Provided by: libterm-readkey-perl_2.37-1build1_amd64 bug

NAME

       Term::ReadKey - A perl module for simple terminal control

SYNOPSIS

           use Term::ReadKey;
           ReadMode 4; # Turn off controls keys
           while (not defined ($key = ReadKey(-1))) {
               # No key yet
           }
           print "Get key $key\n";
           ReadMode 0; # Reset tty mode before exiting

DESCRIPTION

       Term::ReadKey is a compiled perl module dedicated to providing simple control over
       terminal driver modes (cbreak, raw, cooked, etc.,) support for non-blocking reads, if the
       architecture allows, and some generalized handy functions for working with terminals. One
       of the main goals is to have the functions as portable as possible, so you can just plug
       in "use Term::ReadKey" on any architecture and have a good likelihood of it working.

       Version 2.30.01: Added handling of arrows, page up/down, home/end, insert/delete keys
       under Win32. These keys emit xterm-compatible sequences.  Works with Term::ReadLine::Perl.

       ReadMode MODE [, Filehandle]
           Takes an integer argument or a string synonym (case insensitive), which can currently
           be one of the following values:

               INT   SYNONYM    DESCRIPTION

               0    'restore'   Restore original settings.

               1    'normal'    Change to what is commonly the default mode,
                                echo on, buffered, signals enabled, Xon/Xoff
                                possibly enabled, and 8-bit mode possibly disabled.

               2    'noecho'    Same as 1, just with echo off. Nice for
                                reading passwords.

               3    'cbreak'    Echo off, unbuffered, signals enabled, Xon/Xoff
                                possibly enabled, and 8-bit mode possibly enabled.

               4    'raw'       Echo off, unbuffered, signals disabled, Xon/Xoff
                                disabled, and 8-bit mode possibly disabled.

               5    'ultra-raw' Echo off, unbuffered, signals disabled, Xon/Xoff
                                disabled, 8-bit mode enabled if parity permits,
                                and CR to CR/LF translation turned off.

           These functions are automatically applied to the STDIN handle if no other handle is
           supplied. Modes 0 and 5 have some special properties worth mentioning: not only will
           mode 0 restore original settings, but it cause the next ReadMode call to save a new
           set of default settings. Mode 5 is similar to mode 4, except no CR/LF translation is
           performed, and if possible, parity will be disabled (only if not being used by the
           terminal, however. It is no different from mode 4 under Windows.)

           If you just need to read a key at a time, then modes 3 or 4 are probably sufficient.
           Mode 4 is a tad more flexible, but needs a bit more work to control. If you use
           ReadMode 3, then you should install a SIGINT or END handler to reset the terminal (via
           ReadMode 0) if the user aborts the program via "^C". (For any mode, an END handler
           consisting of "ReadMode 0" is actually a good idea.)

           If you are executing another program that may be changing the terminal mode, you will
           either want to say

               ReadMode 1;             # same as ReadMode 'normal'
               system('someprogram');
               ReadMode 1;

           which resets the settings after the program has run, or:

               $somemode=1;
               ReadMode 0;             # same as ReadMode 'restore'
               system('someprogram');
               ReadMode 1;

           which records any changes the program may have made, before resetting the mode.

       ReadKey MODE [, Filehandle]
           Takes an integer argument, which can currently be one of the following values:

               0    Perform a normal read using getc
               -1   Perform a non-blocked read
               >0   Perform a timed read

           If the filehandle is not supplied, it will default to STDIN. If there is nothing
           waiting in the buffer during a non-blocked read, then undef will be returned.  In most
           situations, you will probably want to use "ReadKey -1".

           NOTE that if the OS does not provide any known mechanism for non-blocking reads, then
           a "ReadKey -1" can die with a fatal error. This will hopefully not be common.

           If MODE is greater then zero, then ReadKey will use it as a timeout value in seconds
           (fractional seconds are allowed), and won't return "undef" until that time expires.

           NOTE, again, that some OS's may not support this timeout behaviour.

           If MODE is less then zero, then this is treated as a timeout of zero, and thus will
           return immediately if no character is waiting. A MODE of zero, however, will act like
           a normal getc.

           NOTE, there are currently some limitations with this call under Windows.  It may be
           possible that non-blocking reads will fail when reading repeating keys from more then
           one console.

       ReadLine MODE [, Filehandle]
           Takes an integer argument, which can currently be one of the following values:

               0    Perform a normal read using scalar(<FileHandle>)
               -1   Perform a non-blocked read
               >0   Perform a timed read

           If there is nothing waiting in the buffer during a non-blocked read, then undef will
           be returned.

           NOTE, that if the OS does not provide any known mechanism for non-blocking reads, then
           a "ReadLine 1" can die with a fatal error. This will hopefully not be common.

           NOTE that a non-blocking test is only performed for the first character in the line,
           not the entire line.  This call will probably not do what you assume, especially with
           "ReadMode" MODE values higher then 1. For example, pressing Space and then Backspace
           would appear to leave you where you started, but any timeouts would now be suspended.

           This call is currently not available under Windows.

       GetTerminalSize [Filehandle]
           Returns either an empty array if this operation is unsupported, or a four element
           array containing: the width of the terminal in characters, the height of the terminal
           in character, the width in pixels, and the height in pixels. (The pixel size will only
           be valid in some environments.)

           NOTE, under Windows, this function must be called with an output filehandle, such as
           "STDOUT", or a handle opened to "CONOUT$".

       SetTerminalSize WIDTH,HEIGHT,XPIX,YPIX [, Filehandle]
           Return -1 on failure, 0 otherwise.

           NOTE that this terminal size is only for informative value, and changing the size via
           this mechanism will not change the size of the screen. For example, XTerm uses a call
           like this when it resizes the screen. If any of the new measurements vary from the
           old, the OS will probably send a SIGWINCH signal to anything reading that tty or pty.

           This call does not work under Windows.

       GetSpeed [, Filehandle]
           Returns either an empty array if the operation is unsupported, or a two value array
           containing the terminal in and out speeds, in decimal. E.g, an in speed of 9600 baud
           and an out speed of 4800 baud would be returned as (9600,4800). Note that currently
           the in and out speeds will always be identical in some OS's.

           No speeds are reported under Windows.

       GetControlChars [, Filehandle]
           Returns an array containing key/value pairs suitable for a hash. The pairs consist of
           a key, the name of the control character/signal, and the value of that character, as a
           single character.

           This call does nothing under Windows.

           Each key will be an entry from the following list:

                   DISCARD
                   DSUSPEND
                   EOF
                   EOL
                   EOL2
                   ERASE
                   ERASEWORD
                   INTERRUPT
                   KILL
                   MIN
                   QUIT
                   QUOTENEXT
                   REPRINT
                   START
                   STATUS
                   STOP
                   SUSPEND
                   SWITCH
                   TIME

           Thus, the following will always return the current interrupt character, regardless of
           platform.

                   %keys = GetControlChars;
                   $int = $keys{INTERRUPT};

       SetControlChars [, Filehandle]
           Takes an array containing key/value pairs, as a hash will produce. The pairs should
           consist of a key that is the name of a legal control character/signal, and the value
           should be either a single character, or a number in the range 0-255. SetControlChars
           will die with a runtime error if an invalid character name is passed or there is an
           error changing the settings. The list of valid names is easily available via

                   %cchars = GetControlChars();
                   @cnames = keys %cchars;

           This call does nothing under Windows.

AUTHOR

       Kenneth Albanowski <kjahds@kjahds.com>

       Currently maintained by Jonathan Stowe <jns@gellyfish.co.uk>

SUPPORT

       The code is maintained at

            https://github.com/jonathanstowe/TermReadKey

       Please feel free to fork and suggest patches.

LICENSE

       Prior to the 2.31 release the license statement was:

        Copyright (C) 1994-1999 Kenneth Albanowski.
                      2001-2005 Jonathan Stowe and others

                      Unlimited distribution and/or modification is allowed as long as this
                      copyright notice remains intact.

       And was only stated in the README file.

       Because I believe the original author's intent was to be more open than the other commonly
       used licenses I would like to leave that in place. However if you or your lawyers require
       something with some more words you can optionally choose to license this under the
       standard Perl license:

             This module is free software; you can redistribute it and/or modify it
             under the terms of the Artistic License. For details, see the full
             text of the license in the file "Artistic" that should have been provided
             with the version of perl you are using.

             This program is distributed in the hope that it will be useful, but
             without any warranty; without even the implied warranty of merchantability
             or fitness for a particular purpose.