Ubuntu Manpage: mitmweb - a man-in-the-middle proxy with a web interface

NAME

       mitmweb - a man-in-the-middle proxy with a web interface

SYNOPSIS

       mitmweb [options]

DESCRIPTION

       mitmweb provides a web interface to mitmproxy.

OPTIONS

Optional Arguments:
-h, --help
Show this help message and exit.

--conf CONFIG_FILE
Config file path.

--version
Show program's version number and exit.

--sysinfo
Show system info and exit.

--shortversion
Show program's short version number and exit.

--anticache
Strip out request headers that might cause the server to return 304-not-modified.

--cadir CA_DIR
Location of the default mitmproxy CA files. (Default: ~/.mitmproxy)

--host Use the Host header to construct URLs for display.

-q, --quiet
Quiet.

-r RFILE, --read-flows RFILE
Read flows from file.

-s script.py --bar , --script script.py --bar
Run a script. Surround with quotes to pass script arguments. Can be passed
multiple times.

-t FILTER, --stickycookie FILTER
Set sticky cookie filter. Matched against requests.

-u FILTER, --stickyauth FILTER
Set sticky auth filter. Matched against requests.

-v, --verbose
Increase log verbosity.

-w OUTFILE, --wfile OUTFILE
Write flows to file.

-a OUTFILE, --afile OUTFILE
Append flows to file.

-z, --anticomp
Try to convince servers to send us un-compressed data.

-Z SIZE, --body-size-limit SIZE
Byte size limit of HTTP request and response bodies. Understands k/m/g suffixes,
e.g. 3m for 3 megabytes.

--stream SIZE
Stream data to the client if response body exceeds the given threshold. If
streamed, the body will not be stored in any way. Understands k/m/g suffixes, e.g.
3m for 3 megabytes.

--upstream-auth UPSTREAM_AUTH
Proxy Authentication: username:password

Mitmweb:
--wport PORT
Mitmweb port.

--wiface IFACE
Mitmweb interface.

--wdebug
Turn on mitmweb debugging.

--wsingleuser USER
Allows access to a single user, specified in the form username:password.

--whtpasswd PATH
Allow access to users specified in an Apache htpasswd file.

Proxy Modes:
-R REVERSE_PROXY, --reverse REVERSE_PROXY
Forward all requests to upstream HTTP server: http[s]://host[:port]. Clients can
always connect both via HTTPS and HTTP, the connection to the server is determined
by the specified scheme.

--socks
Set SOCKS5 proxy mode.

-T, --transparent
Set transparent proxy mode.

-U UPSTREAM_PROXY, --upstream UPSTREAM_PROXY
Forward all requests to upstream proxy server: http://host[:port]

Proxy Options:
-b ADDR, --bind-address ADDR
Address to bind proxy to (defaults to all interfaces).

-I HOST, --ignore HOST
Ignore host and forward all traffic without processing it. In transparent mode, it
is recommended to use an IP address (range), not the hostname. In regular mode,
only SSL traffic is ignored and the hostname should be used. The supplied value is
interpreted as a regular expression and matched on the ip or the hostname. Can be
passed multiple times.

--tcp HOST
Generic TCP SSL proxy mode for all hosts that match the pattern. Similar to
--ignore, but SSL connections are intercepted. The communication contents are
printed to the log in verbose mode.

-n, --no-server
Don't start a proxy server.

-p PORT, --port PORT
Proxy service port.

--no-http2
Explicitly disable HTTP/2 support. If your OpenSSL version supports ALPN, HTTP/2
is enabled by default.

--raw-tcp | --no-raw-tcp
Explicitly enable/disable experimental raw tcp support. Disabled by default.
Default value will change in a future version.

--websockets | --no-websockets
Explicitly enable/disable experimental WebSocket support. Disabled by default as
messages are only printed to the event log and not retained. Default value will
change in a future version.

--spoof-source-address
Use the client's IP for server-side connections.

SSL:
--cert SPEC
Add an SSL certificate. SPEC is of the form "[domain=]path". The domain may
include a wildcard, and is equal to "*" if not specified. The file at path is a
certificate in PEM format. If a private key is included in the PEM, it is used,
otherwise the default key in the conf dir is used. The PEM file should contain the
full certificate chain, with the leaf certificate as the first entry. Can be
passed multiple times.

--ciphers-client CIPHERS_CLIENT
Set supported ciphers for client connections. (OpenSSL Syntax)

--ciphers-server CIPHERS_SERVER
Set supported ciphers for server connections. (OpenSSL Syntax)

--client-certs CLIENT_CERTS
Client certificate file or directory.

--no-upstream-cert
Don't connect to upstream server to look up certificate details.

--add-upstream-certs-to-client-chain
Add all certificates of the upstream server to the certificate chain that will be
served to the proxy client, as extras.

--insecure
Do not verify upstream server SSL/TLS certificates.

--upstream-trusted-cadir CA_DIR
Path to a directory of trusted CA certificates for upstream server verification
prepared using the c_rehash tool.

--upstream-trusted-ca CA_CERT
Path to a PEM formatted trusted CA certificate.

--ssl-version-client {all|TLSv1_2|secure|TLSv1_1|TLSv1|SSLv3|SSLv2}
Set supported SSL/TLS versions for client connections. SSLv2, SSLv3 and all are
INSECURE. Defaults to secure, which is TLS1.0+.

--ssl-version-server {all|TLSv1_2|secure|TLSv1_1|TLSv1|SSLv3|SSLv2}
Set supported SSL/TLS versions for server connections. SSLv2, SSLv3 and all are
INSECURE. Defaults to secure, which is TLS1.0+.

Onboarding App:
--noapp
Disable the mitmproxy onboarding app.

--app-host HOST
Domain to serve the onboarding app from. For transparent mode, use an IP when a
DNS entry for the app domain is not present. (Default: mitm.it)

--app-port PORT
Port to serve the onboarding app from. (Default: 80)

Client Replay:
-c PATH, --client-replay PATH
Replay client requests from a saved file.

Server Replay:
-S PATH, --server-replay PATH
Replay server responses from a saved file.

-k, --replay-kill-extra
Kill extra requests during replay.

--server-replay-use-header HEADER
Request header to be considered during replay. Can be passed multiple times.

--norefresh
Disable response refresh, which updates times in cookies and headers for replayed
responses.

--no-pop
Disable response pop from response flow. This makes it possible to replay same
response multiple times.

--replay-ignore-content
Ignore request's content while searching for a saved flow to replay.

--replay-ignore-payload-param PARAM
Request's payload parameter (application/x-www-form-urlencoded or
multipart/form-data) to be ignored while searching for a saved flow to replay. Can
be passed multiple times.

--replay-ignore-param PARAM
Request's parameter to be ignored while searching for a saved flow to replay. Can
be passed multiple times.

--replay-ignore-host
Ignore request's destination host while searching for a saved flow to replay.

Replacements:
Replacements are of the form "/pattern/regex/replacement", where the separator can be any
character. Please see the documentation for more information.

--replace PATTERN
Replacement pattern.

--replace-from-file PATH
Replacement pattern, where the replacement clause is a path to a file.

Set Headers:
Header specifications are of the form "/pattern/header/value", where the separator can be
any character. Please see the documentation for more information.

--setheader PATTERN
Header set pattern.

Proxy Authentication:
Specify which users are allowed to access the proxy and the method used for authenticating
them.

--nonanonymous
Allow access to any user long as a credentials are specified.

--singleuser USER
Allows access to a a single user, specified in the form username:password.

--htpasswd PATH
Allow access to users specified in an Apache htpasswd file.

Filters:
See help in mitmproxy for filter expression syntax.

-i INTERCEPT, --intercept INTERCEPT
Intercept filter expression.

FILES

       ~/.mitmproxy/mitmweb.conf
              Settings for mitmweb.  This file can contain any options supported by mitmweb.

       ~/.mitmproxy/common.conf
              Settings  shared  between  all  command-line  tools.   Settings  in  this  file are
              overridden by those in the tool-specific files.  Only options shared  by  mitmproxy
              and mitmdump should be used in this file.

       Options   that  start  with  --  (e.g.   --wport)  can  also  be  set  in  a  config  file
       (~/.mitmproxy/common.conf or ~/.mitmproxy/mitmweb.conf or specified via  --conf).   Config
       file syntax allows:

              key=value, flag=true, stuff=[a,b,c]

       (for  details,  see syntax at <https://goo.gl/R74nmi>).  If an option is specified in more
       than one place, then command-line  values  override  config  file  values  which  override
       defaults.

AUTHORS

       mitmweb was written by Aldo Cortesi.

       This  manual  page  was  written for the Debian GNU/Linux system, but its use elsewhere is
       encouraged.

                                          November 2016                                MITMWEB(1)