Provided by: netdiag_1.2-1_amd64 bug

NAME

       tcpblast - tool for measuring network bandwidth

SYNOPSIS

       tcpblast [options] destination[:port]

DESCRIPTION

       tcpblast/udpblast is a simple tool for probing network and estimating its throughput. By
       default it sends 300 blocks (1024 bytes each) of data to specified destination host.

       Destination can be name or address, IPv4 or IPv6. When IPv6 address is specified with port
       it should look like: '[3ffe:8010::1]:9' (with single quotes to prevent shell expansion of
       []).

       Options

       -4, --ipv4           use only ipv4 address

       -6, --ipv6           use only ipv6 address

       -a                   send random data

       -b BUF_SIZE          socket buf size (default: -1, don't change), with `-' to be
       substracted from results

       -c, --count BLOCKS   change default (300) number of blocks, range: 1..10000000

       -d DOTFREQ           print dot every DOTFREQ blocks, disables cont. speed disp.

       -h, --help           this help

       -i, --delay DELAY    write delay in microseconds (EXPERIMENTAL)

       -l, --last BLKS      show also speed for last BLKS blocks

       -m                   results for every block in separate line

       -n, --nwrite         do not write, use e.g. with chargen port

       -o                   switch from continuous speed displaying to dots printing

       -p PORT              bind this local PORT

       -q --quiet           show only final statistics

       -r, --read           read data returned to us, switches default port to echo

       -R, --rate RATESPEC  limit the speed according to the RATESPEC

       -s BLOCK_SIZE        block size (default 1024 bytes)

       -t MAXTIME           limit time to MAXTIME (up to 42950 h)

           --tcp            use TCP (default)

           --udp            use UDP (default if named udpblast)

       -v, --verbosity      verbosity, default 0, maximum 3. -v adds time display, -vv also speed
       in B/s, -v - speed in b/s.

       -V, --version        version

       destination          host name or address

       port                 use port #/name xyz instead of default port 9

       RATESPEC         RATE[,TIME][:RATE[,TIME]]...  RATE             generating data at RATE
       speed in B/s TIME             for TIME seconds (can be floating point number), last can
                          be omitted and that time will be infinite

       Options -b, -c, -R, -s and -t can use case insensitive unit multipliers and specifiers:
         size (bytes):
           -b and -s argument without units is in bytes, can use [{k,m,g}]b (lower
           or upper case) for KB, MB or GB. {k,m,g} are powers of 1024.
         number:
           -c argument is just a number, can have k, m or g added (powers of 1024),
           no unit needed
         rate (bytes pes second):
           -R RATE is in B/s or Bps, the postfixes can be [{k,m,g}]{b/s,bps}
         time (seconds):
           -t and -R TIME argument is in seconds, can be postfixed with
           [{k,m,g}]{s,min,h,w,m,y}

       Example:
         tcpblast -b 4KB -c 10k -R 10kbps,2:20kbps,3s target

       tcpblast version: FreeBSD + rzm 20001030

BUGS

       Rafal says that he is a perfectly bad and careless maintainer  :)

       If You found any other bugs send it to him.

AUTHORS

       Software: dfk@nic.eu.net (Daniel Karrenberg - acc. to FreeBSD version)

       Maintained by: Rafal Maszkowski <rzm@icm.edu.pl>

       Manual page: Artur R. Czechowski <arturcz@bofh.org.pl>, Oct 1999; rzm, Oct 2000