NAME

       fence_pve - Fencing agent for the Proxmox Virtual Environment

DESCRIPTION

       The fence_pve agent can be used to fence virtual machines acting as nodes in a virtualized
       cluster.

       fence_pve accepts options on the  command  line  as  well  as  from  stdin.  Fenced  sends
       parameters  through  stdin  when  it  execs the agent. fence_pve can be run by itself with
       command line options.  This is useful for testing and for turning outlets on or  off  from
       scripts.

       Vendor URL: http://www.proxmox.com/

PARAMETERS

       -o, --action=[action]
              Fencing action (Default Value: reboot)

       -4, --inet4-only
              Forces agent to use IPv4 addresses only

       -6, --inet6-only
              Forces agent to use IPv6 addresses only

       -a, --ip=[ip]
              IP  Address  or  Hostname  of  a node within the Proxmox cluster. This parameter is
              always required.

       -u, --ipport=[port]
              TCP/UDP port to use for connection with device (Default Value:  8006)

       -p, --password=[password]
              Login password or passphrase

       -S, --password-script=[script]
              Script to run to retrieve password

       -n, --plug=[id]
              Id of the virtual machine. This parameter is always required.

       -l, --username=[name]
              Login name (Default Value: root@pam)

       -N, --nodename
              Node  on  which  machine  is  located. (Optional, will be automatically determined)

       -q, --quiet
              Disable logging to stderr. Does not affect --verbose or --debug logging to  syslog.

       -v, --verbose
              Verbose mode

       -D, --debug-file=[debugfile]
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       -C, --separator=[char]
              Separator for CSV created by 'list' operation (Default Value: ,)

       --delay=[seconds]
              Wait X seconds before fencing is started (Default Value: 0)

       --login-timeout=[seconds]
              Wait X seconds for cmd prompt after login (Default Value: 5)

       --power-timeout=[seconds]
              Test X seconds for status change after ON/OFF (Default Value: 20)

       --power-wait=[seconds]
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       --shell-timeout=[seconds]
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       --retry-on=[attempts]
              Count of attempts to retry power on (Default Value: 1)

ACTIONS

       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       list   List  available  plugs  with  aliases/virtual machines if there is support for more
              then one device. Returns N/A otherwise.

       list-status
              List available plugs with aliases/virtual machines and their power state if it  can
              be obtained without additional commands.

       monitor
              Check the health of fence device

       metadata
              Display the XML metadata describing this resource.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS

       action Fencing action (Default Value: reboot)

       inet4_only
              Forces agent to use IPv4 addresses only

       inet6_only
              Forces agent to use IPv6 addresses only

       ip     IP  Address  or  Hostname  of  a node within the Proxmox cluster. This parameter is
              always required. Obsoletes: ipaddr

       ipport TCP/UDP port to use for connection with device (Default Value:  8006)

       password
              Login password or passphrase Obsoletes: passwd

       password_script
              Script to run to retrieve password Obsoletes: passwd_script

       plug   Id of the virtual machine. This parameter is always required. Obsoletes: port

       username
              Login name (Default Value: root@pam) Obsoletes: login

       nodename
              Node on which machine is located.  (Optional,  will  be  automatically  determined)
              Obsoletes: node_name

       quiet  Disable  logging to stderr. Does not affect --verbose or --debug logging to syslog.

       verbose
              Verbose mode

       debug_file
              Write debug information to given file Obsoletes: debug

       version
              Display version information and exit

       help   Display help and exit

       separator
              Separator for CSV created by 'list' operation (Default Value: ,)

       delay  Wait X seconds before fencing is started (Default Value: 0)

       login_timeout
              Wait X seconds for cmd prompt after login (Default Value: 5)

       power_timeout
              Test X seconds for status change after ON/OFF (Default Value: 20)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       shell_timeout
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       retry_on
              Count of attempts to retry power on (Default Value: 1)