Provided by: dpkg_1.19.0.5ubuntu5_amd64 bug

NAME

       dpkg-maintscript-helper - works around known dpkg limitations in maintainer scripts

SYNOPSIS

       dpkg-maintscript-helper command [parameter...] -- maint-script-parameter...

COMMANDS AND PARAMETERS

       supports command

       rm_conffile conffile [prior-version [package]]

       mv_conffile old-conffile new-conffile [prior-version [package]]

       symlink_to_dir pathname old-target [prior-version [package]]

       dir_to_symlink pathname new-target [prior-version [package]]

DESCRIPTION

       This  program  is  designed to be run within maintainer scripts to achieve some tasks that
       dpkg can't (yet) handle natively either because of design  decisions  or  due  to  current
       limitations.

       Many  of those tasks require coordinated actions from several maintainer scripts (preinst,
       postinst, prerm, postrm). To avoid mistakes the same call simply needs to be  put  in  all
       scripts  and  the  program will automatically adapt its behaviour based on the environment
       variable DPKG_MAINTSCRIPT_NAME and on the maintainer scripts arguments that  you  have  to
       forward after a double hyphen.

COMMON PARAMETERS

       prior-version
              Defines  the  latest  version  of  the  package  whose  upgrade  should trigger the
              operation. It is  important  to  calculate  prior-version  correctly  so  that  the
              operations  are  correctly  performed  even  if the user rebuilt the package with a
              local version. If prior-version is empty or omitted, then the operation is tried on
              every  upgrade  (note:  it's safer to give the version and have the operation tried
              only once).

              If the conffile has not  been  shipped  for  several  versions,  and  you  are  now
              modifying  the  maintainer  scripts  to  clean  up the obsolete file, prior-version
              should be based on the version of the package that you are now preparing,  not  the
              first  version  of  the package that lacked the conffile. This applies to all other
              actions in the same way.

              For example, for a conffile removed in version 2.0-1 of  a  package,  prior-version
              should  be  set  to  2.0-1~. This will cause the conffile to be removed even if the
              user rebuilt the previous version 1.0-1 as 1.0-1local1. Or a  package  switching  a
              path  from  a symlink (shipped in version 1.0-1) to a directory (shipped in version
              2.0-1), but only performing the actual switch in the maintainer scripts in  version
              3.0-1, should set prior-version to 3.0-1~.

       package
              The  package  name  owning the pathname(s).  When the package is “Multi-Arch: same”
              this parameter must include the architecture qualifier,  otherwise  it  should  not
              usually  include  the architecture qualifier (as it would disallow cross-grades, or
              switching from being architecture specific to architecture all or vice versa).   If
              the   parameter   is   empty   or   omitted,   the   DPKG_MAINTSCRIPT_PACKAGE   and
              DPKG_MAINTSCRIPT_ARCH environment variables  (as  set  by  dpkg  when  running  the
              maintainer scripts) will be used to generate an arch-qualified package name.

       --     All  the  parameters  of the maintainer scripts have to be forwarded to the program
              after --.

CONFFILE RELATED TASKS

       When upgrading a package, dpkg will not automatically remove a conffile  (a  configuration
       file  for  which  dpkg  should  preserve  user  changes) if it is not present in the newer
       version. There are two principal reasons for this; the first is that the conffile could've
       been  dropped by accident and the next version could restore it, users wouldn't want their
       changes thrown away.  The  second  is  to  allow  packages  to  transition  files  from  a
       dpkg-maintained conffile to a file maintained by the package's maintainer scripts, usually
       with a tool like debconf or ucf.

       This means that if a package  is  intended  to  rename  or  remove  a  conffile,  it  must
       explicitly  do  so  and dpkg-maintscript-helper can be used to implement graceful deletion
       and moving of conffiles within maintainer scripts.

   Removing a conffile
       If a conffile is completely removed, it should be removed from disk, unless the  user  has
       modified  it.  If  there are local modifications, they should be preserved. If the package
       upgrades aborts, the newly obsolete conffile should not disappear.

       All of this is implemented by putting the following shell snippet in the preinst, postinst
       and postrm maintainer scripts:

           dpkg-maintscript-helper rm_conffile \
               conffile prior-version package -- "$@"

       conffile is the filename of the conffile to remove.

       Current implementation: in the preinst, it checks if the conffile was modified and renames
       it either to  conffile.dpkg-remove  (if  not  modified)  or  to  conffile.dpkg-backup  (if
       modified).  In  the postinst, the latter file is renamed to conffile.dpkg-bak and kept for
       reference as it contains user modifications but the former will be removed. If the package
       upgrade aborts, the postrm reinstalls the original conffile. During purge, the postrm will
       also delete the .dpkg-bak file kept up to now.

   Renaming a conffile
       If a conffile is moved from one location to another, you need to make sure you move across
       any  changes  the  user  has  made. This may seem a simple change to the preinst script at
       first, however that will result in the user being prompted by dpkg to approve the conffile
       edits even though they are not responsible of them.

       Graceful  renaming  can  be  implemented  by  putting  the  following shell snippet in the
       preinst, postinst and postrm maintainer scripts:

           dpkg-maintscript-helper mv_conffile \
               old-conffile new-conffile prior-version package -- "$@"

       old-conffile and new-conffile are the old and new name of the conffile to rename.

       Current implementation: the preinst checks if the conffile has been modified, if yes  it's
       left  on  place  otherwise it's renamed to old-conffile.dpkg-remove. On configuration, the
       postinst removes old-conffile.dpkg-remove and renames old-conffile to new-conffile if old-
       conffile  is  still  available.  On  abort-upgrade/abort-install,  the postrm renames old-
       conffile.dpkg-remove back to old-conffile if required.

SYMLINK AND DIRECTORY SWITCHES

       When upgrading a package, dpkg will not automatically switch a symlink to a  directory  or
       vice-versa. Downgrades are not supported and the path will be left as is.

   Switching a symlink to directory
       If  a symlink is switched to a real directory, you need to make sure before unpacking that
       the symlink is removed. This may seem a simple change to  the  preinst  script  at  first,
       however  that  will  result  in  some problems in case of admin local customization of the
       symlink or when downgrading the package.

       Graceful renaming can be implemented  by  putting  the  following  shell  snippet  in  the
       preinst, postinst and postrm maintainer scripts:

           dpkg-maintscript-helper symlink_to_dir \
               pathname old-target prior-version package -- "$@"

       pathname  is the absolute name of the old symlink (the path will be a directory at the end
       of the installation) and old-target is the target name of the former symlink at  pathname.
       It can either be absolute or relative to the directory containing pathname.

       Current implementation: the preinst checks if the symlink exists and points to old-target,
       if not then it's left  in  place,  otherwise  it's  renamed  to  pathname.dpkg-backup.  On
       configuration,  the postinst removes pathname.dpkg-backup if pathname.dpkg-backup is still
       a symlink. On abort-upgrade/abort-install, the postrm renames pathname.dpkg-backup back to
       pathname if required.

   Switching a directory to symlink
       If  a real directory is switched to a symlink, you need to make sure before unpacking that
       the directory is removed. This may seem a simple change to the preinst  script  at  first,
       however  that  will  result  in  some  problems  in case the directory contains conffiles,
       pathnames owned by other packages, locally created  pathnames,  or  when  downgrading  the
       package.

       Graceful  switching  can  be  implemented  by  putting  the following shell snippet in the
       preinst, postinst and postrm maintainer scripts:

           dpkg-maintscript-helper dir_to_symlink \
               pathname new-target prior-version package -- "$@"

       pathname is the absolute name of the old directory (the path will be a symlink at the  end
       of  the  installation) and new-target is the target of the new symlink at pathname. It can
       either be absolute or relative to the directory containing pathname.

       Current implementation: the preinst checks if  the  directory  exists,  does  not  contain
       conffiles,  pathnames  owned  by other packages, or locally created pathnames, if not then
       it's left in place, otherwise it's renamed to pathname.dpkg-backup, and an  empty  staging
       directory  named  pathname  is  created,  marked with a file so that dpkg can track it. On
       configuration, the postinst  finishes  the  switch  if  pathname.dpkg-backup  is  still  a
       directory  and  pathname  is  the staging directory; it removes the staging directory mark
       file, moves the newly created files inside the staging directory  to  the  symlink  target
       new-target/,  replaces  the  now  empty  staging directory pathname with a symlink to new-
       target, and  removes  pathname.dpkg-backup.  On  abort-upgrade/abort-install,  the  postrm
       renames pathname.dpkg-backup back to pathname if required.

INTEGRATION IN PACKAGES

       When  using  a  packaging  helper,  please  check if it has native dpkg-maintscript-helper
       integration, which might make your life easier. See for example dh_installdeb(1).

       Given that dpkg-maintscript-helper is  used  in  the  preinst,  using  it  unconditionally
       requires  a  pre-dependency  to ensure that the required version of dpkg has been unpacked
       before. The required version depends on the command used, for rm_conffile and  mv_conffile
       it is 1.15.7.2, for symlink_to_dir and dir_to_symlink it is 1.17.14:

           Pre-Depends: dpkg (>= 1.17.14)

       But  in  many cases the operation done by the program is not critical for the package, and
       instead of using a pre-dependency we can call  the  program  only  if  we  know  that  the
       required command is supported by the currently installed dpkg:

           if dpkg-maintscript-helper supports command; then
               dpkg-maintscript-helper command ...
           fi

       The  command  supports  will  return  0 on success, 1 otherwise. The supports command will
       check if the environment variables as set by dpkg and required by the script are  present,
       and will consider it a failure in case the environment is not sufficient.

SEE ALSO

       dh_installdeb(1).