Provided by: libfuntools-dev_1.4.7-2_amd64 bug

NAME

       FunEnv - Funtools Environment Variables

SYNOPSIS

       Describes the environment variables which can be used to tailor the overall Funtools
       environment.

DESCRIPTION

       The following environment variables are supported by Funtools:

       •   FITS_EXTNAME

           The FITS_EXTNAME environment variable specifies the default FITS extension name when
           FunOpen() is called on a file lacking a primary image. Thus,

             setenv FITS_EXTNAME "NEWEV"

           will allow you to call FunOpen() on files without specifying NEWEV in the Funtools
           bracket specification.  If no FITS_EXTNAME variable is defined and the extension name
           also is not passed in the bracket specification, then the default will be to look for
           standard X-ray event table extension names "EVENTS" or "STDEVT" (we are, after all,
           and X-ray astronomy group at heart!).

       •   FITS_EXTNUM

           The FITS_EXTNUM environment variable specifies the default FITS extension number when
           FunOpen() is called on a file lacking a primary image. Thus,

             setenv FITS_EXTNUM 7

           will allow you to call FunOpen() on files to open the seventh extension without
           specifying the number in the Funtools bracket specification.

       •   FITS_BINCOLS and EVENTS_BINCOLS

           These environment variable specifies the default binning key for FITS binary tables
           and raw event files, respectively. They can be over-ridden using the
           bincols=[naxis1,naxis2] keyword in a Funtools bracket specification.  The value of
           each environment variable is a pair of comma-delimited columns, enclosed in
           parentheses, to use for binning.  For example, if you want to bin on detx and dety by
           default, then use:

             setenv FITS_BINCOLS "(detx,dety)"

           in preference to adding a bincols specification to each filename:

             foo.fits[bincols=(detx,dety)]

       •   FITS_BITPIX and EVENTS_BITPIX

           These environment variable specifies the default bitpix value for binning FITS binary
           tables and raw event files, respectively. They can be over-ridden using the
           bitpix=[value] keyword in a Funtools bracket specification.  The value of each
           environment variable is one of the standard FITS bitpix values (8,16,32,-32,-64).  For
           example, if you want binning routines to create a floating array, then use:

             setenv FITS_BITPIX -32

           in preference to adding a bitpix specification to each filename:

             foo.fits[bitpix=-32]

       •   ARRAY

           The ARRAY environment variable specifies the default definition of an array file for
           Funtools.  It is used if there is no array specification passed in the ARRAY()
           directive in a Non-FITS Array specification.  The value of the environment variable is
           a valid array specification such as:

             setenv ARRAY "s100.150"
             foo.arr[ARRAY()]

           This can be defined in preference to adding the specification to each filename:

             foo.arr[ARRAY(s100.150)]

       •   EVENTS

           The EVENTS environment variable specifies the default definition of an raw event file
           for Funtools.  It is used if there is no EVENTS specification passed in the EVENTS()
           directive in a Non-FITS EVENTS specification.  The value of the environment variable
           is a valid EVENTS specification such as:

             setenv EVENTS "x:J:1024,y:J:1024,pi:I,pha:I,time:D,dx:E:1024,dx:E:1024"
             foo.ev[EVENTS()]

           This can be defined in preference to adding the specification to each filename:

             foo.ev[EVENTS(x:J:1024,y:J:1024,pi:I,pha:I,time:D,dx:E:1024,dx:E:1024)]

       The following filter-related environment variables are supported by Funtools:

       •   FILTER_PTYPE

           The FILTER_PTYPE environment variable specifies how to build a filter.  There are
           three possible methods:

           •   process or p

               The filter is compiled and linked against the funtools library (which must
               therefore be accessible in the original install directory) to produce a slave
               program. This program is fed events or image data and returns filter results.

           •   dynamic or d (gcc only)

               The filter is compiled and linked against the funtools library (which must
               therefore be accessible in the original install directory) to produce a dynamic
               shared object, which is loaded into the funtools program and executed as a
               subroutine. (Extensive testing has shown that, contrary to expectations, this
               method is no faster than using a slave process.)

           •   contained or c

               The filter and all supporting region code is compiled and linked without reference
               to the funtools library to produce a slave program (which is fed events or image
               data and returns filter results). This method is slower than the other two,
               because of the time it takes to compile the region filtering code. It is used by
               stand-alone programs such as ds9, which do not have access to the funtools
               library.

           By default, dynamic is generally used for gcc compilers and process for other
           compilers. However the filter building algorithm will check for required external
           files and will use contained is these are missing.

       •   FUN_MAXROW

           The FUN_MAXROW environment variable is used by core row-processing Funtools programs
           (funtable, fundisp, funcnts, funhist, funmerge, and funcalc) to set the maximum number
           of rows read at once (i.e. it sets the third argument to the FunTableRowGet() call).
           The default is 8192. Note that this variable is a convention only: it will not be a
           part of a non-core Funtools program unless code is explicitly added, since each call
           to FunTableRowGet() specifies its own maximum number of rows to read. NB: if you make
           this value very large, you probably will need to increase FUN_MAXBUFSIZE (see below)
           as well.

       •   FUN_MAXBUFSIZE

           The FUN_MAXBUFSIZE environment variable is used to limit the max buffer size that will
           be allocated to hold table row data.  This buffer size is calculated to be the row
           size of the table multiplied by the maximum number of rows read at once (see above).
           Since the row size is unlimited (and we have examples of it being larger than 5 Mb),
           it is possible that the total buffer size will exceed the machine capabilities. We
           therefore set a default value of 5Mb for the max buffer size, and adjust maxrow so
           that the total size calculated is less than this max buffer size. (If the row size is
           greater than this max buffer size, then maxrow is set to 1.) This environment variable
           will change the max buffer size allowed.

       •   FILTER_CC

           The FILTER_CC environment variable specifies the compiler to use for compiling a
           filter specification. You also can use the CC environment variable. If neither has
           been set, then gcc will be used if available. Otherwise cc is used if available.

       •   FILTER_EXTRA

           The FILTER_EXTRA environment variable specifies extra options to add to a filter
           compile command line. In principle, you can add libraries, include files, and compiler
           switches. This variable should be used with care.

       •   FILTER_TMPDIR

           The FILTER_TMPDIR environment variable specifies the temporary directory for filter
           compilation intermediate files. You also can use the TMPDIR and TMP variables. By
           default, /tmp is used as the temporary directory.

       •   FILTER_KEEP

           The FILTER_KEEP environment variable specifies whether the intermediate filter files
           (i.e. C source file and compile log file) should be saved after a filter is built. The
           default is "false", so that these intermediate files are deleted. This variable is
           useful for debugging, but care should be taken to reset its value to false when
           debugging is complete.

SEE ALSO

       See funtools(7) for a list of Funtools help pages