Provided by: printer-driver-foo2zjs-common_20171202dfsg0-1_all bug


       foo2hbpl2 - Convert Ghostscript pbmraw or bitcmyk format into a ZJS printer stream


       foo2hbpl2 [options] <pbmraw-file >hbpl2-file

       foo2hbpl2 [options] <bitcmyk-file >hbpl2-file

       foo2hbpl2 [options] <pksmraw-file >hbpl2-file


       foo2hbpl2 converts Ghostscript pbmraw, bitcmyk, or pksmraw output formats to monochrome or
       color HBPL version 2 streams, for driving the Dell 1355, Dell C1765, Epson AcuLaser M1400,
       Epson  AcuLaser CX17NF, Fuji Xerox DocuPrint CM205, Fuji Xerox DocuPrint CM215, Fuji Xerox
       DocuPrint M215, Fuji Xerox DocuPrint P205, Xerox Phaser 3010,  Xerox  Phaser  3040,  Xerox
       WorkCentre 3045 MFP, and Xerox WorkCentre 6015 MFP printers.


   Normal Options
       These  are  the  options  used  to  select  the parameters of a print job that are usually
       controlled on a per job basis.

       -c     Force color mode if autodetect doesn't work.

       -d duplex
              Duplex code to send to printer [1].
              │        │               │
              │1   off │ 2   long edge │ 3   short edge

       -g xpixxypix
              Set page dimensions in pixels [10200x6600].

       -m media
              Media code to send to printer [1].

              Media       HBPL
              plain          1
              bond           2
              lwcard         3
              lwgcard        4
              labels         5
              envelope       6
              recycled       7
              plain2         8
              bond2          9
              lwcard2       10
              lwgcard2      11
              recycled2     12

       -p paper
              Paper code to send to printer [1].

              Paper                  HBPL
              A4                        1

              B5jis                     2
              A5                        3
              letter                    4
              executive                 5
              fanfold german legal      6
              folio                     6
              legal                     7
              env#10                    9
              envMonarch               10
              envC5                    11
              envDL                    12

       -n copies
              Number of copies [1].

       -r xresxyres
              Set device resolution in pixels/inch [1200x600].

       -s source
              Source (InputSlot) code to send to printer [7].
              │          │
              │1   upper │ 4   manual
              │2   lower │ 7   auto

       -t     Draft mode.  Every other pixel is white.

       -J filename
              Filename string to send to printer.

       -U username
              Username string to send to printer.

   Printer Tweaking Options
       These are the options used to customize  the  operation  of  foo2hbpl2  for  a  particular

       -u xoffxyoff
              Set  the offset of the start of the printable region from the upper left corner, in
              pixels [0x0].

       -l xoffxyoff
              Set the offset of the end of the printable region from the lower right  corner,  in
              pixels [0x0].

       -L mask
              Send logical clipping amounts implied by -u/-l in the ZjStream [3].

              0   don't send any logical clipping amounts
              1   only send Y clipping amount
              2   only send X clipping amount
              3   send both X and Y clipping amounts

       -P     Do  not  send  START_PLANE codes on monochrome output.  May be needed by some black
              and white only printers, such as the HP LaserJet 1000.

       -A     AllIsBlack: convert C=1,M=1,Y=1 to just K=1.  Works with bitcmyk input only.

       -B     BlackClears: K=1 forces C,M,Y to 0.  Works with bitcmyk input only.

       -X padlen
              Add extra zero padding to the end of  BID  segments.   The  default  is  16  bytes.
              Padding  16  bytes  of  zeroes  is  needed for older ZjStream printers, such as the
              Minolta 2200DL and HP LaserJet 1000, and seems harmless to newer ones, such as  the
              Minolta 2300DL.  So the default should be good for all cases.

   Debugging Options
       These options are used for debugging foo2hbpl2.

       -S plane
              Output  just  a  single  color  plane  from a color print and print it on the black
              plane.  The default is to output all color planes.

              1   Cyan
              2   Magenta
              3   Yellow
              4   Black

       -D level
              Set Debug level [0].


       Create a black and white ZJS stream:

              gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
                  -sPAPERSIZE=letter -r1200x600 -sDEVICE=pbmraw
                  -sOutputFile=- - <
              | foo2hbpl2 -r1200x600 -g10200x6600 -p1 >

       Create a color ZJS stream:

              gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
                  -sPAPERSIZE=letter -g10200x6600 -r1200x600 -sDEVICE=bitcmyk
                  -sOutputFile=- - <
              | foo2hbpl2 -r1200x600 -g10200x6600 -p1 >testpage.zc




       foo2hbpl2-wrapper(1), hbpldecode(1)


       Rick Richardson <>
       Peter Korf <>