Provided by: selinux-utils_2.7-2build2_amd64 bug

NAME

       selabel_x  -  userspace SELinux labeling interface and configuration file format for the X
       Window System contexts backend. This backend is also used to determine the default context
       for labeling remotely connected X clients

SYNOPSIS

       #include <selinux/label.h>

       int selabel_lookup(struct selabel_handle *hnd,
                          char **context,
                          const char *object_name, int object_type);

       int selabel_lookup_raw(struct selabel_handle *hnd,
                          char **context,
                          const char *object_name, int object_type);

DESCRIPTION

       The  X  contexts backend maps from X Window System object names into security contexts. It
       is used to find the appropriate context for X Window  System  objects  whose  significance
       and/or  usage  semantics  are  determined  primarily by name. The returned context must be
       freed using freecon(3).
       selabel_lookup(3) describes the function with its return and error codes.

       This backend is also used to determine the default context for labeling remotely connected
       X clients.

       The object_type argument should be set to one of the following values:

              SELABEL_X_PROP
                     The  object_name  argument  specifies the name of a window property, such as
                     "WM_NAME".

              SELABEL_X_SELN
                     The object_name  argument  specifies  the  name  of  a  selection,  such  as
                     "PRIMARY".

              SELABEL_X_EXT
                     The object_name argument specifies the name of a protocol extension, such as
                     "RENDER".

              SELABEL_X_EVENT
                     The object_name argument specifies the  name  of  an  event  type,  such  as
                     "X11:ButtonPress".

              SELABEL_X_CLIENT
                     The  object_name  argument  is ignored, however it should be set to either *
                     (an asterisk or 'wildcard' that will select the default entry) or a specific
                     entry  such  as  "remote"  in  the  X  contexts file as shown in the EXAMPLE
                     section. The default context for labeling remote X clients is then returned.

              SELABEL_X_POLYPROP
                     Like SELABEL_X_PROP,  but  checks  if  the  property  was  marked  as  being
                     polyinstantiated. See NOTES below.

              SELABEL_X_POLYSELN
                     Like  SELABEL_X_SELN,  but  checks  if  the  selection  was  marked as being
                     polyinstantiated. See NOTES below.

       Any messages generated by selabel_lookup(3) are sent to stderr by default,  although  this
       can be changed by selinux_set_callback(3).

       selabel_lookup_raw  behaves  identically  to  selabel_lookup  but does not perform context
       translation.

       The FILES section details the configuration files used to determine the X object context.

OPTIONS

       In addition to the global options described in selabel_open(3),  this  backend  recognizes
       the following options:

              SELABEL_OPT_PATH
                     A  non-null  value  for  this option specifies a path to a file that will be
                     opened in lieu of the standard X contexts file (see the  FILES  section  for
                     details).

FILES

       The  X  context  file  used  to retrieve a default context depends on the SELABEL_OPT_PATH
       parameter passed to selabel_open(3). If NULL, then the SELABEL_OPT_PATH value will default
       to  the  active  policy  X  contexts  location (as returned by selinux_x_context_path(3)),
       otherwise the actual SELABEL_OPT_PATH value specified is used.

       The default X object contexts file is:
              /etc/selinux/{SELINUXTYPE}/contexts/x_contexts

       Where {SELINUXTYPE}  is  the  entry  from  the  selinux  configuration  file  config  (see
       selinux_config(5)).

       The entries within the X contexts file are shown in the Object Name String Values and FILE
       FORMAT sections.

Object Name String Values

       The string name assigned to each object_type  argument  that  can  be  present  in  the  X
       contexts file are:

                                 ┌───────────────────┬────────────────┐
                                 │object_typeText Name      │
                                 ├───────────────────┼────────────────┤
                                 │SELABEL_X_PROP     │ property       │
                                 ├───────────────────┼────────────────┤
                                 │SELABEL_X_SELN     │ selection      │
                                 ├───────────────────┼────────────────┤
                                 │SELABEL_X_EXT      │ extension      │
                                 ├───────────────────┼────────────────┤
                                 │SELABEL_X_EVENT    │ event          │
                                 ├───────────────────┼────────────────┤
                                 │SELABEL_X_CLIENT   │ client         │
                                 ├───────────────────┼────────────────┤
                                 │SELABEL_X_POLYPROP │ poly_property  │
                                 ├───────────────────┼────────────────┤
                                 │SELABEL_X_POLYSELN │ poly_selection │
                                 └───────────────────┴────────────────┘

FILE FORMAT

       Each line within the X contexts file is as follows:
              object_type object_name context

       Where:
              object_type
                     This  is  the  string  representation of the object type shown in the Object
                     Name String Values section.  There can  be  multiple  lines  with  the  same
                     object_type  string that will form a block of entries (each with a different
                     object_name entry).
              object_name
                     These are the object  names  of  the  specific  X-server  resource  such  as
                     PRIMARY,  CUT_BUFFER0 etc. They are generally defined in the X-server source
                     code (protocol.txt and BuiltInAtoms in the dix directory of the  xorg-server
                     source package).  The entry can contain '*' for wildcard matching or '?' for
                     substitution.  Note that if the '*' is used, then be aware that the order of
                     entries  in  the  file  is important. The '*' on its own is used to ensure a
                     default fallback context is assigned and should be the  last  entry  in  the
                     object_type block.
              context
                     The security context that will be applied to the object.

       Example 1:

       # object_type  object_name  context
       selection      PRIMARY      system_u:object_r:clipboard_xselection_t:s0
       selection      *            system_u:object_r:xselection_t:s0

       Example  2 - This example shows how a client entry can be configured to ensure an entry is
       always found:

       # object_type  object_name  context
       client         *            system_u:object_r:remote_t:s0

NOTES

       1.  Properties and selections are marked as either polyinstantiated or not. For these name
           types,  the  "POLY"  option  searches only the names marked as being polyinstantiated,
           while the other option searches only the names marked as not  being  polyinstantiated.
           Users  of  the interface should check both mappings, optionally taking action based on
           the result (e.g. polyinstantiating the object).

       2.  If contexts are to be validated, then the global option SELABEL_OPT_VALIDATE  must  be
           set  before  calling  selabel_open(3).  If this is not set, then it is possible for an
           invalid context to be returned.

SEE ALSO

       selinux(8), selabel_open(3), selabel_lookup(3), selabel_stats(3), selabel_close(3),
       selinux_set_callback(3), selinux_x_context_path(3), freecon(3), selinux_config(5)