Provided by: libreswan_3.23-4_amd64 bug

NAME

       ipsec_pluto, ipsec_whack, pluto - ipsec whack : IPsec IKE keying daemon and control
       interface

SYNOPSIS

       ipsec pluto [--help] [--version] [--leak-detective] [--config filename] [--vendorid VID]
             [--nofork] [--stderrlog] [----plutostderrlogtime] [--logfile filename] [--use-klips]
             [--use-mast] [--use-netkey] [--use-nostack] [--uniqueids]
             [--virtual-private network_list] [--keep-alive delay_sec] [--force-busy]
             [--nocrsend] [--strictcrlpolicy] [--crlcheckinterval] [--interface interfacename]
             [--listen ipaddr] [--ikeport portnumber] [--natikeport portnumber] [--rundir path]
             [--secretsfile secrets-file] [--nhelpers number] [--seedbits numbits] [--perpeerlog]
             [--perpeerlogbase dirname] [--ipsecdir dirname] [--nssdir dirname]
             [--coredir dirname] [--statsbin filename] [--secctx-attr-type number]

       ipsec whack [--help] [--version]

       ipsec whack [--debug all] [--debug none] [--debug list] [--debug class] [--debug no-class]
             [--debug-all (obsolete)] [--debug-none (obsolete)] [--impair list] [--impair none]
             [--impair behaviour] [--impair no-behaviour]

       ipsec whack --name connection-name [[--ipv4] | [--ipv6]] [[--tunnelipv4] | [--tunnelipv6]]
             [--id identity] [--host ip-address] [--cert friendly_name] [--ckaid CKAID]
             [--ca distinguished name] [--groups access control groups]
             [--sendcert yes | forced | always | ifasked | no | never]
             [--sendca none | issuer | all] [--certtype number] [--ikeport portnumber]
             [--nexthop ip-address] [[--client subnet] | [--clientwithin subnet]]
             [--clientprotoport protocol/port] [--srcip ip-address] [--xauthserver]
             [--xauthclient] [--modecfgserver] [--modecfgclient]
             [--modecfgdns ip-address, ip-address, ...]
             [--modecfgdomains DNS-domain, DNS-domain, ...] [--modecfgbanner login-banner]
             [--dnskeyondemand] [--updown updown]
             --to
             [--id identity] [--host ip-address] [--cert friendly_name] [--ckaid CKAID]
             [--ca distinguished name] [--groups access control groups]
             [--sendcert yes | always | ifasked | no | never] [--certtype number]
             [--ikeport port-number] [--nexthop ip-address] [--client subnet]
             [--clientwithin subnet] [--clientprotoport protocol/port] [--srcip ip-address]
             [--xauthserver] [--xauthclient] [--modecfgserver] [--modecfgclient]
             [--modecfgdns ip-address, ip-address, ...]
             [--modecfgdomains DNS-domain, DNS-domain, ...] [--dnskeyondemand] [--updown updown]

             [--tunnel] [--psk] [--rsasig] [--encrypt] [--authenticate] [--compress] [--pfs]
             [--pfsgroup [modp1024] | [modp1536] | [modp2048] | [modp3072] | [modp4096] | [modp6144] | [modp8192] | [dh22] | [dh23] | [dh24]]
             [--disablearrivalcheck] [--ikelifetime seconds] [--ipseclifetime seconds]
             [--rekeymargin seconds] [--rekeyfuzz percentage] [--keyingtries count]
             [--esp esp-algos] [--dontrekey] [--aggrmode] [--modecfgpull] [--metric metric]
             [--nflog-group nflognum] [--conn-mark mark/mask] [[--dpddelay seconds] |
             [--dpdtimeout seconds]] [--dpdaction [clear] | [hold] | [restart]] [--forceencaps]
             [--no-keep-alive] [[--initiateontraffic] | [--pass] | [--drop] | [--reject]]
             [[--failnone] | [--failpass] | [--faildrop] | [--failreject]] [--rundir path]
             [--ctlsocket path/file] [--label string]

       ipsec whack --keyid id [--addkey] [--pubkeyrsa key] [--rundir path]
             [--ctlsocket path/file] [--label string]

       ipsec whack --listen | --unlisten  [--rundir path] [--ctlsocket path/file]
             [--label string]

       ipsec whack --busy | --relax  [--rundir path] [--ctlsocket path/file]

       ipsec whack --route | --unroute  --name connection-name [--rundir path]
             [--ctlsocket path/file] [--label string]

       ipsec whack --initiate | [--remote-host ip-address] | --terminate  --name connection-name
             [--xauthuser user] [--xauthpass pass] [--asynchronous] [--rundir path]
             [--ctlsocket path/file] [--label string]

       ipsec whack [[--tunnelipv4] | [--tunnelipv6]] --oppohere ip-address --oppothere ip-address

       ipsec whack --crash [ipaddress]

       ipsec whack --whackrecord [filename]

       ipsec whack --whackstoprecord

       ipsec whack --name connection-name --delete [--ctlbase path] [--label string]

       ipsec whack --deletestate state-number [--rundir path] [--ctlsocket path/file]
             [--label string]

       ipsec whack --deleteuser --name username [--rundir path] [--ctlsocket path/file]
             [--label string]

       ipsec whack [--name connection-name] [--debug all] [--debug none] [--debug list]
             [--debug class] [--debug no-class] [--debug-all (obsolete)]
             [--debug-none (obsolete)] [--impair list] [--impair none] [--impair behaviour]
             [--impair no-behaviour]

       ipsec whack [--utc] [--listall] [--listpubkeys] [--listcerts] [--listcacerts] [--listcrls]

       ipsec whack [--utc] [--rereadsecrets] [--fetchcrls] [--rereadall]

       ipsec whack --listevents

       ipsec whack --purgeocsp

       ipsec whack --status [--rundir path] [--ctlsocket path/file] [--label string]

       ipsec whack --trafficstatus --shuntstatus [--rundir path] [--ctlsocket path/file]
             [--label string]

       ipsec whack [--ike-socket-bufsize bufsize] [--ike-socket-errqueue-toggle] [--rundir path]
             [--ctlsocket path/file] [--label string]

       ipsec whack --shutdown [--rundir path] [--ctlsocket path/file] [--label string]

DESCRIPTION

       pluto is an IKE ("IPsec Key Exchange") daemon.  whack is an auxiliary program to allow
       requests to be made to a running pluto.

       pluto is used to automatically build shared "security associations" on a system that has
       IPsec, the secure IP protocol. In other words, pluto can eliminate much of the work of
       manual keying. The actual secure transmission of packets is the responsibility of other
       parts of the system - the kernel. Pluto can talk to various kernel implementations, such
       as KLIPS, such as NETKEY, and such as KAME IPsec stacks.  ipsec_auto(8) provides a more
       convenient interface to pluto and whack.

   IKE's Job
       A Security Association (SA) is an agreement between two network nodes on how to process
       certain traffic between them. This processing involves encapsulation, authentication,
       encryption, or compression.

       IKE can be deployed on a network node to negotiate Security Associations for that node.
       These IKE implementations can only negotiate with other IKE implementations, so IKE must
       be on each node that is to be an endpoint of an IKE-negotiated Security Association. No
       other nodes need to be running IKE.

       An IKE instance (i.e. an IKE implementation on a particular network node) communicates
       with another IKE instance using UDP IP packets, so there must be a route between the nodes
       in each direction.

       The negotiation of Security Associations requires a number of choices that involve
       tradeoffs between security, convenience, trust, and efficiency. These are policy issues
       and are normally specified to the IKE instance by the system administrator.

       IKE deals with two kinds of Security Associations. The first part of a negotiation between
       IKE instances is to build an ISAKMP SA. An ISAKMP SA is used to protect communication
       between the two IKEs. IPsec SAs can then be built by the IKEs - these are used to carry
       protected IP traffic between the systems.

       The negotiation of the ISAKMP SA is known as Phase 1. In theory, Phase 1 can be
       accomplished by a couple of different exchange types. Currently, Main Mode and Aggressive
       Mode are implemented.

       Any negotiation under the protection of an ISAKMP SA, including the negotiation of IPsec
       SAs, is part of Phase 2. The exchange type that we use to negotiate an IPsec SA is called
       Quick Mode.

       IKE instances must be able to authenticate each other as part of their negotiation of an
       ISAKMP SA. This can be done by several mechanisms described in the draft standards.

       IKE negotiation can be initiated by any instance with any other. If both can find an
       agreeable set of characteristics for a Security Association, and both recognize each
       others authenticity, they can set up a Security Association. The standards do not specify
       what causes an IKE instance to initiate a negotiation.

       In summary, an IKE instance is prepared to automate the management of Security
       Associations in an IPsec environment, but a number of issues are considered policy and are
       left in the system administrator's hands.

   Pluto
       pluto is an implementation of IKE. It runs as a daemon on a network node. Currently, this
       network node must be a LINUX system running the KLIPS or NETKEY implementation of IPsec,
       or a FreeBSD/NetBSD/Mac OSX system running the KAME implementation of IPsec.

       pluto implements a large subset of IKE. This is enough for it to interoperate with other
       instances of pluto, and many other IKE implementations.

       The policy for acceptable characteristics for Security Associations is mostly hardwired
       into the code of pluto (spdb.c). Eventually this will be moved into a security policy
       database with reasonable expressive power and more convenience.

       pluto uses shared secrets or RSA signatures to authenticate peers with whom it is
       negotiating. These RSA signatures can come from DNS(SEC), a configuration file, or from
       X.509 and CA certificates.

       pluto initiates negotiation of a Security Association when it is manually prodded: the
       program whack is run to trigger this. It will also initiate a negotiation when KLIPS traps
       an outbound packet for Opportunistic Encryption.

       pluto implements ISAKMP SAs itself. After it has negotiated the characteristics of an
       IPsec SA, it directs the kernel to implement it. If necessary, it also invokes a script to
       adjust any firewall and issue route(8) commands to direct IP packets.

       When pluto shuts down, it closes all Security Associations.

   Before Running Pluto
       pluto runs as a daemon with userid root. Before running it, a few things must be set up.

       pluto requires a working IPsec stack.

       pluto supports multiple public networks (that is, networks that are considered insecure
       and thus need to have their traffic encrypted or authenticated). It discovers the public
       interfaces to use by looking at all interfaces that are configured (the --interface option
       can be used to limit the interfaces considered). It does this only when whack tells it to
       --listen, so the interfaces must be configured by then. Each interface with a name of the
       form ipsec[0-9] is taken as a KLIPS virtual public interface. Another network interface
       with the same IP address (the first one found will be used) is taken as the corresponding
       real public interface. The --listen can be used to limit listening on only 1 IP address of
       a certain interface.  ifconfig(8) or ip(8) with the -a flag will show the name and status
       of each network interface.

       pluto requires a database of preshared secrets and RSA private keys. This is described in
       the ipsec.secrets(5).  pluto is told of RSA public keys via whack commands. If the
       connection is Opportunistic, and no RSA public key is known, pluto will attempt to fetch
       RSA keys using the Domain Name System.

   Setting up KLIPS for pluto
       The most basic network topology that pluto supports has two security gateways negotiating
       on behalf of client subnets. The diagram of RGB's testbed is a good example (see
       klips/doc/rgb_setup.txt).

       The file INSTALL in the base directory of this distribution explains how to start setting
       up the whole system, including KLIPS.

       Make sure that the security gateways have routes to each other. This is usually covered by
       the default route, but may require issuing route(8) commands. The route must go through a
       particular IP interface (we will assume it is eth0, but it need not be). The interface
       that connects the security gateway to its client must be a different one.

       It is necessary to issue a ipsec_tncfg(8) command on each gateway. The required command
       is:

          ipsec tncfg --attach --virtual ipsec0 --physical eth0

       A command to set up the ipsec0 virtual interface will also need to be run. It will have
       the same parameters as the command used to set up the physical interface to which it has
       just been connected using ipsec_tncfg(8).

   Setting up NETKEY for pluto
       No special requirements are necessary to use NETKEY - it ships with all modern versions of
       Linux 2.4 and 2.6. however, note that certain vendors or older distributions use old
       versions or backports of NETKEY which are broken. If possible use a NETKEY version that is
       at least based on, or backported from Linux 2.6.11 or newer.

   ipsec.secrets file
       A pluto daemon and another IKE daemon (for example, another instance of pluto) must
       convince each other that they are who they are supposed to be before any negotiation can
       succeed. This authentication is accomplished by using either secrets that have been shared
       beforehand (manually) or by using RSA signatures. There are other techniques, but they
       have not been implemented in pluto.

       The file /etc/ipsec.secrets is used to keep preshared secret keys and XAUTH passwords. RSA
       private keys, X.509 certificates, CRLs, OCSP and smartcards are handled via NSS. For
       debugging, there is an argument to the pluto command to use a different file. This file is
       described in ipsec.secrets(5).

   Running Pluto
       To fire up the daemon, just type pluto (be sure to be running as the superuser). The
       default IKE port number is 500, the UDP port assigned by IANA for IKE Daemons.  pluto must
       be run by the superuser to be able to use the UDP 500 port. If pluto is told to enable
       NAT-Traversal, then UDP port 4500 is also taken by pluto to listen on.

       Pluto supports different IPstacks on different operating systems. This can be configured
       using one of the options --use-netkey (the default), --use-klips, --use-mast,
       --use-bsdkame, --use-win2k or --use-nostack. The latter is meant for testing only - no
       actual IPsec connections will be loaded into the kernel. The option --use-auto has been
       obsoleted. On startup, pluto might also read the protostack= option to select the IPsec
       stack to use if --config /etc/ipsec.conf is given as argument to pluto. If both --use-XXX
       and --config /etc/ipsec.conf are specified, the last command line argument specified takes
       precedence.

       Pluto supports RFC 3947 NAT-Traversal. The allowed range behind the NAT routers is
       submitted using the --virtual-private option. See ipsec.conf(5) for the syntax. The option
       --force-keepalive forces the sending of the keep-alive packets, which are send to prevent
       the NAT router from closing its port when there is not enough traffic on the IPsec
       connection. The --keep-alive sets the delay (in seconds) of these keep-alive packets. The
       newer NAT-T standards support port floating, and Libreswan enables this per default.

       Pluto supports the use of X.509 certificates and sends certificates when needed. This can
       confuse IKE implementations that do not implement this, such as the old FreeS/WAN
       implementation. The --nocrsend prevents pluto from sending these. Pluto uses NSS for all
       X.509 related data, including CAcerts, certs, CRLs and private keys. The Certificate
       Revocation Lists can also be retrieved from an URL. The option --crlcheckinterval sets the
       time between checking for CRL expiration and issuing new fetch commands. The first attempt
       to update a CRL is started at 2*crlcheckinterval before the next update time. Pluto logs a
       warning if no valid CRL was loaded or obtained for a connection. If --strictcrlpolicy is
       given, the connection will be rejected until a valid CRL has been loaded.

       Pluto can also use helper children to off-load cryptographic operations. This behavior can
       be fine tuned using the --nhelpers. Pluto will start (n-1) of them, where n is the number
       of CPU's you have (including hypherthreaded CPU's). A value of 0 forces pluto to do all
       operations in the main process. A value of -1 tells pluto to perform the above
       calculation. Any other value forces the number to that amount.

       Pluto uses the NSS crypto library as its random source. Some government Three Letter
       Agency requires that pluto reads 440 bits from /dev/random and feed this into the NSS RNG
       before drawing random from the NSS library, despite the NSS library itself already seeding
       its internal state. As this process can block pluto for an extended time, the default is
       to not perform this redundant seeding. The --seedbits option can be used to specify the
       number of bits that will be pulled from /dev/random and seeded into the NSS RNG. This can
       also be accomplished by specifying seedbits in the "config setup" section of ipsec.conf.
       This option should not be used by most people.

       pluto attempts to create a lockfile with the name /var/run/pluto/pluto.pid. If the
       lockfile cannot be created, pluto exits - this prevents multiple plutos from competing Any
       "leftover" lockfile must be removed before pluto will run.  pluto writes its PID into this
       file so that scripts can find it. This lock will not function properly if it is on an NFS
       volume (but sharing locks on multiple machines doesn't make sense anyway).

       pluto then forks and the parent exits. This is the conventional "daemon fork". It can make
       debugging awkward, so there is an option to suppress this fork. In certain configurations,
       pluto might also launch helper programs to assist with DNS queries or to offload
       cryptographic operations.

       All logging, including diagnostics, is sent to syslog(3) with facility=authpriv; it
       decides where to put these messages (possibly in /var/log/secure or /var/log/auth.log).
       Since this too can make debugging awkward, the option --stderrlog is used to steer logging
       to stderr.

       Alternatively, --logfile can be used to send all logging information to a specific file.

       If the --perpeerlog option is given, then pluto will open a log file per connection. By
       default, this is in /var/log/pluto/peer, in a subdirectory formed by turning all dot (.)
       [IPv4] or colon (:) [IPv6] into slashes (/).

       The base directory can be changed with the --perpeerlogbase.

       Once pluto is started, it waits for requests from whack.

   Pluto's Internal State
       To understand how to use pluto, it is helpful to understand a little about its internal
       state. Furthermore, the terminology is needed to decipher some of the diagnostic messages.

       Pluto supports food groups for Opportunistic IPsec. The policies for these are located in
       /etc/ipsec.d/policies, or another directory as specified by --ipsecdir.

       Pluto supports X.509 Certificates. All certificate handling is done using the NSS library
       and all certificate material is stored in an NSS database in /var/lib/ipsec/nss or another
       directory as specified by --ipsecdir.

       Pluto may core dump. It will normally do so into the current working directory. You can
       specify the --coredir option for pluto, or specify the dumpdir= option in ipsec.conf.

       If you are investigating a potential memory leak in pluto, start pluto with the
       --leak-detective option. Before the leak causes the system or pluto to die, shut down
       pluto in the regular way. pluto will display a list of leaks it has detected.

       The (potential) connection database describes attributes of a connection. These include
       the IP addresses of the hosts and client subnets and the security characteristics desired.
       pluto requires this information (simply called a connection) before it can respond to a
       request to build an SA. Each connection is given a name when it is created, and all
       references are made using this name.

       During the IKE exchange to build an SA, the information about the negotiation is
       represented in a state object. Each state object reflects how far the negotiation has
       reached. Once the negotiation is complete and the SA established, the state object remains
       to represent the SA. When the SA is terminated, the state object is discarded. Each State
       object is given a serial number and this is used to refer to the state objects in logged
       messages.

       Each state object corresponds to a connection and can be thought of as an instantiation of
       that connection. At any particular time, there may be any number of state objects
       corresponding to a particular connection. Often there is one representing an ISAKMP SA and
       another representing an IPsec SA.

       KLIPS hooks into the routing code in a LINUX kernel. Traffic to be processed by an IPsec
       SA must be directed through KLIPS by routing commands. Furthermore, the processing to be
       done is specified by ipsec eroute(8) commands.  pluto takes the responsibility of managing
       both of these special kinds of routes.

       NETKEY requires no special routing.

       Each connection may be routed, and must be while it has an IPsec SA. The connection
       specifies the characteristics of the route: the interface on this machine, the "gateway"
       (the nexthop), and the peer's client subnet. Two connections may not be simultaneously
       routed if they are for the same peer's client subnet but use different interfaces or
       gateways (pluto's logic does not reflect any advanced routing capabilities).

       On KLIPS, each eroute is associated with the state object for an IPsec SA because it has
       the particular characteristics of the SA. Two eroutes conflict if they specify the
       identical local and remote clients (unlike for routes, the local clients are taken into
       account).

       When pluto needs to install a route for a connection, it must make sure that no
       conflicting route is in use. If another connection has a conflicting route, that route
       will be taken down, as long as there is no IPsec SA instantiating that connection. If
       there is such an IPsec SA, the attempt to install a route will fail.

       There is an exception. If pluto, as Responder, needs to install a route to a fixed client
       subnet for a connection, and there is already a conflicting route, then the SAs using the
       route are deleted to make room for the new SAs. The rationale is that the new connection
       is probably more current. The need for this usually is a product of Road Warrior
       connections (these are explained later; they cannot be used to initiate).

       When pluto needs to install an eroute for an IPsec SA (for a state object), first the
       state object's connection must be routed (if this cannot be done, the eroute and SA will
       not be installed). If a conflicting eroute is already in place for another connection, the
       eroute and SA will not be installed (but note that the routing exception mentioned above
       may have already deleted potentially conflicting SAs). If another IPsec SA for the same
       connection already has an eroute, all its outgoing traffic is taken over by the new
       eroute. The incoming traffic will still be processed. This characteristic is exploited
       during rekeying.

       All of these routing characteristics are expected change when KLIPS and NETKEY merge into
       a single new stack.

   Using whack
       whack is used to command a running pluto.  whack uses a UNIX domain socket to speak to
       pluto (by default, /var/pluto.ctl).

       whack has an intricate argument syntax. This syntax allows many different functions to be
       specified. The help form shows the usage or version information. The connection form gives
       pluto a description of a potential connection. The public key form informs pluto of the
       RSA public key for a potential peer. The delete form deletes a connection description and
       all SAs corresponding to it. The listen form tells pluto to start or stop listening on the
       public interfaces for IKE requests from peers. The route form tells pluto to set up
       routing for a connection; the unroute form undoes this. The initiate form tells pluto to
       negotiate an SA corresponding to a connection. The terminate form tells pluto to remove
       all SAs corresponding to a connection, including those being negotiated. The status form
       displays the pluto's internal state. The debug form tells pluto to change the selection of
       debugging output "on the fly". The shutdown form tells pluto to shut down, deleting all
       SAs.

       The crash option asks pluto to consider a particularly target IP to have crashed, and to
       attempt to restart all connections with that IP address as a gateway. In general, you
       should use Dead Peer Detection to detect this kind of situation automatically, but this is
       not always possible.

       Most options are specific to one of the forms, and will be described with that form. There
       are three options that apply to all forms.

       --ctlsocket path/file
           file is used as the UNIX domain socket for talking to pluto. Use either this option or
           --rundir, but not both.

       --rundir path
           path where the UNIX domain socket for talking to the pluto, the pluto.pid file and the
           pluto.lock files are found. Use either this option or --ctlsocket, but not both.

       --label string
           adds the string to all error messages generated by whack.

       The help form of whack is self-explanatory.

       --help
           display the usage message.

       --version
           display the version of whack.

       The connection form describes a potential connection to pluto.  pluto needs to know what
       connections can and should be negotiated. When pluto is the initiator, it needs to know
       what to propose. When pluto is the responder, it needs to know enough to decide whether is
       is willing to set up the proposed connection.

       The description of a potential connection can specify a large number of details. Each
       connection has a unique name. This name will appear in a updown shell command, so it
       should not contain punctuation that would make the command ill-formed.

       --name connection-name
           sets the name of the connection

       The topology of a connection is symmetric, so to save space here is half a picture:

          client_subnet<-->host:ikeport<-->nexthop<---

       A similar trick is used in the flags. The same flag names are used for both ends. Those
       before the --to flag describe the left side and those afterwards describe the right side.
       When pluto attempts to use the connection, it decides whether it is the left side or the
       right side of the connection, based on the IP numbers of its interfaces.

       --id id
           the identity of the end. Currently, this can be an IP address (specified as dotted
           quad or as a Fully Qualified Domain Name, which will be resolved immediately) or as a
           Fully Qualified Domain Name itself (prefixed by "@" to signify that it should not be
           resolved), or as user@FQDN, or an X.509 DN.  Pluto only authenticates the identity,
           and does not use it for addressing, so, for example, an IP address need not be the one
           to which packets are to be sent. If the option is absent, the identity defaults to the
           IP address specified by --host.

       --host ip-address, --host %any, --host %opportunistic
           the IP address of the end (generally the public interface). If pluto is to act as a
           responder for IKE negotiations initiated from unknown IP addresses (the "Road Warrior"
           case), the IP address should be specified as %any (currently, the obsolete notation
           0.0.0.0 is also accepted for this). If pluto is to opportunistically initiate the
           connection, use %opportunistic

       --cert friendly_name
           The friendly_name (or nickname) of the X.509 certificate that was used when imported
           the certificate into the NSS database. See ipsec.conf(5) on how to extract this from
           the PKCS#12 file.

       --ckaid CKAID
           The hex CKAID of the X.509 certificate. Certificates are stored in the NSS database.

       --ca distinguished name
           the X.509 Certificate Authority's Distinguished Name (DN) used as trust anchor for
           this connection. This is the CA certificate that signed the host certificate, as well
           as the certificate of the incoming client.

       --groups access control groups
           the access control groups used.

       --sendcert yes|forced|always|ifasked|no|never
           Whether or not to send our X.509 certificate credentials. This could potentially give
           an attacker too much information about which identities are allowed to connect to this
           host. The default is to use ifasked when we are a Responder, and to use yes (which is
           the same as forced and always if we are an Initiator. The values no and never are
           equivalent. NOTE: "forced" does not seem to be actually implemented - do not use it.

       --sendca none|issuer|all
           How much of our available X.509 trust chain to send with the end certificate,
           excluding any root CAs. Specifying issuer sends just the issuing intermediate CA,
           while
            all will send the entire chain of intermediate CAs.none will not send any CA certs.
           The default is none which maintains the current libreswan behavior.

       --certtype number
           The X.509 certificate type number.

       --ikeport port-number
           the UDP port that IKE listens to on that host. The default is 500. (pluto on this
           machine uses the port specified by its own command line argument, so this only affects
           where pluto sends messages.)

       --nexthop ip-address
           where to route packets for the peer's client (presumably for the peer too, but it will
           not be used for this). When pluto installs an IPsec SA, it issues a route command. It
           uses the nexthop as the gateway. The default is the peer's IP address (this can be
           explicitly written as %direct; the obsolete notation 0.0.0.0 is accepted). This option
           is necessary if pluto's host's interface used for sending packets to the peer is
           neither point-to-point nor directly connected to the peer.

       --client subnet
           the subnet for which the IPsec traffic will be destined. If not specified, the host
           will be the client. The subnet can be specified in any of the forms supported by
           ipsec_atosubnet(3). The general form is address/mask. The address can be either a
           domain name or four decimal numbers (specifying octets) separated by dots. The most
           convenient form of the mask is a decimal integer, specifying the number of leading one
           bits in the mask. So, for example, 10.0.0.0/8 would specify the class A network "Net
           10".

       --clientwithin subnet
           This option is obsolete and will be removed. Do not use this option anymore.

       --clientprotoport protocol/port
           specify the Port Selectors (filters) to be used on this connection. The general form
           is protocol/port. This is most commonly used to limit the connection to L2TP traffic
           only by specifying a value of 17/1701 for UDP (protocol 17) and port 1701. The
           notation 17/%any can be used to allow all UDP traffic and is needed for L2TP
           connections with Windows XP machines before Service Pack 2.

       --srcip ip-address
           the IP address for this host to use when transmitting a packet to the remote IPsec
           gateway itself. This option is used to make the gateway itself use its internal IP,
           which is part of the --client subnet. Otherwise it will use its nearest IP address,
           which is its public IP address, which is not part of the subnet-subnet IPsec tunnel,
           and would therefor not get encrypted.

       --xauthserver
           this end is an xauthserver. It will lookup the xauth user name and password and verify
           this before allowing the connection to get established.

       --xauthclient
           this end is an xauthclient. To bring this connection up with the --initiate also
           requires the client to specify --xauthuser username and --xauthpass password

       --xauthuser
           The username for the xauth authentication.This option is normally passed along by
           ipsec_auto(8) when an xauth connection is started using ipsec auto --up conn

       --xauthpass
           The password for the xauth authentication. This option is normally passed along by
           ipsec_auto(8) when an xauth connection is started using ipsec auto --up conn

       --modecfgserver
           this end is an Mode Config server

       --modecfgclient
           this end is an Mode Config client

       --modecfgdns
           A comma separated list of DNS server IP's to pass along to connecting clients

       --modecfgdomains
           A comma separated list of internal DNS domains to pass along to connecting clients

       --dnskeyondemand
           specifies that when an RSA public key is needed to authenticate this host, and it
           isn't already known, fetch it from DNS.

       --updown updown
           specifies an external shell command to be run whenever pluto brings up or down a
           connection. The script is used to build a shell command, so it may contain positional
           parameters, but ought not to have punctuation that would cause the resulting command
           to be ill-formed. The default is ipsec _updown. Pluto passes a dozen environment
           variables to the script about the connection involved.

       --to
           separates the specification of the left and right ends of the connection. Pluto tries
           to decide whether it is left or right based on the information provided on both sides
           of this option.

       The potential connection description also specifies characteristics of rekeying and
       security.

       --psk
           Propose and allow preshared secret authentication for IKE peers. This authentication
           requires that each side use the same secret. May be combined with --rsasig; at least
           one must be specified.

       --rsasig
           Propose and allow RSA signatures for authentication of IKE peers. This authentication
           requires that each side have have a private key of its own and know the public key of
           its peer. May be combined with --psk; at least one must be specified.

       --encrypt
           All proposed or accepted IPsec SAs will include non-null ESP. The actual choices of
           transforms are wired into pluto.

       --authenticate
           All proposed IPsec SAs will include AH. All accepted IPsec SAs will include AH or ESP
           with authentication. The actual choices of transforms are wired into pluto. Note that
           this has nothing to do with IKE authentication.

       --compress
           All proposed IPsec SAs will include IPCOMP (compression). This will be ignored if
           KLIPS is not configured with IPCOMP support.

       --tunnel
           the IPsec SA should use tunneling. Implicit if the SA is for clients. Must only be
           used with --authenticate or --encrypt.

       --ipv4
           The host addresses will be interpreted as IPv4 addresses. This is the default. Note
           that for a connection, all host addresses must be of the same Address Family (IPv4 and
           IPv6 use different Address Families).

       --ipv6
           The host addresses (including nexthop) will be interpreted as IPv6 addresses. Note
           that for a connection, all host addresses must be of the same Address Family (IPv4 and
           IPv6 use different Address Families).

       --tunnelipv4
           The client addresses will be interpreted as IPv4 addresses. The default is to match
           what the host will be. This does not imply --tunnel so the flag can be safely used
           when no tunnel is actually specified. Note that for a connection, all tunnel addresses
           must be of the same Address Family.

       --tunnelipv6
           The client addresses will be interpreted as IPv6 addresses. The default is to match
           what the host will be. This does not imply --tunnel so the flag can be safely used
           when no tunnel is actually specified. Note that for a connection, all tunnel addresses
           must be of the same Address Family.

       --pfs
           There should be Perfect Forward Secrecy - new keying material will be generated for
           each IPsec SA when running Quick Mode in IKEv1 or Create Child in IKEv2. Without this
           option, the SAKMP SA keying material is used instead.  pluto will propose the same
           group that was used with the original IKE SA.

       --pfsgroup modp-group
           Sets the Diffie-Hellman group used. Currently the following values are supported:
           modp1024 (DHgroup 2), modp1536 (DHgroup 5), modp2048 (DHgroup 14), modp3072 (DHgroup
           15), modp4096 (DHgroup 16), modp6144 (DHgroup 17), and modp8192 (DHgroup 18). It is
           possible to support the weak and broken modp768 (DHgroup 1), but this requires a
           manual recompile and is strongly discouraged.

       --disablearrivalcheck
           If the connection is a tunnel, allow packets arriving through the tunnel to have any
           source and destination addresses.

       --esp esp-algos
           ESP encryption/authentication algorithm to be used for the connection (phase2 aka
           IPsec SA). The options must be suitable as a value of ipsec_spi(8). See ipsec.conf(5)
           for a detailed description of the algorithm format.

       --aggrmode
           This tunnel is using aggressive mode ISAKMP negotiation. The default is main mode.
           Aggressive mode is less secure than main mode as it reveals your identity to an
           eavesdropper, but is needed to support road warriors using PSK keys or to interoperate
           with other buggy implementations insisting on using aggressive mode.

       --modecfgpull
           Pull the Mode Config network information from the peer.

       --dpddelay seconds
           Set the delay (in seconds) between Dead Peer Detection (RFC 3706) keepalives
           (R_U_THERE, R_U_THERE_ACK) that are sent for this connection (default 30 seconds).

       --timeout seconds
           Set the length of time (in seconds) we will idle without hearing either an R_U_THERE
           poll from our peer, or an R_U_THERE_ACK reply. After this period has elapsed with no
           response and no traffic, we will declare the peer dead, and remove the SA (default 120
           seconds).

       --dpdaction action
           When a DPD enabled peer is declared dead, what action should be taken.  hold(default)
           means the eroute will be put into %hold status, while clearmeans the eroute and SA
           with both be cleared. Clear is really only useful on the server of a Road Warrior
           config. The action restart is used on tunnels that need to be permanently up, and have
           static IP addresses. The action restart_by_peerhas been obsoleted and its
           functionality has been moved into the restart action.

       --forceencaps
           In some cases, for example when ESP packets are filtered or when a broken IPsec peer
           does not properly recognise NAT, it can be useful to force RFC-3948 encapsulation
           using this option. It causes pluto lie and tell the remote peer that RFC-3948
           encapsulation (ESP in UDP port 4500 packets) is required.

       If none of the --encrypt, --authenticate, --compress, or --pfs flags is given, the
       initiating the connection will only build an ISAKMP SA. For such a connection, client
       subnets have no meaning and must not be specified.

       Apart from initiating directly using the --initiate option, a tunnel can be loaded with a
       different policy

       --initiateontraffic
           Only initiate the connection when we have traffic to send over the connection

       --pass
           Allow unencrypted traffic to flow until the tunnel is initiated.

       --drop
           Drop unencrypted traffic silently.

       --reject
           Drop unencrypted traffic silently, but send an ICMP message notifying the other end.

       These options need to be documented

       --failnone
           to be documented

       --failpass
           to be documented

       --faildrop
           to be documented

       --failreject
           to be documented

       pluto supports various X.509 Certificate related options.

       --utc
           display all times in UTC.

       --listall
           lists all of the X.509 information known to pluto.

       --listpubkeys
           list all the public keys that have been successfully loaded.

       --listcerts
           list all the X.509 certificates that are currently loaded.

       --checkpubkeys
           list all the loaded X.509 certificates which are about to expire or have been expired.

       --listcacerts
           list all the Certificate Authority X.509 certificates that are currently loaded.

       --listcrls
           list all the loaded Certificate Revocation Lists (CRLs)

       The corresponding options --rereadsecrets, --rereadall, and --rereadcrls options reread
       this information from their respective sources, and purge all the online obtained
       information. The option --listevents lists all pending CRL fetch commands.

       --ikelifetime seconds
           how long pluto will propose that an ISAKMP SA be allowed to live. The default is 3600
           (one hour) and the maximum is 86400 (1 day). This option will not affect what is
           accepted.  pluto will reject proposals that exceed the maximum.

       --ipseclifetime seconds
           how long pluto will propose that an IPsec SA be allowed to live. The default is 28800
           (eight hours) and the maximum is 86400 (one day). This option will not affect what is
           accepted.  pluto will reject proposals that exceed the maximum.

       --rekeymargin seconds
           how long before an SA's expiration should pluto try to negotiate a replacement SA.
           This will only happen if pluto was the initiator. The default is 540 (nine minutes).

       --rekeyfuzz percentage
           maximum size of random component to add to rekeymargin, expressed as a percentage of
           rekeymargin.  pluto will select a delay uniformly distributed within this range. By
           default, the percentage will be 100. If greater determinism is desired, specify 0. It
           may be appropriate for the percentage to be much larger than 100.

       --keyingtries count
           how many times pluto should try to negotiate an SA, either for the first time or for
           rekeying. The default value of 0 means to keep trying forever.

       --dontrekey
           A misnomer. Only rekey a connection if we were the Initiator and there was recent
           traffic on the existing connection. This applies to Phase 1 and Phase 2. This is
           currently the only automatic way for a connection to terminate. It may be useful with
           Road Warrior or Opportunistic connections.  Since SA lifetime negotiation is
           take-it-or-leave it, a Responder normally uses the shorter of the negotiated or the
           configured lifetime. This only works because if the lifetime is shorter than
           negotiated, the Responder will rekey in time so that everything works. This interacts
           badly with --dontrekey. In this case, the Responder will end up rekeying to rectify a
           shortfall in an IPsec SA lifetime; for an ISAKMP SA, the Responder will accept the
           negotiated lifetime.

       --delete
           when used in the connection form, it causes any previous connection with this name to
           be deleted before this one is added. Unlike a normal delete, no diagnostic is produced
           if there was no previous connection to delete. Any routing in place for the connection
           is undone.

       --delete, --name connection-name
           The delete form deletes a named connection description and any SAs established or
           negotiations initiated using this connection. Any routing in place for the connection
           is undone.

       --deletestate state-number
           The deletestate form deletes the state object with the specified serial number. This
           is useful for selectively deleting instances of connections.

       The route form of the whack command tells pluto to set up routing for a connection.
       Although like a traditional route, it uses an ipsec device as a virtual interface. Once
       routing is set up, no packets will be sent "in the clear" to the peer's client specified
       in the connection. A TRAP shunt eroute will be installed; if outbound traffic is caught,
       Pluto will initiate the connection. An explicit whack route is not always needed: if it
       hasn't been done when an IPsec SA is being installed, one will be automatically attempted.

       --route, --name connection-name
           When a routing is attempted for a connection, there must not already be a routing for
           a different connection with the same subnet but different interface or destination, or
           if there is, it must not be being used by an IPsec SA. Otherwise the attempt will
           fail.

       --unroute, --name connection-name
           The unroute form of the whack command tells pluto to undo a routing.  pluto will
           refuse if an IPsec SA is using the connection. If another connection is sharing the
           same routing, it will be left in place. Without a routing, packets will be sent
           without encryption or authentication.

       The initiate form tells pluto to initiate a negotiation with another pluto (or other IKE
       daemon) according to the named connection. Initiation requires a route that --route would
       provide; if none is in place at the time an IPsec SA is being installed, pluto attempts to
       set one up.

       --initiate, --name connection-name, --asynchronous
           The initiate form of the whack command will relay back from pluto status information
           via the UNIX domain socket (unless --asynchronous is specified). The status
           information is meant to look a bit like that from FTP. Currently whack simply copies
           this to stderr. When the request is finished (eg. the SAs are established or pluto
           gives up), pluto closes the channel, causing whack to terminate.

       The opportunistic initiate form is mainly used for debugging.

       --tunnelipv4, --tunnelipv6, --oppohere ip-address, --oppothere ip-address
           This will cause pluto to attempt to opportunistically initiate a connection from here
           to the there, even if a previous attempt had been made. The whack log will show the
           progress of this attempt.

       Ending an connection

       --terminate, --name connection-name
           the terminate form tells pluto to delete any SAs that use the specified connection and
           to stop any negotiations in process. it does not prevent new negotiations from
           starting (the delete form has this effect).

       --crash ip-address
           If the remote peer has crashed, and therefor did not notify us, we keep sending
           encrypted traffic, and rejecting all plaintext (non-IKE) traffic from that remote
           peer. The --crash brings our end down as well for all the known connections to the
           specified ip-address

       --whackrecordfilename, --whackstoprecord
           this causes plutoto open the given filename for write, and record each of the messages
           received from whack or addconn. This continues until the whackstoprecord option is
           used. This option may not be combined with any other command. The start/stop commands
           are not recorded themselves. These files are usually used to create input files for
           unit tests, particularly for complex setups where policies may in fact overlap.

           The format of the file consists of a line starting with #!pluto-whack and the date
           that the file was started, as well as the hostname, and a linefeed. What follows are
           binary format records consisting of a 32-bit record length in bytes, (including the
           length record itself), a 64-bit timestamp, and then the literal contents of the whack
           message that was received. All integers are in host format. In order to unambigously
           determine the host order, the first record is an empty record that contains only the
           current WHACK_MAGIC value. This record is 16 bytes long.

       ip-address
           If the remote peer has crashed, and therefor did not notify us, we keep sending
           encrypted traffic, and rejecting all plaintext (non-IKE) traffic from that remote
           peer. The --crash brings our end down as well for all the known connections to the
           specified ip-address

       The public key for informs pluto of the RSA public key for a potential peer. Private keys
       must be kept secret, so they are kept in ipsec.secrets(5).

       --keyid id
           specififies the identity of the peer for which a public key should be used. Its form
           is identical to the identity in the connection. If no public key is specified, pluto
           attempts to find KEY records from DNS for the id (if a FQDN) or through reverse lookup
           (if an IP address). Note that there several interesting ways in which this is not
           secure.

       --addkey
           specifies that the new key is added to the collection; otherwise the new key replaces
           any old ones.

       --pubkeyrsa key
           specifies the value of the RSA public key. It is a sequence of bytes as described in
           RFC 2537 "RSA/MD5 KEYs and SIGs in the Domain Name System (DNS)". It is denoted in a
           way suitable for ipsec_ttodata(3). For example, a base 64 numeral starts with 0s.

       The listen form tells pluto to start listening for IKE requests on its public interfaces.
       To avoid race conditions, it is normal to load the appropriate connections into pluto
       before allowing it to listen. If pluto isn't listening, it is pointless to initiate
       negotiations, so it will refuse requests to do so. Whenever the listen form is used, pluto
       looks for public interfaces and will notice when new ones have been added and when old
       ones have been removed. This is also the trigger for pluto to read the ipsec.secrets file.
       So listen may useful more than once.

       --listen
           start listening for IKE traffic on public interfaces.

       --unlisten
           stop listening for IKE traffic on public interfaces.

       The busy and relax options tells pluto to explicitly activate or deactivate additional
       DDoS protection. Normally, these meassures are automatically activate or deactivate based
       on the number of states inside pluto. One of these DDoS protection methods is to active
       IKEv2 DCOOKIEs to defend against spoofed IKE packets.

       --busy
           place pluto into busy mode and activate anti-DDoS measures.

       --relax
           pull pluto out of busy mode and deactivate anti-DDoS measures.

       The status form will display information about the internal state of pluto: information
       about each potential connection, about each state object, and about each shunt that pluto
       is managing without an associated connection.

       --status

       The trafficstatus form will display the xauth username, add_time and the total in and out
       bytes of the IPsec SA's.

       --trafficstatus

       The shutdown form is the proper way to shut down pluto. It will tear down the SAs on this
       machine that pluto has negotiated. It does not inform its peers, so the SAs on their
       machines remain.

       --shutdown

   Examples
       It would be normal to start pluto in one of the system initialization scripts. It needs to
       be run by the superuser. Generally, no arguments are needed. To run in manually, the
       superuser can simply type

          ipsec pluto

       The command will immediately return, but a pluto process will be left running, waiting for
       requests from whack or a peer.

       Using whack, several potential connections would be described:

          ipsec whack --name silly --host 127.0.0.1 --to --host 127.0.0.2 --ikelifetime 900
       --ipseclifetime 800 --keyingtries 3

       Since this silly connection description specifies neither encryption, authentication, nor
       tunneling, it could only be used to establish an ISAKMP SA.

          ipsec whack --name conn_name --host 10.0.0.1 --client 10.0.1.0/24 --to --host 10.0.0.2
       --client 10.0.2.0/24 --encrypt

       This is something that must be done on both sides. If the other side is pluto, the same
       whack command could be used on it (the command syntax is designed to not distinguish which
       end is ours).

       Now that the connections are specified, pluto is ready to handle requests and replies via
       the public interfaces. We must tell it to discover those interfaces and start accepting
       messages from peers:

          ipsec whack --listen

       If we don't immediately wish to bring up a secure connection between the two clients, we
       might wish to prevent insecure traffic. The routing form asks pluto to cause the packets
       sent from our client to the peer's client to be routed through the ipsec0 device; if there
       is no SA, they will be discarded:

          ipsec whack --route conn_name

       Finally, we are ready to get pluto to initiate negotiation for an IPsec SA (and
       implicitly, an ISAKMP SA):

          ipsec whack --initiate --name conn_name

       A small log of interesting events will appear on standard output (other logging is sent to
       syslog).

       whack can also be used to terminate pluto cleanly, tearing down all SAs that it has
       negotiated.

          ipsec whack --shutdown

       Notification of any IPSEC SA deletion, but not ISAKMP SA deletion is sent to the peer.
       Unfortunately, such Notification is not reliable. Furthermore, pluto itself ignores
       Notifications.

   XAUTH
       If pluto needs additional authentication, such as defined by the XAUTH specifications,
       then it may ask whack to prompt the operator for username or passwords. Typically, these
       will be entered interactively. A GUI that wraps around whack may look for the 041
       (username) or 040 (password) prompts, and display them to the user.

       For testing purposes, the options --xauthuser user --xauthpass pass may be be given prior
       to the --initiate  to provide responses to the username and password prompts.

   The updown command
       Whenever pluto brings a connection up or down, it invokes the updown command. This command
       is specified using the --updown option. This allows for customized control over routing
       and firewall manipulation.

       The updown is invoked for five different operations. Each of these operations can be for
       our client subnet or for our host itself.

       prepare-host or prepare-client
           is run before bringing up a new connection if no other connection with the same
           clients is up. Generally, this is useful for deleting a route that might have been set
           up before pluto was run or perhaps by some agent not known to pluto.

       route-host or route-client
           is run when bringing up a connection for a new peer client subnet (even if
           prepare-host or prepare-client was run). The command should install a suitable route.
           Routing decisions are based only on the destination (peer's client) subnet address,
           unlike eroutes which discriminate based on source too.

       unroute-host or unroute-client
           is run when bringing down the last connection for a particular peer client subnet. It
           should undo what the route-host or route-client did.

       up-host or up-client
           is run when bringing up a tunnel eroute with a pair of client subnets that does not
           already have a tunnel eroute. This command should install firewall rules as
           appropriate. It is generally a good idea to allow IKE messages (UDP port 500) travel
           between the hosts.

       down-host or down-client
           is run when bringing down the eroute for a pair of client subnets. This command should
           delete firewall rules as appropriate. Note that there may remain some inbound IPsec
           SAs with these client subnets.

       The script is passed a large number of environment variables to specify what needs to be
       done.

       PLUTO_VERSION
           indicates what version of this interface is being used. This document describes
           version 1.1. This is upwardly compatible with version 1.0.

       PLUTO_VERB
           specifies the name of the operation to be performed (prepare-host,r prepare-client,
           up-host, up-client, down-host, or down-client). If the address family for security
           gateway to security gateway communications is IPv6, then a suffix of -v6 is added to
           the verb.

       PLUTO_CONNECTION
           is the name of the connection for which we are routing.

       PLUTO_NEXT_HOP
           is the next hop to which packets bound for the peer must be sent.

       PLUTO_INTERFACE
           is the name of the ipsec interface to be used.

       PLUTO_ME
           is the IP address of our host.

       PLUTO_MY_CLIENT
           is the IP address / count of our client subnet. If the client is just the host, this
           will be the host's own IP address / max (where max is 32 for IPv4 and 128 for IPv6).

       PLUTO_MY_CLIENT_NET
           is the IP address of our client net. If the client is just the host, this will be the
           host's own IP address.

       PLUTO_MY_CLIENT_MASK
           is the mask for our client net. If the client is just the host, this will be
           255.255.255.255.

       PLUTO_PEER
           is the IP address of our peer.

       PLUTO_PEER_CLIENT
           is the IP address / count of the peer's client subnet. If the client is just the peer,
           this will be the peer's own IP address / max (where max is 32 for IPv4 and 128 for
           IPv6).

       PLUTO_PEER_CLIENT_NET
           is the IP address of the peer's client net. If the client is just the peer, this will
           be the peer's own IP address.

       PLUTO_PEER_CLIENT_MASK
           is the mask for the peer's client net. If the client is just the peer, this will be
           255.255.255.255.

       PLUTO_MY_PROTOCOL
           lists the protocols allowed over this IPsec SA.

       PLUTO_PEER_PROTOCOL
           lists the protocols the peer allows over this IPsec SA.

       PLUTO_MY_PORT
           lists the ports allowed over this IPsec SA.

       PLUTO_PEER_PORT
           lists the ports the peer allows over this IPsec SA.

       PLUTO_MY_ID
           lists our id.

       PLUTO_PEER_ID
           Dlists our peer's id.

       PLUTO_PEER_CA
           lists the peer's CA.

       All output sent by the script to stderr or stdout is logged. The script should return an
       exit status of 0 if and only if it succeeds.

       Pluto waits for the script to finish and will not do any other processing while it is
       waiting. The script may assume that pluto will not change anything while the script runs.
       The script should avoid doing anything that takes much time and it should not issue any
       command that requires processing by pluto. Either of these activities could be performed
       by a background subprocess of the script.

   Rekeying
       When an SA that was initiated by pluto has only a bit of lifetime left, pluto will
       initiate the creation of a new SA. This applies to ISAKMP and IPsec SAs. The rekeying will
       be initiated when the SA's remaining lifetime is less than the rekeymargin plus a random
       percentage, between 0 and rekeyfuzz, of the rekeymargin.

       Similarly, when an SA that was initiated by the peer has only a bit of lifetime left,
       pluto will try to initiate the creation of a replacement. To give preference to the
       initiator, this rekeying will only be initiated when the SA's remaining lifetime is half
       of rekeymargin. If rekeying is done by the responder, the roles will be reversed: the
       responder for the old SA will be the initiator for the replacement. The former initiator
       might also initiate rekeying, so there may be redundant SAs created. To avoid these
       complications, make sure that rekeymargin is generous.

       One risk of having the former responder initiate is that perhaps none of its proposals is
       acceptable to the former initiator (they have not been used in a successful negotiation).
       To reduce the chances of this happening, and to prevent loss of security, the policy
       settings are taken from the old SA (this is the case even if the former initiator is
       initiating). These may be stricter than those of the connection.

       pluto will not rekey an SA if that SA is not the most recent of its type (IPsec or ISAKMP)
       for its potential connection. This avoids creating redundant SAs.

       The random component in the rekeying time (rekeyfuzz) is intended to make certain
       pathological patterns of rekeying unstable. If both sides decide to rekey at the same
       time, twice as many SAs as necessary are created. This could become a stable pattern
       without the randomness.

       Another more important case occurs when a security gateway has SAs with many other
       security gateways. Each of these connections might need to be rekeyed at the same time.
       This would cause a high peek requirement for resources (network bandwidth, CPU time,
       entropy for random numbers). The rekeyfuzz can be used to stagger the rekeying times.

       Once a new set of SAs has been negotiated, pluto will never send traffic on a superseded
       one. Traffic will be accepted on an old SA until it expires.

   Selecting a Connection When Responding: Road Warrior Support
       When pluto receives an initial Main Mode message, it needs to decide which connection this
       message is for. It picks based solely on the source and destination IP addresses of the
       message. There might be several connections with suitable IP addresses, in which case one
       of them is arbitrarily chosen. (The ISAKMP SA proposal contained in the message could be
       taken into account, but it is not.)

       The ISAKMP SA is negotiated before the parties pass further identifying information, so
       all ISAKMP SA characteristics specified in the connection description should be the same
       for every connection with the same two host IP addresses. At the moment, the only
       characteristic that might differ is authentication method.

       Up to this point, all configuring has presumed that the IP addresses are known to all
       parties ahead of time. This will not work when either end is mobile (or assigned a dynamic
       IP address for other reasons). We call this situation "Road Warrior". It is fairly tricky
       and has some important limitations, most of which are features of the IKE protocol.

       Only the initiator may be mobile: the initiator may have an IP number unknown to the
       responder. When the responder doesn't recognize the IP address on the first Main Mode
       packet, it looks for a connection with itself as one end and %any as the other. If it
       cannot find one, it refuses to negotiate. If it does find one, it creates a temporary
       connection that is a duplicate except with the %any replaced by the source IP address from
       the packet; if there was no identity specified for the peer, the new IP address will be
       used.

       When pluto is using one of these temporary connections and needs to find the preshared
       secret or RSA private key in ipsec.secrets, and and the connection specified no identity
       for the peer, %any is used as its identity. After all, the real IP address was apparently
       unknown to the configuration, so it is unreasonable to require that it be used in this
       table.

       Part way into the Phase 1 (Main Mode) negotiation using one of these temporary connection
       descriptions, pluto will be receive an Identity Payload. At this point, pluto checks for a
       more appropriate connection, one with an identity for the peer that matches the payload
       but which would use the same keys so-far used for authentication. If it finds one, it will
       switch to using this better connection (or a temporary derived from this, if it has %any
       for the peer's IP address). It may even turn out that no connection matches the newly
       discovered identity, including the current connection; if so, pluto terminates
       negotiation.

       Unfortunately, if preshared secret authentication is being used, the Identity Payload is
       encrypted using this secret, so the secret must be selected by the responder without
       knowing this payload. This limits there to being at most one preshared secret for all Road
       Warrior systems connecting to a host. RSA Signature authentications does not require that
       the responder know how to select the initiator's public key until after the initiator's
       Identity Payload is decoded (using the responder's private key, so that must be
       preselected).

       When pluto is responding to a Quick Mode negotiation via one of these temporary connection
       descriptions, it may well find that the subnets specified by the initiator don't match
       those in the temporary connection description. If so, it will look for a connection with
       matching subnets, its own host address, a peer address of %any and matching identities. If
       it finds one, a new temporary connection is derived from this one and used for the Quick
       Mode negotiation of IPsec SAs. If it does not find one, pluto terminates negotiation.

       Be sure to specify an appropriate nexthop for the responder to send a message to the
       initiator: pluto has no way of guessing it (if forwarding isn't required, use an explicit
       %direct as the nexthop and the IP address of the initiator will be filled in; the obsolete
       notation 0.0.0.0 is still accepted).

       pluto has no special provision for the initiator side. The current (possibly dynamic) IP
       address and nexthop must be used in defining connections. These must be properly
       configured each time the initiator's IP address changes.  pluto has no mechanism to do
       this automatically.

       Although we call this Road Warrior Support, it could also be used to support encrypted
       connections with anonymous initiators. The responder's organization could announce the
       preshared secret that would be used with unrecognized initiators and let anyone connect.
       Of course the initiator's identity would not be authenticated.

       If any Road Warrior connections are supported, pluto cannot reject an exchange initiated
       by an unknown host until it has determined that the secret is not shared or the signature
       is invalid. This must await the third Main Mode message from the initiator. If no Road
       Warrior connection is supported, the first message from an unknown source would be
       rejected. This has implications for ease of debugging configurations and for denial of
       service attacks.

       Although a Road Warrior connection must be initiated by the mobile side, the other side
       can and will rekey using the temporary connection it has created. If the Road Warrior
       wishes to be able to disconnect, it is probably wise to set --keyingtries to 1 in the
       connection on the non-mobile side to prevent it trying to rekey the connection.
       Unfortunately, there is no mechanism to unroute the connection automatically.

   Debugging
       pluto accepts several optional arguments, useful mostly for debugging. Except for
       --interface, each should appear at most once.

       --interface interfacename
           specifies that the named real public network interface should be considered. The
           interface name specified should not be ipsecN. If the option doesn't appear, all
           interfaces are considered. To specify several interfaces, use the option once for
           each. One use of this option is to specify which interface should be used when two or
           more share the same IP address.

       --ikeport port-number
           changes the UDP port that pluto will use (default, specified by IANA: 500)

       --ctlbase path
           basename for control files.  path.ctl is the socket through which whack communicates
           with pluto.  path.pid is the lockfile to prevent multiple pluto instances. The default
           is /var/run/pluto/pluto).

       --secretsfile file
           specifies the file for authentication secrets (default: /etc/ipsec.secrets). This name
           is subject to "globbing" as in sh(1), so every file with a matching name is processed.
           Quoting is generally needed to prevent the shell from doing the globbing.

       --nofork
           disable "daemon fork" (default is to fork). In addition, after the lock file and
           control socket are created, print the line "Pluto initialized" to standard out.

       --uniqueids
           if this option has been selected, whenever a new ISAKMP SA is established, any
           connection with the same Peer ID but a different Peer IP address is unoriented
           (causing all its SAs to be deleted). This helps clean up dangling SAs when a
           connection is lost and then regained at another IP address.

       --force-busy
           if this option has been selected, pluto will be forced to be "busy". In this state,
           which happens when there is a Denial of Service attack, will force pluto to use
           cookies before accepting new incoming IKE packets. Cookies are send and required in
           ikev1 Aggressive Mode and in ikev2. This option is mostly used for testing purposes,
           but can be selected by paranoid administrators as well.

       --stderrlog
           log goes to standard out {default is to use syslogd(8))

       For example

       pluto --secretsfile ipsec.secrets --ctlbase pluto.base --ikeport 8500 --nofork
       --use-nostack --stderrlog

       lets one test pluto without using the superuser account.

       pluto is willing to produce a prodigious amount of debugging information. There are
       several classes of debugging output, and pluto may be directed to produce a selection of
       them. All lines of debugging output are prefixed with "| " to distinguish them from normal
       diagnostic messages.

       When pluto is invoked, it may be given arguments to specify which debug classes to output.
       The current options are:

       --debug all
           enable logging of a standard set of debugging classes (this does not include debugging
           classes that may expose private information)

       --debug none
           disable logging for all debugging classes

       --debug list (whack only)
           list the debugging classes recognised by pluto

       --debug class, --debug no-class
           enable (disable) logging of the specified debugging class, class is one of:

           private
               control logging of private information (this class is not included in all)

           use --debug list to list additional debugging classes recognized by pluto

       --debug-all (obsolete)
           alias for --debug all --impair none

       --debug-none (obsolete)
           alias for --debug none --impair none

       The debug form of the whack command will change the selection in a running pluto. If a
       connection name is specified, the flags are added whenever pluto has identified that it is
       dealing with that connection. Unfortunately, this is often part way into the operation
       being observed.

       For example, to start a pluto with a display of the structure of input and output:

       pluto --debug xauth --debug retransmits

       To later change this pluto to disable the retransmits debug class use either of:

       whack --debug no-retransmits

       whack --debug none --debug xauth

   Impairing
       pluto and whack accept several optional arguments that alter (impair) correct behaviour.

       These options are solely intended for use by developers when testing pluto.

       --impair list (whack only)
           list all the behaviours that can be altered (impaired)

       --impair none
           disable all altered (impaired) behaviours

       --impair behaviour, --impair no-behaviour
           alter (impair) pluto inducing the (possibly erroneous) behaviour

   Pluto's Behaviour When Things Go Wrong
       When pluto doesn't understand or accept a message, it just ignores the message. It is not
       yet capable of communicating the problem to the other IKE daemon (in the future it might
       use Notifications to accomplish this in many cases). It does log a diagnostic.

       When pluto gets no response from a message, it resends the same message (a message will be
       sent at most three times). This is appropriate: UDP is unreliable.

       When pluto gets a message that it has already seen, there are many cases when it notices
       and discards it. This too is appropriate for UDP.

       Combine these three rules, and you can explain many apparently mysterious behaviours. In a
       pluto log, retrying isn't usually the interesting event. The critical thing is either
       earlier (pluto got a message which it didn't like and so ignored, so it was still awaiting
       an acceptable message and got impatient) or on the other system (pluto didn't send a reply
       because it wasn't happy with the previous message).

   Notes
       If pluto is compiled without -DKLIPS, it negotiates Security Associations but never ask
       the kernel to put them in place and never makes routing changes. This allows pluto to be
       tested on systems without KLIPS, but makes it rather useless.

       Each IPsec SA is assigned an SPI, a 32-bit number used to refer to the SA. The IKE
       protocol lets the destination of the SA choose the SPI. The range 0 to 0xFF is reserved
       for IANA.  Pluto also avoids choosing an SPI in the range 0x100 to 0xFFF, leaving these
       SPIs free for manual keying. Remember that the peer, if not pluto, may well chose SPIs in
       this range.

   Policies
       This catalogue of policies may be of use when trying to configure Pluto and another IKE
       implementation to interoperate.

       In Phase 1, only Main Mode is supported. We are not sure that Aggressive Mode is secure.
       For one thing, it does not support identity protection. It may allow more severe Denial Of
       Service attacks.

       No Informational Exchanges are supported. These are optional and since their delivery is
       not assured, they must not matter. It is the case that some IKE implementations won't
       interoperate without Informational Exchanges, but we feel they are broken.

       No Informational Payloads are supported. These are optional, but useful. It is of concern
       that these payloads are not authenticated in Phase 1, nor in those Phase 2 messages
       authenticated with HASH(3).

       •
           Diffie Hellman Groups MODP 1024 and MODP 1536 (2 and 5) are supported. Group MODP768
           (1) is not supported because it is too weak.

       •
           Host authentication can be done by RSA Signatures or Pre-Shared Secrets.

       •
           3DES CBC (Cypher Block Chaining mode) is the only encryption supported, both for
           ISAKMP SAs and IPSEC SAs.

       •
           MD5 and SHA1 hashing are supported for packet authentication in both kinds of SAs.

       •
           The ESP, AH, or AH plus ESP are supported. If, and only if, AH and ESP are combined,
           the ESP need not have its own authentication component. The selection is controlled by
           the --encrypt and --authenticate flags.

       •
           Each of these may be combined with IPCOMP Deflate compression, but only if the
           potential connection specifies compression and only if KLIPS is configured with IPCOMP
           support.

       •
           The IPSEC SAs may be tunnel or transport mode, where appropriate. The --tunnel flag
           controls this when pluto is initiating.

       •
           When responding to an ISAKMP SA proposal, the maximum acceptable lifetime is eight
           hours. The default is one hour. There is no minimum. The --ikelifetime flag controls
           this when pluto is initiating.

       •
           When responding to an IPSEC SA proposal, the maximum acceptable lifetime is one day.
           The default is eight hours. There is no minimum. The --ipseclifetime flag controls
           this when pluto is initiating.

       •
           PFS is acceptable, and will be proposed if the --pfs flag was specified. The DH group
           proposed will be the same as negotiated for Phase 1.

SIGNALS

       Pluto responds to SIGHUP by issuing a suggestion that ``whack --listen'' might have been
       intended.

       Pluto exits when it receives SIGTERM.

EXIT STATUS

       pluto normally forks a daemon process, so the exit status is normally a very preliminary
       result.

       0
           means that all is OK so far.

       1
           means that something was wrong.

       10
           means that the lock file already exists.

       If whack detects a problem, it will return an exit status of 1. If it received progress
       messages from pluto, it returns as status the value of the numeric prefix from the last
       such message that was not a message sent to syslog or a comment (but the prefix for
       success is treated as 0). Otherwise, the exit status is 0.

FILES

       /var/run/pluto/pluto.pid

       /var/run/pluto/pluto.ctl

       /etc/ipsec.secrets

       /dev/urandom

ENVIRONMENT

       pluto does not use any environment variables

SEE ALSO

       The rest of the Libreswan distribution, in particular ipsec(8).

       ipsec_auto(8) is designed to make using pluto more pleasant. Use it!

       ipsec.secrets(5) describes the format of the secrets file.

       ipsec_atoaddr(3), part of the Libreswan distribution, describes the forms that IP
       addresses may take.  ipsec_atosubnet(3), part of the Libreswan distribution, describes the
       forms that subnet specifications.

       For more information on IPsec, the mailing list, and the relevant documents, see:

       https://datatracker.ietf.org/wg/ipsecme/charter/

       At the time of writing, the most relevant IETF RFCs are:

       RFC5996 Internet Key Exchange Protocol Version 2 (IKEv2)

       The Libreswan web site <https://libreswan.org> and the mailing lists described there.

HISTORY

       This code is released under the GPL terms. See the accompanying files COPYING and
       CREDITS.* for more details.

       This software was originally written for the FreeS/WAN project <http://www.freeswan.org>,
       founded by John Gilmore and managed by Hugh Daniel. It was written by Angelos D. Keromytis
       (angelos@dsl.cis.upenn.edu), in May/June 1997, in Athens, Greece. Thanks go to John
       Ioannidis for his help.

       FreeS/WAN's Pluto was developed/maintained from 2000-2004 by D. Hugh Redelmeier
       (hugh@mimosa.com), in Canada. The regulations of Greece and Canada allow the code to be
       freely redistributable.

       Richard Guy Briggs <rgb@conscoop.ottawa.on.ca> was the main resource on KLIPS development

       IKE version 2 was initially written by Michael Richardson, Antony Antony and Paul Wouters.
       It has since been extended by Avesh Agarwal, D. Hugh Redelmeier, Matt Rogers, Antony
       Antony and Paul Wouters.

       From 2003 onwards, the code was developed and maintained by The Openswan Project by
       developers worldwide and distributed from The Netherland and Finland. Due to a lawsuit by
       Xelerance over the trademark, the project was forced to rename itself and the code to The
       Libreswan Project in 2012.

       See further: the CHANGES/CREDITS files in the main directory and the doc/ directory.

BUGS

       Please see <https://bugs.libreswan.org> for a list of currently known bugs and missing
       features.

       Bugs should be reported to the <swan-dev@lists.libreswan.org> mailing list.

AUTHOR

       Paul Wouters
           placeholder to suppress warning