Provided by: inn2_2.6.1-4build1_amd64 bug

NAME

       innfeed.conf - Configuration file for innfeed

DESCRIPTION

       The configuration file innfeed.conf in pathetc is used to control the innfeed(8) program.
       It is a fairly free-format file that consists of three types of entries:  key:value, peer
       and group.  Comments are from the hash character "#" to the end of the line.

       key:value entries are a keyword and a value separated by a colon (which can itself be
       surrounded by whitespace).  For example:

           max-connections: 10

       A legal key starts with a letter and contains only letters, digits, and the "_" and "-"
       characters.  There are 5 different types of values: integers, floating-point numbers,
       characters, booleans, and strings.

       Integer and floating-point numbers are as to be expected, except that exponents in
       floating-point numbers are not supported.  A boolean value is either "true" or "false"
       (case is not significant).  A character value is a single-quoted character as defined by
       the C-language.  A string value is any other sequence of characters.  If the string needs
       to contain whitespace, then it must be quoted with double quotes, and uses the same format
       for embedding non-printing characters as normal C-language string.

       Peer entries look like:

           peer <name> {
               # body ...
           }

       The word "peer" is required.  The <name> is the same as the site name in INN's newsfeeds
       configuration file.  The body of a peer entry contains some number (possibly zero) of
       key:value entries.

       Group entries look like:

           group <name> {
               # body ...
           }

       The word "group" is required.  The <name> is any string valid as a key.  The body of a
       group entry contains any number of the three types of entries.  So key:value pairs can be
       defined inside a group, and peers can be nested inside a group, and other groups can be
       nested inside a group.

       key:value entries that are defined outside of all peer and group entries are said to be at
       "global scope".  There are global key:value entries that apply to the process as a whole
       (for example the location of the backlog file directory), and there are global key:value
       entries that act as defaults for peers.  When innfeed looks for a specific value in a peer
       entry (for example, the maximum number of connections to set up), if the value is not
       defined in the peer entry, then the enclosing groups are examined for the entry (starting
       at the closest enclosing group).  If there are no enclosing groups, or the enclosing
       groups do not define the key:value, then the value at global scope is used.

       A small example could be:

           # Global value applied to all peers that have
           # no value of their own.
           max-connections: 5

           # A peer definition.  "uunet" is the name used by innd
           # in the newsfeeds configuration file.
           peer uunet {
               ip-name: usenet1.uu.net
           }

           peer vixie {
               ip-name: gw.home.vix.com
               max-connections: 10       # Override global value.
           }

           # A group of two peers which can handle more connections
           # than normal.
           group fast-sites {
               max-connections: 15

               # Another peer.  The "max-connections" value from the
               # "fast-sites" group scope is used.  The "ip-name" value
               # defaults to the peer's name.
               peer data.ramona.vix.com {
               }

               peer bb.home.vix.com {
                   max-connections: 20   # He can really cook.
               }
           }

       Given the above configuration file, the defined peers would have the following values for
       the max-connections key:

           uunet                  5
           vixie                 10
           data.ramona.vix.com   15
           bb.home.vix.com       20

       innfeed ignores key:value pairs it is not interested in.  Some configuration file values
       can be set via a command-line option, in which case that setting overrides the settings in
       the file.

       Configuration files can be included in other configuration files via the syntax:

           $INCLUDE filename

       There is a maximum nesting depth of 10.

       For a fuller example configuration file, see the supplied innfeed.conf.

GLOBAL VALUES

       The following listing show all the keys that apply to the process as whole.  These are not
       required (compiled-in defaults are used where needed).

       news-spool
           This key requires a pathname value and defaults to patharticles in inn.conf.  It
           specifies where the top of the article spool is.  This corresponds to the -a command-
           line option.

       input-file
           This key requires a pathname value.  It specifies the pathname (relative to the
           backlog-directory value) that should be read in funnel-file mode.  This corresponds to
           giving a filename as an argument on the command-line (i.e. its presence also implies
           that funnel-file mode should be used).

           The default is unset; innfeed then runs in channel or batch mode.

       pid-file
           This key requires a pathname value and defaults to innfeed.pid.  It specifies the
           pathname (relative to pathrun in inn.conf) where the pid of the innfeed process should
           be stored.  This corresponds to the -p command-line option.

       debug-level
           This key defines the debug level for the process.  Default is 0.  A non-zero number
           generates a lot of messages to stderr, or to the config-defined log-file.  This
           corresponds to the -d command-line option.

           If a file named innfeed.debug exists in the pathlog directory (as set in inn.conf),
           then debug-level is automatically set to 1.  This is a cheap way of avoiding continual
           reloading of the newsfeeds file when debugging.  Note that debug messages still go to
           log-file.

       debug-shrinking
           This key requires a boolean value and defaults to false (the debug file is allowed to
           grow without bound).  If set to true, this file is truncated when its size reaches a
           certain limit.  See backlog-limit for more details.

       initial-sleep
           This key requires a positive integer.  The default value is 2.  It defines the number
           of seconds to wait when innfeed (or a fork) starts, before beginning to open
           connections to remote hosts.

       fast-exit
           This key requires a boolean value and defaults to false.  If set to true, when innfeed
           receives a SIGTERM or SIGQUIT signal, it will close its listeners as soon as it can,
           even if it means dropping articles.

       use-mmap
           This key requires a boolean value and defaults to true.  When innfeed is given file
           names to send (a fairly rare use case) instead of storage API tokens, it specifies
           whether mmaping should be used if innfeed has been built with mmap(2) support.  If
           article data on disk is not in NNTP-ready format (CR/LF at the end of each line), then
           after mmaping, the article is read into memory and fixed up, so mmaping has no
           positive effect (and possibly some negative effect depending on your system), and so
           in such a case this value should be "false", which corresponds to the -M command-line
           option.

       log-file
           This key requires a pathname value and defaults to innfeed.log.  It specifies where
           any logging messages that could not be sent via syslog(3) should go (such as those
           generated when a positive value for debug-value is used).  This corresponds to the -l
           command-line option.

           This pathname is relative to pathlog in inn.conf.

       log-time-format
           This key requires a format string suitable for strftime(3).  It is used for messages
           sent via syslog(3) and to the status-file.  Default value is "%a %b %d %H:%M:%S %Y".

       backlog-directory
           This key requires a pathname value and defaults to innfeed.  It specifies where the
           current innfeed process should store backlog files.  This corresponds to the -b
           command-line option.

           This pathname is relative to pathspool in inn.conf.

       backlog-highwater
           This key requires a positive integer value and defaults to 5.  It specifies how many
           articles should be kept on the backlog file queue before starting to write new entries
           to disk.

       backlog-ckpt-period
           This key requires a positive integer value and defaults to 30.  It specifies how many
           seconds elapse between checkpoints of the input backlog file.  Too small a number will
           mean frequent disk accesses; too large a number will mean after a crash, innfeed will
           re-offer more already-processed articles than necessary.

       backlog-newfile-period
           This key requires a positive integer value and defaults to 600.  It specifies how many
           seconds elapse before each check for externally generated backlog files that are to be
           picked up and processed.

       backlog-rotate-period
           This key requires a positive integer value and defaults to 60.  It specifies how many
           seconds elapse before innfeed checks for a manually created backlog file and moves the
           output backlog file to the input backlog file.

       dns-retry
           This key requires a positive integer value and defaults to 900.  It defines the number
           of seconds between attempts to re-lookup host information that previously failed to be
           resolved.

       dns-expire
           This key requires a positive integer value and defaults to 86400.  It defines the
           number of seconds between refreshes of name to address DNS translation.  This is so
           long-running processes do not get stuck with stale data, should peer IP addresses
           change.

       gen-html
           This key requires a boolean value and defaults to false.  It specifies whether the
           status-file should be HTML-ified.

       status-file
           This key requires a pathname value and defaults to innfeed.status.  An absolute
           pathname can be used.  It specifies the pathname (relative to pathhttp when gen-html
           is true; otherwise, pathlog as set in inn.conf) where the periodic status of the
           innfeed process should be stored.  This corresponds to the -S command-line option.

       connection-stats
           This key requires a boolean value and defaults to false.  If the value is true, then
           whenever the transmission statistics for a peer are logged, each active connection
           logs its own statistics.  This corresponds to the -z command-line option.

       host-queue-highwater
           This key requires a positive integer value and defaults to 10.  It defines how many
           articles will be held internally for a peer before new arrivals cause article
           information to be spooled to the backlog file.

       stats-period
           This key requires a positive integer value and defaults to 600.  It defines how many
           seconds innfeed waits between generating statistics on transfer rates.

       stats-reset
           This key requires a positive integer value and defaults to 43200.  It defines how many
           seconds innfeed waits before resetting all internal transfer counters back to zero
           (after logging one final time).  This is so a innfeed process running more than a day
           will generate "final" stats that will be picked up by logfile processing scripts.

       initial-reconnect-time
           This key requires a positive integer value and defaults to 30.  It defines how many
           seconds to first wait before retrying to reconnect after a connection failure.  If the
           next attempt fails too, then the reconnect time is approximately doubled until the
           connection succeeds, or max-reconnect-time is reached.

       max-reconnect-time
           This key requires an integer value and defaults to 3600.  It defines the maximum
           number of seconds to wait between attempt to reconnect to a peer.  The initial value
           for reconnection attempts is defined by initial-reconnect-time, and it is doubled
           after each failure, up to this value.

       stdio-fdmax
           This key requires a non-negative integer value and defaults to 0.  If the value is
           greater than zero, then whenever a network socket file descriptor is created and it
           has a value less than this, the file descriptor will be dup'ed to bring the value up
           greater than this.  This is to leave lower numbered file descriptors free for stdio.
           Certain systems, Sun's in particular, require this.  SunOS 4.1.x usually requires a
           value of 128 and Solaris requires a value of 256.  The default if this is not
           specified, is 0.

   Special keys for imapfeed
       The following keys are used with imapfeed to authenticate to a remote host.  Several
       parameters may be included at global scope:

       deliver-authname
           The authname is who you want to authenticate as.

       deliver-password
           This is the appropriate password for authname.

       deliver-username
           The username is who you want to "act" as, that is, who is actually going to be using
           the server.

       deliver-realm
           In this case, the "realm" is the realm in which the specified authname is valid.
           Currently this is only needed by the DIGEST-MD5 SASL mechanism.

       deliver-rcpt-to
           A printf(3)-style format string for creating the envelope recipient address.  The
           pattern MUST include a single string specifier which will be replaced with the
           newgroup (e.g. "bb+%s").  The default is "+%s".

       deliver-to-header
           An optional printf(3)-style format string for creating a To: header field to be
           prepended to the article.  The pattern MUST include a single string specifier which
           will be replaced with the newgroup (e.g. "post+%s@domain").  If not specified, the To:
           header field will not be prepended.

GLOBAL PEER DEFAULTS

       All the key:value pairs mentioned in this section can be specified at global scope.  They
       may also be specified inside a group or peer definition.  Note that when peers are added
       dynamically (i.e. when innfeed receives an article for an unspecified peer), it will add
       the peer site using the parameters specified at global scope.

   Required keys
       No keys are currently required.  They all have a default value, if not present in the
       configuration file.

   Optional keys
       The following keys are optional:

       article-timeout
           This key requires a non-negative integer value.  The default value is 600.  If no
           articles need to be sent to the peer for this many seconds, then the peer is
           considered idle and all its active connections are torn down.

       response-timeout
           This key requires a non-negative integer value.  The default value is 300.  It defines
           the maximum amount of time to wait for a response from the peer after issuing a
           command.

       initial-connections
           This key requires a non-negative integer value.  The default value is 1.  It defines
           the number of connections to be opened immediately when setting up a peer binding.  A
           value of 0 means no connections will be created until an article needs to be sent.

       max-connections
           This key requires a positive integer value.  The default value is 2 but may be
           increased if needed or for large feeds.  It defines the maximum number of connections
           to run in parallel to the peer.  A value of 0 specifies an unlimited number of maximum
           connections.  In general, use of an unlimited number of maximum connections is not
           recommended.  Do not ever set max-connections to zero with dynamic-method 0 set, as
           this will saturate peer hosts with connections.

       close-period
           This key requires a positive integer value and defaults to 86400.  It is the maximum
           number of seconds a connection should be kept open.  Some NNTP servers do not deal
           well with connections being held open for long periods.

       dynamic-method
           This key requires an integer value between 0 and 3.  The default value is 3.  It
           controls how connections are opened, up to the maximum specified by max-connections.
           In general (and specifically, with dynamic-method 0), a new connection is opened when
           the current number of connections is below max-connections, and an article is to be
           sent while no current connections are idle.  Without further restraint (i.e. using
           dynamic-method 0), in practice this means that max-connections connections are
           established while articles are being sent.  Use of other dynamic-method settings
           imposes a further limit on the amount of connections opened below that specified by
           max-connections.  This limit is calculated in different ways, depending of the value
           of dynamic-method.

           Users should note that adding additional connections is not always productive -- just
           because opening twice as many connections results in a small percentage increase of
           articles accepted by the remote peer, this may be at considerable resource cost both
           locally and at the remote site, whereas the remote site might well have received the
           extra articles sent from another peer a fraction of a second later.  Opening large
           numbers of connections is considered antisocial.

           The meanings of the various settings are:

           0 (no method)
             Increase of connections up to max-connections is unrestrained.

           1 (maximize articles per second)
             Connections are increased (up to max-connections) and decreased so as to maximize
             the number of articles per second sent, while using the fewest connections to do
             this.

           2 (set target queue length)
             Connections are increased (up to max-connections) and decreased so as to keep the
             queue of articles to be sent within the bounds set by dynamic-backlog-low and
             dynamic-backlog-high, while using the minimum resources possible.  As the queue will
             tend to fill if the site is not keeping up, this method ensures that the maximum
             number of articles are offered to the peer while using the minimum number of
             connections to achieve this.

           3 (combination)
             This method uses a combination of methods 1 and 2 above.  For sites accepting a
             large percentage of articles, method 2 will be used to ensure these sites are
             offered as complete a feed as possible.  For sites accepting a small percentage of
             articles, method 1 is used, to minimize remote resource usage.  For intermediate
             sites, an appropriate combination is used.

       dynamic-backlog-low
           This key requires a floating-point value between 0 and 100.  It represents (as a
           percentage) the low water mark for the host queue.  If the host queue falls below this
           level while using dynamic-method 2 or 3, and if 2 or more connections are open,
           innfeed will attempt to drop connections to the host.  An Infinite Impulse Response
           (IIR) filter is applied to the value to prevent connection flap (see dynamic-filter).
           The default value is 20.0.  This value must be smaller than dynamic-backlog-high.

       dynamic-backlog-high
           This key requires a floating-point value between 0 and 100.  It represents (as a
           percentage) the high water mark for the host queue.  If the host queue rises above
           this level while using dynamic-method 2 or 3, and if less than max-connections are
           open to the host, innfeed will attempt to open further connections to the host.  An
           Infinite Impulse Response (IIR) filter is applied to the value to prevent connection
           flap (see dynamic-filter).  The default value is 50.0.  This value must be larger than
           dynamic-backlog-low.

       dynamic-backlog-filter
           This key requires a floating-point value between 0 and 1.  It represents the filter
           coefficient used by the Infinite Impulse Response (IIR) filter used to implement
           dynamic-method 2 and 3.  The default value of this filter is 0.7, giving a time
           constant of 1/(1-0.7) articles.  Higher values will result in slower response to queue
           fullness changes; lower values in faster response.

       max-queue-size
           This key requires a positive integer value.  The default value is 20.  It defines the
           maximum number of articles to process at one time when using streaming to transmit to
           a peer.  Larger numbers mean more memory consumed as articles usually get pulled into
           memory (see the description of use-mmap).

       streaming
           This key requires a boolean value.  Its default value is true.  It defines whether
           streaming commands are used to transmit articles to the peers.

       no-check-high
           This key requires a floating-point number which must be in the range [0.0, 100.0].
           When running transmitting with the streaming commands, innfeed attempts an
           optimization called "no-CHECK mode".  This involves not asking the peer if it wants
           the article, but just sending it.  This optimization occurs when the percentage of the
           articles the peer has accepted gets larger than this number.  If this value is set to
           100.0, then this effectively turns off no-CHECK mode, as the percentage can never get
           above 100.0.  If this value is too small, then the number of articles the peer rejects
           will get bigger (and your bandwidth will be wasted).  The default value of 95.0
           usually works pretty well.

       no-check-low
           This key requires a floating-point number which must be in the range [0.0, 100.0], and
           it must be smaller that the value for no-check-high.  When running in no-CHECK mode,
           as described above, if the percentage of articles the remote server accepts drops
           below this number, then the no-CHECK optimization is turned off until the percentage
           gets above the no-check-high value again.  If there is small difference between this
           and the no-check-high value (less than about 5.0), then innfeed may frequently go in
           and out of no-CHECK mode.  If the difference is too big, then it will make it harder
           to get out of no-CHECK mode when necessary (wasting bandwidth).  Keeping this to
           between 5.0 and 10.0 less than no-check-high usually works pretty well.  The default
           value is 90.0.

       no-check-filter
           This is a floating-point value representing the time constant, in articles, over which
           the CHECK/no-CHECK calculations are done.  The default value is 50.0, which will
           implement an Infinite Impulse Response (IIR) filter of time constant 50.  This roughly
           equates to making a decision about the mode over the previous 50 articles.  A higher
           number will result in a slower response to changing percentages of articles accepted;
           a lower number will result in a faster response.

       port-number
           This key requires a positive integer value.  It defines the TCP/IP port number to use
           when connecting to the remote.  Usually, port number 119 is used, which is the default
           value.

       force-ipv4
           This key requires a boolean value.  By default, it is set to false.  Setting it to
           true is the same as setting bindaddress6 to "none" and removing bindaddress from
           "none" if it was set.

       drop-deferred
           This key requires a boolean value.  By default, it is set to false.  When set to true,
           and a peer replies with code 431 or 436 (try again later), innfeed just drops the
           article and does not try to re-send it.  This is useful for some peers that keep on
           deferring articles for a long time to prevent innfeed from trying to offer the same
           article over and over again.

       min-queue-connection
           This key requires a boolean value.  By default, it is set to false.  When set to true,
           innfeed will attempt to use a connection with the least queue size (or the first empty
           connection).  If this key is set to true, it is recommended that dynamic-method be set
           to 0.  This allows for article propagation with the least delay.

       no-backlog
           This key requires a boolean value.  It specifies whether spooling should be enabled
           (false, the default) or disabled (true).  Note that when no-backlog is set, articles
           reported as spooled are actually silently discarded.

       backlog-limit
           This key requires a non-negative integer value.  If the number is 0 (the default),
           then backlog files are allowed to grow without bound when the peer is unable to keep
           up with the article flow.  If this number is greater than 0, then it specifies the
           size (in bytes) the backlog file should get truncated to when the backlog file reaches
           a certain limit.  The limit depends on whether backlog-factor or backlog-limit-
           highwater is used.

           This parameter also applies to the debug file when debug-shrinking is set to true, and
           has the same effect on this file as the one has on backlog files.

       backlog-factor
           This key requires a floating-point value, which must be larger than 1.0.  It is used
           in conjunction with the peer key backlog-limit.  If backlog-limit has a value greater
           than zero, then when the backlog file gets larger than the value backlog-limit *
           backlog-factor, then the backlog file will be truncated to the size backlog-limit.

           For example, if backlog-limit has a value of 1000000, and backlog-factor has a value
           of 2.0, then when the backlog file gets to be larger than 2000000 bytes in size, it
           will be truncated to 1000000 bytes.  The front portion of the file is removed, and the
           trimming happens on line boundaries, so the final size may be a bit less than this
           number.  If backlog-limit-highwater is defined too, then backlog-factor takes
           precedence.  The default value of backlog-factor is 1.1.

           This parameter also applies to the debug file when debug-shrinking is set to true, and
           has the same effect on this file as the one has on backlog files.

       backlog-limit-highwater
           This key requires a positive integer value that must be larger than the value for
           backlog-limit.  The default value is 0.

           If the size of the backlog file gets larger than this value (in bytes), then the
           backlog file will be shrunk down to the size of backlog-limit.  If both backlog-factor
           and backlog-limit-highwater are defined, then the value of backlog-factor is used.

           This parameter also applies to the debug file when debug-shrinking is set to true, and
           has the same effect on this file as the one has on backlog files.

       backlog-feed-first
           This key requires a boolean value.  By default it is set to false.  When set to true,
           the backlog is fed before new files.  This is intended to enforce in-order delivery,
           so setting this to true when initial-connections or max-connections is more than 1 is
           inconsistent.

       bindaddress
           This key requires a string value.  It specifies which outgoing IPv4 address innfeed
           should bind the local end of its connection to.  It must be an IPv4 address in dotted-
           quad format (nnn.nnn.nnn.nnn), "any", or "none".  If not set or set to "any", innfeed
           defaults to letting the kernel choose this address.  If set to "none", innfeed will
           not use IPv4 for outgoing connections to peers in this scope (i.e. it forces IPv6).

           If not set in innfeed.conf, innfeed defaults to the value of sourceaddress from
           inn.conf (which by default is unset).

       bindaddress6
           This key requires a string value.  It behaves like bindaddress except for outgoing
           IPv6 connections.  It must be in numeric IPv6 format (note that a value containing
           colons must be enclosed in double quotes), "any", or "none".  If set to "none",
           innfeed will not use IPv6 for outgoing connections to peers in this scope.

           If not set in innfeed.conf, innfeed defaults to the value of sourceaddress6 from
           inn.conf (which by default is unset).

       username
           This key requires a string value.  If the value is defined, then innfeed tries to
           authenticate by AUTHINFO USER and this value used for user name.  password must also
           be defined, if this key is defined.

       password
           This key requires a string value.  The value is the password used for AUTHINFO PASS.
           username must also be defined, if this key is defined.

PEER VALUES

       As previously explained, the peer definitions can contain redefinitions of any of the
       key:value pairs described in the section about global peer defaults above.  There is one
       key:value pair that is specific to a peer definition.

       ip-name
           This key requires a word value.  The word is the host's FQDN, or the dotted quad IP-
           address.  If this value is not specified, then the name of the peer in the enclosing
           peer block is taken to also be its ip-name.

RELOADING

       If innfeed gets a SIGHUP signal, then it will reread the configuration file.  All values
       at global scope except for backlog-directory can be changed (although note that
       bindaddress and bindaddress6 changes will only affect new connections).

       Any new peers are added and any missing peers have their connections closed.

       The log file is also reopened.

EXAMPLE

       For a comprehensive example, see the sample innfeed.conf distributed with INN and
       installed as a starting point.

       Here are examples of how to format values:

           eg-string:         "New\tconfig\tfile\n"
           eg-long-string:    "A long string that goes
                              over multiple lines.  The
                              newline is kept in the
                              string except when quoted
                              with a backslash \
                              as here."
           eg-simple-string:  A-no-quote-string
           eg-integer:        10
           eg-boolean:        true
           eg-char:           'a'
           eg-ctrl-g:         '\007'

HISTORY

       Written by James Brister <brister@vix.com> for InterNetNews.  Converted to POD by Julien
       Elie.

       Earlier versions of innfeed (up to 0.10.1) were shipped separately; innfeed is now part of
       INN and shares the same version number.  Please note that the innfeed.conf format has
       changed dramatically since version 0.9.3.

       $Id: innfeed.conf.pod 9923 2015-07-14 16:48:11Z iulius $

SEE ALSO

       inn.conf(5), innfeed(8), newsfeeds(5).