Provided by: libmojolicious-perl_7.59+dfsg-1ubuntu1_all bug

NAME

       Mojo::Server::Prefork - Pre-forking non-blocking I/O HTTP and WebSocket server

SYNOPSIS

         use Mojo::Server::Prefork;

         my $prefork = Mojo::Server::Prefork->new(listen => ['http://*:8080']);
         $prefork->unsubscribe('request')->on(request => sub {
           my ($prefork, $tx) = @_;

           # Request
           my $method = $tx->req->method;
           my $path   = $tx->req->url->path;

           # Response
           $tx->res->code(200);
           $tx->res->headers->content_type('text/plain');
           $tx->res->body("$method request for $path!");

           # Resume transaction
           $tx->resume;
         });
         $prefork->run;

DESCRIPTION

       Mojo::Server::Prefork is a full featured, UNIX optimized, pre-forking non-blocking I/O
       HTTP and WebSocket server, built around the very well tested and reliable
       Mojo::Server::Daemon, with IPv6, TLS, SNI, UNIX domain socket, Comet (long polling), keep-
       alive and multiple event loop support. Note that the server uses signals for process
       management, so you should avoid modifying signal handlers in your applications.

       For better scalability (epoll, kqueue) and to provide non-blocking name resolution, SOCKS5
       as well as TLS support, the optional modules EV (4.0+), Net::DNS::Native (0.15+),
       IO::Socket::Socks (0.64+) and IO::Socket::SSL (1.84+) will be used automatically if
       possible. Individual features can also be disabled with the "MOJO_NO_NNR", "MOJO_NO_SOCKS"
       and "MOJO_NO_TLS" environment variables.

       See "DEPLOYMENT" in Mojolicious::Guides::Cookbook for more.

MANAGER SIGNALS

       The Mojo::Server::Prefork manager process can be controlled at runtime with the following
       signals.

   INT, TERM
       Shut down server immediately.

   QUIT
       Shut down server gracefully.

   TTIN
       Increase worker pool by one.

   TTOU
       Decrease worker pool by one.

WORKER SIGNALS

       Mojo::Server::Prefork worker processes can be controlled at runtime with the following
       signals.

   QUIT
       Stop worker gracefully.

EVENTS

       Mojo::Server::Prefork inherits all events from Mojo::Server::Daemon and can emit the
       following new ones.

   finish
         $prefork->on(finish => sub {
           my ($prefork, $graceful) = @_;
           ...
         });

       Emitted when the server shuts down.

         $prefork->on(finish => sub {
           my ($prefork, $graceful) = @_;
           say $graceful ? 'Graceful server shutdown' : 'Server shutdown';
         });

   heartbeat
         $prefork->on(heartbeat => sub {
           my ($prefork, $pid) = @_;
           ...
         });

       Emitted when a heartbeat message has been received from a worker.

         $prefork->on(heartbeat => sub {
           my ($prefork, $pid) = @_;
           say "Worker $pid has a heartbeat";
         });

   reap
         $prefork->on(reap => sub {
           my ($prefork, $pid) = @_;
           ...
         });

       Emitted when a child process exited.

         $prefork->on(reap => sub {
           my ($prefork, $pid) = @_;
           say "Worker $pid stopped";
         });

   spawn
         $prefork->on(spawn => sub {
           my ($prefork, $pid) = @_;
           ...
         });

       Emitted when a worker process is spawned.

         $prefork->on(spawn => sub {
           my ($prefork, $pid) = @_;
           say "Worker $pid started";
         });

   wait
         $prefork->on(wait => sub {
           my $prefork = shift;
           ...
         });

       Emitted when the manager starts waiting for new heartbeat messages.

         $prefork->on(wait => sub {
           my $prefork = shift;
           my $workers = $prefork->workers;
           say "Waiting for heartbeat messages from $workers workers";
         });

ATTRIBUTES

       Mojo::Server::Prefork inherits all attributes from Mojo::Server::Daemon and implements the
       following new ones.

   accepts
         my $accepts = $prefork->accepts;
         $prefork    = $prefork->accepts(100);

       Maximum number of connections a worker is allowed to accept, before stopping gracefully
       and then getting replaced with a newly started worker, passed along to "max_accepts" in
       Mojo::IOLoop, defaults to 10000. Setting the value to 0 will allow workers to accept new
       connections indefinitely. Note that up to half of this value can be subtracted randomly to
       improve load balancing, and to make sure that not all workers restart at the same time.

   cleanup
         my $bool = $prefork->cleanup;
         $prefork = $prefork->cleanup($bool);

       Delete "pid_file" automatically once it is not needed anymore, defaults to a true value.

   graceful_timeout
         my $timeout = $prefork->graceful_timeout;
         $prefork    = $prefork->graceful_timeout(15);

       Maximum amount of time in seconds stopping a worker gracefully may take before being
       forced, defaults to 120. Note that this value should usually be a little larger than the
       maximum amount of time you expect any one request to take.

   heartbeat_interval
         my $interval = $prefork->heartbeat_interval;
         $prefork     = $prefork->heartbeat_interval(3);

       Heartbeat interval in seconds, defaults to 5.

   heartbeat_timeout
         my $timeout = $prefork->heartbeat_timeout;
         $prefork    = $prefork->heartbeat_timeout(2);

       Maximum amount of time in seconds before a worker without a heartbeat will be stopped
       gracefully, defaults to 30. Note that this value should usually be a little larger than
       the maximum amount of time you expect any one operation to block the event loop.

   pid_file
         my $file = $prefork->pid_file;
         $prefork = $prefork->pid_file('/tmp/prefork.pid');

       Full path of process id file, defaults to "prefork.pid" in a temporary directory.

   spare
         my $spare = $prefork->spare;
         $prefork  = $prefork->spare(4);

       Temporarily spawn up to this number of additional workers if there is a need, defaults to
       2. This allows for new workers to be started while old ones are still shutting down
       gracefully, drastically reducing the performance cost of worker restarts.

   workers
         my $workers = $prefork->workers;
         $prefork    = $prefork->workers(10);

       Number of worker processes, defaults to 4. A good rule of thumb is two worker processes
       per CPU core for applications that perform mostly non-blocking operations, blocking
       operations often require more and benefit from decreasing concurrency with "clients" in
       Mojo::Server::Daemon (often as low as 1).

METHODS

       Mojo::Server::Prefork inherits all methods from Mojo::Server::Daemon and implements the
       following new ones.

   check_pid
         my $pid = $prefork->check_pid;

       Get process id for running server from "pid_file" or delete it if server is not running.

         say 'Server is not running' unless $prefork->check_pid;

   ensure_pid_file
         $prefork->ensure_pid_file($pid);

       Ensure "pid_file" exists.

   healthy
         my $healthy = $prefork->healthy;

       Number of currently active worker processes with a heartbeat.

   run
         $prefork->run;

       Run server and wait for "MANAGER SIGNALS".

SEE ALSO

       Mojolicious, Mojolicious::Guides, <http://mojolicious.org>.