Provided by: syncthing-discosrv_0.14.43+ds1-6_amd64 
NAME
stdiscosrv - Syncthing Discovery Server
SYNOPSIS
stdiscosrv [-cert=<file>] [-db-backend=<string>] [-db-dsn=<string>] [-debug] [-http] [-key=<string>]
[-limit-avg=<int>] [-limit-burst=<int>] [-limit-cache=<int>] [-listen=<address>]
[-stats-file=<file>]
DESCRIPTION
Syncthing relies on a discovery server to find peers on the internet. Anyone can run a
discovery server and point Syncthing installations to it.
OPTIONS
-cert=<file>
Certificate file (default “cert.pem”).
-db-backend=<string>
Database backend to use (default “ql”).
-db-dsn=<string>
Database DSN (default “memory://stdiscosrv”).
-debug Enable debug output.
-http Listen on HTTP (behind an HTTPS proxy).
-key=<file>
Key file (default “key.pem”).
-limit-avg=<int>
Allowed average package rate, per 10 s (default 5).
-limit-burst=<int>
Allowed burst size, packets (default 20).
-limit-cache=<int>
Limiter cache entries (default 10240).
-listen=<address>
Listen address (default “:8443”).
-stats-file=<file>
File to write periodic operation stats to.
POINTING SYNCTHING AT YOUR DISCOVERY SERVER
By default, Syncthing uses a number of global discovery servers, signified by the entry
default in the list of discovery servers. To make Syncthing use your own instance of
stdiscosrv, open up Syncthing’s web GUI. Go to settings, Global Discovery Server and add
stdiscosrv’s host address to the comma-separated list, e.g.
https://disco.example.com:8443/v2/. Note that stdiscosrv uses port 8443 by default. For
stdiscosrv to be available over the internet with a dynamic IP address, you will need a
dynamic DNS service.
If you wish to use only your own discovery server, remove the default entry from the list.
SETTING UP
Description
This guide assumes that you have already set up Syncthing. If you haven’t yet, head over
to getting-started first.
Installing
Go to releases <https://build.syncthing.net/job/stdiscosrv> and download the file
appropriate for your operating system. Unpacking it will yield a binary called stdiscosrv
(or stdiscosrv.exe on Windows). Start this in whatever way you are most comfortable with;
double clicking should work in any graphical environment. At first start, stdiscosrv will
generate the directory /var/stdiscosrv (X:\var\stdiscosrv on Windows, where X is the
partition stdiscosrv.exe is executed from) with configuration. If the user running
stdiscosrv doesn’t have permission to do so, create the directory and set the owner
appropriately or use the command line switches (see below) to select a different location.
Configuring
NOTE:
If you are running an instance of Syncthing on the discovery server, you must either
add that instance to other devices using a static address or bind the discovery server
and Syncthing instances to different IP addresses.
Certificates
The discovery server provides service over HTTPS. To ensure secure connections from
clients there are three options:
• Use a CA-signed certificate pair for the domain name you will use for the discovery
server. This is like any other HTTPS website; clients will authenticate the server based
on it’s certificate and domain name.
• Use any certificate pair and let clients authenticate the server based on it’s “device
ID” (similar to Syncthing-to-Syncthing authentication). In this case, using syncthing
-generate is a good option to create a certificate pair.
• Pass the -http flag if the discovery server is behind an SSL-secured reverse proxy. See
below for configuration.
For the first two options, the discovery server must be given the paths to the certificate
and key at startup. This isn’t necessary with the http flag:
$ stdiscosrv -cert /path/to/cert.pem -key /path/to/key.pem
Server device ID is 7DDRT7J-UICR4PM-PBIZYL3-MZOJ7X7-EX56JP6-IK6HHMW-S7EK32W-G3EUPQA
The discovery server prints it’s device ID at startup. In the case where you are using a
non CA signed certificate, this device ID (fingerprint) must be given to the clients in
the discovery server URL:
https://disco.example.com:8443/v2/?id=7DDRT7J-UICR4PM-PBIZYL3-MZOJ7X7-EX56JP6-IK6HHMW-S7EK32W-G3EUPQA
Otherwise, the URL (note the trailing slash after the v2) will be:
https://disco.example.com:8443/v2/
Reverse Proxy Setup
The discovery server can be run behind an SSL-secured reverse proxy. This allows:
• Use of a subdomain name without requiring a port number added to the URL
• Sharing an SSL certificate with multiple services on the same server
Requirements
• Run the discovery server using the -http flag stdiscosrv -http.
• SSL certificate/key configured for the reverse proxy
• The “X-Forwarded-For” http header must be passed through with the client’s real IP
address
• The “X-SSL-Cert” must be passed through with the PEM-encoded client SSL certificate
• The proxy must request the client SSL certificate but not require it to be signed by a
trusted CA.
Nginx
These three lines in the configuration take care of the last three requirements listed
above:
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-SSL-Cert $ssl_client_cert;
ssl_verify_client optional_no_ca;
The following is a complete example Nginx configuration file. With this setup, clients can
use https://discovery.example.com as the discovery server URL in the Syncthing settings.
# HTTP 1.1 support
proxy_http_version 1.1;
proxy_buffering off;
proxy_set_header Host $http_host;
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection $proxy_connection;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Forwarded-Proto $proxy_x_forwarded_proto;
proxy_set_header X-SSL-Cert $ssl_client_cert;
upstream discovery.example.com {
# Local IP address:port for discovery server
server 192.0.2.1:8443;
}
server {
server_name discovery.example.com;
listen 80;
access_log /var/log/nginx/access.log vhost;
return 301 https://$host$request_uri;
}
server {
server_name discovery.example.com;
listen 443 ssl http2;
access_log /var/log/nginx/access.log vhost;
ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
ssl_ciphers ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384: DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:E CDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA25 6:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:AES128-GCM-SHA256:AES256-GCM-SHA3 84:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:AES:CAMELLIA:DES-CBC3-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!PSK:!aECDH:!EDH-DSS -DES-CBC3-SHA:!EDH-RSA-DES-CBC3-SHA:!KRB5-DES-CBC3-SHA;
ssl_prefer_server_ciphers on;
ssl_session_timeout 5m;
ssl_session_cache shared:SSL:50m;
ssl_certificate /etc/nginx/certs/discovery.example.com.crt;
ssl_certificate_key /etc/nginx/certs/discovery.example.com.key;
ssl_dhparam /etc/nginx/certs/discovery.example.com.dhparam.pem;
add_header Strict-Transport-Security "max-age=31536000";
ssl_verify_client optional_no_ca;
location / {
proxy_pass http://discovery.example.com;
}
}
An example of automating the SSL certificates and reverse-proxying the Discovery Server
and Syncthing using Nginx, Let’s Encrypt <https://letsencrypt.org/> and Docker can be
found here <https://forum.syncthing.net/t/docker-syncthing-and-syncthing-discovery-behind-
nginx-reverse-proxy-with-lets-encrypt/6880>.
SEE ALSO
syncthing-networking(7), syncthing-faq(7)
AUTHOR
The Syncthing Authors
COPYRIGHT
2015, The Syncthing Authors