Provided by: radvd_2.16-3_amd64 bug

NAME

       radvd - router advertisement daemon for IPv6

SYNOPSIS

       radvd  [  -hsvc ] [ -d debuglevel ] [ -C configfile ] [ -p pidfile ] [ -m logmethod ] [ -l
       logfile ] [ -f facility ] [ -t chrootdir ] [ -u username ]

DESCRIPTION

       radvd is the router advertisement daemon for IPv6. It listens to router solicitations  and
       sends  router  advertisements as described in "Neighbor Discovery for IP Version 6 (IPv6)"
       (RFC 4861).  With these advertisements hosts can automatically configure  their  addresses
       and  some other parameters. It also defines "Neighbor Discovery Optimization for IPv6 over
       Low-Power Wireless Personal Area Networks (6LoWPANs)" (RFC6775).  They also can  choose  a
       default router based on these advertisements.

       The  configuration  file  must  not  be  writable  by others, and if non-root operation is
       requested, not even by self/own group.

OPTIONS

       For every one character option there is also a long option, which is listed right next  to
       the "short" option name:

       -v, --version
              Displays the version of radvd and then aborts.

       -h, --help
              Displays a short usage description and then aborts.

       -c, --configtest
              Test configuration and do startup tests and then exit.

       -d debuglevel, --debug debuglevel
              With  this  option  you  turn  on  debugging information. The debugging level is an
              integer in the range from 1 to 5, from  quiet to very verbose. A debugging level of
              0  completely  turns  off  debugging.  If a debugging level greater than 0 is used,
              radvd doesn't background itself on start. The default debugging level is 0.

       -C configfile, --config configfile
              Specifies  an  alternate  config   file.   Normally   the   compiled   in   default
              /etc/radvd.conf is used.

       -p pidfile, --pidfile pidfile
              Specifies an alternate pidfile. Normally the compiled in default /var/run/radvd.pid
              is used.

       -m method, --logmethod method
              Specifies the logging method to use. Possibly values are:

              none   Completely disables any logging.

              logfile
                     Logs to the logfile which is specified by the -l option. If  no  logfile  is
                     specified  on the command line, then a compiled in default is used (see next
                     option).

              stderr Logs to standard error.

              stderr_syslog
                     Logs only the high messages (of  at  least  LOG_ERR  priority)  to  standard
                     error, and everything to syslog (default method).

              syslog Logs to syslog.

       -l logfile, --logfile logfile
              Specifies  the  logfile  to use when using the logging method logfile.  The default
              logfile is /var/log/radvd.log.

       -f facility, --facility facility
              Specifies the facility (as an  integer)  when  using  syslog  logging.  Default  is
              LOG_DAEMON.

       -t chrootdir, --chrootdir chrootdir
              If specified, switches to chrootdir before doing anything else.  This directory and
              its subdirectories must have been populated first.  For security reasons,  -u  must
              always be used when using chrootdir.

              Note  that  on  Linux  radvd requires access to the /proc filesystem, so it is more
              challenging to set up the chroot environment.

       -u username, --username username
              If specified, drops root privileges and changes user ID to username and group ID to
              the  primary  group  of  username.   This is recommended for security reasons.  You
              might also need to use -p to point to a file  in  a  username  -writable  directory
              (e.g. /var/run/radvd/radvd.pid).

FILES

       /usr/sbin/radvd
       /etc/radvd.conf
       /var/run/radvd.pid
       /var/log/radvd.log

BUGS

       There  certainly  are some bugs. If you find them or have other suggestions please contact
       Reuben Hawkins <reubenhwk@gmail.com>.

SEE ALSO

       radvd.conf(5), radvdump(8)

AUTHORS

       Pedro Roque    <roque@di.fc.ul.pt> - wrote first version for Linux
       Lars Fenneberg <lf@elemental.net>  - previous maintainer
       Nathan Lutchansky   <lutchann@litech.org>    - previous maintainer
       Pekka Savola   <pekkas@netcore.fi>     - previous maintainer
       Craig Metz     <cmetz@inner.net>   - port to NRL's IPv6 code for BSD4.4
       Marko Myllynen <myllynen@lut.fi>   - RFC 2461 update, Mobile IPv6 support
       Jim Paris <jim@jtan.com>      - Privilege separation support
       Reuben Hawkins  <reubenhwk@gmail.com>   - current maintainer
       Pierre Ossman   <pierre@ossman.eu>      - RFC6106 (DNSSL) support
       Varka Bhadram  <varkabhadram@gmail.com> - 6LoWPAN-ND (RFC6775) support
       Robin H. Johnson    <robbat2@gentoo.org>     - RA splitting per RFC 6980 & RFC4861#6.2.3