Provided by: fence-agents_4.0.25-2ubuntu1.3_amd64 bug

NAME

       fence_ilo_moonshot - Fence agent for HP Moonshot iLO

DESCRIPTION

       fence_ilo_moonshot accepts options on the command line as well as from stdin. Fenced sends
       parameters through stdin when it execs the agent. fence_ilo_moonshot can be run by  itself
       with  command  line options.  This is useful for testing and for turning outlets on or off
       from scripts.

       Vendor URL: http://www.hp.com

PARAMETERS


       -o, --action=[action]
              Fencing action (Default Value: reboot)

       -c, --command-prompt=[prompt]
              Force Python regex for command prompt (Default Value: ['MP>', 'hpiLO->'])

       -k, --identity-file=[filename]
              Identity file (private key) for SSH

       -4, --inet4-only
              Forces agent to use IPv4 addresses only

       -6, --inet6-only
              Forces agent to use IPv6 addresses only

       -a, --ip=[ip]
              IP address or hostname of fencing device This parameter is always required.

       -u, --ipport=[port]
              TCP/UDP  port  to  use  for  connection with device (Default Value: 22)

       -p, --password=[password]
              Login password or passphrase

       -S, --password-script=[script]
              Script to run to retrieve password

       -n, --plug=[id]
              Physical plug number on device, UUID or identification of machine This parameter is
              always required.

       -x, --ssh
              Use SSH connection (Default Value: 1)

       --ssh-options=[options]
              SSH options to use

       -l, --username=[name]
              Login name This parameter is always required.

       -q, --quiet
              Disable  logging to stderr. Does not affect --verbose or --debug logging to syslog.

       -v, --verbose
              Verbose mode

       -D, --debug-file=[debugfile]
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       -C, --separator=[char]
              Separator for CSV created by 'list' operation (Default Value: ,)

       --delay=[seconds]
              Wait X seconds before fencing is started (Default Value: 0)

       --login-timeout=[seconds]
              Wait X seconds for cmd prompt after login (Default Value: 5)

       --power-timeout=[seconds]
              Test X seconds for status change after ON/OFF (Default Value: 20)

       --power-wait=[seconds]
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       --shell-timeout=[seconds]
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       --retry-on=[attempts]
              Count of attempts to retry power on (Default Value: 1)

       --ssh-path=[path]
              Path to ssh binary (Default Value: /usr/bin/ssh)

ACTIONS


       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       list   List available plugs with aliases/virtual machines if there  is  support  for  more
              then one device. Returns N/A otherwise.

       list-status
              List  available plugs with aliases/virtual machines and their power state if it can
              be obtained without additional commands.

       monitor
              Check the health of fence device

       metadata
              Display the XML metadata describing this resource.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS


       action Fencing action (Default Value: reboot)

       command_prompt
              Force  Python  regex  for  command  prompt  (Default  Value:  ['MP>',   'hpiLO->'])
              Obsoletes: cmd_prompt

       identity_file
              Identity file (private key) for SSH

       inet4_only
              Forces agent to use IPv4 addresses only

       inet6_only
              Forces agent to use IPv6 addresses only

       ip     IP  address  or  hostname  of  fencing  device  This  parameter is always required.
              Obsoletes: ipaddr

       ipport TCP/UDP port to use for connection with device  (Default  Value:  22)

       password
              Login password or passphrase Obsoletes: passwd

       password_script
              Script to run to retrieve password Obsoletes: passwd_script

       plug   Physical plug number on device, UUID or identification of machine This parameter is
              always required. Obsoletes: port

       ssh    Use SSH connection (Default Value: 1) Obsoletes: secure

       ssh_options
              SSH options to use

       username
              Login name This parameter is always required. Obsoletes: login

       quiet  Disable logging to stderr. Does not affect --verbose or --debug logging to  syslog.

       verbose
              Verbose mode

       debug_file
              Write debug information to given file Obsoletes: debug

       version
              Display version information and exit

       help   Display help and exit

       separator
              Separator for CSV created by 'list' operation (Default Value: ,)

       delay  Wait X seconds before fencing is started (Default Value: 0)

       login_timeout
              Wait X seconds for cmd prompt after login (Default Value: 5)

       power_timeout
              Test X seconds for status change after ON/OFF (Default Value: 20)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       shell_timeout
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       retry_on
              Count of attempts to retry power on (Default Value: 1)

       ssh_path
              Path to ssh binary (Default Value: /usr/bin/ssh)