Provided by: altos_1.8.6-1_amd64 bug

NAME

       ao-rawload - flash a program to a AltOS device

SYNOPSIS

       ao-rawload  [-T  tty-device]  [--tty tty-device] [-D altos-device] [--device altos-device]
       file.ihx

DESCRIPTION

       ao-rawload loads the specified .ihx file, without modification,  into  the  target  device
       flash or ram (depending on the base address of the .ihx file).

OPTIONS

       -T tty-device | --tty tty-device
              This  selects  which  tty  device  the debugger uses to communicate with the target
              device. The special name 'BITBANG' directs ao-dbg to  use  the  cp2103  connection,
              otherwise  this  should  be  a usb serial port connected to a suitable cc1111 debug
              node.

       -D AltOS-device | --device AltOS-device
              Search for a connected device. This requires an argument of one  of  the  following
              forms:

              TeleMetrum:2
              TeleMetrum
              2

              Leaving  out  the  product  name  will cause the tool to select a suitable product,
              leaving out the serial number will cause the tool to match  one  of  the  available
              devices.

       -r | --run
              After  the  file  has  been loaded, set the PC to the base address of the image and
              resume execution there.  the .ihx file.

USAGE

       ao-rawload reads the specified .ihx file into memory. It then connects  to  the  specified
       target  device  and writes the program to the target device memory and, optionally, starts
       the program executing.

AUTHOR

       Keith Packard

                                            ao-rawload                              AO-RAWLOAD(1)