Provided by: ifupdown2_1.0~git20170314-1_all bug

NAME

       ifupdown-addons-interfaces - ifupdown2 addon modules interface configuration

DESCRIPTION

          ifupdown2 addon modules add incremental functionality to core ifupdown2 tool.

          All  installed  addon  modules are executed on every interface listed in the interfaces
          file. Addon modules are installed under /usr/share/ifupdownaddons. To see the  list  of
          active addon modules, see ifaddon(8).

          Addon  modules  add  new  attributes  to  the  interfaces(5)  file.  Below is a list of
          attribute options provided by each module.   These  can  be  listed  under  each  iface
          section in the interfaces(5) file.

EXAMPLES

          Listed  below  are  addon  modules  and  their supported attributes.  The attributes if
          applicable go under the iface section in the interfaces(5) file.

          ethtool: ethtool configuration module for interfaces
              link-duplex
                 help: set link duplex

                 required: False

                 default: half

                 validvals: half,full

                 example:
                        link-duplex full

              link-autoneg
                 help: set autonegotiation

                 required: False

                 default: off

                 validvals: on,off

                 example:
                        link-autoneg on

              link-speed
                 help: set link speed

                 required: False

                 example:
                        link-speed 1000

          bridge: Bridge configuration module. Supports  both  vlan  aware  and  non  vlan  aware
          bridges.  For  the  vlan  aware bridge, the port sp ecific attributes must be specified
          under the port. And for vlan u naware bridge port specific attributes must be specified
          under the bridge.
              bridge-vlan-aware
                 help:  vlan  aware bridge. Setting this attribute to yes ena bles vlan filtering
                 on the bridge

                 required: False

                 example:
                        bridge-vlan-aware yes/no

              bridge-pathcosts
                 help: bridge set port path costs

                 required: False

                 default: 100

                 example:
                        bridge-pathcosts swp1=100 swp2=100

              bridge-portprios
                 help: bridge port prios

                 required: False

                 default: 32

                 example:
                        bridge-portprios swp1=32 swp2=32

              bridge-fd
                 help: bridge forward delay

                 required: False

                 default: 15

                 example:
                        bridge-fd 15

              bridge-ageing
                 help: bridge ageing

                 required: False

                 default: 300

                 example:
                        bridge-ageing 300

              bridge-hello
                 help: bridge set hello time

                 required: False

                 default: 2

                 example:
                        bridge-hello 2

              bridge-gcint
                 help: bridge garbage collection interval in secs

                 required: False

                 default: 4

                 example:
                        bridge-gcint 4

              bridge-mcquerier
                 help: set multicast querier

                 required: False

                 default: 0

                 example:
                        bridge-mcquerier 0

              bridge-mclmc
                 help: set multicast last member count

                 required: False

                 default: 2

                 example:
                        bridge-mclmc 2

              bridge-mcsqc
                 help: set multicast startup query count

                 required: False

                 default: 2

                 example:
                        bridge-mcsqc 2

              bridge-mcrouter
                 help: set multicast router

                 required: False

                 default: 1

                 example:
                        bridge-mcrouter 1

              bridge-stp
                 help: bridge-stp yes/no

                 required: False

                 default: no

                 validvals: yes,on,off,no

                 example:
                        bridge-stp no

              bridge-pvid
                 help: bridge port pvid. Must be specified under the bridge port

                 required: False

                 example:
                        bridge-pvid 1

              bridge-mcsqi
                 help: set multicast startup query interval (in secs)

                 required: False

                 default: 31

                 example:
                        bridge-mcsqi 31

              bridge-mcmi
                 help: set multicast membership interval (in secs)

                 required: False

                 default: 260

                 example:
                        bridge-mcmi 260

              bridge-mclmi
                 help: set multicast last member interval (in secs)

                 required: False

                 default: 1

                 example:
                        bridge-mclmi 1

              bridge-vids
                 help: bridge port vids. Can be specified under the bridge or under the port.  If
                 specified  under  the  bridge  the  ports  inh  erit  it  unless overridden by a
                 bridge-vids attribuet under the port

                 required: False

                 example:
                        bridge-vids 4000

                        bridge-vids 2000 2200-3000

              bridge-ports
                 help: bridge ports

                 required: True

                 example:
                        bridge-ports swp1.100 swp2.100 swp3.100

                        bridge-ports glob swp1-3.100

                        bridge-ports glob swp[1-3]s[0-4].100

                        bridge-ports regex (swp[1|2|3].100)

              bridge-mcqifaddr
                 help: set multicast query to use ifaddr

                 required: False

                 default: 0

                 example:
                        bridge-mcqifaddr 0

              bridge-waitport
                 help: wait for a max of time secs for the specified ports to become available,if
                 no  ports are specified then those speci fied on bridge-ports will be used here.
                 Specifying no ports he re should not be used if we are using regex or  "all"  on
                 bridge _ports,as it wouldnt work.

                 required: False

                 default: 0

                 example:
                        bridge-waitport 4 swp1 swp2

              bridge-mcqri
                 help: set multicast query response interval (in secs)

                 required: False

                 default: 10

                 example:
                        bridge-mcqri 10

              bridge-hashel
                 help: set hash elasticity

                 required: False

                 default: 4096

                 example:
                        bridge-hashel 4096

              bridge-mcqpi
                 help: set multicast querier interval (in secs)

                 required: False

                 default: 255

                 example:
                        bridge-mcqpi 255

              bridge-hashmax
                 help: set hash max

                 required: False

                 default: 4096

                 example:
                        bridge-hashmax 4096

              bridge-bridgeprio
                 help: bridge priority

                 required: False

                 default: 32768

                 example:
                        bridge-bridgeprio 32768

              bridge-maxage
                 help: bridge set maxage

                 required: False

                 default: 20

                 example:
                        bridge-maxage 20

              bridge-mcsnoop
                 help: set multicast snooping

                 required: False

                 default: 1

                 example:
                        bridge-mcsnoop 1

              bridge-access
                 help: bridge port access vlan. Must be specified under the bridge port

                 required: False

                 example:
                        bridge-access 300

              bridge-maxwait
                 help:  forces  to  time  seconds  the maximum time that the Deb ian bridge setup
                 scripts will wait for the bridge ports to ge t to the forwarding status, doesn't
                 allow factional part. If i t is equal to 0 then no waiting is done

                 required: False

                 default: 0

                 example:
                        bridge-maxwait 3

              bridge-portmcrouter
                 help: set port multicast routers

                 required: False

                 default: 1

                 example:
                        under the bridge: bridge-portmcrouter swp1=1 swp2=1

                        under the port: bridge-portmcrouter 1

              bridge-portmcfl
                 help: port multicast fast leave.

                 required: False

                 default: 0

                 example:
                        under the bridge: bridge-portmcfl swp1=0 swp2=0

                        under the port: bridge-portmcfl 0

              bridge-mcqi
                 help: set multicast query interval (in secs)

                 required: False

                 default: 125

                 example:
                        bridge-mcqi 125

          usercmds: user commands for interfaces
              down
                 help: run command at interface down

                 required: False

              post-up
                 help: run command after interface bring up

                 required: False

              up
                 help: run command at interface bring up

                 required: False

              pre-down
                 help: run command before bringing the interface down

                 required: False

              pre-up
                 help: run command before bringing the interface up

                 required: False

              post-down
                 help: run command after bringing interface down

                 required: False

          mstpctl: mstp configuration module for bridges
              mstpctl-portadminedge
                 help: enable/disable initial edge state of the port

                 required: False

                 default: no

                 validvals: yes,no

                 example:
                        mstpctl-portadminedge swp1=no swp2=no

              mstpctl-portbpdufilter
                 help:  enable/disable  bpdu filter on a port. syntax varies when defined under a
                 bridge vs under a port

                 required: False

                 default: no

                 validvals: yes,no

                 example:
                        under a bridge: mstpctl-portbpdufilter swp1=no swp2=no

                        under a port: mstpctl-portbpdufilter yes

              mstpctl-fdelay
                 help: set forwarding delay

                 required: False

                 default: 15

                 example:
                        mstpctl-fdelay 15

              mstpctl-portnetwork
                 help: enable/disable bridge assurance capability for a por t

                 required: False

                 default: no

                 validvals: yes,no

                 example:
                        mstpctl-portnetwork swp1=no swp2=no

              mstpctl-txholdcount
                 help: bridge transmit holdcount

                 required: False

                 default: 6

                 example:
                        mstpctl-txholdcount 6

              mstpctl-forcevers
                 help: bridge force stp version

                 required: False

                 default: rstp

                 example:
                        mstpctl-forcevers rstp

              mstpctl-portautoedge
                 help: enable/disable auto transition to/from edge state of the port

                 required: False

                 default: yes

                 validvals: yes,no

                 example:
                        mstpctl-portautoedge swp1=yes swp2=yes

              mstpctl-maxhops
                 help: bridge max hops

                 required: False

                 default: 15

                 example:
                        mstpctl-maxhops 15

              mstpctl-treeprio
                 help: tree priority

                 required: False

                 default: 32768

                 validrange: 0-65535

                 example:
                        mstpctl-treeprio 32768

              mstpctl-treeportprio
                 help: port priority for MSTI instance

                 required: False

                 default: 128

                 validrange: 0-240

                 example:
                        mstpctl-treeportprio swp1=128 swp2=128

              mstpctl-portpathcost
                 help: bridge port path cost

                 required: False

                 default: 0

                 example:
                        mstpctl-portpathcost swp1=0 swp2=1

              mstpctl-portrestrtcn
                 help: enable/disable  port  ability  to  propagate  received  to  pology  change
                 notification of the port

                 required: False

                 default: no

                 validvals: yes,no

                 example:
                        mstpctl-portrestrtcn swp1=no swp2=no

              mstpctl-maxage
                 help: max message age

                 required: False

                 default: 20

                 example:
                        mstpctl-maxage 20

              mstpctl-hello
                 help: set hello time

                 required: False

                 default: 2

                 example:
                        mstpctl-hello 2

              mstpctl-portrestrrole
                 help: enable/disable port ability to take root role of the port

                 required: False

                 default: no

                 validvals: yes,no

                 example:
                        mstpctl-portrestrrole swp1=no swp2=no

              mstpctl-bpduguard
                 help: enable/disable bpduguard

                 required: False

                 default: no

                 validvals: yes,no

                 example:
                        mstpctl-bpduguard swp1=no swp2=no

              mstpctl-ageing
                 help: ageing time

                 required: False

                 default: 300

                 example:
                        mstpctl-ageing 300

              mstpctl-treeportcost
                 help: port tree cost

                 required: False

              mstpctl-portp2p
                 help: bridge port p2p detection mode

                 required: False

                 default: auto

                 validvals: yes,no,auto

                 example:
                        mstpctl-portp2p swp1=no swp2=no

          clagd: This module generates the clagd defaults file.
              clagd-priority
                 help: The priority of this clagd switch

                 required: False

                 example:
                        clagd-priority 30000

              clagd-backup-ip
                 help: Backup IP address of the clagd peer

                 required: False

                 example:
                        clagd-backup-ip 192.1.1.1

              clagd-enable
                 help: enable clagd

                 required: False

                 validvals: yes,no

                 example:
                        clagd-enable yes

              clag-id
                 help: multi-chassis lag id

                 required: False

                 default: 0

                 validrange: 0-65535

                 example:
                        clag-id 1

              clagd-peer-ip
                 help: The IP address of the clagd peer

                 required: True

                 example:
                        clagd-peer 10.10.10.2

              clagd-sys-mac
                 help: The system ID of the CLAG pair

                 required: True

                 example:
                        clagd-sys-mac 44:38:39:ff:00:00

              clagd-args
                 help: Additional command line arguments for clagd

                 required: False

                 example:
                        clagd-args --log /var/log/clagd.log

                        clagd-args --verbose --lacpPoll 10

                        clagd-args --debug 0x4

          vlan:  vlan  module configures vlan interfaces.This module under stands vlan interfaces
          with dot notations. eg swp1.100. Vlan inter faces with any other names need to have raw
          device and vlan id att ributes
              vlan-id
                 help: vlan id

                 required: False

              vlan-raw-device
                 help: vlan raw device

                 required: False

          bridgevlan:  bridgevlan  module configures vlan attributes on a vlan aware bridge. This
          module only understands vlan interface name with dot notations. eg br0.100.  where  br0
          is the vlan aware bridge this config is for.
              bridge-igmp-querier-src
                 help: bridge igmp querier src. Must be specified under the vlan interface

                 required: False

                 example:
                        bridge-igmp-querier-src 172.16.101.1

          bond: bond configuration module
              bond-use-carrier
                 help: bond use carrier

                 required: False

                 default: 1

                 validvals: 0,1

                 example:
                        bond-use-carrier 1

              bond-lacp-bypass-period
                 help: grace period (seconds) for lacp bypass

                 required: False

                 default: 0

                 validrange: 0-900

                 example:
                        bond-lacp-bypass-period 100

              bond-miimon
                 help: bond miimon

                 required: False

                 default: 0

                 validrange: 0-255

                 example:
                        bond-miimon 0

              bond-lacp-rate
                 help: bond lacp rate

                 required: False

                 default: 0

                 validvals: 0,1

                 example:
                        bond-lacp-rate 0

              bond-lacp-bypass-priority
                 help: slave priority for lacp bypass

                 required: False

                 example:
                        bond-lacp-bypass-priority swp1=1 swp2=1 swp3=2

              bond-min-links
                 help: bond min links

                 required: False

                 default: 0

                 example:
                        bond-min-links 0

              bond-slaves
                 help: bond slaves

                 required: True

                 example:
                        bond-slaves swp1 swp2

                        bond-slaves glob swp1-2

                        bond-slaves regex (swp[1|2)

              bond-lacp-bypass-allow
                 help: allow lacp bypass

                 required: False

                 default: 0

                 validvals: 0,1

                 example:
                        bond-lacp-bypass-allow 0

              bond-lacp-bypass-allow-all-active
                 help: allow all slaves to be active in lacp bypass irrespective of priority

                 required: False

                 default: 0

                 validvals: 0,1

                 example:
                        bond-lacp-bypass-all-active 1

              bond-mode
                 help: bond mode

                 required: False

                 default: balance-rr

                 validvals:
                 balance-rr,active-backup,balance-xor,broadcast,802.3ad,balance-tlb,balance-alb

                 example:
                        bond-mode 802.3ad

              bond-num-unsol-na
                 help: bond slave devices

                 required: False

                 default: 1

                 validrange: 0-255

                 example:
                        bond-num-unsol-na 1

              bond-ad-sys-priority
                 help: 802.3ad system priority

                 required: False

                 default: 65535

                 example:
                        bond-ad-sys-priority 65535

              bond-xmit-hash-policy
                 help: bond slave devices

                 required: False

                 default: layer2

                 validvals: layer2,layer3+4,layer2+3

                 example:
                        bond-xmit-hash-policy layer2

              bond-num-grat-arp
                 help: bond use carrier

                 required: False

                 default: 1

                 validrange: 0-255

                 example:
                        bond-num-grat-arp 1

              bond-ad-sys-mac-addr
                 help: 802.3ad system mac address

                 required: False

                 default: 00:00:00:00:00:00

                 example:
                        bond-ad-sys-mac-addr 00:00:00:00:00:00

          address: address configuration module for interfaces
              broadcast
                 help: broadcast address

                 required: False

                 example:
                        broadcast 10.0.1.255

              hwaddress
                 help: hw address

                 required: False

                 example:
                        hwaddress 44:38:39:00:27:b8

              alias
                 help: description/alias

                 required: False

                 example:
                        alias testnetwork

              address
                 help: ipv4 or ipv6 addresses

                 required: False

                 example:
                        address 10.0.12.3/24

                        address 2000:1000:1000:1000:3::5/128

              scope
                 help: scope

                 required: False

                 example:
                        scope host

              address-purge
                 help: purge existing addresses. By default  any  existing  ip  addresses  on  an
                 interface  are purged to match persistent addre sses in the interfaces file. Set
                 this attribute to 'no'if you want to preserve existing addresses

                 required: False

                 default: yes

                 example:
                        address-purge yes/no

              preferred-lifetime
                 help: preferred lifetime

                 required: False

                 example:
                        preferred-lifetime forever

                        preferred-lifetime 10

              gateway
                 help: default gateway

                 required: False

                 example:
                        gateway 255.255.255.0

              mtu
                 help: interface mtu

                 required: False

                 default: 1500

                 example:
                        mtu 1600

          addressvirtual: address module configures virtual addresses fo r interfaces. It creates
          a macvlan interface for every mac ip addr ess-virtual line
              address-virtual
                 help: bridge router virtual mac and ip

                 required: False

                 example:
                        address-virtual 00:11:22:33:44:01 11.0.1.254/24 11.0.1.254/24

          vxlan: vxlan module configures vxlan interfaces.
              vxlan-learning
                 help: vxlan learning on/off

                 required: False

                 default: on

                 example:
                        vxlan-learning off

              vxlan-id
                 help: vxlan id

                 required: True

                 example:
                        vxlan-id 100

              vxlan-remoteip
                 help: vxlan remote ip

                 required: False

                 example:
                        vxlan-remoteip 172.16.22.127

              vxlan-svcnodeip
                 help: vxlan id

                 required: False

                 example:
                        vxlan-svcnodeip 172.16.22.125

              vxlan-local-tunnelip
                 help: vxlan local tunnel ip

                 required: False

                 example:
                        vxlan-local-tunnelip 172.16.20.103

SEE ALSO

          interfaces(5), ifup(8), ip(8), mstpctl(8), brctl(8), ethtool(8), clagctl(8)

AUTHOR

       roopa@cumulusnetworks.com

COPYRIGHT

       Copyright 2013 Cumulus Networks, Inc.  All rights reserved.