Provided by: openssl_1.1.1-1ubuntu2_amd64 bug

NAME

       openssl-pkcs12, pkcs12 - PKCS#12 file utility

SYNOPSIS

       openssl pkcs12 [-help] [-export] [-chain] [-inkey file_or_id] [-certfile filename] [-name
       name] [-caname name] [-in filename] [-out filename] [-noout] [-nomacver] [-nocerts]
       [-clcerts] [-cacerts] [-nokeys] [-info] [-des | -des3 | -idea | -aes128 | -aes192 |
       -aes256 | -aria128 | -aria192 | -aria256 | -camellia128 | -camellia192 | -camellia256 |
       -nodes] [-noiter] [-maciter | -nomaciter | -nomac] [-twopass] [-descert] [-certpbe cipher]
       [-keypbe cipher] [-macalg digest] [-keyex] [-keysig] [-password arg] [-passin arg]
       [-passout arg] [-rand file...]  [-writerand file] [-CAfile file] [-CApath dir]
       [-no-CAfile] [-no-CApath] [-CSP name]

DESCRIPTION

       The pkcs12 command allows PKCS#12 files (sometimes referred to as PFX files) to be created
       and parsed. PKCS#12 files are used by several programs including Netscape, MSIE and MS
       Outlook.

OPTIONS

       There are a lot of options the meaning of some depends of whether a PKCS#12 file is being
       created or parsed. By default a PKCS#12 file is parsed. A PKCS#12 file can be created by
       using the -export option (see below).

PARSING OPTIONS

       -help
           Print out a usage message.

       -in filename
           This specifies filename of the PKCS#12 file to be parsed. Standard input is used by
           default.

       -out filename
           The filename to write certificates and private keys to, standard output by default.
           They are all written in PEM format.

       -passin arg
           The PKCS#12 file (i.e. input file) password source. For more information about the
           format of arg see the PASS PHRASE ARGUMENTS section in openssl(1).

       -passout arg
           Pass phrase source to encrypt any outputted private keys with. For more information
           about the format of arg see the PASS PHRASE ARGUMENTS section in openssl(1).

       -password arg
           With -export, -password is equivalent to -passout.  Otherwise, -password is equivalent
           to -passin.

       -noout
           This option inhibits output of the keys and certificates to the output file version of
           the PKCS#12 file.

       -clcerts
           Only output client certificates (not CA certificates).

       -cacerts
           Only output CA certificates (not client certificates).

       -nocerts
           No certificates at all will be output.

       -nokeys
           No private keys will be output.

       -info
           Output additional information about the PKCS#12 file structure, algorithms used and
           iteration counts.

       -des
           Use DES to encrypt private keys before outputting.

       -des3
           Use triple DES to encrypt private keys before outputting, this is the default.

       -idea
           Use IDEA to encrypt private keys before outputting.

       -aes128, -aes192, -aes256
           Use AES to encrypt private keys before outputting.

       -aria128, -aria192, -aria256
           Use ARIA to encrypt private keys before outputting.

       -camellia128, -camellia192, -camellia256
           Use Camellia to encrypt private keys before outputting.

       -nodes
           Don't encrypt the private keys at all.

       -nomacver
           Don't attempt to verify the integrity MAC before reading the file.

       -twopass
           Prompt for separate integrity and encryption passwords: most software always assumes
           these are the same so this option will render such PKCS#12 files unreadable.

FILE CREATION OPTIONS

       -export
           This option specifies that a PKCS#12 file will be created rather than parsed.

       -out filename
           This specifies filename to write the PKCS#12 file to. Standard output is used by
           default.

       -in filename
           The filename to read certificates and private keys from, standard input by default.
           They must all be in PEM format. The order doesn't matter but one private key and its
           corresponding certificate should be present. If additional certificates are present
           they will also be included in the PKCS#12 file.

       -inkey file_or_id
           File to read private key from. If not present then a private key must be present in
           the input file.  If no engine is used, the argument is taken as a file; if an engine
           is specified, the argument is given to the engine as a key identifier.

       -name friendlyname
           This specifies the "friendly name" for the certificate and private key. This name is
           typically displayed in list boxes by software importing the file.

       -certfile filename
           A filename to read additional certificates from.

       -caname friendlyname
           This specifies the "friendly name" for other certificates. This option may be used
           multiple times to specify names for all certificates in the order they appear.
           Netscape ignores friendly names on other certificates whereas MSIE displays them.

       -pass arg, -passout arg
           The PKCS#12 file (i.e. output file) password source. For more information about the
           format of arg see the PASS PHRASE ARGUMENTS section in openssl(1).

       -passin password
           Pass phrase source to decrypt any input private keys with. For more information about
           the format of arg see the PASS PHRASE ARGUMENTS section in openssl(1).

       -chain
           If this option is present then an attempt is made to include the entire certificate
           chain of the user certificate. The standard CA store is used for this search. If the
           search fails it is considered a fatal error.

       -descert
           Encrypt the certificate using triple DES, this may render the PKCS#12 file unreadable
           by some "export grade" software. By default the private key is encrypted using triple
           DES and the certificate using 40 bit RC2.

       -keypbe alg, -certpbe alg
           These options allow the algorithm used to encrypt the private key and certificates to
           be selected. Any PKCS#5 v1.5 or PKCS#12 PBE algorithm name can be used (see NOTES
           section for more information). If a cipher name (as output by the list-cipher-
           algorithms command is specified then it is used with PKCS#5 v2.0. For interoperability
           reasons it is advisable to only use PKCS#12 algorithms.

       -keyex|-keysig
           Specifies that the private key is to be used for key exchange or just signing.  This
           option is only interpreted by MSIE and similar MS software. Normally "export grade"
           software will only allow 512 bit RSA keys to be used for encryption purposes but
           arbitrary length keys for signing. The -keysig option marks the key for signing only.
           Signing only keys can be used for S/MIME signing, authenticode (ActiveX control
           signing)  and SSL client authentication, however due to a bug only MSIE 5.0 and later
           support the use of signing only keys for SSL client authentication.

       -macalg digest
           Specify the MAC digest algorithm. If not included them SHA1 will be used.

       -nomaciter, -noiter
           These options affect the iteration counts on the MAC and key algorithms.  Unless you
           wish to produce files compatible with MSIE 4.0 you should leave these options alone.

           To discourage attacks by using large dictionaries of common passwords the algorithm
           that derives keys from passwords can have an iteration count applied to it: this
           causes a certain part of the algorithm to be repeated and slows it down. The MAC is
           used to check the file integrity but since it will normally have the same password as
           the keys and certificates it could also be attacked.  By default both MAC and
           encryption iteration counts are set to 2048, using these options the MAC and
           encryption iteration counts can be set to 1, since this reduces the file security you
           should not use these options unless you really have to. Most software supports both
           MAC and key iteration counts.  MSIE 4.0 doesn't support MAC iteration counts so it
           needs the -nomaciter option.

       -maciter
           This option is included for compatibility with previous versions, it used to be needed
           to use MAC iterations counts but they are now used by default.

       -nomac
           Don't attempt to provide the MAC integrity.

       -rand file...
           A file or files containing random data used to seed the random number generator.
           Multiple files can be specified separated by an OS-dependent character.  The separator
           is ; for MS-Windows, , for OpenVMS, and : for all others.

       [-writerand file]
           Writes random data to the specified file upon exit.  This can be used with a
           subsequent -rand flag.

       -CAfile file
           CA storage as a file.

       -CApath dir
           CA storage as a directory. This directory must be a standard certificate directory:
           that is a hash of each subject name (using x509 -hash) should be linked to each
           certificate.

       -no-CAfile
           Do not load the trusted CA certificates from the default file location.

       -no-CApath
           Do not load the trusted CA certificates from the default directory location.

       -CSP name
           Write name as a Microsoft CSP name.

NOTES

       Although there are a large number of options most of them are very rarely used. For
       PKCS#12 file parsing only -in and -out need to be used for PKCS#12 file creation -export
       and -name are also used.

       If none of the -clcerts, -cacerts or -nocerts options are present then all certificates
       will be output in the order they appear in the input PKCS#12 files. There is no guarantee
       that the first certificate present is the one corresponding to the private key. Certain
       software which requires a private key and certificate and assumes the first certificate in
       the file is the one corresponding to the private key: this may not always be the case.
       Using the -clcerts option will solve this problem by only outputting the certificate
       corresponding to the private key. If the CA certificates are required then they can be
       output to a separate file using the -nokeys -cacerts options to just output CA
       certificates.

       The -keypbe and -certpbe algorithms allow the precise encryption algorithms for private
       keys and certificates to be specified. Normally the defaults are fine but occasionally
       software can't handle triple DES encrypted private keys, then the option -keypbe
       PBE-SHA1-RC2-40 can be used to reduce the private key encryption to 40 bit RC2. A complete
       description of all algorithms is contained in the pkcs8 manual page.

       Prior 1.1 release passwords containing non-ASCII characters were encoded in non-compliant
       manner, which limited interoperability, in first hand with Windows. But switching to
       standard-compliant password encoding poses problem accessing old data protected with
       broken encoding. For this reason even legacy encodings is attempted when reading the data.
       If you use PKCS#12 files in production application you are advised to convert the data,
       because implemented heuristic approach is not MT-safe, its sole goal is to facilitate the
       data upgrade with this utility.

EXAMPLES

       Parse a PKCS#12 file and output it to a file:

        openssl pkcs12 -in file.p12 -out file.pem

       Output only client certificates to a file:

        openssl pkcs12 -in file.p12 -clcerts -out file.pem

       Don't encrypt the private key:

        openssl pkcs12 -in file.p12 -out file.pem -nodes

       Print some info about a PKCS#12 file:

        openssl pkcs12 -in file.p12 -info -noout

       Create a PKCS#12 file:

        openssl pkcs12 -export -in file.pem -out file.p12 -name "My Certificate"

       Include some extra certificates:

        openssl pkcs12 -export -in file.pem -out file.p12 -name "My Certificate" \
         -certfile othercerts.pem

SEE ALSO

       pkcs8(1)

COPYRIGHT

       Copyright 2000-2017 The OpenSSL Project Authors. All Rights Reserved.

       Licensed under the OpenSSL license (the "License").  You may not use this file except in
       compliance with the License.  You can obtain a copy in the file LICENSE in the source
       distribution or at <https://www.openssl.org/source/license.html>.