Provided by: firehol-doc_3.1.5+ds-1ubuntu1_all bug

NAME

       firehol-params - optional rule parameters

SYNOPSIS

       Common

       { src | src4 | src6 } [not] host

       { dst | dst4 | dst6 } [not] host

       srctype [not] type

       dsttype [not] type

       proto [not] protocol

       mac [not] macaddr

       dscp [not] value class classid

       mark [not] id

       connmark [not] id

       custommark [not] name id

       rawmark [not] id

       tos [not] id

       custom "iptables-options..."

       custom-in "iptables-options..."

       custom-out "iptables-options..."

       Router Only

       inface [not] interface

       outface [not] interface

       physin [not] interface

       physout [not] interface

       Interface Only

       uid [not] user

       gid [not] group

       Logging

       connlog "log text"

       log "log text" [level loglevel]

       loglimit "log text" [level loglevel]

       Helpers Only

       sport port

       dport port

       state state

       ipset  [not]  name  flags  [no-counters]  [bytes-lt|bytes-eq|bytes-gt|bytes-not-eq number]
       [packets-lt|packets-eq|packets-gt|packets-not-eq number] [options custom-ipset-options]

       limit limit burst

       connlimit upto|above limit [mask mask] [saddr|daddr]

       hashlimit      name      upto|above      amount/period      [burst      amount]      [mode
       {srcip|srcport|dstip|dstport},...]    [srcmask   prefix]   [dstmask  prefix]  [htable-size
       buckets] [htable-max entries] [htable-expire msec] [htable-gcinterval msec]

DESCRIPTION

       Optional rule parameters are accepted by many commands to narrow the match they make.  Not
       all  parameters  are  accepted by all commands so you should check the individual commands
       for exclusions.

       All matches are made against the REQUEST.  FireHOL automatically  sets  up  the  necessary
       stateful rules to deal with replies in the reverse direction.

       All  matches should be true for a statement to be executed.  However, many matches support
       multiple values.  In this case, at least one of the values must match.

       Example:

              server smtp accept src 1.1.1.1 dst 2.2.2.2

       In the above example all smtp requests coming in from 1.1.1.1 and going out to smtp server
       2.2.2.2 will be matched.

              server smtp accept src 1.1.1.1 dst 2.2.2.2,3.3.3.3

       In the above example all smtp requests coming in from 1.1.1.1 and going out to either smtp
       server 2.2.2.2 or 3.3.3.3 will be matched.

       Use the keyword not to match any value other than the one(s) specified.

       The logging parameters are unusual in that they do not affect the match, they just cause a
       log  message  to  be  emitted.   Therefore,  the  logging parameters don't support the not
       option.

       FireHOL is designed so that if you specify a parameter that is also used internally by the
       command then a warning will be issued (and the internal version will be used).

COMMON

   src, dst
       Use  src  and  dst  to  define  the  source  and  destination  IP addresses of the request
       respectively.  host defines the IP or IPs to be matched.

       host can also refer to an ipset, using this syntax: ipset:NAME, where NAME is the name  of
       the  ipset.  The ipset has to be of type hash:ip for this match to work.  The source IP or
       the destination IP will be used for the match, depending if the ipset is given as  src  or
       dst.

       IPs       and       ipsets      can      be      mixed      together,      like      this:
       src 1.1.1.1,ipset:NAME1,2.2.2.2,ipset:NAME2

       Examples:

              server4 smtp accept src not 192.0.2.1
              server4 smtp accept dst 198.51.100.1
              server4 smtp accept src not 192.0.2.1 dst 198.51.100.1
              server6 smtp accept src not 2001:DB8:1::/64
              server6 smtp accept dst 2001:DB8:2::/64
              server6 smtp accept src not 2001:DB8:1::/64 dst 2001:DB8:2::/64

       When attempting to create rules for both IPv4 and IPv6 it is generally easier to  use  the
       src4, src6, dst4 and dst6 pairs:

              server46 smtp accept src4 192.0.2.1 src6 2001:DB8:1::/64
              server46 smtp accept dst4 198.51.100.1 dst6 2001:DB8:2::/64
              server46 smtp accept dst4 $d4 dst6 $d6 src4 not $d4 src6 not $s6

       To  keep the rules sane, if one of the 4/6 pair specifies not, then so must the other.  If
       you do not want to use both IPv4 and IPv6 addresses, you must specify the rule as IPv4  or
       IPv6 only.  It is always possible to write a second IPv4 or IPv6 only rule.

   srctype, dsttype
       Use srctype or dsttype to define the source or destination IP address type of the request.
       type is the address type category as used in the kernel's network stack.  It  can  be  one
       of:

       UNSPEC an unspecified address (i.e.  0.0.0.0)

       UNICAST
              a unicast address

       LOCAL  a local address

       BROADCAST
              a broadcast address

       ANYCAST
              an anycast address

       MULTICAST
              a multicast address

       BLACKHOLE
              a blackhole address

       UNREACHABLE
              an unreachable address

       PROHIBIT
              a prohibited address

       THROW; NAT; XRESOLVE
              undocumented

       See iptables(8) or run iptables -m addrtype --help for more information.  Examples:

              server smtp accept srctype not "UNREACHABLE PROHIBIT"

   proto
       Use proto to match by protocol.  The protocol can be any accepted by iptables(8).

   mac
       Use  mac  to  match  by  MAC  address.   The  macaddr matches to the "remote" host.  In an
       interface, "remote" always means the non-local host.  In a router, "remote" refers to  the
       source  of  requests  for  servers.  It refers to the destination of requests for clients.
       Examples:

               # Only allow pop3 requests to the e6 host
               client pop3 accept mac 00:01:01:00:00:e6

               # Only allow hosts other than e7/e8 to access smtp
               server smtp accept mac not "00:01:01:00:00:e7 00:01:01:00:00:e8"

   dscp
       Use dscp to match the DSCP field on packets.  For details on DSCP values and classids, see
       firehol-dscp(5).

               server smtp accept dscp not "0x20 0x30"
               server smtp accept dscp not class "BE EF"

   mark
       Use mark to match marks set on packets.  For details on mark ids, see firehol-mark(5).

              server smtp accept mark not "20 55"

   tos
       Use tos to match the TOS field on packets.  For details on TOS ids, see firehol-tos(5).

              server smtp accept tos not "Maximize-Throughput 0x10"

   custom
       Use  custom to pass arguments directly to iptables(8).  All of the parameters must be in a
       single quoted string.  To pass an option to iptables(8) that itself contains a  space  you
       need to quote strings in the usual bash(1) manner.  For example:

              server smtp accept custom "--some-option some-value"
              server smtp accept custom "--some-option 'some-value second-value'"

ROUTER ONLY

   inface, outface
       Use  inface  and  outface  to  define  the  interface  via which a request is received and
       forwarded respectively.  Use the same format as firehol-interface(5).  Examples:

              server smtp accept inface not eth0
              server smtp accept inface not "eth0 eth1"
              server smtp accept inface eth0 outface eth1

   physin, physout
       Use physin and physout to define the physical interface via which a request is received or
       send  in  cases  where  the  inface or outface is known to be a virtual interface; e.g.  a
       bridge.  Use the same format as firehol-interface(5).  Examples:

              server smtp accept physin not eth0

INTERFACE ONLY

       These parameters match information related to information gathered from  the  local  host.
       They  apply  only  to  outgoing packets and are silently ignored for incoming requests and
       requests that will be forwarded.

              Note

              The Linux kernel infrastructure to match PID/SID and executable names with pid, sid
              and cmd has been removed so these options can no longer be used.

   uid
       Use  uid  to match the operating system user sending the traffic.  The user is a username,
       uid number or a quoted list of the two.

       For example, to limit which users can access POP3  and  IMAP  by  preventing  replies  for
       certain users from being sent:

              client "pop3 imap" accept user not "user1 user2 user3"

       Similarly, this will allow all requests to reach the server but prevent replies unless the
       web server is running as apache:

              server http accept user apache

   gid
       Use gid to match the operating system group sending the traffic.  The  group  is  a  group
       name, gid number or a quoted list of the two.

LOGGING

   connlog
       Use connlog to log only the first packet of a connection.

   log, loglimit
       Use  log  or loglimit to log matching packets to syslog.  Unlike iptables(8) logging, this
       is not an action: FireHOL will produce multiple iptables(8) commands  to  accomplish  both
       the action for the rule and the logging.

       Logging  is  controlled  using  the  FIREHOL_LOG_OPTIONS and FIREHOL_LOG_LEVEL environment
       variables   -   see   firehol-defaults.conf(5).    loglimit   additionally   honours   the
       FIREHOL_LOG_FREQUENCY and FIREHOL_LOG_BURST variables.

       Specifying level (which takes the same values as FIREHOL_LOG_LEVEL) allows you to override
       the log level for a single rule.

HELPERS ONLY PARAMETERS

   dport, sport
       FireHOL also provides dport, sport and limit which are used internally and  rarely  needed
       within configuration files.

       dport and sport require an argument port which can be a name, number, range (FROM:TO) or a
       quoted list of ports.

       For dport port specifies the destination port of a request and can be useful when matching
       traffic to helper commands (such as nat) where there is no implicit port.

       For  sport  port  specifies  the  source port of a request and can be useful when matching
       traffic to helper commands (such as nat) where there is no implicit port.

   limit
       limit requires the arguments frequency and burst and will limit the matching of traffic in
       both directions.

   connlimit
       connlimit matches on the number of connections per IP.  It has been added to FireHOL since
       v3.

       saddr matches on source IP.  daddr matches on destination IP.  mask groups  IPs  with  the
       mask  given  upto  matches  when  the number of connections is up to the given limit above
       matches when the number of connections above to the given limit

       The number of connections counted are system wide, not service specific.  For example  for
       saddr,  you  cannot  connlimit  2  connections for SSH and 4 for SMTP.  If you connlimit 2
       connections for SSH, then the first 2 connections of a client can be SSH.  If a client has
       already 2 connections to another service, the client will not be able to connect to SSH.

       So, connlimit can safely be used:

       • with daddr to limit the connections a server can accept

       • with saddr to limit the total connections per client to all services.

   hashlimit
       hashlimit has been added to FireHOL since v3.

       hashlimit  hashlimit  uses  hash  buckets to express a rate limiting match (like the limit
       match) for a group of connections using a single iptables  rule.   Grouping  can  be  done
       per-hostgroup  (source  and/or  destination  address)  and/or  per-port.  It gives you the
       ability to express "N packets per time quantum per group" or "N bytes  per  seconds"  (see
       below for some examples).

       A hash limit type (upto, above) and name are required.

       name The name for the /proc/net/ipt_hashlimit/name entry.

       upto   amount[/second|/minute|/hour|/day]   Match  if  the  rate  is  below  or  equal  to
       amount/quantum.  It is specified either as a number, with an optional time quantum  suffix
       (the default is 3/hour), or as amountb/second (number of bytes per second).

       above amount[/second|/minute|/hour|/day] Match if the rate is above amount/quantum.

       burst amount Maximum initial number of packets to match: this number gets recharged by one
       every time the limit specified above is not reached, up to this number; the default is  5.
       When byte-based rate matching is requested, this option specifies the amount of bytes that
       can exceed the given rate.  This option should  be  used  with  caution  -  if  the  entry
       expires, the burst value is reset too.

       mode  {srcip|srcport|dstip|dstport},...  A  comma-separated  list  of objects to take into
       consideration.  If no mode option is given, srcip,dstport is assumed.

       srcmask prefix When --hashlimit-mode srcip is used, all source addresses encountered  will
       be  grouped according to the given prefix length and the so-created subnet will be subject
       to hashlimit.  prefix must be between (inclusive) 0  and  32.   Note  that  srcmask  0  is
       basically  doing  the same thing as not specifying srcip for mode, but is technically more
       expensive.

       dstmask prefix Like srcmask, but for destination addresses.

       htable-size buckets The number of buckets of the hash table

       htable-max entries Maximum entries in the hash.

       htable-expire msec After how many milliseconds do hash entries expire.

       htable-gcinterval msec How many milliseconds between garbage collection intervals.

       Examples:

       matching on source host: "1000 packets per second for every host in 192.168.0.0/16"

              src 192.168.0.0/16 hashlimit mylimit mode srcip upto 1000/sec

       matching on source port: "100 packets per second for every service of 192.168.1.1"

              src 192.168.1.1 hashlimit mylimit mode srcport upto 100/sec

       matching on subnet: "10000 packets per minute for every /28 subnet (groups of 8 addresses)
       in 10.0.0.0/8"

              src 10.0.0.8 hashlimit mylimit mask 28 upto 10000/min

       matching bytes per second: "flows exceeding 512kbyte/s"

              hashlimit mylimit mode srcip,dstip,srcport,dstport above 512kb/s

       matching  bytes  per  second:  "hosts  that exceed 512kbyte/s, but permit up to 1Megabytes
       without matching"

              hashlimit mylimit mode dstip above 512kb/s burst 1mb

SEE ALSO

firehol(1) - FireHOL program

       • firehol.conf(5) - FireHOL configuration

       • firehol-server(5) - server, route commands

       • firehol-client(5) - client command

       • firehol-interface(5) - interface definition

       • firehol-router(5) - router definition

       • firehol-mark(5) - mark config helper

       • firehol-tos(5) - tos config helper

       • firehol-dscp(5) - dscp config helper

       • firehol-defaults.conf(5) - control variables

       • iptables(8) (http://ipset.netfilter.org/iptables.man.html)  -  administration  tool  for
         IPv4 firewalls

       • ip6tables(8)  (http://ipset.netfilter.org/ip6tables.man.html)  - administration tool for
         IPv6 firewalls

       • FireHOL Website (http://firehol.org/)

       • FireHOL Online PDF Manual (http://firehol.org/firehol-manual.pdf)

       • FireHOL Online Documentation (http://firehol.org/documentation/)

AUTHORS

       FireHOL Team.