Provided by: gimp_2.10.6-3_amd64 bug

NAME

       gimp - an image manipulation and paint program.

SYNOPSIS

       gimp [-h] [--help] [--help-all] [--help-gtk] [-v] [--version] [--license] [--verbose] [-n]
       [--new-instance] [-a] [--as-new] [-i] [--no-interface] [-d] [--no-data] [-f]  [--no-fonts]
       [-s]  [--no-splash]   [--no-shm]  [--no-cpu-accel]  [--display display] [--session <name>]
       [-g] [--gimprc <gimprc>] [--system-gimprc <gimprc>]  [--dump-gimprc]  [--console-messages]
       [--debug-handlers]      [--stack-trace-mode     <mode>]     [--pdb-compat-mode     <mode>]
       [--batch-interpreter <procedure>] [-b] [--batch <command>] [filename] ...

DESCRIPTION

       GIMP is the GNU Image Manipulation Program. It is used to edit and manipulate  images.  It
       can load and save a variety of image formats and can be used to convert between formats.

       GIMP  can also be used as a paint program. It features a set of drawing and painting tools
       such as airbrush, clone, pencil, and paint  brush.  Painting  and  drawing  tools  can  be
       applied  to  an image with a variety of paint modes.  It also offers an extensive array of
       selection  tools  like  rectangle,  ellipse,  fuzzy  select,  bezier  select,  intelligent
       scissors, and select by color.

       GIMP offers a variety of plug-ins that perform a variety of image manipulations.  Examples
       include bumpmap, edge detect, gaussian blur,  and  many  others.  In  addition,  GIMP  has
       several  scripting  extensions  which  allow  for  advanced non-interactive processing and
       creation of images.

       GIMP ships with a second binary called gimp-console. This binary is a console-only version
       and behaves as if gimp was called with the --no-interface command-line option.

       On  platforms with the D-Bus message bus system, GIMP will by default check if an instance
       is already running in this user session. If it detects that, it will  pass  all  filenames
       given on the command-line to the already running GIMP instance and quit.

OPTIONS

       GIMP accepts the following options:

       -h, --help
               Show GIMP command-line options.

       --help-all
               Show all command-line options.

       --help-gtk
               Show GTK+ command-line options.

       --help-gegl
               Show GEGL command-line options.

       -v, --version
               Output  version  information  and  exit.  When combined with the --verbose option,
               version information about libraries used by GIMP is shown as well.

       --license
               Output license information and exit.

       --verbose
               Be verbose and create information on standard output.

       -n, --new-instance
               Do not attempt to reuse an already running GIMP instance. Always start a new one.

       -a, --as-new
               Open filenames passed on the command-line as new images, don't set the filename on
               them.

       -i, --no-interface
               Run without a user interface.

       -d, --no-data
               Do  not  load  patterns,  gradients,  palettes,  or  brushes. Often useful in non-
               interactive situations where startup time is to be minimized.

       -f, --no-fonts
               Do not load any fonts. No text functionality will be available if this  option  is
               used.

       --display display
               Use the designated X display.

       -s, --no-splash
               Do not show the splash screen.

       --no-shm
               Do  not  use shared memory between GIMP and its plug-ins.  Instead of using shared
               memory, GIMP will send the data via pipe. This will result in  slower  performance
               than using shared memory.

       --no-cpu-accel
               Do not use CPU accelerations such as MMX or SSE even if GIMP detects that your CPU
               provides this functionality.

       --session <name>
               Use a different sessionrc for  this  GIMP  session.  The  given  session  name  is
               appended to the default sessionrc filename.

       -g, --gimprc <gimprc>
               Use  an alternative gimprc instead of the default one. Useful in cases where plug-
               in paths or machine specs may be different.

       --system-gimprc <gimprc>
               Use an alternate system gimprc file.

       --dump-gimprc
               Output a gimprc file with default settings.

       --debug-handlers
               Enable debugging signal handlers.

       -c, --console-messages
               Do not popup dialog boxes on errors or warnings. Print the messages on the console
               instead.

       --stack-trace-mode {never|query|always}
               If a stack-trace should be generated in case of fatal signals.

       --pdb-compat-mode {off|on|warn}
               If the PDB should provide aliases for deprecated functions.

       --batch-interpreter <procedure>
               Specifies  the  procedure  to  use  to process batch events. The default is to let
               Script-Fu evaluate the commands.

       -b, --batch <command>
               Execute <command> non-interactively. This option may appear multiple  times.   The
               <command> is passed to the batch interpreter. When <command> is - the commands are
               read from standard input.

ENVIRONMENT

       GIMP respects a number of environment variables.

       DISPLAY to get the default host and display number.

       GIMP2_DIRECTORY
               to   get   the   name   of    the    personal    GIMP    directory.    If    unset
               $XDG_CONFIG_HOME/GIMP/2.10  is  used.   If this is an absolute path, it is used as
               is.   If  it  is  a  relative  path,  it  is  taken  to  be  a   subdirectory   of
               $XDG_CONFIG_HOME.

       GIMP2_DATADIR
               to  get  the  base location for data files such as brushes and patterns.  If unset
               ${datarootdir}/gimp/2.0 is used.

       GIMP2_LOCALEDIR
               to get the base location for translations. If unset ${datarootdir}/locale is used.

       GIMP2_PLUGINDIR
               to get the base location for plug-ins and modules. If unset  /usr/lib/gimp/2.0  is
               used.

       GIMP2_SYSCONFDIR
               to get the location of configuration files. If unset /etc/gimp/2.0 is used.

               On  Linux  GIMP can be compiled with support for binary relocatibility.  This will
               cause data, plug-ins and configuration  files  to  be  searched  relative  to  the
               location  of  the  gimp  executable  file  unless  overridden  by  the environment
               variables mentioned above.

FILES

       GIMP's data files are stored in ${datarootdir}/gimp/2.0, where ${datarootdir}  is  set  on
       install, but is typically /usr/share. GIMP's system-wide configuration files are stored in
       /etc/gimp/2.0, where ${prefix} is typically /usr.

       Most   GIMP    configuration    is    read    in    from    the    user's    init    file,
       $XDG_CONFIG_HOME/GIMP/2.10/gimprc.  The system wide equivalent is in /etc/gimp/2.0/gimprc.
       The system wide file is parsed first and the user gimprc can override the system settings.
       /etc/gimp/2.0/gimprc_user  is  the  default  gimprc  placed in users' home directories the
       first time GIMP is run.

       $XDG_CONFIG_HOME/GIMP/2.10/devicerc - holds settings for input devices together  with  the
       tool, colors, brush, pattern and gradient associated to that device.

       $XDG_CONFIG_HOME/GIMP/2.10/gtkrc  -  users  set  of  GIMP-specific  GTK+  config settings.
       Options such as widget color and fonts sizes can be set here.

       /etc/gimp/2.0/gtkrc - system wide default set of GIMP-specific GTK+ config settings.

       $XDG_CONFIG_HOME/GIMP/2.10/menurc - user's set of keybindings.

       $XDG_CONFIG_HOME/GIMP/2.10/parasiterc - Stores all persistent GIMP  parasites.  This  file
       will be rewritten every time you quit GIMP.

       $XDG_CONFIG_HOME/GIMP/2.10/sessionrc  -  This  file  takes  session-specific info (that is
       info, you want to keep between two GIMP  sessions).  You  are  not  supposed  to  edit  it
       manually,  but  of  course you can do. This file will be entirely rewritten every time you
       quit GIMP. If this file isn't found, defaults are used.

       $XDG_CONFIG_HOME/GIMP/2.10/templaterc - Image templates are kept in this file. New  images
       can  conveniently  created  from  these  templates. If this file isn't found, defaults are
       used.

       /etc/gimp/2.0/unitrc - default user unit database. It contains the  unit  definitions  for
       centimeters,  meters,  feet, yards, typographic points and typographic picas and is placed
       in users home directories the first time GIMP is ran. If this file isn't  found,  defaults
       are used.

       $XDG_CONFIG_HOME/GIMP/2.10/unitrc  -  This  file contains your user unit database. You can
       modify this list with the unit editor. You are not supposed to edit it  manually,  but  of
       course you can do.  This file will be entirely rewritten every time you quit GIMP.

       $XDG_CONFIG_HOME/GIMP/2.10/plug-ins - location of user installed plug-ins.

       $XDG_CONFIG_HOME/GIMP/2.10/pluginrc  - plug-in initialization values are stored here. This
       file is parsed on startup and regenerated if need be.

       $XDG_CONFIG_HOME/GIMP/2.10/modules - location of user installed modules.

       $XDG_CONFIG_HOME/GIMP/2.10/tmp - default location that GIMP uses as temporary space.

       ${datarootdir}/gimp/2.0/brushes - system wide brush files.

       $XDG_CONFIG_HOME/GIMP/2.10/brushes - user created and installed brush files.  These  files
       are in the .gbr, .gih or .vbr file formats.

       $XDG_CONFIG_HOME/GIMP/2.10/curves  -  Curve  profiles and presets as saved from the Curves
       tool.

       $XDG_CONFIG_HOME/GIMP/2.10/gimpressionist - Presets and user created  brushes  and  papers
       are stored here.

       $XDG_CONFIG_HOME/GIMP/2.10/levels  -  Level  profiles and presets as saved from the Levels
       tool.

       ${datarootdir}/gimp/2.0/palettes - the system wide palette files.

       $XDG_CONFIG_HOME/GIMP/2.10/palettes - user created and modified palette files. This  files
       are in the .gpl format.

       ${datarootdir}/gimp/2.0/patterns - basic set of patterns for use in GIMP.

       $XDG_CONFIG_HOME/GIMP/2.10/patterns  - user created and installed gimp pattern files. This
       files are in the .pat format.

       ${datarootdir}/gimp/2.0/gradients - standard system wide set of gradient files.

       $XDG_CONFIG_HOME/GIMP/2.10/gradients - user created and installed gradient files.

       ${datarootdir}/gimp/2.0/scripts - system wide directory of scripts used in  Script-Fu  and
       other scripting extensions.

       $XDG_CONFIG_HOME/GIMP/2.10/scripts - user created and installed scripts.

       ${datarootdir}/gimp/2.0/gflares - system wide directory used by the gflare plug-in.

       $XDG_CONFIG_HOME/GIMP/2.10/gflares - user created and installed gflare files.

       ${datarootdir}/gimp/2.0/gfig - system wide directory used by the gfig plug-in.

       $XDG_CONFIG_HOME/GIMP/2.10/gfig - user created and installed gfig files.

       ${datarootdir}/gimp/2.0/images/gimp-splash.png  -  the  default  image  used  for the GIMP
       splash screen.

       ${datarootdir}/gimp/2.0/images/gimp-logo.png - image used in the GIMP about dialog.

       ${datarootdir}/gimp/2.0/tips/gimp-tips.xml - tips as displayed in the  "Tip  of  the  Day"
       dialog box.

SPLASH IMAGES

       GIMP  comes with a default image for the splash screen but it allows system administrators
       and users to customize the splash screen by providing other images. The image to  be  used
       with the splash screen is chosen as follows:

       1.     GIMP    tries    to    load   a   random   splash   screen   from   the   directory
              $XDG_CONFIG_HOME/GIMP/2.10/splashes.

       2.     It then falls back to using $XDG_CONFIG_HOME/GIMP/2.10/gimp-splash.png.

       3.     If the user didn't install any custom splash images, a random image is picked  from
              ${datarootdir}/gimp/2.0/splashes.

       4.     As   a   last   resort,   GIMP   uses   the   default   splash   image  located  at
              ${datarootdir}/gimp/2.0/images/gimp-splash.png.

SUGGESTIONS AND BUG REPORTS

       Any bugs found should be reported to the online bug-tracking system available on  the  web
       at  https://gitlab.gnome.org/GNOME/gimp/issues. Before reporting bugs, please check to see
       if the bug has already been reported.

       When reporting GIMP bugs, it is important to include a reliable way to reproduce the  bug,
       version number of GIMP (and probably GTK+), OS name and version, and any relevant hardware
       specs. If a bug is causing a crash, it is very useful if a stack trace  can  be  provided.
       And of course, patches to rectify the bug are even better.

OTHER INFO

       The  canonical  place  to  find  GIMP info is at https://www.gimp.org/.  Here you can find
       links to just about many other GIMP sites, tutorials, data sets,  mailing  list  archives,
       and more.

       There  is  also a GIMP User Manual available at https://docs.gimp.org/ that goes into much
       more detail about the interactive use of GIMP.

       The  latest  versions  of   GIMP   and   the   GTK+   libs   are   always   available   at
       https://download.gimp.org/.

AUTHORS

       Spencer Kimball, Peter Mattis and the GIMP Development Team.

       With  patches,  fixes, plug-ins, extensions, scripts, translations, documentation and more
       from lots and lots of people all over the world.

SEE ALSO

       gimprc(5), gimptool(1),