Provided by: casync_2+61.20180112-1_amd64 
NAME
casync - casync Documentation
SYNOPSIS
casync [OPTIONS...] make [ARCHIVE | ARCHIVE_INDEX | BLOB_INDEX] [PATH]
casync [OPTIONS...] extract [ARCHIVE | ARCHIVE_INDEX | BLOB_INDEX] [PATH]
casync [OPTIONS...] list [ARCHIVE | ARCHIVE_INDEX | DIRECTORY]
casync [OPTIONS...] mtree [ARCHIVE | ARCHIVE_INDEX | DIRECTORY]
casync [OPTIONS...] stat [ARCHIVE | ARCHIVE_INDEX | DIRECTORY] [PATH]
casync [OPTIONS...] digest [ARCHIVE | BLOB | ARCHIVE_INDEX | BLOB_INDEX | DIRECTORY]
casync [OPTIONS...] mount [ARCHIVE | ARCHIVE_INDEX] PATH
casync [OPTIONS...] mkdev [BLOB | BLOB_INDEX] [NODE]
casync [OPTIONS...] gc BLOB_INDEX | ARCHIVE_INDEX ...
DESCRIPTION
Content-Addressable Data Synchronization Tool
COMMANDS
casync make [ARCHIVE | ARCHIVE_INDEX] [DIRECTORY]
casync make [BLOB_INDEX] FILE | DEVICE
This will create either a .catar archive or an .caidx index for for the given DIRECTORY,
or a .caibx index for the given FILE or block DEVICE. The type of output is automatically
chosen based on the file extension (this may be overridden with --what=). DIRECTORY is
optional, and the current directory will be used if not specified.
When a .caidx or .caibx file is created, a .castr storage directory will be created too,
by default located in the same directory, and named default.castr unless configured
otherwise (see --store= option).
The metadata included in the archive is controlled by the --with-* and --without-*
options.
casync extract [ARCHIVE | ARCHIVE_INDEX] [DIRECTORY]
casync extract BLOB_INDEX FILE | DEVICE
This will extract the contents of a .catar archive or .caidx index into the specified
DIRECTORY, or the contents specified by BLOB_INDEX to the specified FILE or block DEVICE.
DIRECTORY may be omitted, and the current directory will be used by default.
The metadata replayed from the archive is controlled by the --with-* and --without-*
options.
casync list [ARCHIVE | ARCHIVE_INDEX | DIRECTORY]
This will list all the files and directories in the specified .catar archive or .caidx
index, or the directory. The argument is optional, and the current directory will be used
by default.
The output includes the permission mask and file names:
$ casync list /usr/share/doc/casync
drwxr-xr-x
-rw-r--r-- README.md
-rw-r--r-- TODO
casync mtree [ARCHIVE | ARCHIVE_INDEX | DIRECTORY]
This is similar to list, but includes information about each entry in the key=value format
defined by BSD mtree(5):
$ casync mtree /usr/share/doc/casync
. type=dir mode=0755 uid=0 gid=0 time=1500343585.721189650
README.md type=file mode=0644 size=7286 uid=0 gid=0 time=1498175562.000000000 sha256digest=af75eacac1f00abf6adaa7510a2c7fe00a4636daf9ea910d69d96f0a4ae85df4
TODO type=file mode=0644 size=2395 uid=0 gid=0 time=1498175562.000000000 sha256digest=316f11a03c08ec39f0328ab1f7446bd048507d3fbeafffe7c32fad4942244b7d
casync stat [ARCHIVE | ARCHIVE_INDEX | DIRECTORY] [PATH]
This will show detailed information about a file or directory PATH, as found in either
ARCHIVE or ARCHIVE_INDEX or underneath DIRECTORY. Both arguments are optional. The first
defaults to the current directory, and the second the top-level path (.).
Example output:
$ casync stat .
File: .
Mode: drwxrwxr-x
FileAttr: ----------
FATAttr: ---
Offset: 0
Time: 2017-07-17 22:53:30.723304050
User: zbyszek (1000)
Group: zbyszek (1000)
casync digest [ARCHIVE | BLOB | ARCHIVE_INDEX | BLOB_INDEX | DIRECTORY]
This will compute and print the checksum of the argument. The argument is optional and
defaults to the current directory:
$ casync digest
d1698b0c4c27163284abea5d1e369b92e89dd07cb74378638849800e0406baf7
$ casync digest .
d1698b0c4c27163284abea5d1e369b92e89dd07cb74378638849800e0406baf7
casync mount [ARCHIVE | ARCHIVE_INDEX] PATH
This will mount the specified .catar archive or .caidx index at the specified PATH, using
the FUSE protocol.
casync mkdev [BLOB | BLOB_INDEX] [NODE]
This will create a block device NODE with the contents specified by the .caibx BLOB_INDEX
or just the file or block device BLOB, using the NBD protocol.
Example:
$ sudo casync -v mkdev README.md
Attached: /dev/nbd0
(in another terminal)
$ sudo head -n1 /dev/nbd0
# casync — Content Addressable Data Synchronizer
When casync mkdev is killed, the device is destroyed.
casync gc ARCHIVE_INDEX | BLOB_INDEX ...
This will remove all chunks that are not used by one of the specified indices (one or more
blob and archive indices can be given). If --store is not given, the default store for the
first index will be used.
This command can be used to prune unused chunks from a shared chunk store.
OPTIONS
General options:
--help, -h
Show terse help output
--verbose, -v
Show terse status information during runtime
--dry-run, -n
Only print what would be removed with gc
--store=PATH
The primary chunk store to use
--extra-store=<PATH>
Additional chunk store to look for chunks in
--chunk-size=<[MIN:]AVG[:MAX]>
The minimal/average/maximum number of bytes in a chunk
--digest=<DIGEST>
Pick digest algorithm (sha512-256 or sha256)
--compression=<COMPRESSION>
Pick compression algorithm (zstd, xz or gzip)
--seed=<PATH>
Additional file or directory to use as seed
--rate-limit-bps=<LIMIT>
Maximum bandwidth in bytes/s for remote communication
--exclude-nodump=no
Don't exclude files with chattr(1)'s +d nodump flag when creating archive
--exclude-submounts=yes
Exclude submounts when creating archive
--reflink=no
Don't create reflinks from seeds when extracting
--hardlink=yes
Create hardlinks from seeds when extracting
--punch-holes=no
Don't create sparse files when extracting
--delete=no
Don't delete existing files not listed in archive after extraction
--undo-immutable=yes
When removing existing files, undo chattr(1)'s +i 'immutable' flag when extracting
--seed-output=no
Don't implicitly add pre-existing output as seed when extracting
--recursive=no
List non-recursively
--uid-shift=<yes|SHIFT>
Shift UIDs/GIDs
--uid-range=<RANGE>
Restrict UIDs/GIDs to range
Input/output selector:
--what=archive
Operate on archive file
--what=archive-index
Operate on archive index file
--what=blob
Operate on blob file
--what=blob-index
Operate on blob index file
--what=directory
Operate on directory
--what=help
Print a list of allowed values (and terminate the program)
Turn on archive feature sets:
--with=best
Store most accurate information
--with=unix
Store UNIX baseline information
--with=fat
Store FAT information
--with=chattr
Store chattr(1) file attributes
--with=fat-attrs
Store FAT file attributes
--with=privileged
Store file data that requires privileges to restore
--with=fuse
Store file data that can exposed again via 'casync mount'
To turn archive features off, --without=… may be used, such as --without=fat-attrs,
--without=privileged, etc. To disable all optional features, --without=all may be used.
(The positive form --with=all does not make sense, because some features are conflicting.
To enable the maximum set of information, use --with=best.)
Individual archive features:
--with=<16bit-uids>
Store reduced 16bit UID/GID information
--with=<32bit-uids>
Store full 32bit UID/GID information
--with=<user-names>
Store user/group names
--with=<sec-time>
Store timestamps in 1s granularity
--with=<usec-time>
Store timestamps in 1µs granularity
--with=<nsec-time>
Store timestamps in 1ns granularity
--with=<2sec-time>
Store timestamps in 2s granularity
--with=<read-only>
Store per-file read only flag
--with=<permissions>
Store full per-file UNIX permissions
--with=<symlinks>
Store symbolic links
--with=<device-nodes>
Store block and character device nodes
--with=<fifos>
Store named pipe nodes
--with=<sockets>
Store AF_UNIX file system socket nodes
--with=<flag-hidden>
Store FAT "hidden" file flag
--with=<flag-system>
Store FAT "system" file flag
--with=<flag-archive>
Store FAT "archive" file flag
--with=<flag-append>
Store "append-only" file flag
--with=<flag-noatime>
Store "disable access time" file flag
--with=<flag-compr>
Store "enable compression" file flag
--with=<flag-nocow>
Store "disable copy-on-write" file flag
--with=<flag-nodump>
Store "disable dumping" file flag
--with=<flag-dirsync>
Store "synchronous" directory flag
--with=<flag-immutable>
Store "immutable" file flag
--with=<flag-sync>
Store "synchronous" file flag
--with=<flag-nocomp>
Store "disable compression" file flag
--with=<flag-projinherit>
Store "project quota inheritance" flag
--with=<subvolume>
Store btrfs subvolume information
--with=<subvolume-ro>
Store btrfs subvolume read-only property
--with=<xattrs>
Store extended file attributes
--with=<acl>
Store file access control lists
--with=<selinux>
Store SElinux file labels
--with=<fcaps>
Store file capabilities
(and similar: --without=16bit-uids, --without=32bit-uids, ...)
ARCHIVE FEATURES
The various --with= and --without= parameters control the precise set of metadata to store
in the archive, or restore when extracting. These flags only apply if casync operates on
the file system level.