Provided by: arpalert_2.0.12-1_amd64 bug

NAME

       arpalert - ARP traffic monitoring

DESCRIPTION

       Arpalert  uses  ARP  protocol  monitoring to prevent unauthorized connections on the local
       network.  If an illegal connection is detected, a program or  script  could  be  launched,
       which could be used to send an alert message, for example.

COMMAND LINE

       -f config_file
              Specify the config file.

       -i interface
              Comma separated network interfaces listen to.

       -p pid_file
              Use this pid file. this file containis a pid number of the arpalert session. If the
              file exist and his locked, the daemon do not run.

       -e exec_script
              Script launched when an alert is send.

       -D log_level
              The level logged. The levels are between 0 (emergency)  and  7  (debug).  If  3  is
              selected all levels bitween 0 and 3 are logged.

       -l leases_file
              This file contain a dump of the mac address in memory (see config file).

       -m module file
              Specify a module file to load

       -d     Run as daemon.

       -F     Run in foreground.

       -v     Watch  on  screen all the option selected (the options specified in config file and
              the default options)

       -h     The help command line.

       -w     Debug option: print a dump of packets captured.

       -P     Set the interface in promiscuous mode (don't set this if only the  arp  analyse  is
              used).

       -V     Print version and quit.

CONFIGURATION FILE

       The  config  file  contains 3 types of data: integer, string and boolean. The boolean type
       can take values 'oui', 'true', 'yes', '1' for the true values or 'non', 'no', 'false', '0'
       for the falses values.

       user = arpalert
              Use privileges separation with this user

       umask = 177
              Uses this umask for file creation.

       chroot dir = /home/thierry/arp_test/
              Use this directory for program jail
              If this option is commented out, the program does not use chroot.
              The program read the config file and open the syslog socket before the chroot:
              The kill -HUP does not work with chroot.
              If  the  syslog  program  is  restarted,  the socket change and the arpalert syslog
              system can't be connect to the new socket:  the  logs  with  syslog  are  disabled.
              Prefere to use the log file.
              The file pathes are relative to the chroot dir (except the config file)

       log file = /var/log/arpalert.log
              The program log into this file
              If this option is commented out, the internal system log is not used.
              The internal system logs can be used in same time that syslog.

       log level = 6
              The  level  logged.  The  levels  are  between 0 (emergency) and 7 (debug). If 3 is
              selected all levels between 0 and 3 are logged.

       use syslog = true
              If this option is false, the syslog system is disabled

       maclist file = /etc/arpalert/maclist.allow
              White list

       maclist alert file = /etc/arpalert/maclist.deny
              Black list

       maclist leases file = /var/lib/arpalert/arpalert.leases
              Dump file

       dump inter = 5
              Minimun time to wait between two leases dump

       auth request file = /etc/arpalert/authrq.conf
              List of authorized request

       lock file = /var/run/arpalert.pid
              pid file

       dump packet = false
              Only for debugging: this dump packet received on standard output. The syntax  "dump
              paquet" is also avalaible, but is deprecated

       daemon = false
              If is set to true, run the program as daemon

       interface = ""
              Comma  separated network interfaces leisten to. If this value is not specified, the
              soft select the first interface.

       catch only arp = TRUE
              Configure the network for catch only arp request.  The detection type "new_mac"  is
              deactived.  This mode is used for CPU saving if Arpalert is running on a router

       mod on detect = ""
              Module  file loaded by arpalert. This module is launched on each valid alert.  This
              system avoids a costly fork/exec

       mod config = ""
              This chain is transferred to the init function of module loaded

       action on detect = ""
              Script launched on each detection. Parameters are:
               - mac address of requestor,
               - ip of requestor,
               - supp. parm.,
               - ethernet device listening on
               - type of alert,
               - optional: ethernet vendor

              type of alert:
              0: IP change
              1: Mac address already detected but not in white list
              2: Mac address in black list
              3: New mac address
              4: Unauthorized arp request
              5: Abusive number of arp request detected
              6: Ethernet mac address different from arp mac address
              7: Flood detected
              8: New mac address whithout ip address

       execution timeout = 10
              Script execution timeout (seconds)

       max alert = 20
              Maximun simultaneous lanched script

       dump black list = false
              Dump the black listed mac address in leases file

       dump white list = false
              Dump the white listed mac address in leases file

       dump new address = true
              Dump the new mac address in leases file

       mac timeout = 259200
              After this time a mac address is removed from memory (seconds) (default 1 month)

       max entry = 1000000
              After this limit the memory hash is cleaned (protect to arp flood)

       anti flood interval = 10
              This sends only one mismatch alert in this time (in seconds)

       anti flood global = 50
              If the number of arp request in seconds exceeds this value, all alerts are  ignored
              for "anti flood interval" time

       mac vendor file = ""
              This file contain the association from mac address to vendor name. This file can be
              downloaded here: http://standards.ieee.org/regauth/oui/oui.txt

       log mac vendor = false
              Log vendor name

       alert mac vendor = false
              Give vendor name to script

       mod mac vendor = false
              Give vendor name to module

       log referenced address, alert on referenced address, mod on referenced address = false
              Log/launch script/call module if the address is referenced in hash but  is  not  in
              white list

       log deny address, alert on deny address, mod on deny address = true
              Log/launch script/call module if the mac address is in black list

       log new address, alert on new address, mod on new address = true
              Log/launch script/call module if the address isn't referenced

       log mac change, alert on mac change, mod on mac change = true
              Log/launch  script/call  module  if  the mac address is different from the last arp
              request with the same ip address

       log ip change, alert on ip change, mod on ip change = true
              Log/launch script/call module if the ip address is  different  from  the  last  arp
              request with the same mac address

       log unauth request, alert on unauth request, mod on unauth request = true
              Unauthorized arp request: launch if the request is not authorized in auth file

       ignore unknown sender = true
              Don't analyse arp request for unknow hosts (not in white list)

       ignore self test = true
              Ignore ARP self test generated by windows dhcp for unauthorized request detection

       ignore me = true
              Ignore   arp   request  with  mac  addresse  of  the  listing  interfaces  for  the
              authorizations checks

       unauth ignore time method = 2
              Select suspend time method:
              1: ignore all unauth alerts during "anti flood interval" time
              2: ignore only tuple (mac address, ip address) during "anti flood interval" time

       log request abus, alert on request abus, mod on request abus = true
              Log/launch script/call module if the number of  request  per  seconds  are  >  "max
              request"

       max request = 1000000
              Maximun request authorized by second

       log mac error, alert on mac error, mod on mac error = true
              Log/launch script/call module if the ethernet mac address is different than the arp
              mac address (only for requestor)

       log flood = true, alert on flood = true, mod on flood = true
              Log/launch script/call module if have too many arp request per seconds

       log expire mac address = true, alert on expire mac address  =  true,  mod  on  expire  mac
       address = true
              Log/launch script/call module if the ethernet mac address expire

       expire authorized mac addresses = true
              Allow authorized mac addresses to expire

DATA FILES FORMATS

       /etc/arpalert/maclist.allow and /etc/arpalert/maclist.deny:
              All the line with # as a first caracter are ignored
              The data on this file take this form
              <MAC_ADRESS> <IP_ADDRESS> <DEVICE> [<FLAG> <FLAG> <FLAG> ...]
              The available flags are:
              ip_change: Ignore ip change alert for this mac address
              black_listed: Ignore black list alerts for this mac address
              unauth_rq: Ignore unauthorized requests for this mac address
              rq_abus: Ignore request abuse for this mac address
              mac_error: Ignore mac error for this mac address
              mac_change: Ignore mac change for this mac address
              mac_expire:  Never expire this mac address. Useful if the option "expire authorized
              mac addresses" is used

       /etc/arpalert/authrq.conf:
              All the words after # character are ignored
              All the blank characters are ignored
              The authorisations list for one mac address begins by the mac address into brackets
              All the next values are ip hosts addresses  or  ip  networks  addresses  (with  /xx
              notion)
              [<MAC_ADRESS> <DEVICE>] <IP_ADRESS>
              <IP_ADRESS>/<BITS>

FILES

       sbin/arpalert: binary file
       etc/arpalert/arpalert.conf: default config file
       var/run/arpalert.pid: pid file
       var/state/arpalert.leases: leases file

                                            2006-05-09                                ARPALERT(8)