Provided by: cpl-plugin-uves-doc_5.8.2+dfsg-1_all bug

NAME

       flames_obs_scired - Reduces a FLAMES science image

SYNOPSIS

       esorex flames_obs_scired [OPTIONS] FILE.sof

DESCRIPTION

       Fibre & order position determination procedure: You should feed the recipe with: - science
       fibre images (FIB_SCI_RED, FIB_SCI_SIM_RED, FIB_SCI_SIM_RED) - single fibre images,
       FIB_ORDEF_(REDL|REDU) - master bias frames, MASTER_BIAS_(REDL|REDU) - Fibre order table,
       FIB_ORDEF_TABLE_(REDL|REDU) - Slit flatfield common, SLIT_FF_COM_(REDL|REDU) - Slit
       flatfield norm, SLIT_FF_NOR_(REDL|REDU) - Slit flatfield data, SLIT_FF_DTC_(REDL|REDU) -
       Slit flatfield sigma, SLIT_FF_SGC_(REDL|REDU) - Slit flatfield bad pixel,
       SLIT_FF_BPC_(REDL|REDU) - Slit flatfield boundary, SLIT_FF_BNC_(REDL|REDU) - Fibre
       flatfield common, FIB_FF_COM_(REDL|REDU) - Fibre flatfield norm, FIB_FF_NOR_(REDL|REDU) -
       Fibre flatfield norm sigma, FIB_FF_NSG_(REDL|REDU)

       Products are: - Science fibre info table (FIB_SCI_INFO_TAB) -   XB_SCI_RAW_(REDL|REDU) -
       ERR_XB_SCI_RAW_(REDL|REDU) -   WXB_SCI_RAW_(REDL|REDU) -   ERR_WXB_SCI_RAW_(REDL|REDU) -
       MWXB_SCI_RAW_(REDL|REDU) -   ERR_MWXB_SCI_RAW_(REDL|REDU) -   XB_SCI_(REDL|REDU) -
       ERR_XB_SCI_(REDL|REDU) -   WXB_SCI_(REDL|REDU) -   ERR_WXB_SCI_(REDL|REDU) -
       MWXB_SCI_(REDL|REDU) -   ERR_MWXB_SCI_(REDL|REDU)

OPTIONS

       --debug <bool>
              Whether or not to save intermediate results to local directory (bool; default:
              False). The full name of this option for the EsoRex configuration file is
              uves.debug [default = False].

       --plotter <str>
              Any plots produced by the recipe are redirected to the command specified by this
              parameter. The plotting command must contain the substring ´gnuplot´ and must be
              able to parse gnuplot syntax on its standard input. Valid examples of such a
              command may include ´gnuplot -persist´ and ´cat > mygnuplot$$.gp´. A finer control
              of the plotting options can be obtained by writing an executable script, e.g.
              my_gnuplot.pl, that executes gnuplot after setting the desired gnuplot options
              (e.g. set terminal pslatex color). To turn off plotting, set this parameter to ´no´
              (str; default: ´no´). The full name of this option for the EsoRex configuration
              file is uves.plotter [default = no].

       --process_chip <str>
              For RED arm data process the redl, redu, or both chip(s) (str; default: ´both´).
              The full name of this option for the EsoRex configuration file is uves.process_chip
              [default = both].

       --ext_method <str>
              Extraction method (str; default: ´opt´). The full name of this option for the
              EsoRex configuration file is flames_obs_scired.ext_method [default = opt].

       --cor_max_fnd <str>
              Find correlation maximum? (str; default: ´Y´). The full name of this option for the
              EsoRex configuration file is flames_obs_scired.cor_max_fnd [default = Y].

       --cor_def_rng <float>
              Correlation range size? (float; default: 6.0). The full name of this option for the
              EsoRex configuration file is flames_obs_scired.cor_def_rng [default = 6.0].

       --cor_def_pnt <long>
              Correlation sampling points? (long; default: 25). The full name of this option for
              the EsoRex configuration file is flames_obs_scired.cor_def_pnt [default = 25].

       --cor_def_off <float>
              Correlation center offset? (float; default: 0.0). The full name of this option for
              the EsoRex configuration file is flames_obs_scired.cor_def_off [default = 0.0].

       --corvel_iter <long>
              Velocity correlation iteration number (SimCal) (long; default: 1). The full name of
              this option for the EsoRex configuration file is flames_obs_scired.corvel_iter
              [default = 1].

       --bias_method <str>
              Bias subtraction method (str; default: ´M´). The full name of this option for the
              EsoRex configuration file is flames_obs_scired.bias_method [default = M].

       --bias_value <long>
              Bias value (only if bias_method = V) (long; default: 200). The full name of this
              option for the EsoRex configuration file is flames_obs_scired.bias_value [default =
              200].

       --cubify_sw <str>
              Cubify switch (str; default: ´N´). The full name of this option for the EsoRex
              configuration file is flames_obs_scired.cubify_sw [default = N].

       --filt_sw <str>
              Filter switch (str; default: ´none´). The full name of this option for the EsoRex
              configuration file is flames_obs_scired.filt_sw [default = none].

       --bkg_max_io_win <long>
              Background window number in each full inter order (long; default: 500). The full
              name of this option for the EsoRex configuration file is
              flames_obs_scired.bkg_max_io_win [default = 500].

       --bkg_xy_win_sz_x <long>
              x maximum size of each background window:  (long; default: 6). The full name of
              this option for the EsoRex configuration file is flames_obs_scired.bkg_xy_win_sz_x
              [default = 6].

       --bkg_xy_win_sz_y <long>
              y maximum size of each background window:  (long; default: 2). The full name of
              this option for the EsoRex configuration file is flames_obs_scired.bkg_xy_win_sz_y
              [default = 2].

       --pixel_thresh_max <long>
              Pixel saturation threshold max (long; default: 55000). The full name of this option
              for the EsoRex configuration file is flames_obs_scired.pixel_thresh_max [default =
              55000].

       --pixel_thresh_min <long>
              Pixel saturation threshold min (long; default: -20). The full name of this option
              for the EsoRex configuration file is flames_obs_scired.pixel_thresh_min [default =
              -20].

       --drs_k_s_thre <float>
              Kappa sigma threshold (float; default: 10.0). The full name of this option for the
              EsoRex configuration file is flames_obs_scired.drs_k_s_thre [default = 10.0].

       --drs_base_name <str>
              Base name for science products (str; default: ´fxb´). The full name of this option
              for the EsoRex configuration file is flames_obs_scired.drs_base_name [default =
              fxb].

       --drs_maxyshift <float>
              Half width of the interval to scan for correlation, when determining y shift
              (float; default: 3.0). The full name of this option for the EsoRex configuration
              file is flames_obs_scired.drs_maxyshift [default = 3.0].

       --drs_ext_w_siz <float>
              Integration window size good: 10 (if fibre deconvolution works fine) (float;
              default: 10.0). The full name of this option for the EsoRex configuration file is
              flames_obs_scired.drs_ext_w_siz [default = 10.0].

       --merge <str>
              Order merging method. If ´optimal´, the flux in the overlapping region is set to
              the (optimally computed, using the uncertainties) average of single order spectra.
              If ´sum´, the flux in the overlapping region is computed as the sum of the single
              order spectra. If flat-fielding is done, method ´optimal´ is recommended, otherwise
              ´sum´. (str; default: ´optimal´). The full name of this option for the EsoRex
              configuration file is flames_obs_scired.merge [default = optimal].

       --merge_delt1 <float>
              Order merging left hand (short wavelength) cut. To reduce the amount of order
              overlapping regions we allow to cut short and long wavelength ranges. This may
              reduce the ripple possibly introduced by the order merging. Suggested values are:
              10 (W<=390), 12 (390<W<=437, 520<W<=564), 14 (437<W<=520, 564<W<860), 4 (W>=860)
              (float; default: -1.0). The full name of this option for the EsoRex configuration
              file is flames_obs_scired.merge_delt1 [default = -1.0].

       --merge_delt2 <float>
              Order merging right hand (long wavelength) cut. To reduce the amount of order
              overlapping regions we allow to cut short and long wavelength ranges. This may
              reduce the ripple possibly introduced by the order merging. Suggested values is 4
              for W<860, else 0 (float; default: -1.0). The full name of this option for the
              EsoRex configuration file is flames_obs_scired.merge_delt2 [default = -1.0].

       --clean_tmp_products <bool>
              Input data format (bool; default: False). The full name of this option for the
              EsoRex configuration file is flames_obs_scired.clean_tmp_products [default =
              False].

       --rebin.wavestep <float>
              The bin size (in w.l.u.) in wavelength space. If negative, a step size of 2/3 * (
              average pixel size ) is used. (float; default: -1.0). The full name of this option
              for the EsoRex configuration file is flames_obs_scired.rebin.wavestep [default =
              -1.0].

       --rebin.scale <bool>
              Whether or not to multiply by the factor dx/dlambda (pixels per wavelength) during
              the rebinning. This option is disabled as default in concordance with the method
              used in the MIDAS pipeline. This option should be set to true to convert the
              observed flux (in pixel-space) to a flux per wavelength (in wavelength-space).
              (bool; default: False). The full name of this option for the EsoRex configuration
              file is flames_obs_scired.rebin.scale [default = False].

       Note that it is possible to create a configuration file containing these options, along
       with suitable default values. Please refer to the details provided by the 'esorex --help'
       command.

SEE ALSO

       The full documentation for the uves pipeline can be downloaded as a PDF file using the
       following URL:

              ftp://ftp.eso.org/pub/dfs/pipelines/uves/uves-pipeline-manual-5.8.2.pdf

       An overview over the existing ESO pipelines can be found on the web page
       http://www.eso.org/sci/software/pipelines/.

       Basic documentation about the EsoRex program can be found at the esorex (1) man page.

       It is possible to call the pipelines from python using the python-cpl package.  See
       http://packages.python.org/python-cpl/index.html for further information.

       The other recipes of the uves pipeline are flames_cal_mkmaster(7), flames_cal_orderpos(7),
       flames_cal_predict(7), flames_cal_prep_sff_ofpos(7), flames_cal_wavecal(7),
       flames_obs_redchain(7), flames_utl_unpack(7), uves_cal_cd_align(7), uves_cal_mbias(7),
       uves_cal_mdark(7), uves_cal_mflat(7), uves_cal_mflat_combine(7), uves_cal_mkmaster(7),
       uves_cal_orderpos(7), uves_cal_predict(7), uves_cal_response(7), uves_cal_tflat(7),
       uves_cal_wavecal(7), uves_obs_redchain(7), uves_obs_scired(7), uves_utl_ima_arith(7),
       uves_utl_remove_crh_single(7)

VERSION

       flames_obs_scired 5.8.2

AUTHOR

       Andrea Modigliani <cpl@eso.org>

BUG REPORTS

       Please report any problems to cpl@eso.org. Alternatively, you may send a report to the ESO
       User Support Department <usd-help@eso.org>.

LICENSE

       This file is part of the FLAMES/UVES Pipeline Copyright (C) 2004, 2005, 2006, 2007
       European Southern Observatory

       This program is free software; you can redistribute it and/or modify it under the terms of
       the GNU General Public License as published by the Free Software Foundation; either
       version 2 of the License, or (at your option) any later version.

       This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
       without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
       See the GNU General Public License for more details.

       You should have received a copy of the GNU General Public License along with this program;
       if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
       MA  02111-1307  USA