Provided by: netsniff-ng_0.6.4-1_amd64 
NAME
bpfc - a Berkeley Packet Filter assembler and compiler
SYNOPSIS
bpfc { [options] | [source-file] }
DESCRIPTION
bpfc is a small Berkeley Packet Filter assembler and compiler which is able to translate
BPF assembler-like mnemonics into a numerical or C-like format, that can be read by tools
such as netsniff-ng, iptables (xt_bpf) and many others. BPF is the one and only upstream
filtering construct that is used in combination with packet(7) sockets, but also seccomp-
BPF for system call sandboxing.
The Linux kernel and also BSD kernels implement "virtual machine" like constructs and JIT
compilers that mimic a small register-based machine in BPF architecture and execute filter
code that is, for example, composed by bpfc on a data buffer that is given by network
packets. The purpose of this is to shift computation in time, so that the kernel can drop
or truncate incoming packets as early as possible without having to push them to user
space for further analysis first. Meanwhile, BPF constructs also find application in other
areas such as in the communication between user and kernel space like system call sand-
boxing.
At the time of writing this man page, the only other available BPF compiler is part of the
pcap(3) library and accessible through a high-level filter language that might be familiar
to many people as tcpdump-like filters.
However, it is quite often useful to bypass that compiler and write optimized code that
cannot be produced by the pcap(3) compiler, or is wrongly optimized, or is defective on
purpose in order to debug test kernel code. Also, a reason to use bpfc could be to try out
some new BPF extensions that are not supported by other compilers. Furthermore, bpfc can
be useful to verify JIT compiler behavior or to find possible bugs that need to be fixed.
bpfc is implemented with the help of flex(1) and bison(1), tokenizes the source file in
the first stage and parses its content into an AST. In two code generation stages it emits
target opcodes. bpfc furthermore supports Linux kernel BPF extensions. More about that can
be found in the syntax section.
The Linux kernel BPF JIT compiler is automatically turned on if detected by netsniff-ng.
However, it can also be manually turned on through the command ''echo "1" >
/proc/sys/net/core/bpf_jit_enable'' (normal working mode) or ''echo "2" >
/proc/sys/net/core/bpf_jit_enable'' (debug mode where emitted opcodes of the image are
printed to the kernel log). An architecture agnostic BPF JIT image disassembler can be
found in the kernel source tree under ''tools/net/bpf_jit_disasm.c'' or within the
netsniff-ng Git repository.
OPTIONS
-i <source-file/->, --input <source-file/->
Read BPF assembly instruction from an input file or from stdin.
-p, --cpp
Pass the bpf program through the C preprocessor before reading it in bpfc. This allows
#define and #include directives (e.g. to include definitions from system headers) to be
used in the bpf program.
-D <name>=<definition>, --define <name>=<definition>
Add macro definition for the C preprocessor to use it within bpf file. This option is used
in combination with the -p,--cpp option.
-f <format>, --format <format>
Specify a different output format than the default that is netsniff-ng compatible. The
<format> specifier can be: C, netsniff-ng, xt_bpf, tcpdump.
-b, --bypass
Bypass basic filter validation when emitting opcodes. This can be useful for explicitly
creating malformed BPF expressions for injecting into the kernel, for example, for bug
testing.
-V, --verbose
Be more verbose and display some bpfc debugging information.
-d, --dump
Dump all supported instructions to stdout.
-v, --version
Show version information and exit.
-h, --help
Show user help and exit.
SYNTAX
The BPF architecture resp. register machine consists of the following elements:
Element Description
A 32 bit wide accumulator
X 32 bit wide X register
M[] 16 x 32 bit wide misc registers aka “scratch memory store”,
addressable from 0 to 15
A program, that is translated by bpfc into ''opcodes'' is an array that consists of the
following elements:
o:16, jt:8, jf:8, k:32
The element o is a 16 bit wide opcode that has a particular instruction encoded, jt and jf
are two 8 bit wide jump targets, one for condition
''true'', one for condition ''false''. Last but not least the 32 bit wide element k
contains a miscellaneous argument that can be interpreted in different ways depending on
the given instruction resp. opcode.
The instruction set consists of load, store, branch, alu, miscellaneous and return
instructions that are also represented in bpfc syntax. This table also includes bpfc's own
extensions. All operations are based on unsigned data structures:
Instruction Addressing mode Description
ld 1, 2, 3, 4, 10 Load word into A
ldi 4 Load word into A
ldh 1, 2 Load half-word into A
ldb 1, 2 Load byte into A
ldx 3, 4, 5, 10 Load word into X
ldxi 4 Load word into X
ldxb 5 Load byte into X
st 3 Copy A into M[]
stx 3 Copy X into M[]
jmp 6 Jump to label
ja 6 Jump to label
jeq 7, 8 Jump on k == A
jneq 8 Jump on k != A
jne 8 Jump on k != A
jlt 8 Jump on k < A
jle 8 Jump on k <= A
jgt 7, 8 Jump on k > A
jge 7, 8 Jump on k >= A
jset 7, 8 Jump on k & A
add 0, 4 A + <x>
sub 0, 4 A - <x>
mul 0, 4 A * <x>
div 0, 4 A / <x>
mod 0, 4 A % <x>
neg 0, 4 !A
and 0, 4 A & <x>
or 0, 4 A | <x>
xor 0, 4 A ^ <x>
lsh 0, 4 A << <x>
rsh 0, 4 A >> <x>
tax Copy A into X
txa Copy X into A
ret 4, 9 Return
Addressing mode Syntax Description
0 x/%x Register X
1 [k] BHW at byte offset k in the packet
2 [x + k] BHW at the offset X + k in the packet
3 M[k] Word at offset k in M[]
4 #k Literal value stored in k
5 4*([k]&0xf) Lower nibble * 4 at byte offset k in the packet
6 L Jump label L
7 #k,Lt,Lf Jump to Lt if true, otherwise jump to Lf
8 #k,Lt Jump to Lt if predicate is true
9 a/%a Accumulator A
10 extension BPF extension (see next table)
Extension (and alias) Description
#len, len, #pktlen, pktlen Length of packet (skb->len)
#pto, pto, #proto, proto Ethernet type field (skb->protocol)
#type, type Packet type (**) (skb->pkt_type)
#poff, poff Detected payload start offset
#ifx, ifx, #ifidx, ifidx Interface index (skb->dev->ifindex)
#nla, nla Netlink attribute of type X with offset A
#nlan, nlan Nested Netlink attribute of type X with offset A
#mark, mark Packet mark (skb->mark)
#que, que, #queue, queue, #Q, Q NIC queue index (skb->queue_mapping)
#hat, hat, #hatype, hatype NIC hardware type (**) (skb->dev->type)
#rxh, rxh, #rxhash, rxhash Receive hash (skb->rxhash)
#cpu, cpu Current CPU (raw_smp_processor_id())
#vlant, vlant, #vlan_tci, vlan_tci VLAN TCI value (vlan_tx_tag_get(skb))
#vlanp, vlanp VLAN present (vlan_tx_tag_present(skb))
Further extension details (**) Value
#type, type 0 - to us / host
1 - to all / broadcast
2 - to group / multicast
3 - to others (promiscuous mode)
4 - outgoing of any type
#hat, hat, #hatype, hatype 1 - Ethernet 10Mbps
8 - APPLEtalk
19 - ATM
24 - IEEE 1394 IPv4 - RFC 2734
32 - InfiniBand
768 - IPIP tunnel
769 - IP6IP6 tunnel
772 - Loopback device
778 - GRE over IP
783 - Linux-IrDA
801 - IEEE 802.11
802 - IEEE 802.11 + Prism2 header
803 - IEEE 802.11 + radiotap header
823 - GRE over IP6
824 - Netlink
[...] See include/uapi/linux/if_arp.h
Note that the majority of BPF extensions are available on Linux only.
There are two types of comments in bpfc source-files:
1. Multi-line C-style comments: /* put comment here */
2. Single-line ASM-style comments: ; put comment here
Used Abbreviations:
BHW: byte, half-word, or word
SOURCE EXAMPLES
In this section, we give a couple of examples of bpfc source files, in other words, some
small example filter programs:
Only return packet headers (truncate packets):
ld poff
ret a
Only allow ARP packets:
ldh [12]
jne #0x806, drop
ret #-1
drop: ret #0
Only allow IPv4 TCP packets:
ldh [12]
jne #0x800, drop
ldb [23]
jneq #6, drop
ret #-1
drop: ret #0
Only allow IPv4 TCP SSH traffic:
ldh [12]
jne #0x800, drop
ldb [23]
jneq #6, drop
ldh [20]
jset #0x1fff, drop
ldxb 4 * ([14] & 0xf)
ldh [x + 14]
jeq #0x16, pass
ldh [x + 16]
jne #0x16, drop
pass: ret #-1
drop: ret #0
A loadable x86_64 seccomp-BPF filter to allow a given set of syscalls:
ld [4] /* offsetof(struct seccomp_data, arch) */
jne #0xc000003e, bad /* AUDIT_ARCH_X86_64 */
ld [0] /* offsetof(struct seccomp_data, nr) */
jeq #15, good /* __NR_rt_sigreturn */
jeq #231, good /* __NR_exit_group */
jeq #60, good /* __NR_exit */
jeq #0, good /* __NR_read */
jeq #1, good /* __NR_write */
jeq #5, good /* __NR_fstat */
jeq #9, good /* __NR_mmap */
jeq #14, good /* __NR_rt_sigprocmask */
jeq #13, good /* __NR_rt_sigaction */
jeq #35, good /* __NR_nanosleep */
bad: ret #0 /* SECCOMP_RET_KILL */
good: ret #0x7fff0000 /* SECCOMP_RET_ALLOW */
Allow any (hardware accelerated) VLAN:
ld vlanp
jeq #0, drop
ret #-1
drop: ret #0
Only allow traffic for (hardware accelerated) VLAN 10:
ld vlant
jneq #10, drop
ret #-1
drop: ret #0
More pedantic check for the above VLAN example:
ld vlanp
jeq #0, drop
ld vlant
jneq #10, drop
ret #-1
drop: ret #0
Filter rtnetlink messages
ldh #proto /* A = skb->protocol */
jneq #0, skip /* check for NETLINK_ROUTE */
ldb [4] /* A = nlmsg_type */
jneq #0x10, skip /* check type == RTNL_NEWLINK */
ldx #16 /* X = offset(ifinfomsg) */
ldb [x + 4] /* offset(ifi_index) */
jneq #0x3, skip /* check ifindex == 3 */
ld #32 /* A = len(nlmsghdr) + len(ifinfomsg), payload offset */
ldx #16 /* X = IFLA_OPERSTATE */
ld #nla /* A = offset(IFLA_OPERSTATE) */
jeq #0, skip
tax
ldb [x + 4] /* A = value(IFLA_OPERSTATE) */
jneq #0x6, skip /* check oper state is UP */
ret #-1
skip: ret #0
USAGE EXAMPLE
bpfc fubar
Compile the source file ''fubar'' into BPF opcodes. Opcodes will be directed to stdout.
bpfc -f xt_bpf -b -p -i fubar, resp. iptables -A INPUT -m bpf --bytecode `bpfc -f xt_bpf -i
fubar` -j LOG
Compile the source file ''fubar'' into BPF opcodes, bypass basic filter validation and
emit opcodes in netfilter's xt_bpf readable format. Note that the source file ''fubar'' is
first passed to the C preprocessor for textual replacements before handing over to the
bpfc compiler.
bpfc -
Read bpfc instruction from stdin and emit opcodes to stdout.
bpfc foo > bar, resp. netsniff-ng -f bar ...
Compile filter instructions from file foo and redirect bpfc's output into the file bar,
that can then be read by netsniff-ng(8) through option -f.
bpfc -f tcpdump -i fubar
Output opcodes from source file fubar in the same behavior as ''tcpdump -ddd''.
LEGAL
bpfc is licensed under the GNU GPL version 2.0.
HISTORY
bpfc was originally written for the netsniff-ng toolkit by Daniel Borkmann. It is
currently maintained by Tobias Klauser <tklauser@distanz.ch> and Daniel Borkmann
<dborkma@tik.ee.ethz.ch>.
SEE ALSO
netsniff-ng(8), trafgen(8), mausezahn(8), ifpps(8), flowtop(8), astraceroute(8),
curvetun(8)
AUTHOR
Manpage was written by Daniel Borkmann.
COLOPHON
This page is part of the Linux netsniff-ng toolkit project. A description of the project,
and information about reporting bugs, can be found at http://netsniff-ng.org/.