Provided by: postfix_2.2.10-1_i386 bug

NAME

       header_checks - Postfix built-in header/body inspection

SYNOPSIS

       header_checks = pcre:/etc/postfix/header_checks
       mime_header_checks = pcre:/etc/postfix/mime_header_checks
       nested_header_checks = pcre:/etc/postfix/nested_header_checks
       body_checks = pcre:/etc/postfix/body_checks

       postmap -fq "string" pcre:/etc/postfix/filename
       postmap -fq - pcre:/etc/postfix/filename <inputfile

DESCRIPTION

       Postfix  provides  a  simple built-in content inspection mechanism that
       examines incoming mail one message header or one message body line at a
       time.  Each  input  is  compared against a list of patterns, and when a
       match is found the corresponding action is executed.  This  feature  is
       implemented by the Postfix cleanup(8) server.

       For  examples, see the EXAMPLES section at the end of this manual page.

       Postfix header or body_checks are designed to stop a flood of mail from
       worms or viruses; they do not decode attachments, and they do not unzip
       archives. See the  documents  referenced  below  in  the  README  FILES
       section if you need more sophisticated content analysis.

       Postfix supports four built-in content inspection classes:

       header_checks
              These  are  applied  to  initial message headers (except for the
              headers that are processed with mime_header_checks).

       mime_header_checks (default: $header_checks)
              These are applied to MIME related message headers only.

              This feature is available in Postfix 2.0 and later.

       nested_header_checks (default: $header_checks)
              These are applied to message headers of attached email  messages
              (except    for    the    headers   that   are   processed   with
              mime_header_checks).

              This feature is available in Postfix 2.0 and later.

       body_checks
              These are applied to all  other  content,  including  multi-part
              message boundaries.

              With  Postfix versions before 2.0, all content after the initial
              message headers is treated as body content.

       Note: message headers are examined one logical header at a  time,  even
       when  a  message  header  spans  multiple  lines. Body lines are always
       examined one line at a time.

TABLE FORMAT

       This document assumes that header and body_checks rules  are  specified
       in  the  form  of Postfix regular expression lookup tables. Usually the
       best  performance  is  obtained  with  pcre  (Perl  Compatible  Regular
       Expression)  tables,  but the slower regexp (POSIX regular expressions)
       support is more widely available.  Use the  command  "postconf  -m"  to
       find out what lookup table types your Postfix system supports.

       The general format of Postfix regular expression tables is given below.
       For a discussion of specific pattern or flags syntax, see pcre_table(5)
       or regexp_table(5), respectively.

       /pattern/flags action
              When pattern matches the input string, execute the corresponding
              action. See below for a list of possible actions.

       !/pattern/flags action
              When pattern does  not  match  the  input  string,  execute  the
              corresponding action.

       if /pattern/flags

       endif  Match  the  input  string  against  the  patterns between if and
              endif, if and only if the input string also matches pattern. The
              if..endif can nest.

              Note: do not prepend whitespace to patterns inside if..endif.

       if !/pattern/flags

       endif  Match  the  input  string  against  the  patterns between if and
              endif, if and only if the input string does not  match  pattern.
              The if..endif can nest.

       blank lines and comments
              Empty  lines and whitespace-only lines are ignored, as are lines
              whose first non-whitespace character is a ‘#’.

       multi-line text
              A pattern/action line starts with non-whitespace  text.  A  line
              that starts with whitespace continues a logical line.

TABLE SEARCH ORDER

       For  each  line of message input, the patterns are applied in the order
       as specified in the table. When a pattern is  found  that  matches  the
       input  line,  the  corresponding  action  is executed and then the next
       input line is inspected.

TEXT SUBSTITUTION

       Substitution of substrings from the matched expression into the  action
       string  is  possible using the conventional Perl syntax ($1, $2, etc.).
       The macros in the result string may need to be written as ${n} or  $(n)
       if they aren’t followed by whitespace.

       Note: since negated patterns (those preceded by !) return a result when
       the expression does not match,  substitutions  are  not  available  for
       negated patterns.

ACTIONS

       Action  names  are  case  insensitive. They are shown in upper case for
       consistency with other Postfix documentation.

       DISCARD optional text...
              Claim successful delivery and silently discard the message.  Log
              the optional text if specified, otherwise log a generic message.

              Note:  this  action  disables  further  header  or   body_checks
              inspection of the current message and affects all recipients.

              This feature is available in Postfix 2.0 and later.

       DUNNO  Pretend  that  the  input  line  did  not match any pattern, and
              inspect the next input line. This action can be used to  shorten
              the table search.

              For backwards compatibility reasons, Postfix also accepts OK but
              it is (and always has been) treated as DUNNO.

              This feature is available in Postfix 2.1 and later.

       FILTER transport:destination
              Write a content filter request to the queue file and inspect the
              next input line.  After the complete message is received it will
              be sent through the specified  external  content  filter.   More
              information  about  external  content  filters is in the Postfix
              FILTER_README file.

              Note: this action overrides the main.cf content_filter  setting,
              and  affects  all  recipients  of  the message. In the case that
              multiple FILTER actions fire, only the last one is executed.

              This feature is available in Postfix 2.0 and later.

       HOLD optional text...
              Arrange for the message to be placed  on  the  hold  queue,  and
              inspect  the next input line.  The message remains on hold until
              someone either deletes it or releases it for delivery.  Log  the
              optional text if specified, otherwise log a generic message.

              Mail  that is placed on hold can be examined with the postcat(1)
              command, and can be destroyed or released with the  postsuper(1)
              command.

              Note:  use  "postsuper -r" to release mail that was kept on hold
              for  a  significant  fraction  of   $maximal_queue_lifetime   or
              $bounce_queue_lifetime, or longer.

              Note: this action affects all recipients of the message.

              This feature is available in Postfix 2.0 and later.

       IGNORE Delete  the  current  line  from  the input and inspect the next
              input line.

       PREPEND text...
              Prepend one line with the specified text and  inspect  the  next
              input line.

              Notes:

              ·      The   prepended  text  is  output  on  a  separate  line,
                     immediately before the input that triggered  the  PREPEND
                     action.

              ·      The  prepended  text  is not considered part of the input
                     stream: it  is  not  subject  to  header/body  checks  or
                     address  rewriting,  and  it does not affect the way that
                     Postfix adds missing message headers.

              ·      When prepending text before a message  header  line,  the
                     prepended  text  must  begin  with a valid message header
                     label.

              ·      This action cannot be used to prepend multi-line text.

              This feature is available in Postfix 2.1 and later.

       REDIRECT user@domain
              Write a message  redirection  request  to  the  queue  file  and
              inspect  the  next  input  line. After the message is queued, it
              will be sent to the specified address instead  of  the  intended
              recipient(s).

              Note:  this  action overrides the FILTER action, and affects all
              recipients of the message. If multiple  REDIRECT  actions  fire,
              only the last one is executed.

              This feature is available in Postfix 2.1 and later.

       REPLACE text...
              Replace the current line with the specified text and inspect the
              next input line.

              This  feature  is  available  in  Postfix  2.2  and  later.  The
              description below applies to Postfix 2.2.2 and later.

              Notes:

              ·      When  replacing  a  message  header line, the replacement
                     text must begin with a valid header label.

              ·      The replaced text  remains  part  of  the  input  stream.
                     Unlike  the  result  from  the PREPEND action, a replaced
                     message header may be subject to  address  rewriting  and
                     may  affect  the  way  that  Postfix adds missing message
                     headers.

       REJECT optional text...
              Reject the entire message. Reply with optional text... when  the
              optional text is specified, otherwise reply with a generic error
              message.

              Note:  this  action  disables  further  header  or   body_checks
              inspection of the current message and affects all recipients.

       WARN optional text...
              Log  a  warning  with  the  optional  text...  (or log a generic
              message) and inspect the next input line. This action is  useful
              for  debugging  and  for  testing a pattern before applying more
              drastic actions.

BUGS

       Many people overlook the main limitations  of  header  and  body_checks
       rules.   These  rules operate on one logical message header or one body
       line at a time, and a decision made for one line is not carried over to
       the  next line.  If text in the message body is encoded (RFC 2045) then
       the rules have to specified  for  the  encoded  form.   Likewise,  when
       message  headers  are  encoded  (RFC  2047)  then  the rules need to be
       specified for the encoded form.

       Message headers added by the cleanup(8) daemon itself are excluded from
       inspection.  Examples  of such message headers are From:, To:, Message-
       ID:, Date:.

       Message headers deleted by  the  cleanup(8)  daemon  will  be  examined
       before  they  are deleted. Examples are: Bcc:, Content-Length:, Return-
       Path:.

CONFIGURATION PARAMETERS

       body_checks
              Lookup tables with content filter rules for message body  lines.
              These  filters  see one physical line at a time, in chunks of at
              most $line_length_limit bytes.

       body_checks_size_limit
              The amount of content per message body segment (attachment) that
              is subjected to $body_checks filtering.

       header_checks

       mime_header_checks (default: $header_checks)

       nested_header_checks (default: $header_checks)
              Lookup  tables  with  content  filter  rules  for message header
              lines: respectively, these are applied to  the  initial  message
              headers  (not  including  MIME  headers),  to  the  MIME headers
              anywhere in the message, and to the initial headers of  attached
              messages.

              Note:  these  filters  see one logical message header at a time,
              even when a message header spans multiple lines. Message headers
              that   are   longer   than   $header_size_limit  characters  are
              truncated.

       disable_mime_input_processing
              While receiving mail, give no special treatment to MIME  related
              message  headers;  all text after the initial message headers is
              considered to be part of  the  message  body.  This  means  that
              header_checks is applied to all the initial message headers, and
              that body_checks is applied to the remainder of the message.

              Note: when used in  this  manner,  body_checks  will  process  a
              multi-line message header one line at a time.

EXAMPLES

       Header pattern to block attachments with bad file name extensions.

       /etc/postfix/main.cf:
           header_checks = regexp:/etc/postfix/header_checks

       /etc/postfix/header_checks:
           /^content-(type|disposition):.*name[[:space:]]*=.*\.(exe|vbs)/
               REJECT Bad attachment file name extension: $2

       Body pattern to stop a specific HTML browser vulnerability exploit.

       /etc/postfix/main.cf:
           body_checks = regexp:/etc/postfix/body_checks

       /etc/postfix/body_checks:
           /^<iframe src=(3D)?cid:.* height=(3D)?0 width=(3D)?0>$/
               REJECT IFRAME vulnerability exploit

SEE ALSO

       cleanup(8), canonicalize and enqueue Postfix message
       pcre_table(5), format of PCRE lookup tables
       regexp_table(5), format of POSIX regular expression tables
       postconf(1), Postfix configuration utility
       postmap(1), Postfix lookup table management
       postsuper(1), Postfix janitor
       postcat(1), show Postfix queue file contents
       RFC 2045, base64 and quoted-printable encoding rules
       RFC 2047, message header encoding for non-ASCII text

README FILES

       Use  "postconf readme_directory" or "postconf html_directory" to locate
       this information.
       DATABASE_README, Postfix lookup table overview
       CONTENT_INSPECTION_README, Postfix content inspection overview
       BUILTIN_FILTER_README, Postfix built-in content inspection
       BACKSCATTER_README, blocking returned forged mail

LICENSE

       The Secure Mailer license must be distributed with this software.

AUTHOR(S)

       Wietse Venema
       IBM T.J. Watson Research
       P.O. Box 704
       Yorktown Heights, NY 10598, USA

                                                              HEADER_CHECKS(5)