Provided by: bootcd_2.51_all bug

NAME

       bootcd2disk.conf - configuration file for bootcd2disk

DESCRIPTION

       The   file  bootcd2disk.conf  contains  configuration  option  for  the
       bootcd2disk(1) program of the same named  package.  The  file  must  be
       located in the configuration directory which is usually /etc/bootcd.

       Blank  lines  are ignored and lines with leading # are comments. Values
       have to be set with name=value

       You can use a wildcard named DISK<number> to specify partitions instead
       of  e.g. /dev/hda<number>. DISK was replaced by $DISK, which can be set
       by the same named parameter.

FORMAT

       ERRLOG=<path>
              Write all errors to this file. Required.

       DISK=<device|auto>
              Specify the disk you want to  use  for  the  installation,  e.g.
              /dev/hda  for  the  first  IDE  drive  in the system. If you use
              "auto", bootcd2disk automatically try to use the first  harddisk
              in the system. Required.

       SFDISK=<partitions in sfdisk syntax|auto>
              Configuration  options  for sfdisk, which creates the partitions
              for us. If you use "auto", we  create  default  partitions  "/",
              "/boot" and a swap partition. Required.

       VFAT=<partitions separated by spaces>
              Configure vfat partitions there, if you need some. Optional.

       EXT2FS=<partitions separated by spaces|auto>
              Specify  the  partitions  with ext2 or ext3 (see next parameter)
              here. This partitions would be created and formated. If you  use
              "auto",  the  "/"  and  the  "/boot" partition would be created.
              Required.

       EXT3FS=<yes|no>
              Enter "yes" If you want ext3 partitions. If you use "auto",  the
              systems use ext3 partition, if the kernel supports it. Required.

       SWAP=<partitions separated by spaces|auto>
              The partitions configured there are created as swap. If you  use
              "auto", one swap partition is been created. Required.

       MOUNT=<mount <partition> <mountpoint>; ... |auto>
              Insert  here  the  mount commandline to mount your partitions or
              use "auto". Required.

       UMOUNT=<umount <mountpoint>; ... |auto>
              Insert here the mount commandline to umount your  partitions  or
              use "auto". Required.

       FSTAB=<entries for the systems fstab |auto>
              Configure  here  all  partitions  you need to mount after target
              systems startup in the fstab syntax or use "auto". Required.

       LILO=<entries for the systems lilo.conf |auto>
              This variable includes the complete configuration file  for  the
              lilo   bootloader   on   the   target  system.  Use  "auto"  for
              automaticaly generated file. Only required, if  you  want  LILO.
              Make sure GRUB is not defined as empty.

       GRUB=<entries for the systems grub/menu.lst |auto>
              This  variable  includes the complete configuration file for the
              grub  bootloader  on  the  target   system.   Use   "auto"   for
              automaticaly generated file. Only required, if you want GRUB.

       ELILO=<entries for the systems elilo.conf |auto>
              Same  as LILO but for the elilo bootloader on ia64 systems.  Use
              "auto" for automaticaly generated file. Only  required,  if  you
              want ELILO.

       SSHOSTKEY=<yes|no>
              If you are using ssh it is helpfull to have a unique ssh hostkey
              for  each  system  installed  with  bootcd2disk.  This  will  be
              generated if this option is set to "yes". Required.

       function after_copy() {
              return }
              If  you  want some action after copying the system to the target
              disk, like remount or other thinks, you can write this action to
              the body of this function. Optional.

FILES

       /etc/bootcd/bootcd2disk.conf
              Configuration for bootcd2disk.

SEE ALSO

       bootcd2disk(1),    bootcd(1),    bootcdflopcp(1),    bootcdmkinitrd(1),
       bootcdwrite(1)

AUTHOR

       This    manual    page    was    written    by    Carsten    Dinkelmann
       <carsten.dinkelmann@foobar-cpa.de>,  for  the  Debian  GNU/Linux system
       (but may be used by others).

                         Wed Mai 15 12:15:00 MET 2005      BOOTCD2DISK.CONF(5)