Provided by: ipmiutil_3.0.7-1build1_amd64 bug

NAME

       ipmiutil_hpm - PICMG HPM.1 Upgrade Agent

SYNOPSIS

       ipmiutil hpm [-mxNUPREFJTVY] parameters

DESCRIPTION

       This ipmiutil hpm subcommand updates HPM components using PICMG HPM.1 file

       This  utility can use either the /dev/ipmi0 driver from OpenIPMI, the /dev/imb driver from
       Intel, the /dev/ipmikcs driver from valinux,  direct  user-space  IOs,  or  the  IPMI  LAN
       interface if -N.

OPTIONS

       Command line options are described below.

       -m 002000
              Target a specific MC (e.g. bus 00, sa 20, lun 00).  This could be used for PICMG or
              ATCA blade systems.  The trailing character, if present, indicates  SMI  addressing
              if 's', or IPMB addressing if 'i' or not present.

       -x     Causes extra debug messages to be displayed.

       -N nodename
              Nodename  or  IP  address of the remote target system.  If a nodename is specified,
              IPMI LAN interface is used.  Otherwise the local  system  management  interface  is
              used.

       -U rmt_user
              Remote username for the nodename given.  The default is a null username.

       -P/-R rmt_pswd
              Remote password for the nodename given.  The default is a null password.

       -E     Use the remote password from Environment variable IPMI_PASSWORD.

       -F drv_t
              Force  the  driver  type  to one of the followng: imb, va, open, gnu, landesk, lan,
              lan2, lan2i, kcs, smb.  Note that lan2i means lan2 with intelplus.  The default  is
              to detect any available driver type and use it.

       -J     Use   the   specified   LanPlus   cipher   suite  (0  thru  17):  0=none/none/none,
              1=sha1/none/none,   2=sha1/sha1/none,   3=sha1/sha1/cbc128,   4=sha1/sha1/xrc4_128,
              5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40.  Default is 3.

       -T     Use  a  specified  IPMI  LAN  Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight
              Password, 5=OEM.

       -V     Use  a  specified  IPMI  LAN  privilege  level.  1=Callback  level,  2=User  level,
              3=Operator level, 4=Administrator level (default), 5=OEM level.

       -Y     Yes,  do  prompt  the  user for the IPMI LAN remote password.  Alternatives for the
              password are -E or -P.

PARAMETERS

       hpm parameters

              check
                     Check the target information.

              check filename
                     Display both the existing target version and image version on the screen.

              download filename
                     Download specified firmware.

              upgrade filename [all] [component x] [activate]
                     Upgrade the firmware using a  valid  HPM.1  image  file.  If  no  option  is
                     specified,  the  firmware  versions  are  checked  first and the firmware is
                     upgraded only if they are different.

                     all
                            Upgrade all components even if the firmware  versions  are  the  same
                            (use this only after using "check" command).

                     component x
                            Upgrade only given component from the given file.
                            component 0 - BOOT
                            component 1 - RTK

                     activate
                            Activate new firmware right away.

              activate
                     Activate the newly uploaded firmware.

              targetcap
                     Get the target upgrade capabilities.

              compprop id opt
                     Get the specified component properties. Valid component id: 0-7.  Opt can be
                     one of following:
                     0 - General properties
                     1 - Current firmware version
                     2 - Description string
                     3 - Rollback firmware version
                     4 - Deferred firmware version

              abort
                     Abort the on-going firmware upgrade.

              upgstatus
                     Show status of the last long duration command.

              rollback
                     Perform manual rollback on the IPM Controller firmware.

              rollbackstatus
                     Show the rollback status.

              selftestresult
                     Query the self test results.

EXAMPLES

       ipmiutil hpm targetcap
       Gets HPM target capabilities

       ipmiutil hpm -N 192.168.1.1 -U root -P pswd download firmware.img
       Downloads the HPM firmware version contained in firmware.img over IPMI LAN.

SEE ALSO

       ipmiutil(8) ialarms(8) iconfig(8) idiscover(8) ievents(8) ifru(8) igetevent(8)  ihealth(8)
       ilan(8) ireset(8) isel(8) isensor(8) iserial(8) isol(8) iwdt(8)

WARNINGS

       See  http://ipmiutil.sourceforge.net/  for  the latest version of ipmiutil and any bug fix
       list.

COPYRIGHT

       Copyright (C) 2010  Kontron America, Inc.

       See the file COPYING in the distribution for more details regarding redistribution.

       This utility is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY.

AUTHOR

       Andy Cress <arcress at users.sourceforge.net>

                                     Version 1.0: 25 Aug 2010                             IHPM(8)