Provided by: syncthing_0.14.43+ds1-6_amd64 
NAME
syncthing-config - Syncthing Configuration
SYNOPSIS
$HOME/.config/syncthing
$HOME/Library/Application Support/Syncthing
%AppData%/Syncthing
%localappdata%/Syncthing
DESCRIPTION
Syncthing uses a single directory to store configuration, crypto keys and index caches.
The location defaults to $HOME/.config/syncthing (Unix-like), $HOME/Library/Application
Support/Syncthing (Mac), %AppData%/Syncthing (Windows XP) or %LocalAppData%/Syncthing
(Windows 7+). It can be changed at runtime using the -home flag. In this directory the
following files are located:
config.xml
The configuration file, in XML format.
cert.pem, key.pem
The device’s RSA public and private key. These form the basis for the device ID.
The key must be kept private.
https-cert.pem, https-key.pem
The certificate and key for HTTPS GUI connections. These may be replaced with a
custom certificate for HTTPS as desired.
index-*.db
A directory holding the database with metadata and hashes of the files currently on
disk and available from peers.
csrftokens.txt
A list of recently issued CSRF tokens (for protection against browser cross site
request forgery).
CONFIG FILE FORMAT
The following shows an example of the default configuration file (IDs will differ):
<configuration version="26">
<folder id="zj2AA-q55a7" label="Default Folder" path="/Users/jb/Sync/" type="readwrite" rescanIntervalS="60" fsWatcherEnabled="false" fsWatcherDelayS="10" ignorePerms="false" autoNormalize="true">
<device id="3LT2GA5-CQI4XJM-WTZ264P-MLOGMHL-MCRLDNT-MZV4RD3-KA745CL-OGAERQZ"></device>
<filesystemType>basic</filesystemType>
<minDiskFree unit="%">1</minDiskFree>
<versioning></versioning>
<copiers>0</copiers>
<pullers>0</pullers>
<hashers>0</hashers>
<order>random</order>
<ignoreDelete>false</ignoreDelete>
<scanProgressIntervalS>0</scanProgressIntervalS>
<pullerPauseS>0</pullerPauseS>
<maxConflicts>-1</maxConflicts>
<disableSparseFiles>false</disableSparseFiles>
<disableTempIndexes>false</disableTempIndexes>
<paused>false</paused>
<weakHashThresholdPct>25</weakHashThresholdPct>
<markerName>.stfolder</markerName>
</folder>
<device id="3LT2GA5-CQI4XJM-WTZ264P-MLOGMHL-MCRLDNT-MZV4RD3-KA745CL-OGAERQZ" name="syno" compression="metadata" introducer="false" skipIntroductionRemovals="false" introducedBy="">
<address>dynamic</address>
<paused>false</paused>
</device>
<gui enabled="true" tls="false" debugging="false">
<address>127.0.0.1:8384</address>
<apikey>k1dnz1Dd0rzTBjjFFh7CXPnrF12C49B1</apikey>
<theme>default</theme>
</gui>
<options>
<listenAddress>default</listenAddress>
<globalAnnounceServer>default</globalAnnounceServer>
<globalAnnounceEnabled>true</globalAnnounceEnabled>
<localAnnounceEnabled>true</localAnnounceEnabled>
<localAnnouncePort>21027</localAnnouncePort>
<localAnnounceMCAddr>[ff12::8384]:21027</localAnnounceMCAddr>
<maxSendKbps>0</maxSendKbps>
<maxRecvKbps>0</maxRecvKbps>
<reconnectionIntervalS>60</reconnectionIntervalS>
<relaysEnabled>true</relaysEnabled>
<relayReconnectIntervalM>10</relayReconnectIntervalM>
<startBrowser>true</startBrowser>
<natEnabled>true</natEnabled>
<natLeaseMinutes>60</natLeaseMinutes>
<natRenewalMinutes>30</natRenewalMinutes>
<natTimeoutSeconds>10</natTimeoutSeconds>
<urAccepted>0</urAccepted>
<urSeen>0</urSeen>
<urUniqueID>LFWe2vn3</urUniqueID>
<urURL>https://data.syncthing.net/newdata</urURL>
<urPostInsecurely>false</urPostInsecurely>
<urInitialDelayS>1800</urInitialDelayS>
<restartOnWakeup>true</restartOnWakeup>
<autoUpgradeIntervalH>12</autoUpgradeIntervalH>
<upgradeToPreReleases>false</upgradeToPreReleases>
<keepTemporariesH>24</keepTemporariesH>
<cacheIgnoredFiles>false</cacheIgnoredFiles>
<progressUpdateIntervalS>5</progressUpdateIntervalS>
<limitBandwidthInLan>false</limitBandwidthInLan>
<minHomeDiskFree unit="%">1</minHomeDiskFree>
<releasesURL>https://upgrades.syncthing.net/meta.json</releasesURL>
<overwriteRemoteDeviceNamesOnConnect>false</overwriteRemoteDeviceNamesOnConnect>
<tempIndexMinBlocks>10</tempIndexMinBlocks>
<trafficClass>0</trafficClass>
<weakHashSelectionMethod>auto</weakHashSelectionMethod>
<stunServer>default</stunServer>
<stunKeepaliveSeconds>24</stunKeepaliveSeconds>
<kcpNoDelay>false</kcpNoDelay>
<kcpUpdateIntervalMs>25</kcpUpdateIntervalMs>
<kcpFastResend>false</kcpFastResend>
<kcpCongestionControl>true</kcpCongestionControl>
<kcpSendWindowSize>128</kcpSendWindowSize>
<kcpReceiveWindowSize>128</kcpReceiveWindowSize>
<defaultFolderPath>~</defaultFolderPath>
<minHomeDiskFreePct>0</minHomeDiskFreePct>
</options>
</configuration>
CONFIGURATION ELEMENT
<configuration version="26">
<folder></folder>
<device></device>
<gui></gui>
<options></options>
<ignoredDevice>5SYI2FS-LW6YAXI-JJDYETS-NDBBPIO-256MWBO-XDPXWVG-24QPUM4-PDW4UQU</ignoredDevice>
<ignoredFolder>bd7q3-zskm5</ignoredDevice>
</configuration>
This is the root element. It has one attribute:
version
The config version. Increments whenever a change is made that requires migration
from previous formats.
It contains the elements described in the following sections and these two additional
child elements:
ignoredDevice
Contains the ID of the device that should be ignored. Connection attempts from this
device are logged to the console but never displayed in the web GUI.
ignoredFolder
Contains the ID of the folder that should be ignored. This folder will always be
skipped when advertised from a remote device, i.e. this will be logged, but there
will be no dialog about it in the web GUI.
FOLDER ELEMENT
<folder id="zj2AA-q55a7" label="Default Folder" path="/Users/jb/Sync/" type="readwrite" rescanIntervalS="60" fsWatcherEnabled="false" fsWatcherDelayS="10" ignorePerms="false" autoNormalize="true">
<device id="3LT2GA5-CQI4XJM-WTZ264P-MLOGMHL-MCRLDNT-MZV4RD3-KA745CL-OGAERQZ"></device>
<filesystemType>basic</filesystemType>
<minDiskFree unit="%">1</minDiskFree>
<versioning></versioning>
<copiers>0</copiers>
<pullers>0</pullers>
<hashers>0</hashers>
<order>random</order>
<ignoreDelete>false</ignoreDelete>
<scanProgressIntervalS>0</scanProgressIntervalS>
<pullerPauseS>0</pullerPauseS>
<maxConflicts>-1</maxConflicts>
<disableSparseFiles>false</disableSparseFiles>
<disableTempIndexes>false</disableTempIndexes>
<paused>false</paused>
<weakHashThresholdPct>25</weakHashThresholdPct>
<markerName>.stfolder</markerName>
</folder>
One or more folder elements must be present in the file. Each element describes one
folder. The following attributes may be set on the folder element:
id The folder ID, must be unique. (mandatory)
label The label of a folder is a human readable and descriptive local name. May be
different on each device, empty, and/or identical to other folder labels.
(optional)
path The path to the directory where the folder is stored on this device; not sent to
other devices. (mandatory)
type Controls how the folder is handled by Syncthing. Possible values are:
readwrite
The folder is in default mode. Sending local and accepting remote changes.
readonly
The folder is in “send-only” mode – it will not be modified by Syncthing on
this device.
rescanIntervalS
The rescan interval, in seconds. Can be set to zero to disable when external
plugins are used to trigger rescans.
fsWatcherEnabled
If enabled this detects changes to files in the folder and scans them.
fsWatcherDelayS
The duration during which changes detected are accumulated, before a scan is
scheduled (only takes effect if fsWatcherEnabled is true).
ignorePerms
True if the folder should ignore permissions.
autoNormalize
Automatically correct UTF-8 normalization errors found in file names.
The following child elements may exist:
device These must have the id attribute and can have an introducedBy attribute,
identifying the device that introduced us to share this folder with the given
device. If the original introducer unshares this folder with this device, our
device will follow and unshare the folder (subject to skipIntroductionRemovals
being false on the introducer device). All mentioned devices are those that will
be sharing the folder in question. Each mentioned device must have a separate
device element later in the file. It is customary that the local device ID is
included in all folders. Syncthing will currently add this automatically if it is
not present in the configuration file.
minDiskFree
The minimum required free space that should be available on the disk this folder
resides. The folder will be stopped when the value drops below the threshold.
Accepted units are %, kB, MB, GB and TB. Set to zero to disable.
versioning
Specifies a versioning configuration.
SEE ALSO:
versioning
copiers, pullers, hashers
The number of copier, puller and hasher routines to use, or zero for the system
determined optimum. These are low level performance options for advanced users
only; do not change unless requested to or you’ve actually read and understood the
code yourself. :)
order The order in which needed files should be pulled from the cluster. The possibles
values are:
random Pull files in random order. This optimizes for balancing resources among the
devices in a cluster.
alphabetic
Pull files ordered by file name alphabetically.
smallestFirst, largestFirst
Pull files ordered by file size; smallest and largest first respectively.
oldestFirst, newestFirst
Pull files ordered by modification time; oldest and newest first
respectively.
ignoreDelete
When set to true, this device will pretend not to see instructions to delete files
from other devices.
scanProgressIntervalS
The interval with which scan progress information is sent to the GUI. Zero means
the default value (two seconds).
pullerPauseS
Tweak for rate limiting the puller when it retries pulling files. Don’t change
these unless you know what you’re doing.
maxConflicts
The maximum number of conflict copies to keep around for any given file. The
default, -1, means an unlimited number. Setting this to zero disables conflict
copies altogether.
disableSparseFiles
By default, blocks containing all zeroes are not written, causing files to be
sparse on filesystems that support the concept. When set to true, sparse files will
not be created.
disableTempIndexes
By default, devices exchange information about blocks available in transfers that
are still in progress. When set to true, such information is not exchanged for this
folder.
paused True if this folder is (temporarily) suspended.
weakHashThresholdPct
Use weak hash if more than the given percentage of the file has changed. Set to -1
to always use weak hash. Default value is 25.
markerName
Name of a directory or file in the folder root to be used as marker-faq. Default is
“.stfolder”.
fsync Deprecated since version v0.14.37.
Transfer updated (from other devices) files to permanent storage before committing
the changes to the internal database.
pullerSleepS
Deprecated since version v0.14.41.
Tweak for rate limiting the puller. Don’t change these unless you know what you’re
doing.
DEVICE ELEMENT
<device id="5SYI2FS-LW6YAXI-JJDYETS-NDBBPIO-256MWBO-XDPXWVG-24QPUM4-PDW4UQU" name="syno" compression="metadata" introducer="false" skipIntroductionRemovals="false" introducedBy="2CYF2WQ-AKZO2QZ-JAKWLYD-AGHMQUM-BGXUOIS-GYILW34-HJG3DUK-LRRYQAR">
<address>dynamic</address>
</device>
<device id="2CYF2WQ-AKZO2QZ-JAKWLYD-AGHMQUM-BGXUOIS-GYILW34-HJG3DUK-LRRYQAR" name="syno local" compression="metadata" introducer="false">
<address>tcp://192.0.2.1:22001</address>
<paused>true<paused>
<allowedNetwork>192.168.0.0/16<allowedNetwork>
</device>
One or more device elements must be present in the file. Each element describes a device
participating in the cluster. It is customary to include a device element for the local
device; Syncthing will currently add one if it is not present. The following attributes
may be set on the device element:
id The device ID. This must be written in canonical form, that is without any spaces
or dashes. (mandatory)
name A friendly name for the device. (optional)
compression
Whether to use protocol compression when sending messages to this device. The
possible values are:
metadata
Compress metadata packets, such as index information. Metadata is usually
very compression friendly so this is a good default.
always Compress all packets, including file data. This is recommended if the
folders contents are mainly compressible data such as documents or text
files.
never Disable all compression.
introducer
Set to true if this device should be trusted as an introducer, i.e. we should copy
their list of devices per folder when connecting.
SEE ALSO:
introducer
skipIntroductionRemovals
Set to true if you wish to follow only introductions and not de-introductions. For
example, if this is set, we would not remove a device that we were introduced to
even if the original introducer is no longer listing the remote device as known.
introducedBy
Defines which device has introduced us to this device. Used only for following
de-introductions.
From following child elements at least one address child must exist.
address
Contains an address or host name to use when attempting to connect to this device.
Entries other than dynamic must be prefixed with tcp:// (dual-stack), tcp4:// (IPv4
only) or tcp6:// (IPv6 only). Note that IP addresses need not use tcp4/tcp6; these
are optional. Accepted formats are:
IPv4 address (tcp://192.0.2.42)
The default port (22000) is used.
IPv4 address and port (tcp://192.0.2.42:12345)
The address and port is used as given.
IPv6 address (tcp://[2001:db8::23:42])
The default port (22000) is used. The address must be enclosed in square
brackets.
IPv6 address and port (tcp://[2001:db8::23:42]:12345)
The address and port is used as given. The address must be enclosed in
square brackets.
Host name (tcp6://fileserver)
The host name will be used on the default port (22000) and connections will
be attempted only via IPv6.
Host name and port (tcp://fileserver:12345)
The host name will be used on the given port and connections will be
attempted via both IPv4 and IPv6, depending on name resolution.
dynamic
The word dynamic (without tcp:// prefix) means to use local and global
discovery to find the device.
paused True if synchronization with this devices is (temporarily) suspended.
allowedNetwork
If given, this restricts connections to this device to only this network (see
allowed-networks).
GUI ELEMENT
<gui enabled="true" tls="false" debugging="false">
<address>127.0.0.1:8384</address>
<apikey>l7jSbCqPD95JYZ0g8vi4ZLAMg3ulnN1b</apikey>
<theme>default</theme>
</gui>
There must be exactly one gui element. The GUI configuration is also used by the rest-api
and the event-api. The following attributes may be set on the gui element:
enabled
If not true, the GUI and API will not be started.
tls If set to true, TLS (HTTPS) will be enforced. Non-HTTPS requests will be redirected
to HTTPS. When this is set to false, TLS connections are still possible but it is
not mandatory.
debugging
This enables profiling and additional debugging endpoints in the rest-api.
The following child elements may be present:
address
Set the listen address. One address element must be present. Allowed address
formats are:
IPv4 address and port (127.0.0.1:8384)
The address and port is used as given.
IPv6 address and port ([::1]:8384)
The address and port is used as given. The address must be enclosed in
square brackets.
Wildcard and port (0.0.0.0:12345, [::]:12345, :12345)
These are equivalent and will result in Syncthing listening on all
interfaces via both IPv4 and IPv6.
user Set to require authentication.
password
Contains the bcrypt hash of the real password.
apikey If set, this is the API key that enables usage of the REST interface.
insecureAdminAccess
If true, this allows access to the web GUI from outside (i.e. not localhost)
without authorization. A warning will displayed about this setting on startup.
theme The name of the theme to use.
OPTIONS ELEMENT
<options>
<listenAddress>default</listenAddress>
<globalAnnounceServer>default</globalAnnounceServer>
<globalAnnounceEnabled>true</globalAnnounceEnabled>
<localAnnounceEnabled>true</localAnnounceEnabled>
<localAnnouncePort>21027</localAnnouncePort>
<localAnnounceMCAddr>[ff12::8384]:21027</localAnnounceMCAddr>
<maxSendKbps>0</maxSendKbps>
<maxRecvKbps>0</maxRecvKbps>
<reconnectionIntervalS>60</reconnectionIntervalS>
<relaysEnabled>true</relaysEnabled>
<relayReconnectIntervalM>10</relayReconnectIntervalM>
<startBrowser>true</startBrowser>
<natEnabled>true</natEnabled>
<natLeaseMinutes>60</natLeaseMinutes>
<natRenewalMinutes>30</natRenewalMinutes>
<natTimeoutSeconds>10</natTimeoutSeconds>
<urAccepted>0</urAccepted>
<urUniqueID></urUniqueID>
<urURL>https://data.syncthing.net/newdata</urURL>
<urPostInsecurely>false</urPostInsecurely>
<urInitialDelayS>1800</urInitialDelayS>
<restartOnWakeup>true</restartOnWakeup>
<autoUpgradeIntervalH>12</autoUpgradeIntervalH>
<keepTemporariesH>24</keepTemporariesH>
<cacheIgnoredFiles>false</cacheIgnoredFiles>
<progressUpdateIntervalS>5</progressUpdateIntervalS>
<limitBandwidthInLan>false</limitBandwidthInLan>
<minHomeDiskFree unit="%">1</minHomeDiskFree>
<releasesURL>https://api.github.com/repos/syncthing/syncthing/releases?per_page=30</releasesURL>
<overwriteRemoteDeviceNamesOnConnect>false</overwriteRemoteDeviceNamesOnConnect>
<tempIndexMinBlocks>10</tempIndexMinBlocks>
<defaultFolderPath>~</defaultFolderPath>
</options>
The options element contains all other global configuration options.
listenAddress
The listen address for incoming sync connections. See Listen Addresses for allowed
syntax.
globalAnnounceServer
A URI to a global announce (discovery) server, or the word default to include the
default servers. Any number of globalAnnounceServer elements may be present. The
syntax for non-default entries is that of a HTTP or HTTPS URL. A number of options
may be added as query options to the URL: insecure to prevent certificate
validation (required for HTTP URLs) and id=<device ID> to perform certificate
pinning. The device ID to use is printed by the discovery server on startup.
globalAnnounceEnabled
Whether to announce this device to the global announce (discovery) server, and also
use it to look up other devices.
localAnnounceEnabled
Whether to send announcements to the local LAN, also use such announcements to find
other devices.
localAnnouncePort
The port on which to listen and send IPv4 broadcast announcements to.
localAnnounceMCAddr
The group address and port to join and send IPv6 multicast announcements on.
maxSendKbps
Outgoing data rate limit, in kibibytes per second.
maxRecvKbps
Incoming data rate limits, in kibibytes per second.
reconnectionIntervalS
The number of seconds to wait between each attempt to connect to currently
unconnected devices.
relaysEnabled
When true, relays will be connected to and potentially used for device to device
connections.
relayReconnectIntervalM
Sets the interval, in minutes, between relay reconnect attempts.
startBrowser
Whether to attempt to start a browser to show the GUI when Syncthing starts.
natEnabled
Whether to attempt to perform a UPnP and NAT-PMP port mapping for incoming sync
connections.
natLeaseMinutes
Request a lease for this many minutes; zero to request a permanent lease.
natRenewalMinutes
Attempt to renew the lease after this many minutes.
natTimeoutSeconds
When scanning for UPnP devices, wait this long for responses.
urAccepted
Whether the user has accepted to submit anonymous usage data. The default, 0, mean
the user has not made a choice, and Syncthing will ask at some point in the future.
-1 means no, a number above zero means that that version of usage reporting has
been accepted.
urSeen The highest usage reporting version that has already been shown in the web GUI.
urUniqueID
The unique ID sent together with the usage report. Generated when usage reporting
is enabled.
urURL The URL to post usage report data to, when enabled.
urPostInsecurely
When true, the UR URL can be http instead of https, or have a self-signed
certificate. The default is false.
urInitialDelayS
The time to wait from startup to the first usage report being sent. Allows the
system to stabilize before reporting statistics.
restartOnWakeup
Whether to perform a restart of Syncthing when it is detected that we are waking
from sleep mode (i.e. a folded up laptop).
autoUpgradeIntervalH
Check for a newer version after this many hours. Set to zero to disable automatic
upgrades.
upgradeToPreReleases
If true, automatical upgrades include release candidates (see release-channels).
keepTemporariesH
Keep temporary failed transfers for this many hours. While the temporaries are
kept, the data they contain need not be transferred again.
cacheIgnoredFiles
Whether to cache the results of ignore pattern evaluation. Performance at the price
of memory. Defaults to false as the cost for evaluating ignores is usually not
significant.
progressUpdateIntervalS
How often in seconds the progress of ongoing downloads is made available to the
GUI.
limitBandwidthInLan
Whether to apply bandwidth limits to devices in the same broadcast domain as the
local device.
minHomeDiskFree
The minimum required free space that should be available on the partition holding
the configuration and index. Accepted units are %, kB, MB, GB and TB.
releasesURL
The URL from which release information is loaded, for automatic upgrades.
alwaysLocalNet
Network that should be considered as local given in CIDR notation.
overwriteRemoteDeviceNamesOnConnect
If set, device names will always be overwritten with the name given by remote on
each connection. By default, the name that the remote device announces will only be
adopted when a name has not already been set.
tempIndexMinBlocks
When exchanging index information for incomplete transfers, only take into account
files that have at least this many blocks.
unackedNotificationID
ID of a notification to be displayed in the web GUI. Will be removed once the user
acknowledged it (e.g. an transition notice on an upgrade).
trafficClass
Specify a type of service (TOS)/traffic class of outgoing packets.
weakHashSelectionMethod
Specify whether weak hashing is used, possible options are WeakHashAlways,
WeakHashNever and WeakHashAuto. Deciding automatically means running benchmarks at
startup to decide whether the performance impact is acceptable (this is the
default).
stunServer
Server to be used for STUN, given as ip:port. The keyword default gets expanded to
stun.callwithus.com:3478, stun.counterpath.com:3478, stun.counterpath.net:3478,
stun.ekiga.net:3478, stun.ideasip.com:3478, stun.internetcalls.com:3478,
stun.schlund.de:3478, stun.sipgate.net:10000, stun.sipgate.net:3478,
stun.voip.aebc.com:3478, stun.voiparound.com:3478, stun.voipbuster.com:3478,
stun.voipstunt.com:3478, stun.voxgratia.org:3478 and stun.xten.com:3478 (this is
the default).
stunKeepaliveSeconds
Interval in seconds between contacting a STUN server to maintain NAT mapping.
Default is 24 and you can set it to 0 to disable contacting STUN servers.
kcpNoDelay, kcpUpdateIntervalMs, kcpFastResend, kcpCongestionControl, kcpSendWindowSize,
kcpReceiveWindowSize
Various KCP tweaking parameters.
defaultFolderPath
The UI will propose to create new folders at this path. This can be disabled by
setting this to an empty string.
relayServer
Deprecated since version v0.13.0: You can now specify custom relay servers with
listenAddress.
Lists one or more relay servers, on the format relay://hostname:port.
Alternatively, a relay list can be loaded over https by using an URL like
dynamic+https://somehost/path. The default loads the list of relays from the relay
pool server, relays.syncthing.net.
pingTimeoutS
Deprecated since version v0.12.0.
Ping-timeout in seconds. Don’t change it unless you are having issues due to slow
response time (slow connection/cpu) and large index exchanges.
pingIdleTimeS
Deprecated since version v0.12.0.
Ping interval in seconds. Don’t change it unless you feel it’s necessary.
Listen Addresses
The following address types are accepted in sync protocol listen addresses:
Default listen addresses (default)
This is equivalent to tcp://0.0.0.0:22000 and
dynamic+https://relays.syncthing.net/endpoint.
TCP wildcard and port (tcp://0.0.0.0:22000, tcp://:22000)
These are equivalent and will result in Syncthing listening on all interfaces, IPv4
and IPv6, on the specified port.
TCP IPv4 wildcard and port (tcp4://0.0.0.0:22000, tcp4://:22000)
These are equivalent and will result in Syncthing listening on all interfaces via
IPv4 only.
TCP IPv4 address and port (tcp4://192.0.2.1:22000)
This results in Syncthing listening on the specified address and port, IPv4 only.
TCP IPv6 wildcard and port (tcp6://[::]:22000, tcp6://:22000)
These are equivalent and will result in Syncthing listening on all interfaces via
IPv6 only.
TCP IPv6 address and port (tcp6://[2001:db8::42]:22000)
This results in Syncthing listening on the specified address and port, IPv6 only.
Static relay address (relay://192.0.2.42:22067?id=abcd123...)
Syncthing will connect to and listen for incoming connections via the specified
relay address.
Todo
Document available URL parameters.
Dynamic relay pool (dynamic+https://192.0.2.42/relays)
Syncthing will fetch the specified HTTPS URL, parse it for a JSON payload
describing relays, select a relay from the available ones and listen via that as if
specified as a static relay above.
Todo
Document available URL parameters.
SYNCING CONFIGURATION FILES
Syncing configuration files between devices (such that multiple devices are using the same
configuration files) can cause issues. This is easy to do accidentally if you sync your
home folder between devices. A common symptom of syncing configuration files is two
devices ending up with the same Device ID.
If you want to use Syncthing to backup your configuration files, it is recommended that
the files you are backing up are in a folder-sendonly to prevent other devices from
overwriting the per device configuration. The folder on the remote device(s) should not be
used as configuration for the remote devices.
If you’d like to sync your home folder in non-send-only mode, you may add the folder that
stores the configuration files to the ignore list. If you’d also like to backup your
configuration files, add another folder in send-only mode for just the configuration
folder.
AUTHOR
The Syncthing Authors
COPYRIGHT
2015, The Syncthing Authors