Provided by: perl-doc_5.26.2-7_all bug

NAME

       perldeprecation - list Perl deprecations

DESCRIPTION

       The purpose of this document is to document what has been deprecated in Perl, and by which
       version the deprecated feature will disappear, or, for already removed features, when it
       was removed.

       This document will try to discuss what alternatives for the deprecated features are
       available.

       The deprecated features will be grouped by the version of Perl in which they will be
       removed.

   Perl 5.32
       Constants from lexical variables potentially modified elsewhere

       You wrote something like

           my $var;
           $sub = sub () { $var };

       but $var is referenced elsewhere and could be modified after the "sub" expression is
       evaluated.  Either it is explicitly modified elsewhere ("$var = 3") or it is passed to a
       subroutine or to an operator like "printf" or "map", which may or may not modify the
       variable.

       Traditionally, Perl has captured the value of the variable at that point and turned the
       subroutine into a constant eligible for inlining.  In those cases where the variable can
       be modified elsewhere, this breaks the behavior of closures, in which the subroutine
       captures the variable itself, rather than its value, so future changes to the variable are
       reflected in the subroutine's return value.

       If you intended for the subroutine to be eligible for inlining, then make sure the
       variable is not referenced elsewhere, possibly by copying it:

           my $var2 = $var;
           $sub = sub () { $var2 };

       If you do want this subroutine to be a closure that reflects future changes to the
       variable that it closes over, add an explicit "return":

           my $var;
           $sub = sub () { return $var };

       This usage has been deprecated, and will no longer be allowed in Perl 5.32.

   Perl 5.30
       $* is no longer supported

       Before Perl 5.10, setting $* to a true value globally enabled multi-line matching within a
       string. This relique from the past lost its special meaning in 5.10. Use of this variable
       will be a fatal error in Perl 5.30, freeing the variable up for a future special meaning.

       To enable multiline matching one should use the "/m" regexp modifier (possibly in
       combination with "/s"). This can be set on a per match bases, or can be enabled per
       lexical scope (including a whole file) with "use re '/m'".

       $# is no longer supported

       This variable used to have a special meaning -- it could be used to control how numbers
       were formatted when printed. This seldom used functionality was removed in Perl 5.10. In
       order to free up the variable for a future special meaning, its use will be a fatal error
       in Perl 5.30.

       To specify how numbers are formatted when printed, one is adviced to use "printf" or
       "sprintf" instead.

       "File::Glob::glob()" will disappear

       "File::Glob" has a function called "glob", which just calls "bsd_glob". However, its
       prototype is different from the prototype of "CORE::glob", and hence, "File::Glob::glob"
       should not be used.

       "File::Glob::glob()" was deprecated in Perl 5.8. A deprecation message was issued from
       Perl 5.26 onwards, and the function will disappear in Perl 5.30.

       Code using "File::Glob::glob()" should call "File::Glob::bsd_glob()" instead.

       Unescaped left braces in regular expressions

       The simple rule to remember, if you want to match a literal "{" character (U+007B "LEFT
       CURLY BRACKET") in a regular expression pattern, is to escape each literal instance of it
       in some way.  Generally easiest is to precede it with a backslash, like "\{" or enclose it
       in square brackets ("[{]").  If the pattern delimiters are also braces, any matching right
       brace ("}") should also be escaped to avoid confusing the parser, for example,

        qr{abc\{def\}ghi}

       Forcing literal "{" characters to be escaped will enable the Perl language to be extended
       in various ways in future releases.  To avoid needlessly breaking existing code, the
       restriction is is not enforced in contexts where there are unlikely to ever be extensions
       that could conflict with the use there of "{" as a literal.

       Literal uses of "{" were deprecated in Perl 5.20, and some uses of it started to give
       deprecation warnings since. These cases were made fatal in Perl 5.26. Due to an oversight,
       not all cases of a use of a literal "{" got a deprecation warning. These cases started
       warning in Perl 5.26, and they will be fatal by Perl 5.30.

       Unqualified "dump()"

       Use of "dump()" instead of "CORE::dump()" was deprecated in Perl 5.8, and an unqualified
       "dump()" will no longer be available in Perl 5.30.

       See "dump" in perlfunc.

       Using my() in false conditional.

       There has been a long-standing bug in Perl that causes a lexical variable not to be
       cleared at scope exit when its declaration includes a false conditional.  Some people have
       exploited this bug to achieve a kind of static variable.  Since we intend to fix this bug,
       we don't want people relying on this behavior.

       Instead, it's recommended one uses "state" variables to achieve the same effect:

           use 5.10.0;
           sub count {state $counter; return ++ $counter}
           say count ();    # Prints 1
           say count ();    # Prints 2

       "state" variables were introduced in Perl 5.10.

       Alternatively, you can achieve a similar static effect by declaring the variable in a
       separate block outside the function, eg

           sub f { my $x if 0; return $x++ }

       becomes

           { my $x; sub f { return $x++ } }

       The use of "my()" in a false conditional has been deprecated in Perl 5.10, and it will
       become a fatal error in Perl 5.30.

       Reading/writing bytes from/to :utf8 handles.

       The sysread(), recv(), syswrite() and send() operators are deprecated on handles that have
       the ":utf8" layer, either explicitly, or implicitly, eg., with the ":encoding(UTF-16LE)"
       layer.

       Both sysread() and recv() currently use only the ":utf8" flag for the stream, ignoring the
       actual layers.  Since sysread() and recv() do no UTF-8 validation they can end up creating
       invalidly encoded scalars.

       Similarly, syswrite() and send() use only the ":utf8" flag, otherwise ignoring any layers.
       If the flag is set, both write the value UTF-8 encoded, even if the layer is some
       different encoding, such as the example above.

       Ideally, all of these operators would completely ignore the ":utf8" state, working only
       with bytes, but this would result in silently breaking existing code.  To avoid this a
       future version of perl will throw an exception when any of sysread(), recv(), syswrite()
       or send() are called on handle with the ":utf8" layer.

       In Perl 5.30, it will no longer be possible to use sysread(), recv(), syswrite() or send()
       to read or send bytes from/to :utf8 handles.

       Use of unassigned code point or non-standalone grapheme for a delimiter.

       A grapheme is what appears to a native-speaker of a language to be a character.  In
       Unicode (and hence Perl) a grapheme may actually be several adjacent characters that
       together form a complete grapheme.  For example, there can be a base character, like "R"
       and an accent, like a circumflex "^", that appear when displayed to be a single character
       with the circumflex hovering over the "R".  Perl currently allows things like that
       circumflex to be delimiters of strings, patterns, etc.  When displayed, the circumflex
       would look like it belongs to the character just to the left of it.  In order to move the
       language to be able to accept graphemes as delimiters, we have to deprecate the use of
       delimiters which aren't graphemes by themselves.  Also, a delimiter must already be
       assigned (or known to be never going to be assigned) to try to future-proof code, for
       otherwise code that works today would fail to compile if the currently unassigned
       delimiter ends up being something that isn't a stand-alone grapheme.  Because Unicode is
       never going to assign non-character code points, nor code points that are above the legal
       Unicode maximum, those can be delimiters, and their use won't raise this warning.

       In Perl 5.30, delimiters which are unassigned code points, or which are non-standalone
       graphemes will be fatal.

       In XS code, use of various macros dealing with UTF-8.

       These macros will require an extra parameter in Perl 5.30: "isALPHANUMERIC_utf8",
       "isASCII_utf8", "isBLANK_utf8", "isCNTRL_utf8", "isDIGIT_utf8", "isIDFIRST_utf8",
       "isPSXSPC_utf8", "isSPACE_utf8", "isVERTWS_utf8", "isWORDCHAR_utf8", "isXDIGIT_utf8",
       "isALPHANUMERIC_LC_utf8", "isALPHA_LC_utf8", "isASCII_LC_utf8", "isBLANK_LC_utf8",
       "isCNTRL_LC_utf8", "isDIGIT_LC_utf8", "isGRAPH_LC_utf8", "isIDCONT_LC_utf8",
       "isIDFIRST_LC_utf8", "isLOWER_LC_utf8", "isPRINT_LC_utf8", "isPSXSPC_LC_utf8",
       "isPUNCT_LC_utf8", "isSPACE_LC_utf8", "isUPPER_LC_utf8", "isWORDCHAR_LC_utf8",
       "isXDIGIT_LC_utf8", "toFOLD_utf8", "toLOWER_utf8", "toTITLE_utf8", and "toUPPER_utf8".

       There is now a macro that corresponds to each one of these, simply by appending "_safe" to
       the name.  It takes the extra parameter.  For example, "isDIGIT_utf8_safe" corresponds to
       "isDIGIT_utf8", but takes the extra parameter, and its use doesn't generate a deprecation
       warning.  All are documented in "Character case changing" in perlapi and "Character
       classification" in perlapi.

       You can change to use these versions at any time, or, if you can live with the deprecation
       messages, wait until 5.30 and add the parameter to the existing calls, without changing
       the names.

   Perl 5.28
       Attribute "%s" is deprecated, and will disappear in 5.28

       The attributes ":locked" (on code references) and ":unique" (on array, hash and scalar
       references) have had no effect since Perl 5.005 and Perl 5.8.8 respectively. Their use has
       been deprecated since.

       These attributes will no longer be recognized in Perl 5.28, and will then result in a
       syntax error. Since the attributes do not do anything, removing them from your code fixes
       the deprecation warning; and removing them will not influence the behaviour of your code.

       Bare here-document terminators

       Perl has allowed you to use a bare here-document terminator to have the here-document end
       at the first empty line. This practise was deprecated in Perl 5.000, and this will be a
       fatal error in Perl 5.28.

       You are encouraged to use the explictly quoted form if you wish to use an empty line as
       the terminator of the here-document:

         print <<"";
           Print this line.

         # Previous blank line ends the here-document.

       Setting $/ to a reference to a non-positive integer

       You assigned a reference to a scalar to $/ where the referenced item is not a positive
       integer.  In older perls this appeared to work the same as setting it to "undef" but was
       in fact internally different, less efficient and with very bad luck could have resulted in
       your file being split by a stringified form of the reference.

       In Perl 5.20.0 this was changed so that it would be exactly the same as setting $/ to
       undef, with the exception that this warning would be thrown.

       In Perl 5.28, this will throw a fatal error.

       You are recommended to change your code to set $/ to "undef" explicitly if you wish to
       slurp the file.

       Limit on the value of Unicode code points.

       Unicode only allows code points up to 0x10FFFF, but Perl allows much larger ones. However,
       using code points exceeding the maximum value of an integer ("IV_MAX") may break the perl
       interpreter in some constructs, including causing it to hang in a few cases.  The known
       problem areas are in "tr///", regular expression pattern matching using quantifiers, as
       quote delimiters in "qX...X" (where X is the "chr()" of a large code point), and as the
       upper limits in loops.

       The use of out of range code points was deprecated in Perl 5.24, and it will be a fatal
       error in Perl 5.28.

       If your code is to run on various platforms, keep in mind that the upper limit depends on
       the platform.  It is much larger on 64-bit word sizes than 32-bit ones.

       Use of comma-less variable list in formats.

       It's allowed to use a list of variables in a format, without separating them with commas.
       This usage has been deprecated for a long time, and it will be a fatal error in Perl 5.28.

       Use of "\N{}"

       Use of "\N{}" with nothing between the braces was deprecated in Perl 5.24, and will throw
       a fatal error in Perl 5.28.

       Since such a construct is equivalent to using an empty string, you are recommended to
       remove such "\N{}" constructs.

       Using the same symbol to open a filehandle and a dirhandle

       It used to be legal to use "open()" to associate both a filehandle and a dirhandle to the
       same symbol (glob or scalar).  This idiom is likely to be confusing, and it was deprecated
       in Perl 5.10.

       Using the same symbol to "open()" a filehandle and a dirhandle will be a fatal error in
       Perl 5.28.

       You should be using two different symbols instead.

       ${^ENCODING} is no longer supported.

       The special variable "${^ENCODING}" was used to implement the "encoding" pragma. Setting
       this variable to anything other than "undef" was deprecated in Perl 5.22. Full deprecation
       of the variable happened in Perl 5.25.3.

       Setting this variable will become a fatal error in Perl 5.28.

       "B::OP::terse"

       This method, which just calls "B::Concise::b_terse", has been deprecated, and will
       disappear in Perl 5.28. Please use "B::Concise" instead.

       Use of inherited AUTOLOAD for non-method %s() is deprecated

       As an (ahem) accidental feature, "AUTOLOAD" subroutines are looked up as methods (using
       the @ISA hierarchy) even when the subroutines to be autoloaded were called as plain
       functions (e.g. "Foo::bar()"), not as methods (e.g. "Foo->bar()" or "$obj->bar()").

       This bug will be rectified in future by using method lookup only for methods' "AUTOLOAD"s.

       The simple rule is:  Inheritance will not work when autoloading non-methods.  The simple
       fix for old code is:  In any module that used to depend on inheriting "AUTOLOAD" for non-
       methods from a base class named "BaseClass", execute "*AUTOLOAD = \&BaseClass::AUTOLOAD"
       during startup.

       In code that currently says "use AutoLoader; @ISA = qw(AutoLoader);" you should remove
       AutoLoader from @ISA and change "use AutoLoader;" to "use AutoLoader 'AUTOLOAD';".

       This feature was deprecated in Perl 5.004, and will be fatal in Perl 5.28.

       Use of code points over 0xFF in string bitwise operators

       The string bitwise operators, "&", "|", "^", and "~", treat their operands as strings of
       bytes. As such, values above 0xFF are nonsensical. Using such code points with these
       operators was deprecated in Perl 5.24, and will be fatal in Perl 5.28.

       In XS code, use of "to_utf8_case()"

       This function is being removed; instead convert to call the appropriate one of:
       "toFOLD_utf8_safe".  "toLOWER_utf8_safe", "toTITLE_utf8_safe", or "toUPPER_utf8_safe".

   Perl 5.26
       "--libpods" in "Pod::Html"

       Since Perl 5.18, the option "--libpods" has been deprecated, and using this option did not
       do anything other than producing a warning.

       The "--libpods" option is no longer recognized in Perl 5.26.

       The utilities "c2ph" and "pstruct"

       These old, perl3-era utilities have been deprecated in favour of "h2xs" for a long time.
       In Perl 5.26, they have been removed.

       Trapping "$SIG {__DIE__}" other than during program exit.

       The $SIG{__DIE__} hook is called even inside an "eval()". It was never intended to happen
       this way, but an implementation glitch made this possible. This used to be deprecated, as
       it allowed strange action at a distance like rewriting a pending exception in $@. Plans to
       rectify this have been scrapped, as users found that rewriting a pending exception is
       actually a useful feature, and not a bug.

       Perl never issued a deprecation warning for this; the deprecation was by documentation
       policy only. But this deprecation has been lifted in Perl 5.26.

       Malformed UTF-8 string in "%s"

       This message indicates a bug either in the Perl core or in XS code. Such code was trying
       to find out if a character, allegedly stored internally encoded as UTF-8, was of a given
       type, such as being punctuation or a digit.  But the character was not encoded in legal
       UTF-8.  The %s is replaced by a string that can be used by knowledgeable people to
       determine what the type being checked against was.

       Passing malformed strings was deprecated in Perl 5.18, and became fatal in Perl 5.26.

   Perl 5.24
       Use of *glob{FILEHANDLE}

       The use of *glob{FILEHANDLE} was deprecated in Perl 5.8.  The intention was to use
       *glob{IO} instead, for which *glob{FILEHANDLE} is an alias.

       However, this feature was undeprecated in Perl 5.24.

       Calling POSIX::%s() is deprecated

       The following functions in the "POSIX" module are no longer available: "isalnum",
       "isalpha", "iscntrl", "isdigit", "isgraph", "islower", "isprint", "ispunct", "isspace",
       "isupper", and "isxdigit".  The functions are buggy and don't work on UTF-8 encoded
       strings.  See their entries in POSIX for more information.

       The functions were deprecated in Perl 5.20, and removed in Perl 5.24.

   Perl 5.16
       Use of %s on a handle without * is deprecated

       It used to be possible to use "tie", "tied" or "untie" on a scalar while the scalar holds
       a typeglob. This caused its filehandle to be tied. It left no way to tie the scalar itself
       when it held a typeglob, and no way to untie a scalar that had had a typeglob assigned to
       it.

       This was deprecated in Perl 5.14, and the bug was fixed in Perl 5.16.

       So now "tie $scalar" will always tie the scalar, not the handle it holds.  To tie the
       handle, use "tie *$scalar" (with an explicit asterisk).  The same applies to "tied
       *$scalar" and "untie *$scalar".

SEE ALSO

       warnings, diagnostics.