Provided by: perl-doc_5.26.1-6ubuntu0.7_all bug

NAME

       mro - Method Resolution Order

SYNOPSIS

         use mro; # enables next::method and friends globally

         use mro 'dfs'; # enable DFS MRO for this class (Perl default)
         use mro 'c3'; # enable C3 MRO for this class

DESCRIPTION

       The "mro" namespace provides several utilities for dealing with method resolution order
       and method caching in general.

       These interfaces are only available in Perl 5.9.5 and higher.  See MRO::Compat on CPAN for
       a mostly forwards compatible implementation for older Perls.

OVERVIEW

       It's possible to change the MRO of a given class either by using "use mro" as shown in the
       synopsis, or by using the "mro::set_mro" function below.

       The special methods "next::method", "next::can", and "maybe::next::method" are not
       available until this "mro" module has been loaded via "use" or "require".

The C3 MRO

       In addition to the traditional Perl default MRO (depth first search, called "DFS" here),
       Perl now offers the C3 MRO as well.  Perl's support for C3 is based on the work done in
       Stevan Little's module Class::C3, and most of the C3-related documentation here is ripped
       directly from there.

   What is C3?
       C3 is the name of an algorithm which aims to provide a sane method resolution order under
       multiple inheritance. It was first introduced in the language Dylan (see links in the "SEE
       ALSO" section), and then later adopted as the preferred MRO (Method Resolution Order) for
       the new-style classes in Python 2.3. Most recently it has been adopted as the "canonical"
       MRO for Perl 6 classes, and the default MRO for Parrot objects as well.

   How does C3 work
       C3 works by always preserving local precedence ordering. This essentially means that no
       class will appear before any of its subclasses. Take, for instance, the classic diamond
       inheritance pattern:

            <A>
           /   \
         <B>   <C>
           \   /
            <D>

       The standard Perl 5 MRO would be (D, B, A, C). The result being that A appears before C,
       even though C is the subclass of A. The C3 MRO algorithm however, produces the following
       order: (D, B, C, A), which does not have this issue.

       This example is fairly trivial; for more complex cases and a deeper explanation, see the
       links in the "SEE ALSO" section.

Functions

   mro::get_linear_isa($classname[, $type])
       Returns an arrayref which is the linearized MRO of the given class.  Uses whichever MRO is
       currently in effect for that class by default, or the given MRO (either "c3" or "dfs" if
       specified as $type).

       The linearized MRO of a class is an ordered array of all of the classes one would search
       when resolving a method on that class, starting with the class itself.

       If the requested class doesn't yet exist, this function will still succeed, and return "[
       $classname ]"

       Note that "UNIVERSAL" (and any members of "UNIVERSAL"'s MRO) are not part of the MRO of a
       class, even though all classes implicitly inherit methods from "UNIVERSAL" and its
       parents.

   mro::set_mro ($classname, $type)
       Sets the MRO of the given class to the $type argument (either "c3" or "dfs").

   mro::get_mro($classname)
       Returns the MRO of the given class (either "c3" or "dfs").

   mro::get_isarev($classname)
       Gets the "mro_isarev" for this class, returned as an arrayref of class names.  These are
       every class that "isa" the given class name, even if the isa relationship is indirect.
       This is used internally by the MRO code to keep track of method/MRO cache invalidations.

       As with "mro::get_linear_isa" above, "UNIVERSAL" is special.  "UNIVERSAL" (and parents')
       isarev lists do not include every class in existence, even though all classes are
       effectively descendants for method inheritance purposes.

   mro::is_universal($classname)
       Returns a boolean status indicating whether or not the given classname is either
       "UNIVERSAL" itself, or one of "UNIVERSAL"'s parents by @ISA inheritance.

       Any class for which this function returns true is "universal" in the sense that all
       classes potentially inherit methods from it.

   mro::invalidate_all_method_caches()
       Increments "PL_sub_generation", which invalidates method caching in all packages.

   mro::method_changed_in($classname)
       Invalidates the method cache of any classes dependent on the given class.  This is not
       normally necessary.  The only known case where pure perl code can confuse the method cache
       is when you manually install a new constant subroutine by using a readonly scalar value,
       like the internals of constant do.  If you find another case, please report it so we can
       either fix it or document the exception here.

   mro::get_pkg_gen($classname)
       Returns an integer which is incremented every time a real local method in the package
       $classname changes, or the local @ISA of $classname is modified.

       This is intended for authors of modules which do lots of class introspection, as it allows
       them to very quickly check if anything important about the local properties of a given
       class have changed since the last time they looked.  It does not increment on method/@ISA
       changes in superclasses.

       It's still up to you to seek out the actual changes, and there might not actually be any.
       Perhaps all of the changes since you last checked cancelled each other out and left the
       package in the state it was in before.

       This integer normally starts off at a value of 1 when a package stash is instantiated.
       Calling it on packages whose stashes do not exist at all will return 0.  If a package
       stash is completely deleted (not a normal occurrence, but it can happen if someone does
       something like "undef %PkgName::"), the number will be reset to either 0 or 1, depending
       on how completely the package was wiped out.

   next::method
       This is somewhat like "SUPER", but it uses the C3 method resolution order to get better
       consistency in multiple inheritance situations.  Note that while inheritance in general
       follows whichever MRO is in effect for the given class, "next::method" only uses the C3
       MRO.

       One generally uses it like so:

         sub some_method {
           my $self = shift;
           my $superclass_answer = $self->next::method(@_);
           return $superclass_answer + 1;
         }

       Note that you don't (re-)specify the method name.  It forces you to always use the same
       method name as the method you started in.

       It can be called on an object or a class, of course.

       The way it resolves which actual method to call is:

       1.  First, it determines the linearized C3 MRO of the object or class it is being called
           on.

       2.  Then, it determines the class and method name of the context it was invoked from.

       3.  Finally, it searches down the C3 MRO list until it reaches the contextually enclosing
           class, then searches further down the MRO list for the next method with the same name
           as the contextually enclosing method.

       Failure to find a next method will result in an exception being thrown (see below for
       alternatives).

       This is substantially different than the behavior of "SUPER" under complex multiple
       inheritance.  (This becomes obvious when one realizes that the common superclasses in the
       C3 linearizations of a given class and one of its parents will not always be ordered the
       same for both.)

       Caveat: Calling "next::method" from methods defined outside the class:

       There is an edge case when using "next::method" from within a subroutine which was created
       in a different module than the one it is called from. It sounds complicated, but it really
       isn't. Here is an example which will not work correctly:

         *Foo::foo = sub { (shift)->next::method(@_) };

       The problem exists because the anonymous subroutine being assigned to the *Foo::foo glob
       will show up in the call stack as being called "__ANON__" and not "foo" as you might
       expect. Since "next::method" uses "caller" to find the name of the method it was called
       in, it will fail in this case.

       But fear not, there's a simple solution. The module "Sub::Name" will reach into the perl
       internals and assign a name to an anonymous subroutine for you. Simply do this:

         use Sub::Name 'subname';
         *Foo::foo = subname 'Foo::foo' => sub { (shift)->next::method(@_) };

       and things will Just Work.

   next::can
       This is similar to "next::method", but just returns either a code reference or "undef" to
       indicate that no further methods of this name exist.

   maybe::next::method
       In simple cases, it is equivalent to:

          $self->next::method(@_) if $self->next::can;

       But there are some cases where only this solution works (like "goto
       &maybe::next::method");

SEE ALSO

   The original Dylan paper
       <http://haahr.tempdomainname.com/dylan/linearization-oopsla96.html>

   Pugs
       The Pugs prototype Perl 6 Object Model uses C3

   Parrot
       Parrot now uses C3

       <http://use.perl.org/~autrijus/journal/25768>

   Python 2.3 MRO related links
       <http://www.python.org/2.3/mro.html>
       <http://www.python.org/2.2.2/descrintro.html#mro>

   Class::C3
       Class::C3

AUTHOR

       Brandon L. Black, <blblack@gmail.com>

       Based on Stevan Little's Class::C3