           upper(string-field) - converts a string field to uppercase
           lower(string-field) - converts a string field to lowercase

       upper() and lower() are useful for performing case-insensitive string comparisons. For
       example:

           upper(ncp.nds_stream_name) contains "MACRO"
           lower(mount.dump.hostname) == "angel"

   Protocol field types
       Each protocol field is typed. The types are:

           ASN.1 object identifier
           Boolean
           Character string
           Compiled Perl-Compatible Regular Expression (GRegex) object
           Date and time
           Ethernet or other MAC address
           EUI64 address
           Floating point (double-precision)
           Floating point (single-precision)
           Frame number
           Globally Unique Identifier
           IPv4 address
           IPv6 address
           IPX network number
           Label
           Protocol
           Sequence of bytes
           Signed integer, 1, 2, 3, 4, or 8 bytes
           Time offset
           Unsigned integer, 1, 2, 3, 4, or 8 bytes
           1-byte ASCII character

       An integer may be expressed in decimal, octal, or hexadecimal notation, or as a C-style
       character constant.  The following six display filters are equivalent:

           frame.pkt_len > 10
           frame.pkt_len > 012
           frame.pkt_len > 0xa
           frame.pkt_len > '\n'
           frame.pkt_len > '\xa'
           frame.pkt_len > '\012'

       Boolean values are either true or false.  In a display filter expression testing the value
       of a Boolean field, "true" is expressed as 1 or any other non-zero value, and "false" is
       expressed as zero.  For example, a token-ring packet's source route field is Boolean.  To
       find any source-routed packets, a display filter would be:

           tr.sr == 1

       Non source-routed packets can be found with:

           tr.sr == 0

       Ethernet addresses and byte arrays are represented by hex digits.  The hex digits may be
       separated by colons, periods, or hyphens:

           eth.dst eq ff:ff:ff:ff:ff:ff
           aim.data == 0.1.0.d
           fddi.src == aa-aa-aa-aa-aa-aa
           echo.data == 7a

       IPv4 addresses can be represented in either dotted decimal notation or by using the
       hostname:

           ip.dst eq www.mit.edu
           ip.src == 192.168.1.1

       IPv4 addresses can be compared with the same logical relations as numbers: eq, ne, gt, ge,
       lt, and le.  The IPv4 address is stored in host order, so you do not have to worry about
       the endianness of an IPv4 address when using it in a display filter.

       Classless InterDomain Routing (CIDR) notation can be used to test if an IPv4 address is in
       a certain subnet.  For example, this display filter will find all packets in the 129.111
       Class-B network:

           ip.addr == 129.111.0.0/16

       Remember, the number after the slash represents the number of bits used to represent the
       network.  CIDR notation can also be used with hostnames, as in this example of finding IP
       addresses on the same Class C network as 'sneezy':

           ip.addr eq sneezy/24

       The CIDR notation can only be used on IP addresses or hostnames, not in variable names.
       So, a display filter like "ip.src/24 == ip.dst/24" is not valid (yet).

       IPX networks are represented by unsigned 32-bit integers.  Most likely you will be using
       hexadecimal when testing IPX network values:

           ipx.src.net == 0xc0a82c00

       Strings are enclosed in double quotes:

           http.request.method == "POST"

       Inside double quotes, you may use a backslash to embed a double quote or an arbitrary byte
       represented in either octal or hexadecimal.

           browser.comment == "An embedded \" double-quote"

       Use of hexadecimal to look for "HEAD":

           http.request.method == "\x48EAD"

       Use of octal to look for "HEAD":

           http.request.method == "\110EAD"

       This means that you must escape backslashes with backslashes inside double quotes.

           smb.path contains "\\\\SERVER\\SHARE"

       looks for \\SERVER\SHARE in "smb.path".

   The slice operator
       You can take a slice of a field if the field is a text string or a byte array.  For
       example, you can filter on the vendor portion of an ethernet address (the first three
       bytes) like this:

           eth.src[0:3] == 00:00:83

       Another example is:

           http.content_type[0:4] == "text"

       You can use the slice operator on a protocol name, too.  The "frame" protocol can be
       useful, encompassing all the data captured by Wireshark or TShark.

           token[0:5] ne 0.0.0.1.1
           llc[0] eq aa
           frame[100-199] contains "wireshark"

       The following syntax governs slices:

           [i:j]    i = start_offset, j = length
           [i-j]    i = start_offset, j = end_offset, inclusive.
           [i]      i = start_offset, length = 1
           [:j]     start_offset = 0, length = j
           [i:]     start_offset = i, end_offset = end_of_field

       Offsets can be negative, in which case they indicate the offset from the end of the field.
       The last byte of the field is at offset -1, the last but one byte is at offset -2, and so
       on.  Here's how to check the last four bytes of a frame:

           frame[-4:4] == 0.1.2.3

       or

           frame[-4:] == 0.1.2.3

       A slice is always compared against either a string or a byte sequence.  As a special case,
       when the slice is only 1 byte wide, you can compare it against a hex integer that 0xff or
       less (which means it fits inside one byte). This is not allowed for byte sequences greater
       than one byte, because then one would need to specify the endianness of the multi-byte
       integer. Also, this is not allowed for decimal numbers, since they would be confused with
       hex numbers that are already allowed as byte strings. Neverthelss, single-byte hex
       integers can be convienent:

           frame[4] == 0xff

       Slices can be combined. You can concatenate them using the comma operator:

           ftp[1,3-5,9:] == 01:03:04:05:09:0a:0b

       This concatenates offset 1, offsets 3-5, and offset 9 to the end of the ftp data.

   The membership operator
       A field may be checked for matches against a set of values simply with the membership
       operator. For instance, you may find traffic on common HTTP/HTTPS ports with the following
       filter:

           tcp.port in {80 443 8080}

       as opposed to the more verbose:

           tcp.port == 80 or tcp.port == 443 or tcp.port == 8080

       To find HTTP requests using the HEAD or GET methods:

           http.request.method in {"HEAD" "GET"}

       The set of values can also contain ranges:

           tcp.port in {443 4430..4434}
           ip.addr in {10.0.0.5 .. 10.0.0.9 192.168.1.1..192.168.1.9}
           frame.time_delta in {10 .. 10.5}

   Type conversions
       If a field is a text string or a byte array, it can be expressed in whichever way is most
       convenient.

       So, for instance, the following filters are equivalent:

           http.request.method == "GET"
           http.request.method == 47.45.54

       A range can also be expressed in either way:

           frame[60:2] gt 50.51
           frame[60:2] gt "PQ"

   Bit field operations
       It is also possible to define tests with bit field operations. Currently the following bit
       field operation is supported:

           bitwise_and, &      Bitwise AND

       The bitwise AND operation allows testing to see if one or more bits are set.  Bitwise AND
       operates on integer protocol fields and slices.

       When testing for TCP SYN packets, you can write:

           tcp.flags & 0x02

       That expression will match all packets that contain a "tcp.flags" field with the 0x02 bit,
       i.e. the SYN bit, set.

       Similarly, filtering for all WSP GET and extended GET methods is achieved with:

           wsp.pdu_type & 0x40

       When using slices, the bit mask must be specified as a byte string, and it must have the
       same number of bytes as the slice itself, as in:

           ip[42:2] & 40:ff

   Logical expressions
       Tests can be combined using logical expressions.  These too are expressible in C-like
       syntax or with English-like abbreviations:

           and, &&   Logical AND
           or,  ||   Logical OR
           not, !    Logical NOT

       Expressions can be grouped by parentheses as well.  The following are all valid display
       filter expressions:

           tcp.port == 80 and ip.src == 192.168.2.1
           not llc
           http and frame[100-199] contains "wireshark"
           (ipx.src.net == 0xbad && ipx.src.node == 0.0.0.0.0.1) || ip

       Remember that whenever a protocol or field name occurs in an expression, the "exists"
       operator is implicitly called. The "exists" operator has the highest priority. This means
       that the first filter expression must be read as "show me the packets for which tcp.port
       exists and equals 80, and ip.src exists and equals 192.168.2.1". The second filter
       expression means "show me the packets where not (llc exists)", or in other words "where
       llc does not exist" and hence will match all packets that do not contain the llc protocol.
       The third filter expression includes the constraint that offset 199 in the frame exists,
       in other words the length of the frame is at least 200.

       A special caveat must be given regarding fields that occur more than once per packet.
       "ip.addr" occurs twice per IP packet, once for the source address, and once for the
       destination address.  Likewise, "tr.rif.ring" fields can occur more than once per packet.
       The following two expressions are not equivalent:

               ip.addr ne 192.168.4.1
           not ip.addr eq 192.168.4.1

       The first filter says "show me packets where an ip.addr exists that does not equal
       192.168.4.1".  That is, as long as one ip.addr in the packet does not equal 192.168.4.1,
       the packet passes the display filter.  The other ip.addr could equal 192.168.4.1 and the
       packet would still be displayed.  The second filter says "don't show me any packets that
       have an ip.addr field equal to 192.168.4.1".  If one ip.addr is 192.168.4.1, the packet
       does not pass.  If neither ip.addr field is 192.168.4.1, then the packet is displayed.

       It is easy to think of the 'ne' and 'eq' operators as having an implicit "exists" modifier
       when dealing with multiply-recurring fields.  "ip.addr ne 192.168.4.1" can be thought of
       as "there exists an ip.addr that does not equal 192.168.4.1".  "not ip.addr eq
       192.168.4.1" can be thought of as "there does not exist an ip.addr equal to 192.168.4.1".

       Be careful with multiply-recurring fields; they can be confusing.

       Care must also be taken when using the display filter to remove noise from the packet
       trace. If, for example, you want to filter out all IP multicast packets to address
       224.1.2.3, then using:

           ip.dst ne 224.1.2.3

       may be too restrictive. Filtering with "ip.dst" selects only those IP packets that satisfy
       the rule. Any other packets, including all non-IP packets, will not be displayed. To
       display the non-IP packets as well, you can use one of the following two expressions:

           not ip or ip.dst ne 224.1.2.3
           not ip.addr eq 224.1.2.3

       The first filter uses "not ip" to include all non-IP packets and then lets "ip.dst ne
       224.1.2.3" filter out the unwanted IP packets. The second filter has already been
       explained above where filtering with multiply occurring fields was discussed.

FILTER FIELD REFERENCE

       The entire list of display filters is too large to list here. You can can find references
       and examples at the following locations:

       •   The online Display Filter Reference: <https://www.wireshark.org/docs/dfref/>

       •   Help:Supported Protocols in Wireshark

       •   "tshark -G fields" on the command line

       •   The Wireshark wiki: <https://wiki.wireshark.org/DisplayFilters>

NOTES

       The wireshark-filters manpage is part of the Wireshark distribution.  The latest version
       of Wireshark can be found at <https://www.wireshark.org>.

       Regular expressions in the "matches" operator are provided by GRegex in GLib.  See
       <http://developer.gnome.org/glib/2.32/glib-regex-syntax.html> or <http://www.pcre.org/>
       for more information.

       This manpage does not describe the capture filter syntax, which is different. See the
       manual page of pcap-filter(7) or, if that doesn't exist, tcpdump(8), or, if that doesn't
       exist, <https://wiki.wireshark.org/CaptureFilters> for a description of capture filters.

SEE ALSO

       wireshark(1), tshark(1), editcap(1), pcap(3), pcap-filter(7) or tcpdump(8) if it doesn't
       exist.

AUTHORS

       See the list of authors in the Wireshark man page for a list of authors of that code.