Provided by: pcmcia-cs_3.2.8-5.2ubuntu5_i386
axnet_cs - Asix AX88190 chipset PCMCIA Ethernet Driver
insmod axnet_cs.o [pc_debug=n] [irq_list=i,j,...]
Axnet_cs is a driver for PCMCIA ethernet cards based on the Asix
AX88190 chipset. These cards are mostly NE2000 compatible but have
several bugs that are sufficiently tricky to work around that a
separate driver was deemed necessary. When this driver is bound to a
card, it allocates the next available ethernet device (eth0..eth#).
This device name will be reported in the kernel log file, and passed on
The driver uses the N-Way autonegotiating transceiver to negotiate the
speed and duplex of the network link. If the link partner does not
support negotiation, only the link speed is detected. To monitor or
override the autonegotiation process, see mii-tool(8).
Selects the PCMCIA debugging level. This parameter is only
available if the module is compiled with debugging enabled. A
non-zero value enables debugging.
Specifies the set of interrupts that may be allocated by this
axnet_cs: this is not an AX88190 card!
Indicates that this card is probably a normal NE2000 compatible
card, which requires the pcnet_cs driver.
eth#: interrupt(s) dropped!
Indicates that the driver did not receive an interrupt
notification for some reason. The driver will poll the card
(with a significant performance penalty) if the problem
persists. The most likely cause is an interrupt conflict and/or
host bridge configuration problem.
David Hinds - firstname.lastname@example.org
cardmgr(8), pcmcia(5), mii-tool(8).