Provided by: ctdb_4.7.6+dfsg~ubuntu-0ubuntu2.29_amd64 bug

NAME

       ctdbd.conf - CTDB daemon configuration file

DESCRIPTION

       This file contains CTDB configuration variables that are affect the operation of CTDB. The
       default location of this file is /etc/ctdb/ctdbd.conf.

       This file is a shell script (see sh(1)) but is usually limited to simple variable
       assignments and shell-style comments.

       CTDB configuration variables are grouped into several categories below.

       Variables defined in this document can also be set in a distribution-specific
       configuration file such as /etc/sysconfig/ctdb (Red Hat) or /etc/default/ctdb (Debian).
       However, these files should be reserved for variables used by the initscript. A historical
       alternative is /etc/ctdb/sysconfig/ctdb - this is deprecated.

INITSCRIPT CONFIGURATION

       Some options must be available to the initscript so they need to be set in the
       distribution-specific initscript configuration, such as /etc/sysconfig/ctdb or
       /etc/default/ctdb.

       CTDB_PIDFILE=FILENAME
           FILENAME is the name of the file used to contain the process ID (PID) of the main CTDB
           daemon when it is running. This is passed from the initscript to ctdbd_wrapper(1).

           Default is /var/run/ctdb/ctdbd.pid. Corresponds to --pidfile.

GLOBAL CONFIGURATION

       These options may be used in the initscripts, daemon and scripts.

       CTDB_BASE=DIRECTORY
           DIRECTORY containing CTDB scripts and configuration files.

DAEMON CONFIGURATION

       Variables in this section are processed by ctdbd_wrapper(1) and are converted into
       command-line arguments to ctdbd(1). Correspondence with ctdbd(1) options is shown for each
       variable. The the documentation for the relevant options for more details.

       Many of these variables are also used by event scripts.

       CTDB_CAPABILITY_LMASTER=yes|no
           Defaults to yes. Corresponds to --no-lmaster.

       CTDB_CAPABILITY_RECMASTER=yes|no
           Defaults to yes. Corresponds to --no-recmaster.

       CTDB_DBDIR=DIRECTORY
           Defaults to /var/lib/ctdb.

           Apart from a DIRECTORY, this can take a special value of the form tmpfs[:OPTIONS].
           OPTIONS is a comma-separated list of any permissible options to the tmpfs filesystem.
           The only pre-specified default is mode=700, which can overridden by specifying mode in
           OPTIONS. It probably makes sense to specify a maximum size.

           Corresponds to --dbdir.

       CTDB_DBDIR_PERSISTENT=DIRECTORY
           Defaults to /var/lib/ctdb/persistent.

           Corresponds to --dbdir-persistent.

       CTDB_DBDIR_STATE=DIRECTORY
           Defaults to /var/lib/ctdb/state.

           Corresponds to --dbdir-state.

       CTDB_DEBUGLEVEL=DEBUGLEVEL
           Default is NOTICE. Corresponds to -d or --debug.

       CTDB_EVENT_SCRIPT_DIR=DIRECTORY
           Default is CTDB_BASE/events.d, so usually /etc/ctdb/events.d. Corresponds to
           --event-script-dir.

       CTDB_LOGGING=STRING
           STRING specifies where ctdbd will write its log. The default is
           file:/var/log/ctdb/log.ctdb. Corresponds to --logging.

           Valid values are:

           file:FILENAME
               FILENAME where ctdbd will write its log. This is usually /var/log/ctdb/log.ctdb.

           syslog[:METHOD]
               CTDB will log to syslog. By default this will use the syslog(3) API.

               If METHOD is specified then it specifies an extension that causes logging to be
               done in a non-blocking fashion. This can be useful under heavy loads that might
               cause the syslog daemon to dequeue messages too slowly, which would otherwise
               cause CTDB to block when logging. METHOD must be one of:

               nonblocking
                   CTDB will log to syslog via /dev/log in non-blocking mode.

               udp
                   CTDB will log to syslog via UDP to localhost:514. The syslog daemon must be
                   configured to listen on (at least) localhost:514. Most implementations will
                   log the messages against hostname "localhost" - this is a limit of the
                   implementation for compatibility with more syslog daemon implementations.

               udp-rfc5424
                   As with "udp" but messages are sent in RFC5424 format. This method will log
                   the correct hostname but is not as widely implemented in syslog daemons.

       CTDB_NODES=FILENAME
           Default is CTDB_BASE/nodes, so usually /etc/ctdb/nodes. Corresponds to --nlist.

       CTDB_NOSETSCHED=yes|no
           Defaults to no. Corresponds to --nosetsched.

           Usually CTDB runs with real-time priority. If you are running CTDB on a platform that
           does not support real-time priority, you can set this.

       CTDB_NOTIFY_SCRIPT=FILENAME
           No default, usually /etc/ctdb/notify.sh. Corresponds to --notification-script.

       CTDB_MAX_PERSISTENT_CHECK_ERRORS=NUM
           Default 0. Corresponds to --max-persistent-check-errors.

       CTDB_NODE_ADDRESS=IPADDR
           IPADDR is the private IP address that ctdbd will bind to. Corresponds to --listen.

           By default ctdbd will select the first address from the nodes list that in can bind
           to. See also CTDB_NODES.

           This option is only required when automatic address detection can not be used. This
           can be the case when running multiple ctdbd daemons/nodes on the same physical host
           (usually for testing), using InfiniBand for the private network or on Linux when
           sysctl net.ipv4.ip_nonlocal_bind=1.

       CTDB_PUBLIC_ADDRESSES=FILENAME
           No default, usually /etc/ctdb/public_addresses. Corresponds to --public-addresses.

       CTDB_PUBLIC_INTERFACE=INTERFACE
           No default. Corresponds to --public-interface.

       CTDB_RECOVERY_LOCK=LOCK
           LOCK specifies the cluster-wide mutex used to detect and prevent a partitioned cluster
           (or "split brain").

           No default, but the default configuration file specifies
           /some/place/on/shared/storage, which should be change to a useful value. Corresponds
           to --reclock.

           For information about the recovery lock please see the RECOVERY LOCK section in
           ctdb(7).

       CTDB_SCRIPT_LOG_LEVEL=DEBUGLEVEL
           Defaults to ERR. Corresponds to --script-log-level.

       CTDB_SOCKET=FILENAME
           Defaults to /var/run/ctdb/ctdbd.socket. Corresponds to --socket.

           If you change this then you probably want to set this in root's environment (perhaps
           in a file in /etc/profile.d) so that you can use the ctdb(1) command in a
           straightforward manner.

       CTDB_START_AS_DISABLED=yes|no
           Default is no. Corresponds to --start-as-disabled.

       CTDB_START_AS_STOPPED=yes|no
           Default is no. Corresponds to --start-as-stopped.

       CTDB_TRANSPORT=tcp|infiniband
           Defaults to tcp. Corresponds to --transport.

       While the following variables do not translate into daemon options they are used by
       ctdbd_wrapper(1) when starting and stopping ctdbd(1).

       CTDB_SHUTDOWN_TIMEOUT=NUM
           NUM is the number of seconds to wait for ctdbd(1) to shut down gracefully before
           giving up and killing it.

           Defaults is 30.

       CTDB_STARTUP_TIMEOUT=NUM
           NUM is the number of seconds to wait for ctdbd(1) complete early initialisation up to
           a point where it is unlikely to abort. If ctdbd doesn't complete the "setup" event
           before this timeout then it is killed.

           Defaults is 10.

NETWORK CONFIGURATION

   NAT GATEWAY
       NAT gateway is used to configure fallback routing for nodes when they do not host any
       public IP addresses. For example, it allows unhealthy nodes to reliably communicate with
       external infrastructure. One node in a NAT gateway group will be designated as the NAT
       gateway master node and other (slave) nodes will be configured with fallback routes via
       the NAT gateway master node. For more information, see the NAT GATEWAY section in ctdb(7).

       CTDB_NATGW_DEFAULT_GATEWAY=IPADDR
           IPADDR is an alternate network gateway to use on the NAT gateway master node. If set,
           a fallback default route is added via this network gateway.

           No default. Setting this variable is optional - if not set that no route is created on
           the NAT gateway master node.

       CTDB_NATGW_NODES=FILENAME
           FILENAME contains the list of nodes that belong to the same NAT gateway group.

           File format:

               IPADDR [slave-only]

           IPADDR is the private IP address of each node in the NAT gateway group.

           If "slave-only" is specified then the corresponding node can not be the NAT gateway
           master node. In this case CTDB_NATGW_PUBLIC_IFACE and CTDB_NATGW_PUBLIC_IP are
           optional and unused.

           No default, usually /etc/ctdb/natgw_nodes when enabled.

       CTDB_NATGW_PRIVATE_NETWORK=IPADDR/MASK
           IPADDR/MASK is the private sub-network that is internally routed via the NAT gateway
           master node. This is usually the private network that is used for node addresses.

           No default.

       CTDB_NATGW_PUBLIC_IFACE=IFACE
           IFACE is the network interface on which the CTDB_NATGW_PUBLIC_IP will be configured.

           No default.

       CTDB_NATGW_PUBLIC_IP=IPADDR/MASK
           IPADDR/MASK indicates the IP address that is used for outgoing traffic (originating
           from CTDB_NATGW_PRIVATE_NETWORK) on the NAT gateway master node. This must not be a
           configured public IP address.

           No default.

       CTDB_NATGW_STATIC_ROUTES=IPADDR/MASK[@GATEWAY] ...
           Each IPADDR/MASK identifies a network or host to which NATGW should create a fallback
           route, instead of creating a single default route. This can be used when there is
           already a default route, via an interface that can not reach required infrastructure,
           that overrides the NAT gateway default route.

           If GATEWAY is specified then the corresponding route on the NATGW master node will be
           via GATEWAY. Such routes are created even if CTDB_NATGW_DEFAULT_GATEWAY is not
           specified. If GATEWAY is not specified for some networks then routes are only created
           on the NATGW master node for those networks if CTDB_NATGW_DEFAULT_GATEWAY is
           specified.

           This should be used with care to avoid causing traffic to unnecessarily double-hop
           through the NAT gateway master, even when a node is hosting public IP addresses. Each
           specified network or host should probably have a corresponding automatically created
           link route or static route to avoid this.

           No default.

       Example
               CTDB_NATGW_NODES=/etc/ctdb/natgw_nodes
               CTDB_NATGW_PRIVATE_NETWORK=192.168.1.0/24
               CTDB_NATGW_DEFAULT_GATEWAY=10.0.0.1
               CTDB_NATGW_PUBLIC_IP=10.0.0.227/24
               CTDB_NATGW_PUBLIC_IFACE=eth0

           A variation that ensures that infrastructure (ADS, DNS, ...) directly attached to the
           public network (10.0.0.0/24) is always reachable would look like this:

               CTDB_NATGW_NODES=/etc/ctdb/natgw_nodes
               CTDB_NATGW_PRIVATE_NETWORK=192.168.1.0/24
               CTDB_NATGW_PUBLIC_IP=10.0.0.227/24
               CTDB_NATGW_PUBLIC_IFACE=eth0
               CTDB_NATGW_STATIC_ROUTES=10.0.0.0/24

           Note that CTDB_NATGW_DEFAULT_GATEWAY is not specified.

   POLICY ROUTING
       A node running CTDB may be a component of a complex network topology. In particular,
       public addresses may be spread across several different networks (or VLANs) and it may not
       be possible to route packets from these public addresses via the system's default route.
       Therefore, CTDB has support for policy routing via the 13.per_ip_routing eventscript. This
       allows routing to be specified for packets sourced from each public address. The routes
       are added and removed as CTDB moves public addresses between nodes.

       For more information, see the POLICY ROUTING section in ctdb(7).

       CTDB_PER_IP_ROUTING_CONF=FILENAME
           FILENAME contains elements for constructing the desired routes for each source
           address.

           The special FILENAME value __auto_link_local__ indicates that no configuration file is
           provided and that CTDB should generate reasonable link-local routes for each public IP
           address.

           File format:

               IPADDR DEST-IPADDR/MASK [GATEWAY-IPADDR]

           No default, usually /etc/ctdb/policy_routing when enabled.

       CTDB_PER_IP_ROUTING_RULE_PREF=NUM
           NUM sets the priority (or preference) for the routing rules that are added by CTDB.

           This should be (strictly) greater than 0 and (strictly) less than 32766. A priority of
           100 is recommended, unless this conflicts with a priority already in use on the
           system. See ip(8), for more details.

       CTDB_PER_IP_ROUTING_TABLE_ID_LOW=LOW-NUM, CTDB_PER_IP_ROUTING_TABLE_ID_HIGH=HIGH-NUM
           CTDB determines a unique routing table number to use for the routing related to each
           public address. LOW-NUM and HIGH-NUM indicate the minimum and maximum routing table
           numbers that are used.

           ip(8) uses some reserved routing table numbers below 255. Therefore,
           CTDB_PER_IP_ROUTING_TABLE_ID_LOW should be (strictly) greater than 255.

           CTDB uses the standard file /etc/iproute2/rt_tables to maintain a mapping between the
           routing table numbers and labels. The label for a public address ADDR will look like
           ctdb.addr. This means that the associated rules and routes are easy to read (and
           manipulate).

           No default, usually 1000 and 9000.

       Example
               CTDB_PER_IP_ROUTING_CONF=/etc/ctdb/policy_routing
               CTDB_PER_IP_ROUTING_RULE_PREF=100
               CTDB_PER_IP_ROUTING_TABLE_ID_LOW=1000
               CTDB_PER_IP_ROUTING_TABLE_ID_HIGH=9000

   LVS
       For a general description see the LVS section in ctdb(7).

       Eventscript
               91.lvs

       CTDB_LVS_NODES=FILENAME
           FILENAME contains the list of nodes that belong to the same LVS group.

           File format:

               IPADDR [slave-only]

           IPADDR is the private IP address of each node in the LVS group.

           If "slave-only" is specified then the corresponding node can not be the LVS master
           node. In this case CTDB_LVS_PUBLIC_IFACE and CTDB_LVS_PUBLIC_IP are optional and
           unused.

           No default, usually /etc/ctdb/lvs_nodes when enabled.

       CTDB_LVS_PUBLIC_IFACE=INTERFACE
           INTERFACE is the network interface that clients will use to connection to
           CTDB_LVS_PUBLIC_IP. This is optional for slave-only nodes. No default.

       CTDB_LVS_PUBLIC_IP=IPADDR
           CTDB_LVS_PUBLIC_IP is the LVS public address. No default.

   MISCELLANEOUS NETWORK CONFIGURATION
       CTDB_PARTIALLY_ONLINE_INTERFACES=yes|no
           Whether one or more offline interfaces should cause a monitor event to fail if there
           are other interfaces that are up. If this is "yes" and a node has some interfaces that
           are down then ctdb status will display the node as "PARTIALLYONLINE".

           Note that CTDB_PARTIALLY_ONLINE_INTERFACES=yes is incompatible with NAT gateway, since
           NAT gateway relies on the interface configured by CTDB_NATGW_PUBLIC_IFACE to be up.

           Default is "no".

SERVICE CONFIGURATION

       CTDB can be configured to manage and/or monitor various NAS (and other) services via its
       eventscripts.

       In the simplest case CTDB will manage a service. This means the service will be started
       and stopped along with CTDB, CTDB will monitor the service and CTDB will do any required
       reconfiguration of the service when public IP addresses are failed over.

   SAMBA
       Eventscripts
               49.winbind
               50.samba

       CTDB_MANAGES_SAMBA=yes|no
           Should CTDB manage Samba?

           Default is no.

       CTDB_MANAGES_WINBIND=yes|no
           Should CTDB manage Winbind?

           Default is no.

       CTDB_SAMBA_CHECK_PORTS=PORT-LIST
           When monitoring Samba, check TCP ports in space-separated PORT-LIST.

           Default is to monitor ports that Samba is configured to listen on.

       CTDB_SAMBA_SKIP_SHARE_CHECK=yes|no
           As part of monitoring, should CTDB skip the check for the existence of each directory
           configured as share in Samba. This may be desirable if there is a large number of
           shares.

           Default is no.

       CTDB_SERVICE_NMB=SERVICE
           Distribution specific SERVICE for managing nmbd.

           Default is distribution-dependant.

       CTDB_SERVICE_SMB=SERVICE
           Distribution specific SERVICE for managing smbd.

           Default is distribution-dependant.

       CTDB_SERVICE_WINBIND=SERVICE
           Distribution specific SERVICE for managing winbindd.

           Default is "winbind".

   NFS
       This includes parameters for the kernel NFS server. Alternative NFS subsystems (such as
       NFS-Ganesha[1]) can be integrated using CTDB_NFS_CALLOUT.

       Eventscript
               60.nfs

       CTDB_MANAGES_NFS=yes|no
           Should CTDB manage NFS?

           Default is no.

       CTDB_NFS_CALLOUT=COMMAND
           COMMAND specifies the path to a callout to handle interactions with the configured NFS
           system, including startup, shutdown, monitoring.

           Default is the included nfs-linux-kernel-callout.

       CTDB_NFS_CHECKS_DIR=DIRECTORY
           Specifies the path to a DIRECTORY containing files that describe how to monitor the
           responsiveness of NFS RPC services. See the README file for this directory for an
           explanation of the contents of these "check" files.

           CTDB_NFS_CHECKS_DIR can be used to point to different sets of checks for different NFS
           servers.

           One way of using this is to have it point to, say, /etc/ctdb/nfs-checks-enabled.d and
           populate it with symbolic links to the desired check files. This avoids duplication
           and is upgrade-safe.

           Default is /etc/ctdb/nfs-checks.d, which contains NFS RPC checks suitable for Linux
           kernel NFS.

       CTDB_NFS_SKIP_SHARE_CHECK=yes|no
           As part of monitoring, should CTDB skip the check for the existence of each directory
           exported via NFS. This may be desirable if there is a large number of exports.

           Default is no.

       CTDB_RPCINFO_LOCALHOST=IPADDR|HOSTNAME
           IPADDR or HOSTNAME indicates the address that rpcinfo should connect to when doing
           rpcinfo check on IPv4 RPC service during monitoring. Optimally this would be
           "localhost". However, this can add some performance overheads.

           Default is "127.0.0.1".

       CTDB_RPCINFO_LOCALHOST6=IPADDR|HOSTNAME
           IPADDR or HOSTNAME indicates the address that rpcinfo should connect to when doing
           rpcinfo check on IPv6 RPC service during monitoring. Optimally this would be
           "localhost6" (or similar). However, this can add some performance overheads.

           Default is "::1".

       CTDB_NFS_STATE_FS_TYPE=TYPE
           The type of filesystem used for a clustered NFS' shared state. No default.

       CTDB_NFS_STATE_MNT=DIR
           The directory where a clustered NFS' shared state will be located. No default.

   APACHE HTTPD
       CTDB can manage the Apache web server.

       Eventscript
               41.httpd

       CTDB_MANAGES_HTTPD=yes|no
           Should CTDB manage the Apache web server?

           Default is no.

   CLAMAV
       CTDB has support to manage the popular anti-virus daemon ClamAV.

       Eventscript
               31.clamd

           This eventscript is not enabled by default. Use ctdb enablescript to enable it.

       CTDB_MANAGES_CLAMD=yes|no
           Should CTDB manage ClamAV?

           Default is no.

       CTDB_CLAMD_SOCKET=FILENAME
           FILENAME is the socket to monitor ClamAV.

           No default.

   ISCSI
       CTDB has support for managing the Linux iSCSI tgtd service.

       Eventscript
               70.iscsi

       CTDB_MANAGES_ISCSI=yes|no
           Should CTDB manage iSCSI tgtd?

           Default is no.

       CTDB_START_ISCSI_SCRIPTS=DIRECTORY
           DIRECTORY on shared storage containing scripts to start tgtd for each public IP
           address.

           No default.

   MULTIPATHD
       CTDB can monitor multipath devices to ensure that active paths are available.

       Eventscript
               20.multipathd

           This eventscript is not enabled by default. Use ctdb enablescript to enable it.

       CTDB_MONITOR_MPDEVICES=MP-DEVICE-LIST
           MP-DEVICE-LIST is a list of multipath devices for CTDB to monitor?

           No default.

   VSFTPD
       CTDB can manage the vsftpd FTP server.

       Eventscript
               40.vsftpd

       CTDB_MANAGES_VSFTPD=yes|no
           Should CTDB manage the vsftpd FTP server?

           Default is no.

   SYSTEM RESOURCE MONITORING CONFIGURATION
       CTDB can experience seemingly random (performance and other) issues if system resources
       become too constrained. Options in this section can be enabled to allow certain system
       resources to be checked. They allows warnings to be logged and nodes to be marked
       unhealthy when system resource usage reaches the configured thresholds.

       Some checks are enabled by default. It is recommended that these checks remain enabled or
       are augmented by extra checks. There is no supported way of completely disabling the
       checks.

       Eventscripts
               05.system

           Filesystem and memory usage monitoring is in 05.system.

       CTDB_MONITOR_FILESYSTEM_USAGE=FS-LIMIT-LIST
           FS-LIMIT-LIST is a space-separated list of FILESYSTEM:WARN_LIMIT[:UNHEALTHY_LIMIT]
           triples indicating that warnings should be logged if the space used on FILESYSTEM
           reaches WARN_LIMIT%. If usage reaches UNHEALTHY_LIMIT then the node should be flagged
           unhealthy. Either WARN_LIMIT or UNHEALTHY_LIMIT may be left blank, meaning that check
           will be omitted.

           Default is to warn for each filesystem containing a database directory (CTDB_DBDIR,
           CTDB_DBDIR_PERSISTENT, CTDB_DBDIR_STATE) with a threshold of 90%.

       CTDB_MONITOR_MEMORY_USAGE=MEM-LIMITS
           MEM-LIMITS takes the form WARN_LIMIT[:UNHEALTHY_LIMIT] indicating that warnings should
           be logged if memory usage reaches WARN_LIMIT%. If usage reaches UNHEALTHY_LIMIT then
           the node should be flagged unhealthy. Either WARN_LIMIT or UNHEALTHY_LIMIT may be left
           blank, meaning that check will be omitted.

           Default is 80, so warnings will be logged when memory usage reaches 80%.

       CTDB_MONITOR_SWAP_USAGE=SWAP-LIMITS
           SWAP-LIMITS takes the form WARN_LIMIT[:UNHEALTHY_LIMIT] indicating that warnings
           should be logged if swap usage reaches WARN_LIMIT%. If usage reaches UNHEALTHY_LIMIT
           then the node should be flagged unhealthy. Either WARN_LIMIT or UNHEALTHY_LIMIT may be
           left blank, meaning that check will be omitted.

           Default is 25, so warnings will be logged when swap usage reaches 25%.

   MISCELLANEOUS SERVICE-RELATED CONFIGURATION
       CTDB_MANAGED_SERVICES=SERVICE-LIST
           SERVICE-LIST is a space-separated list of SERVICEs that CTDB should manage. This can
           be used as an alternative to the CTDB_MANAGES_SERVICE variables.

           No default.

TUNABLES CONFIGURATION

       CTDB tunables (see ctdbd-tunables(7)) can be set from the configuration file. They are set
       as follows:

           CTDB_SET_TUNABLE=VALUE

       For example:

           CTDB_SET_MonitorInterval=20

DEBUG AND TEST

       Variable in this section are for debugging and testing CTDB. They should not generally be
       needed.

       CTDB_DEBUG_HUNG_SCRIPT=FILENAME
           FILENAME is a script to run to log debug information when an event script times out.

           Default is CTDB_BASE/debug-hung-script.sh.

       CTDB_DEBUG_HUNG_SCRIPT_LOGFILE=FILENAME
           FILENAME specifies where log messages should go when debugging hung eventscripts. This
           is a testing option. See also CTDB_DEBUG_HUNG_SCRIPT.

           No default. Messages go to stdout/stderr and are logged to the same place as other
           CTDB log messages.

       CTDB_DEBUG_HUNG_SCRIPT_STACKPAT=REGEXP
           REGEXP specifies interesting processes for which stack traces should be logged when
           debugging hung eventscripts and those processes are matched in pstree output. REGEXP
           is an extended regexp so choices are separated by pipes ('|'). However, REGEXP should
           not contain parentheses. See also CTDB_DEBUG_HUNG_SCRIPT.

           Default is "exportfs|rpcinfo".

       CTDB_DEBUG_LOCKS=FILENAME
           FILENAME is a script to run to log debug information when an CTDB fails to freeze
           databases during recovery.

           No default, usually CTDB_BASE/debug_locks.sh.

       CTDB_SYS_ETCDIR=DIRECTORY
           DIRECTORY containing system configuration files. This is used to provide alternate
           configuration when testing and should not need to be changed from the default.

           Default is /etc.

       CTDB_INIT_STYLE=debian|redhat|suse
           This is the init style used by the Linux distribution (or other operating system)
           being used. This is usually determined dynamically by checking the system. This
           variable is used by the initscript to determine which init system primitives to use.
           It is also used by some eventscripts to choose the name of initscripts for certain
           services, since these can vary between distributions.

           No fixed default.

           If this option needs to be changed from the calculated default for the initscript to
           function properly, then it must be set in the distribution-specific initscript
           configuration, such as /etc/sysconfig/ctdb

       CTDB_MAX_CORRUPT_DB_BACKUPS=NUM
           NUM is the maximum number of volatile TDB database backups to be kept (for each
           database) when a corrupt database is found during startup. Volatile TDBs are zeroed
           during startup so backups are needed to debug any corruption that occurs before a
           restart.

           Default is 10.

       CTDB_MAX_OPEN_FILES=NUM
           NUM is the maximum number of open files.

           There is no default.

       CTDB_RC_LOCAL=FILENAME
           FILENAME is a script fragment to be sourced by the functions that is sourced by
           scripts. On example use would be to override function definitions in unit tests. As a
           sanity check, this file must be executable for it to be used.

           No default.

       CTDB_RUN_TIMEOUT_MONITOR=yes|no
           Whether CTDB should simulate timing out monitor events. This uses the 99.timeout
           eventscript.

           Default is no.

       CTDB_SUPPRESS_COREFILE=yes|no
           Whether CTDB core files should be suppressed.

           Default is no.

       CTDB_VALGRIND=yes|no|COMMAND
           If "yes", this causes ctdbd(1) to be run under valgrind(1) with logs going to
           /var/log/ctdb/ctdb_valgrind. If neither "yes" nor "no" then the value is assumed to be
           a COMMAND (e.g. a valgrind variation, a gdb(1) command) that is used in place of the
           default valgrind command. In either case, the --valgrind option is passed to ctdbd.

           Default is no.

       CTDB_VARDIR=DIRECTORY
           DIRECTORY containing CTDB files that are modified at runtime.

           Defaults to /var/lib/ctdb.

FILES

           /etc/ctdb/ctdbd.conf
           /etc/sysconfig/ctdb
           /etc/default/ctdb
           /etc/ctdb/sysconfig/ctdb

SEE ALSO

       ctdbd(1), ctdbd_wrapper(1), onnode(1), ctdb(7), ctdb-tunables(7), http://ctdb.samba.org/

AUTHOR

       This documentation was written by Amitay Isaacs, Martin Schwenke

COPYRIGHT

       Copyright © 2007 Andrew Tridgell, Ronnie Sahlberg

       This program is free software; you can redistribute it and/or modify it under the terms of
       the GNU General Public License as published by the Free Software Foundation; either
       version 3 of the License, or (at your option) any later version.

       This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
       without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
       See the GNU General Public License for more details.

       You should have received a copy of the GNU General Public License along with this program;
       if not, see http://www.gnu.org/licenses.

NOTES

        1. NFS-Ganesha
           https://github.com/nfs-ganesha/nfs-ganesha/wiki