Provided by: elinks-lite_0.10.6-1ubuntu3_i386 bug

NAME

       elinks.conf - ELinks configuration file

DESCRIPTION

       The elinks.conf file contains configuration information for ELinks.  It
       can be used to configure the behaviour of ELinks in a wide  variety  of
       ways:  protocol  behaviour,  keybindings, colors used for rendering and
       for the user interface.

       It is read at startup  and  saved  only  when  requested.  All  options
       described  in  this document can be fully configured from within ELinks
       so no editing of elinks.conf is needed.

       Note that MIME-related options used for specifying handlers of  various
       MIME  types are NOT described in this document. Documentation for these
       options can be found at the ELinks homepage. Keybindings  can  also  be
       specified  in  elinks.conf.  This is described in the elinkskeys(5) man
       page.

SYNTAX

       The syntax of the configuration file is very  simple.  The  elinks.conf
       file  is  a  free-form ASCII text file. The file may contain extra tabs
       and newlines for formatting purposes. Keywords in the  file  are  case-
       sensitive.  Comments  may  be  placed  anywhere within the file (except
       within quotes). Comments begin with the # character and end at the  end
       of the line.

EXAMPLES

       Some sample settings:

              # Use asynchronous DNS resolver?
              set connection.async_dns = 1
              # horizontal text margin.
              set document.browse.margin_width = 3
              # Default document codepage.
              set document.codepage.assume = "ISO-8859-1"
              # User defined protocol handlers
              set protocol.user.mailto.unix = "mutt %h -s "%s""

OPTIONS

   Bookmarks (bookmarks)
       Bookmark options.

       bookmarks.file_format <num> (default: 0)
              File format for bookmarks (affects both reading and saving):
              0      is the default native ELinks format
              1      is XBEL universal XML bookmarks format (NO NATIONAL CHARS
                     SUPPORT!)

       bookmarks.folder_state [0|1] (default: 1)
              When saving bookmarks also store whether folders are expanded or
              not,  so  the  look of the bookmark dialog is kept across ELinks
              sessions. If disabled all folders will  appear  unexpanded  next
              time ELinks is run.

   Configuration system (config)
       Configuration handling options.

       config.comments <num> (default: 3)
              Amount of comments automatically written to the config file:
              0      is no comments are written
              1      is only the "blurb" (name+type) is written
              2      is only the description is written
              3      is full comments are written

       config.indentation <num> (default: 2)
              Shift  width of one indentation level in the configuration file.
              Zero means that no indentation is performed at all  when  saving
              the configuration.

       config.saving_style <num> (default: 3)
              Determines what happens when you tell ELinks to save options:
              0      is only values of current options are altered
              1      is  values  of  current  options  are altered and missing
                     options are added at the end of the file
              2      is the configuration file is rewritten from scratch
              3      is values of current  options  are  altered  and  missing
                     options  CHANGED  during this ELinks session are added at
                     the end of the file

       config.i18n [0|1] (default: 0)
              If set  to  1,  comments  in  the  configuration  file  will  be
              translated  to  the  language  used by UI. Note that if you have
              different language set in different terminals, the language used
              in  the  configuration  file  MAY be the same as on the terminal
              where you saved the file, but it should be generally  considered
              unpredictable.

       config.saving_style_w [0|1] (default: 0)
              This  is  internal  option  used when displaying a warning about
              obsolete config.saving_style. You shouldn’t touch it.

       config.show_template [0|1] (default: 0)
              Show template  options  in  autocreated  trees  in  the  options
              manager and save them to the configuration file.

   Connections (connection)
       Connection options.

   SSL (connection.ssl)
       SSL options.

   Client Certificates (connection.ssl.client_cert)
       X509 client certificate options.

       connection.ssl.client_cert.enable [0|1] (default: 0)
              Enable or not the sending of X509 client certificates to servers
              which request them.

       connection.ssl.client_cert.file <str> (default: "")
              The location of a file containing  the  client  certificate  and
              unencrypted  private  key  in  PEM  format.  If  unset, the file
              pointed to by the X509_CLIENT_CERT variable is used instead.

       connection.ssl.cert_verify [0|1] (default: 0)
              Verify  the  peer’s  SSL  certificate.  Note  that  this   needs
              extensive configuration of OpenSSL by the user.

       connection.async_dns [0|1] (default: 1)
              Whether to use asynchronous DNS resolving.

       connection.max_connections <num> (default: 10)
              Maximum number of concurrent connections.

       connection.max_connections_to_host <num> (default: 2)
              Maximum number of concurrent connections to a given host.

       connection.receive_timeout <num> (default: 120)
              Receive timeout (in seconds).

       connection.retries <num> (default: 3)
              Number  of  tries  to  establish  a  connection.  Zero means try
              forever.

       connection.try_ipv4 [0|1] (default: 1)
              Whether to try to connect to a host over  IPv4.   Note  that  if
              connection.try_ipv6  is  enabled  too,  it takes precedence. And
              better do not touch this at all unless you are sure what are you
              doing.  Note that you can also force a given protocol to be used
              on a per-connection basis by using an URL in the style  of  i.e.
              http4://elinks.or.cz/.

       connection.try_ipv6 [0|1] (default: 1)
              Whether  to  try  to connect to a host over IPv6.  Note that you
              can also force a given protocol to be used on  a  per-connection
              basis    by    using    an    URL   in   the   style   of   i.e.
              http6://elinks.or.cz/.

       connection.unrestartable_receive_timeout <num> (default: 600)
              Timeout for non-restartable connections (in seconds).

   Cookies (cookies)
       Cookies options.

       cookies.accept_policy <num> (default: 2)
              Cookies accepting policy:
              0      is accept no cookies
              1      is ask for confirmation before accepting cookie
              2      is accept all cookies

       cookies.max_age <num> (default: -1)
              Cookie maximum age (in days):
              -1     is use cookie’s expiration date if any
              0      is force expiration  at  the  end  of  session,  ignoring
                     cookie’s expiration date
              1      +  is  use cookie’s expiration date, but limit age to the
                     given number of days

       cookies.paranoid_security [0|1] (default: 0)
              When enabled, we’ll require three dots in cookies domain for all
              non-international  domains  (instead  of  just  two  dots). Some
              countries  have  generic  second  level  domains  (eg.  .com.pl,
              .co.uk)  and  allowing  sites  to  set cookies for these generic
              domains could potentially be  very  bad.  Note,  it  is  off  by
              default as it breaks a lot of sites.

       cookies.save [0|1] (default: 1)
              Whether cookies should be loaded from and save to disk.

       cookies.resave [0|1] (default: 1)
              Save  cookies  after each change in cookies list? No effect when
              cookie saving (cookies.save) is off.

   Document (document)
       Document options.

   Browsing (document.browse)
       Document browsing options (mainly interactivity).

   Access keys (document.browse.accesskey)
       Options for handling of link access keys.  An HTML document can use the
       ACCESSKEY  attribute  to  assign  an  access key to an element. When an
       access key is pressed, the corresponding element will be given focus.

       document.browse.accesskey.auto_follow [0|1] (default: 0)
              Automatically follow a link or  submit  a  form  if  appropriate
              accesskey  is pressed - this is the standard behaviour, but it’s
              considered dangerous.

       document.browse.accesskey.display [0|1] (default: 0)
              Display access key in link info.

       document.browse.accesskey.priority <num> (default: 0)
              Priority of ’accesskey’ HTML attribute:
              0      is first try all normal  bindings;  if  it  fails,  check
                     accesskey
              1      is  first  try  only  frame  bindings; if it fails, check
                     accesskey
              2      is first check accesskey (this can be dangerous)

   Forms (document.browse.forms)
       Options for handling of the forms interaction.

       document.browse.forms.auto_submit [0|1] (default: 1)
              Automagically submit a form when enter is pressed  with  a  text
              field selected.

       document.browse.forms.confirm_submit [0|1] (default: 1)
              Ask for confirmation when submitting a form.

       document.browse.forms.input_size <num> (default: 20)
              Default form input size if none is specified.

       document.browse.forms.insert_mode [0|1] (default: 1)
              The  setting for this option affects how key presses are handled
              when one selects a text-input form-field. When enabled, one must
              explicitly  ’enter’  a  selected  text-field  to  edit  it; this
              prevents a text  field  from  capturing  key  presses,  such  as
              presses of a scroll key, when it is inadvertently selected. When
              disabled, key presses are always inserted into a  selected  text
              field.

       document.browse.forms.show_formhist [0|1] (default: 0)
              Ask if a login form should be saved to file or not.  This option
              only  disables  the  dialog,  already  saved  login  forms   are
              unaffected.

   Images (document.browse.images)
       Options for handling of images.

       document.browse.images.display_style <num> (default: 2)
              Display style for image tags when displayed:
              0      means always display IMG
              1      means always display filename
              2      means display alt/title attribute if possible, IMG if not
              3      means display alt/title attribute if  possible,  filename
                     if not

       document.browse.images.filename_maxlen <num> (default: 0)
              Maximum length of image filename when displayed:
              0      means always display full filename
              1-500  means display filename with this maximal length; if it is
                     longer, the middle is substituted by an asterisk

       document.browse.images.image_link_tagging <num> (default: 1)
              When to enclose image links:
              0      means never
              1      means never if alt or title are provided (old behavior)
              2      means always

       document.browse.images.image_link_prefix <str> (default: "[")
              Prefix string to use to mark image links.

       document.browse.images.image_link_suffix <str> (default: "]")
              Suffix string to use to mark image links.

       document.browse.images.label_maxlen <num> (default: 0)
              Maximum length of image label (alt/title):
              0      means always display full label
              1-500  means display label with this maximal length;  if  it  is
                     longer, the middle is substituted by an asterisk

       document.browse.images.show_as_links [0|1] (default: 0)
              Display links to images without an alt attribute. If this option
              is off, these images are completely invisible.

       document.browse.images.show_any_as_links [0|1] (default: 1)
              Display links to any images in the document, regardless of  them
              having  an  alt attribute or not. If this option is off, the alt
              attribute contents is shown, but as normal text, not  selectable
              as a link.

   Links (document.browse.links)
       Options for handling of links to other documents.

   Active link (document.browse.links.active_link)
       Options for the active link.

   Colors (document.browse.links.active_link.colors)
       Active link colors.

       document.browse.links.active_link.colors.background     <color|#rrggbb>
       (default: blue)
              Default background color.

       document.browse.links.active_link.colors.text <color|#rrggbb> (default:
       black)
              Default text color.

       document.browse.links.active_link.enable_color [0|1] (default: 0)
              Enable use of the active link background and text color settings
              instead of the link colors from the document.

       document.browse.links.active_link.bold [0|1] (default: 0)
              Make the active link text bold.

       document.browse.links.active_link.invert [0|1] (default: 1)
              Invert the fore- and background color so the link stands out.

       document.browse.links.active_link.underline [0|1] (default: 0)
              Underline the active link.

       document.browse.links.color_dirs [0|1] (default: 1)
              Highlight links  to  directories  in  FTP  and  local  directory
              listing.

       document.browse.links.numbering [0|1] (default: 0)
              Display numbers next to the links.

       document.browse.links.target_blank <num> (default: 0)
              Define how to handle links having target=_blank set:
              0      means open link in current tab
              1      means open link in new tab in foreground
              2      means open link in new tab in background

       document.browse.links.use_tabindex [0|1] (default: 1)
              Whether  to  navigate  links  using tabindex specified ordering.
              The TABINDEX attribute in HTML elements specifies the  order  in
              which  links  should  receive  focus  when using the keyboard to
              navigating the document.

       document.browse.links.number_keys_select_link <num> (default: 1)
              Number keys select links rather than specify  command  prefixes.
              This is a tristate:
              0      means never
              1      means if document.browse.links.numbering = 1
              2      means always

       document.browse.links.warn_malicious [0|1] (default: 1)
              When following a link the user ID part of the URI is checked and
              if a maliciously crafted URI is detected a warning  dialog  will
              ask before following the link.

       document.browse.links.wraparound [0|1] (default: 0)
              When  pressing  ’down’  on the last link, jump at the first one,
              and vice versa.

   Scrolling (document.browse.scrolling)
       Scrolling options.

       document.browse.scrolling.horizontal_extended [0|1] (default: 1)
              Whether to allow horizontal scrolling when the document does not
              extend off the screen. Useful for copy/paste operations.

       document.browse.scrolling.horizontal_step <num> (default: 8)
              Number  of  columns to scroll when a key bound to scroll-left or
              scroll- right is pressed and no prefix was given.

       document.browse.scrolling.margin <num> (default: 3)
              Size of the virtual margin -  when  you  click  inside  of  that
              margin, document scrolls in that direction.

       document.browse.scrolling.vertical_step <num> (default: 2)
              Number  of  lines  to  scroll  when  a key bound to scroll-up or
              scroll- down is pressed and no prefix was given.

   Searching (document.browse.search)
       Options for searching.

       document.browse.search.case [0|1] (default: 0)
              Whether  the  search  should  match  the  document  text   while
              maintaining case sensitivity.

       document.browse.search.regex <num> (default: 0)
              Enable searching with regular expressions:
              0      for plain text searching
              1      for basic regular expression searches
              2      for extended regular expression searches

       document.browse.search.show_hit_top_bottom [0|1] (default: 1)
              Whether  to  show a dialog when the search hits top or bottom of
              the document.

       document.browse.search.wraparound [0|1] (default: 1)
              Wrap around when searching. Currently only used for typeahead.

       document.browse.search.show_not_found <num> (default: 2)
              How to inform the user when nothing is matched:
              0      means do nothing
              1      means beep the terminal
              2      means pop up message box

       document.browse.search.typeahead <num> (default: 0)
              Start typeahead searching when an unbound key is pressed without
              any  modifiers.  Note  that  most keys have default bindings, so
              this feature will not be useful unless you unbind them.

       when you (when you press a key bound to search-typeahead or similar)
              1 automatically starts typeahead  searching  thru  link  text  2
              automatically starts typeahead searching thru all document text

       document.browse.margin_width <num> (default: 3)
              Horizontal text margin.

       document.browse.refresh [0|1] (default: 1)
              Automatically   follow   document-specified  refresh  directives
              (’<meta> refresh’ tags). Web-page authors use these to  instruct
              the  browser to reload a document at a given interval or to load
              another page.  Regardless  of  the  value  the  refresh  URI  is
              accessible        as        a        link.         Use       the
              document.browse.minimum_refresh_time  to  control  the   minimum
              number of seconds a refresh will wait.

       document.browse.minimum_refresh_time <num> (default: 1000)
              The  minimum  number  of  milliseconds  that  should pass before
              refreshing. If set to zero the document  refresh  time  is  used
              unchanged.  It can fix going back in history for some sites that
              use refreshing with zero values.

       document.browse.table_move_order [0|1] (default: 0)
              Move by columns in table, instead of rows.

   Cache (document.cache)
       Cache options.

   Formatted documents (document.cache.format)
       Format cache options.

       document.cache.format.size <num> (default: 5)
              Number of cached formatted pages. Do not get too generous  here,
              ’formatted’  means that all the accompanying structures are kept
              in memory so that you get the cached document immediatelly,  but
              these structures may take a lot - 2x the size of the HTML source
              is probably not unusual, but it can be even more if the document
              consists of a lot of short lines (padded right, if possible) and
              links and not much other markup.  So if you set this to 256  and
              then   you  don’t  like  your  ELinks  eating  90M,  don’t  come
              complaining to us. ;-) Also note that the format cache itself is
              not counted to the memory cache size, but the HTML source of the
              formatted documents is always cached, even if  it  is  over  the
              memory  cache size threshold. (Then of course no other documents
              can be cached.)

   Memory cache (document.cache.memory)
       Memory cache options.

       document.cache.memory.size <num> (default: 1048576)
              Memory cache size (in bytes).

       document.cache.cache_redirects [0|1] (default: 0)
              Cache even redirects sent by server (usually thru HTTP by a  302
              HTTP  code  and  a  Location  header).  This  was  the  original
              behaviour for a quite some time, but it  causes  problems  in  a
              situation very common to various web login systems - frequently,
              when accessing certain location, they will  redirect  you  to  a
              login  page if they don’t receive an auth cookie, the login page
              then gives you the cookie and redirects you back to the original
              page,  but  there  you  have already cached redirect back to the
              login page! If this option has value of 0, this  malfunction  is
              fixed,  but occasionally you may get superfluous (depends on how
              you take it ;-) requests to the server. If this option has value
              of  1,  experienced  users  can  still  workaround  it by clever
              combination of  usage  of  reload,  jumping  around  in  session
              history  and  hitting  ctrl+enter.   Note  that  this  option is
              checked when retrieving the information  from  cache,  not  when
              saving  it  to cache - thus if you will enable it, even previous
              redirects will be taken from cache instead of asking the server.

       document.cache.ignore_cache_control [0|1] (default: 1)
              Ignore  Cache-Control  and Pragma server headers.  When set, the
              document is cached even with ’Cache-Control: no-cache’.

   Charset (document.codepage)
       Charset options.

       document.codepage.assume <codepage> (default: System)
              Default  document  codepage.  ’System’  stands  for  a  codepage
              determined by a selected locale.

       document.codepage.force_assumed [0|1] (default: 0)
              Ignore charset info sent by server.

   Default color settings (document.colors)
       Default document color settings.

       document.colors.text <color|#rrggbb> (default: gray75)
              Default text color.

       document.colors.background <color|#rrggbb> (default: black)
              Default background color.

       document.colors.link <color|#rrggbb> (default: blue)
              Default link color.

       document.colors.vlink <color|#rrggbb> (default: yellow)
              Default visited link color.

       document.colors.image <color|#rrggbb> (default: darkolivegreen)
              Default image link color.

       document.colors.bookmark <color|#rrggbb> (default: hotpink)
              Default bookmarked link color.

       document.colors.dirs <color|#rrggbb> (default: yellow)
              Default  directory  color.  See document.browse.links.color_dirs
              option.

       document.colors.allow_dark_on_black [0|1] (default: 0)
              Allow dark colors on black  background,  and  bright  colors  on
              bright  background.  By  default  the colors have their contrast
              increased, so that the foreground and the background do not have
              too  similar  colors.  This option turns this off. Note, this is
              different from having it  ensured  through  the  ensure_contrast
              option.

       document.colors.ensure_contrast [0|1] (default: 1)
              Makes  sure that the back- and foreground color are never equal.

       document.colors.use_document_colors <num> (default: 2)
              Use colors specified in document:
              0      is use always the default settings
              1      is use document colors if available, except background
              2      is use document colors, including  background.  This  can
                     mostly  look  very impressive, but some sites will appear
                     really ugly. Note, that obviously if  the  background  is
                     not black, it will break the behaviour of transparency.

   Cascading Style Sheets (document.css)
       Options concerning how to use CSS for styling documents.

       document.css.enable [0|1] (default: 1)
              Enable adding of CSS style info to documents.

       document.css.import [0|1] (default: 1)
              When  enabled  any  external style sheets that are imported from
              either CSS itself using the @import keyword  or  from  the  HTML
              using   <link>   tags  in  the  document  header  will  also  be
              downloaded.

       document.css.stylesheet <str> (default: "")
              The path  to  the  file  containing  the  default  user  defined
              Cascading  Style  Sheet.  It  can  be  used to control the basic
              layout of HTML documents. The path is assumed to be relative  to
              ELinks’  home  directory.   Leave as "" to use built-in document
              styling.

   Downloading (document.download)
       Options regarding files downloading and handling.

       document.download.directory <str> (default: "./")
              Default download directory.

       document.download.set_original_time [0|1] (default: 0)
              Set the timestamp of  each  downloaded  file  to  the  timestamp
              stored on the server.

       document.download.overwrite <num> (default: 2)
              Prevent overwriting the local files:
              0      is files will silently be overwritten
              1      is add a suffix .{number} (for example ’.1’) to the name
              2      is ask the user

       document.download.notify_bell <num> (default: 0)
              Audio notification when download is completed:
              0      is never
              1      is when background notification is active
              2      is always

   Dump output (document.dump)
       Dump output options.

       document.dump.codepage <codepage> (default: System)
              Codepage  used  in  dump  output. ’System’ stands for a codepage
              determined by a selected locale.

       document.dump.header <str> (default: "")
              Header string used in dumps. %u is substituted by URL.

       document.dump.footer <str> (default: "")
              Footer string used in dumps. %u is substituted by URL.

       document.dump.separator <str> (document.dump.separator <str>  (default:
       ")

       document.dump.width <num> (default: 80)
              Width of screen in characters when dumping documents.

   History (document.history)
       History options.

   Global history (document.history.global)
       Global history options.

       document.history.global.enable [0|1] (default: 1)
              Enable global history ("history of all pages visited").

       document.history.global.max_items <num> (default: 1024)
              Maximum number of entries in the global history.

       document.history.global.display_type <num> (default: 0)
              What to display in global history dialog:
              0      is URLs
              1      is page titles

       document.history.keep_unhistory [0|1] (default: 1)
              Keep unhistory ("forward history").

   HTML rendering (document.html)
       Options concerning the display of HTML pages.

       document.html.display_frames [0|1] (default: 1)
              Display frames.

       document.html.display_tables [0|1] (default: 1)
              Display tables.

       document.html.display_subs [0|1] (default: 1)
              Display subscripts (as [thing]).

       document.html.display_sups [0|1] (default: 1)
              Display superscripts (as ^thing).

       document.html.link_display <num> (default: 2)
              How to render <link> tags from the HTML header:
              0      is nothing
              1      is title
              2      is name in addition
              3      is hreflang in addition
              4      is type in addition
              5      is everything

       document.html.underline_links [0|1] (default: 0)
              Underline links.

       document.html.wrap_nbsp [0|1] (default: 0)
              If set do not honour non breaking space (the  nbsp  entity)  but
              allow  to  wrap  the  text.  This  can help keeping the width of
              documents down so no horizontal scrolling is needed.

   Plain rendering (document.plain)
       Options concerning the display of plain text pages.

       document.plain.display_links [0|1] (default: 0)
              Display URIs in the document as links.

       document.plain.compress_empty_lines [0|1] (default: 0)
              Compress successive empty lines to only one in displayed text.

   URI passing (document.uri_passing)
       Rules for passing URIs to external commands.

       document.uri_passing._template_ <str> (default: "")
              A rule for passing URI to an external command.  The  format  is:
              %c  in  the  string means the current URL %% in the string means
              ’%’

   ECMAScript (ecmascript)
       ECMAScript options.

       ecmascript.enable [0|1] (default: 1)
              Whether to run those scripts inside of documents.

       ecmascript.error_reporting [0|1] (default: 0)
              Open a message box when a script reports an error.

       ecmascript.max_exec_time <num> (default: 5)
              Maximum execution time in seconds for a script.

       ecmascript.block_window_opening [0|1] (default: 0)
              Whether to disallow scripts to open new windows or tabs.

   Information files (infofiles)
       Options for information files in ~/.elinks.

       infofiles.save_interval <num> (default: 300)
              Interval at which to trigger information files in  ~/.elinks  to
              be saved to disk if they has changed (seconds; 0 to disable)

       infofiles.secure_save [0|1] (default: 1)
              First write data to unique temporary file, then rename this file
              upon successfully finishing this. Note that this relates only to
              config  files,  not downloaded files. You may want to disable it
              if you are using some exotic permissions  for  concerned  files.
              Secure file saving is automagically disabled if file is symlink.
              Warning: some systems (ie. OS/2, Win32) require that destination
              file doesn’t exist when rename(3) is called, breaking atomicity,
              and reducing reliability of this feature.

       infofiles.secure_save_fsync [0|1] (default: 1)
              When using secure file saving, call fsync(3), if the OS supports
              it,  to  force the OS immediately to write the data to permanent
              storage. This is optional for those who wish to avoid  excessive
              disk I/O.

   MIME (mime)
       MIME-related options (handlers of various MIME types).

   File extension associations (mime.extension)
       Extension <-> MIME type association.

       mime.extension._template_ <str> (default: "")
              MIME-type  matching  this  file  extension  (’*’ is used here in
              place of ’.’).

   File type handlers (mime.handler)
       A file type handler is a  set  of  information  about  how  to  use  an
       external  program  to  view  a  file. It is possible to refer to it for
       several MIME types -- e.g., you can define an ’image’ handler to  which
       mime.type.image.png, mime.type.image.jpeg, and so on will refer; or one
       might define a handler for a more specific type of file  --  e.g.,  PDF
       files.   Note  you  must  define  both  a  MIME handler and a MIME type
       association for it to work.

   Template option folder (mime.handler._template_)
       Description of this handler.

   Template option folder (mime.handler._template_._template_)
       System-specific handler description (ie. unix, unix-xwin, ...).

       mime.handler._template_._template_.ask [0|1] (default: 1)
              Ask before opening.

       mime.handler._template_._template_.block [0|1] (default: 1)
              Block the terminal when the handler is running.

       mime.handler._template_._template_.program <str> (default: "")
              External viewer for this file type. ’%’ in this string  will  be
              substituted by a file name.

   Mailcap (mime.mailcap)
       Options for mailcap support.

       mime.mailcap.enable [0|1] (default: 1)
              Enable mailcap support.

       mime.mailcap.path                    <str>                    (default:
       "~/.mailcap:/etc/mailcap:/usr/etc/mailcap:/usr/local/etc/mailcap:/usr/share/mailcap:/usr/share/misc/mailcap")
              Mailcap search path. Colon-separated list of files.  Leave as ""
              to use MAILCAP environment variable instead.

       mime.mailcap.ask [0|1] (default: 1)
              Ask before using the handlers defined by mailcap.

       mime.mailcap.description <num> (default: 0)
              Type of description to show in "what to do with this file" query
              dialog:
              0      is show "mailcap"
              1      is show program to be run
              2      is  show  mailcap  description  field  if  any; "mailcap"
                     otherwise

       mime.mailcap.prioritize [0|1] (default: 1)
              Prioritize entries by the order of  the  files  in  the  mailcap
              path. This means that wildcard entries (like: image/*) will also
              be checked before deciding the handler.

   Mimetypes files (mime.mimetypes)
       Options for the support of mime.types files. These files can be used to
       find the content type of an URL by looking at the extension of the file
       name.

       mime.mimetypes.enable [0|1] (default: 1)
              Enable mime.types support.

       mime.mimetypes.path                   <str>                   (default:
       "~/.mime.types:/etc/mime.types:/usr/etc/mime.types:/usr/local/etc/mime.types:/usr/share/mime.types:/usr/share/misc/mime.types")
              The search path for mime.types files.  Colon-separated  list  of
              files.

   MIME type associations (mime.type)
       Handler <-> MIME type association. The first sub-tree is the MIME class
       while the second sub-tree is the MIME type (ie. image/gif handler  will
       reside  at  mime.type.image.gif).  Each MIME type option should contain
       (case-sensitive) name of the MIME handler (its properties are stored at
       mime.handler.<name>).

   Template option folder (mime.type._template_)
       Handler  matching  this  MIME-type  class (’*’ is used here in place of
       ’.’).

       mime.type._template_._template_ <str> (default: "")
              Handler matching this MIME-type name (’*’ is used here in  place
              of ’.’).

       mime.default_type <str> (default: "application/octet-stream")
              Document  MIME-type  to assume by default (when we are unable to
              guess it properly from known information about the document).

   Protocols (protocol)
       Protocol specific options.

   Local files (protocol.file)
       Options specific to local browsing.

   Local CGI (protocol.file.cgi)
       Local CGI specific options.

       protocol.file.cgi.path <str> (default: "")
              Colon separated list  of  directories,  where  CGI  scripts  are
              stored.

       protocol.file.cgi.policy [0|1] (default: 0)
              Whether to execute local CGI scripts.

       protocol.file.allow_special_files [0|1] (default: 0)
              Whether  to allow reading from non-regular files.  Note this can
              be dangerous; reading /dev/urandom or /dev/zero  can  ruin  your
              day!

       protocol.file.show_hidden_files [0|1] (default: 1)
              When  set  to false, files with name starting with a dot will be
              hidden in local directories listing.

       protocol.file.try_encoding_extensions [0|1] (default: 1)
              When set, if we can’t open a file named ’filename’, we’ll try to
              open  ’filename’  with  some  encoding  extension  appended (ie.
              ’filename.gz’); it depends on the supported encodings.

   FTP (protocol.ftp)
       FTP specific options.

   Proxy configuration (protocol.ftp.proxy)
       FTP proxy configuration.

       protocol.ftp.proxy.host <str> (default: "")
              Host and port-number (host:port) of the FTP proxy, or blank.  If
              it’s blank, FTP_PROXY environment variable is checked as well.

       protocol.ftp.anon_passwd <str> (default: "some@host.domain")
              FTP anonymous password to be sent.

       protocol.ftp.use_pasv [0|1] (default: 1)
              Use PASV instead of PORT (passive vs active mode, IPv4 only).

       protocol.ftp.use_epsv [0|1] (default: 0)
              Use EPSV instead of EPRT (passive vs active mode, IPv6 only).

   HTTP (protocol.http)
       HTTP-specific options.

   Server bug workarounds (protocol.http.bugs)
       Server-side HTTP bugs workarounds.

       protocol.http.bugs.accept_charset [0|1] (default: 1)
              The  Accept-Charset  header  is  quite  long  and sending it can
              trigger bugs in some rarely found servers.

       protocol.http.bugs.allow_blacklist [0|1] (default: 1)
              Allow blacklisting of buggy servers.

       protocol.http.bugs.broken_302_redirect [0|1] (default: 1)
              Broken 302 redirect (violates RFC but compatible with Netscape).
              This  is  a  problem  for a lot of web discussion boards and the
              like.  If they will do strange things to you, try to  play  with
              this.

       protocol.http.bugs.post_no_keepalive [0|1] (default: 0)
              Disable keepalive connection after POST request.

       protocol.http.bugs.http10 [0|1] (default: 0)
              Use HTTP/1.0 protocol instead of HTTP/1.1.

   Proxy configuration (protocol.http.proxy)
       HTTP proxy configuration.

       protocol.http.proxy.host <str> (default: "")
              Host  and  port-number  (host:port) of the HTTP proxy, or blank.
              If it’s blank, HTTP_PROXY environment  variable  is  checked  as
              well.

       protocol.http.proxy.user <str> (default: "")
              Proxy authentication username.

       protocol.http.proxy.passwd <str> (default: "")
              Proxy authentication password.

   Referer sending (protocol.http.referer)
       HTTP  referer sending options. HTTP referer is a special header sent in
       the HTTP requests, which is  supposed  to  contain  the  previous  page
       visited by the browser. This way, the server can know what link did you
       follow  when  accessing  that  page.  However,   this   behaviour   can
       unfortunately  considerably  affect  privacy  and  can  lead  even to a
       security problem on some badly designed web pages.

       protocol.http.referer.policy <num> (default: 3)
              Mode of sending HTTP referer:
              0      is send no referer
              1      is send current URL as referer
              2      is send fixed fake referer
              3      is send previous URL as referer (correct, but insecure)

       protocol.http.referer.fake <str> (default: "")
              Fake referer to be sent when policy is 2.

       protocol.http.accept_language <str> (default: "")
              Send Accept-Language header.

       protocol.http.accept_ui_language [0|1] (default: 1)
              Request localised versions of documents from web-servers  (using
              the   Accept-Language   header)  using  the  language  you  have
              configured  for  ELinks’  user-interface  (this   also   affects
              navigator.language  ECMAScript value available to scripts). Note
              that some see this as a potential security risk because it tells
              web-masters and the FBI sniffers about your language preference.

       protocol.http.trace [0|1] (default: 0)
              If active, all HTTP requests are sent with TRACE as their method
              rather  than  GET  or POST. This is useful for debugging of both
              ELinks and various  server-side  scripts  ---  the  server  only
              returns  the  client’s request back to the client verbatim. Note
              that this type of request may not be enabled on all servers.

       protocol.http.user_agent  <str>  (default:  "ELinks/%v  (textmode;  %s;
       %t-%b)")
              Change the User Agent  ID.  That  means  identification  string,
              which  is  sent to HTTP server when a document is requested. The
              ’textmode’ token in the first field is  our  silent  attempt  to
              establish  this  as  a standard for new textmode user agents, so
              that the webmasters can have just  a  single  uniform  test  for
              these  if  they  are  ie.  pushing  some  lite  version  to them
              automagically.  %v in the string means ELinks version %s in  the
              string  means  system identification %t in the string means size
              of the terminal %b in the string means number of bars  displayed
              by  ELinks Use " " if you don’t want any User-Agent header to be
              sent at all.

   HTTPS (protocol.https)
       HTTPS-specific options.

   Proxy configuration (protocol.https.proxy)
       HTTPS proxy configuration.

       protocol.https.proxy.host <str> (default: "")
              Host and port-number (host:port) of the HTTPS CONNECT proxy,  or
              blank.   If  it’s  blank,  HTTPS_PROXY  environment  variable is
              checked as well.

   NNTP (protocol.nntp)
       NNTP and news specific options.

       protocol.nntp.server <str> (default: "")
              Used when resolving news: URIs. If set to the empty  string  the
              value of the NNTPSERVER environment variable will be used.

       protocol.nntp.header_entries               <str>              (default:
       "Subject,From,Date,Message-ID,Newsgroups")
              Comma  separated  list of which entries in the article header to
              show. E.g. ’Subject’ and ’From’.  All header entries can be read
              in the header info dialog.

   URI rewriting (protocol.rewrite)
       Rules  for  rewriting  URIs  entered  in  the goto dialog.  It makes it
       possible to define a set of prefixes that  will  be  expanded  if  they
       match  a  string entered in the goto dialog.  The prefixes can be dumb,
       meaning that they work only like  URI  abbreviations,  or  smart  ones,
       making  it  possible  to  pass  arguments  to  them  like search engine
       keywords.

   Dumb Prefixes (protocol.rewrite.dumb)
       Dumb prefixes, see enable-dumb description for details.

       protocol.rewrite.dumb._template_ <str> (default: "")
              Replacement URI for this dumbprefix: %c in the string means  the
              current URL %% in the string means ’%’

   Smart Prefixes (protocol.rewrite.smart)
       Smart prefixes, see enable-smart description for details.

       protocol.rewrite.smart._template_ <str> (default: "")
              Replacement URI for this smartprefix: %c in the string means the
              current URL %s  in  the  string  means  the  whole  argument  to
              smartprefix  %0,%1,...,%9  means argument 0, 1, ..., 9 %% in the
              string means ’%’

       protocol.rewrite.enable-dumb [0|1] (default: 1)
              Enable dumb prefixes - simple URI  abbreviations  which  can  be
              written to the Goto URL dialog instead of actual URIs - i.e.  if
              you   write   ’elinks’    there,    you    are    directed    to
              http://elinks.or.cz/.

       protocol.rewrite.enable-smart [0|1] (default: 1)
              Enable smart prefixes - URI templates triggered by writing given
              abbreviation to the Goto  URL  dialog  followed  by  a  list  of
              arguments from which the actual URI is composed - i.e.

   SMB (protocol.smb)
       SAMBA specific options.

       protocol.smb.credentials <str> (default: "")
              Credentials file passed to smbclient via -A option.

   User protocols (protocol.user)
       User  protocols. Options in this tree specify external handlers for the
       appropriate protocols. Ie.  protocol.user.mailto.unix.

   Template option folder (protocol.user._template_)
       Handler (external program) for this protocol. Name the options in  this
       tree after your system (ie. unix, unix-xwin).

       protocol.user._template_._template_ <str> (default: "")
              Handler  (external program) for this protocol and system.  %f in
              the string means file name to include form data from %h  in  the
              string  means hostname (or email address) %p in the string means
              port %d in the string means path (everything after the port)  %s
              in  the  string means subject (?subject=<this>) %u in the string
              means the whole URL

       protocol.no_proxy <str> (default: "")
              Comma separated list of domains for which the  proxy  (HTTP/FTP)
              should be disabled. Optionally, a port can be specified for some
              domains as well. If it’s blank, NO_PROXY environment variable is
              checked as well.

   Terminals (terminal)
       Terminal options.

   Template option folder (terminal._template_)
       Options specific to this terminal type (according to $TERM value).

       terminal._template_.type <num> (default: 0)
              Terminal  type;  matters  mostly  only  when  drawing frames and
              dialog box borders:
              0      is dumb terminal type, ASCII art
              1      is VT100, simple but portable
              2      is Linux, you get double frames and other goodies
              3      is KOI-8
              4      is FreeBSD

       terminal._template_.m11_hack [0|1] (default: 0)
              Switch fonts when drawing lines, enabling both local  characters
              and  lines working at the same time. Makes sense only with linux
              terminal.

       terminal._template_.utf_8_io [0|1] (default: 0)
              Enable I/O in UTF8 for Unicode terminals. Note  that  currently,
              only  the subset of UTF8 according to terminal codepage is used.

       terminal._template_.restrict_852 [0|1] (default: 0)
              Restrict the characters used when  drawing  lines.  Makes  sense
              only with linux terminals using the cp850/852 character sets.

       terminal._template_.block_cursor [0|1] (default: 0)
              Move  cursor  to bottom right corner when done drawing.  This is
              particularly useful  when  we  have  a  block  cursor,  so  that
              inversed text is displayed correctly.

       terminal._template_.colors <num> (default: 0)
              The  color  mode  controls what colors are used and how they are
              output to the terminal. The color modes are:
              0      is mono mode, only 2 colors are used
              1      is 16 color mode, uses the common ANSI colors
              2      is 256 color mode, uses XTerm RGB codes

       terminal._template_.transparency [0|1] (default: 1)
              If  we  should  not  set  the  background  to  black.  This   is
              particularly  useful  when we have a terminal (typically in some
              windowing environment) with a background image or a  transparent
              background  -  it  will  be visible in ELinks as well. Note that
              this option makes sense only when colors are enabled.

       terminal._template_.underline [0|1] (default: 0)
              If we should use underline or enhance the color instead.

       terminal._template_.charset <codepage> (default: System)
              Codepage of charset used for displaying content on terminal.

   User interface (ui)
       User interface options.

   Clock (ui.clock)
       Digital clock in the status bar.

       ui.clock.enable [0|1] (default: 0)
              Whether to display a digital clock in the status bar.

       ui.clock.format <str> (default: "[%H:%M]")
              Format string for the digital clock. See the strftime(3) manpage
              for details.

   Color settings (ui.colors)
       Default user interface color settings.

   Color terminals (ui.colors.color)
       Color settings for color terminal.

   Main menu bar (ui.colors.color.mainmenu)
       Main menu bar colors.

   Unselected main menu bar item (ui.colors.color.mainmenu.normal)
       Unselected main menu bar item colors.

       ui.colors.color.mainmenu.normal.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.mainmenu.normal.background   <color|#rrggbb>  (default:
       white)
              Default background color.

   Selected main menu bar item (ui.colors.color.mainmenu.selected)
       Selected main menu bar item colors.

       ui.colors.color.mainmenu.selected.text <color|#rrggbb> (default: green)
              Default text color.

       ui.colors.color.mainmenu.selected.background  <color|#rrggbb> (default:
       black)
              Default background color.

   Hotkey (ui.colors.color.mainmenu.hotkey)
       Main menu hotkey colors.

   Unselected hotkey (ui.colors.color.mainmenu.hotkey.normal)
       Main menu unselected hotkey colors.

       ui.colors.color.mainmenu.hotkey.normal.text  <color|#rrggbb>  (default:
       darkred)
              Default text color.

       ui.colors.color.mainmenu.hotkey.normal.background       <color|#rrggbb>
       (default: white)
              Default background color.

   Selected hotkey (ui.colors.color.mainmenu.hotkey.selected)
       Main menu selected hotkey colors.

       ui.colors.color.mainmenu.hotkey.selected.text <color|#rrggbb> (default:
       darkred)
              Default text color.

       ui.colors.color.mainmenu.hotkey.selected.background     <color|#rrggbb>
       (default: green)
              Default background color.

   Menu bar (ui.colors.color.menu)
       Menu bar colors.

   Unselected menu item (ui.colors.color.menu.normal)
       Unselected menu item colors.

       ui.colors.color.menu.normal.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.menu.normal.background <color|#rrggbb> (default: white)
              Default background color.

   Selected menu item (ui.colors.color.menu.selected)
       Selected menu item colors.

       ui.colors.color.menu.selected.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.menu.selected.background    <color|#rrggbb>   (default:
       green)
              Default background color.

   Marked menu item (ui.colors.color.menu.marked)
       Marked menu item colors.

       ui.colors.color.menu.marked.text <color|#rrggbb> (default: red)
              Default text color.

       ui.colors.color.menu.marked.background <color|#rrggbb> (default: white)
              Default background color.

   Hotkey (ui.colors.color.menu.hotkey)
       Menu item hotkey colors.

   Unselected hotkey (ui.colors.color.menu.hotkey.normal)
       Menu item unselected hotkey colors.

       ui.colors.color.menu.hotkey.normal.text    <color|#rrggbb>    (default:
       darkred)
              Default text color.

       ui.colors.color.menu.hotkey.normal.background <color|#rrggbb> (default:
       white)
              Default background color.

   Selected hotkey (ui.colors.color.menu.hotkey.selected)
       Menu item selected hotkey colors.

       ui.colors.color.menu.hotkey.selected.text   <color|#rrggbb>   (default:
       darkred)
              Default text color.

       ui.colors.color.menu.hotkey.selected.background         <color|#rrggbb>
       (default: green)
              Default background color.

   Menu frame (ui.colors.color.menu.frame)
       Menu frame colors.

       ui.colors.color.menu.frame.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.menu.frame.background <color|#rrggbb> (default: white)
              Default background color.

   Dialog (ui.colors.color.dialog)
       Dialog colors.

   Generic (ui.colors.color.dialog.generic)
       Generic dialog colors.

       ui.colors.color.dialog.generic.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.dialog.generic.background   <color|#rrggbb>   (default:
       white)
              Default background color.

   Frame (ui.colors.color.dialog.frame)
       Dialog frame colors.

       ui.colors.color.dialog.frame.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.dialog.frame.background    <color|#rrggbb>    (default:
       white)
              Default background color.

   Scrollbar (ui.colors.color.dialog.scrollbar)
       Scrollbar colors.

       ui.colors.color.dialog.scrollbar.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.dialog.scrollbar.background  <color|#rrggbb>  (default:
       blue)
              Default background color.

   Selected scrollbar (ui.colors.color.dialog.scrollbar-selected)
       Scrollbar selected colors.

       ui.colors.color.dialog.scrollbar-selected.text          <color|#rrggbb>
       (default: black)
              Default text color.

       ui.colors.color.dialog.scrollbar-selected.background    <color|#rrggbb>
       (default: green)
              Default background color.

   Title (ui.colors.color.dialog.title)
       Dialog title colors.

       ui.colors.color.dialog.title.text <color|#rrggbb> (default: darkred)
              Default text color.

       ui.colors.color.dialog.title.background    <color|#rrggbb>    (default:
       white)
              Default background color.

   Text (ui.colors.color.dialog.text)
       Dialog text colors.

       ui.colors.color.dialog.text.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.dialog.text.background <color|#rrggbb> (default: white)
              Default background color.

   Checkbox (ui.colors.color.dialog.checkbox)
       Dialog checkbox colors.

       ui.colors.color.dialog.checkbox.text <color|#rrggbb> (default: darkred)
              Default text color.

       ui.colors.color.dialog.checkbox.background   <color|#rrggbb>  (default:
       white)
              Default background color.

   Selected checkbox (ui.colors.color.dialog.checkbox-selected)
       Dialog selected checkbox colors.

       ui.colors.color.dialog.checkbox-selected.text <color|#rrggbb> (default:
       yellow)
              Default text color.

       ui.colors.color.dialog.checkbox-selected.background     <color|#rrggbb>
       (default: green)
              Default background color.

   Checkbox label (ui.colors.color.dialog.checkbox-label)
       Dialog checkbox label colors.

       ui.colors.color.dialog.checkbox-label.text   <color|#rrggbb>  (default:
       black)
              Default text color.

       ui.colors.color.dialog.checkbox-label.background        <color|#rrggbb>
       (default: white)
              Default background color.

   Button (ui.colors.color.dialog.button)
       Dialog button colors.

       ui.colors.color.dialog.button.text <color|#rrggbb> (default: white)
              Default text color.

       ui.colors.color.dialog.button.background    <color|#rrggbb>   (default:
       blue)
              Default background color.

   Selected button (ui.colors.color.dialog.button-selected)
       Dialog selected button colors.

       ui.colors.color.dialog.button-selected.text  <color|#rrggbb>  (default:
       yellow)
              Default text color.

       ui.colors.color.dialog.button-selected.background       <color|#rrggbb>
       (default: green)
              Default background color.

   Button shortcut (ui.colors.color.dialog.button-shortcut)
       Dialog button colors.

       ui.colors.color.dialog.button-shortcut.text  <color|#rrggbb>  (default:
       yellow)
              Default text color.

       ui.colors.color.dialog.button-shortcut.background       <color|#rrggbb>
       (default: blue)
              Default background color.

   Selected button shortcut (ui.colors.color.dialog.button-shortcut-selected)
       Dialog selected button colors.

       ui.colors.color.dialog.button-shortcut-selected.text    <color|#rrggbb>
       (default: white)
              Default text color.

       ui.colors.color.dialog.button-shortcut-selected.background
       <color|#rrggbb> (default: blue)
              Default background color.

   Text field (ui.colors.color.dialog.field)
       Dialog text field colors.

       ui.colors.color.dialog.field.text <color|#rrggbb> (default: white)
              Default text color.

       ui.colors.color.dialog.field.background <color|#rrggbb> (default: blue)
              Default background color.

   Text field text (ui.colors.color.dialog.field-text)
       Dialog field text colors.

       ui.colors.color.dialog.field-text.text     <color|#rrggbb>    (default:
       yellow)
              Default text color.

       ui.colors.color.dialog.field-text.background  <color|#rrggbb> (default:
       blue)
              Default background color.

   Meter (ui.colors.color.dialog.meter)
       Dialog meter colors.

       ui.colors.color.dialog.meter.text <color|#rrggbb> (default: white)
              Default text color.

       ui.colors.color.dialog.meter.background <color|#rrggbb> (default: blue)
              Default background color.

   Shadow (ui.colors.color.dialog.shadow)
       Dialog shadow colors (see ui.shadows option).

       ui.colors.color.dialog.shadow.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.dialog.shadow.background    <color|#rrggbb>   (default:
       black)
              Default background color.

   Title bar (ui.colors.color.title)
       Title bar colors.

   Generic title bar (ui.colors.color.title.title-bar)
       Generic title bar colors.

       ui.colors.color.title.title-bar.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.title.title-bar.background   <color|#rrggbb>  (default:
       white)
              Default background color.

   Title bar text (ui.colors.color.title.title-text)
       Title bar text colors.

       ui.colors.color.title.title-text.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.title.title-text.background  <color|#rrggbb>  (default:
       white)
              Default background color.

   Status bar (ui.colors.color.status)
       Status bar colors.

   Generic status bar (ui.colors.color.status.status-bar)
       Generic status bar colors.

       ui.colors.color.status.status-bar.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.status.status-bar.background  <color|#rrggbb> (default:
       white)
              Default background color.

   Status bar text (ui.colors.color.status.status-text)
       Status bar text colors.

       ui.colors.color.status.status-text.text    <color|#rrggbb>    (default:
       black)
              Default text color.

       ui.colors.color.status.status-text.background <color|#rrggbb> (default:
       white)
              Default background color.

   Tabs bar (ui.colors.color.tabs)
       Tabs bar colors.

   Unvisited tab (ui.colors.color.tabs.unvisited)
       Tab  colors  for  tabs that have not been selected since they completed
       loading.

       ui.colors.color.tabs.unvisited.text <color|#rrggbb> (default: darkblue)
              Default text color.

       ui.colors.color.tabs.unvisited.background   <color|#rrggbb>   (default:
       white)
              Default background color.

   Unselected tab (ui.colors.color.tabs.normal)
       Unselected tab colors.

       ui.colors.color.tabs.normal.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.tabs.normal.background <color|#rrggbb> (default: white)
              Default background color.

   Loading tab (ui.colors.color.tabs.loading)
       Tab colors for tabs that are loading in the background.

       ui.colors.color.tabs.loading.text <color|#rrggbb> (default: darkred)
              Default text color.

       ui.colors.color.tabs.loading.background    <color|#rrggbb>    (default:
       white)
              Default background color.

   Selected tab (ui.colors.color.tabs.selected)
       Selected tab colors.

       ui.colors.color.tabs.selected.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.tabs.selected.background   <color|#rrggbb>    (default:
       green)
              Default background color.

   Tab separator (ui.colors.color.tabs.separator)
       Tab separator colors.

       ui.colors.color.tabs.separator.text <color|#rrggbb> (default: brown)
              Default text color.

       ui.colors.color.tabs.separator.background   <color|#rrggbb>   (default:
       white)
              Default background color.

   Searched strings (ui.colors.color.searched)
       Searched string highlight colors.

       ui.colors.color.searched.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.searched.background <color|#rrggbb> (default: lime)
              Default background color.

   Non-color terminals (ui.colors.mono)
       Color settings for non-color terminal.

   Main menu bar (ui.colors.mono.mainmenu)
       Main menu bar colors.

   Unselected main menu bar item (ui.colors.mono.mainmenu.normal)
       Unselected main menu bar item colors.

       ui.colors.mono.mainmenu.normal.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.mono.mainmenu.normal.background   <color|#rrggbb>   (default:
       white)
              Default background color.

   Selected main menu bar item (ui.colors.mono.mainmenu.selected)
       Selected main menu bar item colors.

       ui.colors.mono.mainmenu.selected.text <color|#rrggbb> (default: gray)
              Default text color.

       ui.colors.mono.mainmenu.selected.background  <color|#rrggbb>  (default:
       black)
              Default background color.

   Hotkey (ui.colors.mono.mainmenu.hotkey)
       Main menu hotkey colors.

   Unselected hotkey (ui.colors.mono.mainmenu.hotkey.normal)
       Main menu unselected hotkey colors.

       ui.colors.mono.mainmenu.hotkey.normal.text  <color|#rrggbb>   (default:
       black)
              Default text color.

       ui.colors.mono.mainmenu.hotkey.normal.background        <color|#rrggbb>
       (default: white)
              Default background color.

   Selected hotkey (ui.colors.mono.mainmenu.hotkey.selected)
       Main menu selected hotkey colors.

       ui.colors.mono.mainmenu.hotkey.selected.text <color|#rrggbb>  (default:
       black)
              Default text color.

       ui.colors.mono.mainmenu.hotkey.selected.background      <color|#rrggbb>
       (default: white)
              Default background color.

   Menu bar (ui.colors.mono.menu)
       Menu bar colors.

   Unselected menu item (ui.colors.mono.menu.normal)
       Unselected menu item colors.

       ui.colors.mono.menu.normal.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.mono.menu.normal.background <color|#rrggbb> (default: white)
              Default background color.

   Selected menu item (ui.colors.mono.menu.selected)
       Selected menu item colors.

       ui.colors.mono.menu.selected.text <color|#rrggbb> (default: gray)
              Default text color.

       ui.colors.mono.menu.selected.background    <color|#rrggbb>    (default:
       black)
              Default background color.

   Marked menu item (ui.colors.mono.menu.marked)
       Marked menu item colors.

       ui.colors.mono.menu.marked.text <color|#rrggbb> (default: gray)
              Default text color.

       ui.colors.mono.menu.marked.background <color|#rrggbb> (default: white)
              Default background color.

   Hotkey (ui.colors.mono.menu.hotkey)
       Menu item hotkey colors.

   Unselected hotkey (ui.colors.mono.menu.hotkey.normal)
       Menu item unselected hotkey colors.

       ui.colors.mono.menu.hotkey.normal.text <color|#rrggbb> (default: gray)
              Default text color.

       ui.colors.mono.menu.hotkey.normal.background <color|#rrggbb>  (default:
       black)
              Default background color.

   Selected hotkey (ui.colors.mono.menu.hotkey.selected)
       Menu item selected hotkey colors.

       ui.colors.mono.menu.hotkey.selected.text   <color|#rrggbb>    (default:
       gray)
              Default text color.

       ui.colors.mono.menu.hotkey.selected.background          <color|#rrggbb>
       (default: black)
              Default background color.

   Menu frame (ui.colors.mono.menu.frame)
       Menu frame colors.

       ui.colors.mono.menu.frame.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.mono.menu.frame.background <color|#rrggbb> (default: white)
              Default background color.

   Dialog (ui.colors.mono.dialog)
       Dialog colors.

   Generic (ui.colors.mono.dialog.generic)
       Generic dialog colors.

       ui.colors.mono.dialog.generic.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.mono.dialog.generic.background   <color|#rrggbb>    (default:
       white)
              Default background color.

   Frame (ui.colors.mono.dialog.frame)
       Dialog frame colors.

       ui.colors.mono.dialog.frame.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.mono.dialog.frame.background <color|#rrggbb> (default: white)
              Default background color.

   Scrollbar (ui.colors.mono.dialog.scrollbar)
       Scrollbar colors.

       ui.colors.mono.dialog.scrollbar.text <color|#rrggbb> (default: white)
              Default text color.

       ui.colors.mono.dialog.scrollbar.background  <color|#rrggbb>   (default:
       black)
              Default background color.

   Selected scrollbar (ui.colors.mono.dialog.scrollbar-selected)
       Scrollbar selected colors.

       ui.colors.mono.dialog.scrollbar-selected.text <color|#rrggbb> (default:
       black)
              Default text color.

       ui.colors.mono.dialog.scrollbar-selected.background     <color|#rrggbb>
       (default: white)
              Default background color.

   Title (ui.colors.mono.dialog.title)
       Dialog title colors.

       ui.colors.mono.dialog.title.text <color|#rrggbb> (default: gray)
              Default text color.

       ui.colors.mono.dialog.title.background <color|#rrggbb> (default: black)
              Default background color.

   Text (ui.colors.mono.dialog.text)
       Dialog text colors.

       ui.colors.mono.dialog.text.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.mono.dialog.text.background <color|#rrggbb> (default: white)
              Default background color.

   Checkbox (ui.colors.mono.dialog.checkbox)
       Dialog checkbox colors.

       ui.colors.mono.dialog.checkbox.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.mono.dialog.checkbox.background   <color|#rrggbb>   (default:
       white)
              Default background color.

   Selected checkbox (ui.colors.mono.dialog.checkbox-selected)
       Dialog selected checkbox colors.

       ui.colors.mono.dialog.checkbox-selected.text <color|#rrggbb>  (default:
       white)
              Default text color.

       ui.colors.mono.dialog.checkbox-selected.background      <color|#rrggbb>
       (default: black)
              Default background color.

   Checkbox label (ui.colors.mono.dialog.checkbox-label)
       Dialog checkbox label colors.

       ui.colors.mono.dialog.checkbox-label.text   <color|#rrggbb>   (default:
       black)
              Default text color.

       ui.colors.mono.dialog.checkbox-label.background         <color|#rrggbb>
       (default: white)
              Default background color.

   Button (ui.colors.mono.dialog.button)
       Dialog button colors.

       ui.colors.mono.dialog.button.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.mono.dialog.button.background    <color|#rrggbb>    (default:
       white)
              Default background color.

   Selected button (ui.colors.mono.dialog.button-selected)
       Dialog selected button colors.

       ui.colors.mono.dialog.button-selected.text  <color|#rrggbb>   (default:
       white)
              Default text color.

       ui.colors.mono.dialog.button-selected.background        <color|#rrggbb>
       (default: black)
              Default background color.

   Button shortcut (ui.colors.mono.dialog.button-shortcut)
       Dialog button colors.

       ui.colors.mono.dialog.button-shortcut.text  <color|#rrggbb>   (default:
       white)
              Default text color.

       ui.colors.mono.dialog.button-shortcut.background        <color|#rrggbb>
       (default: black)
              Default background color.

   Selected button shortcut (ui.colors.mono.dialog.button-shortcut-selected)
       Dialog selected button colors.

       ui.colors.mono.dialog.button-shortcut-selected.text     <color|#rrggbb>
       (default: black)
              Default text color.

       ui.colors.mono.dialog.button-shortcut-selected.background
       <color|#rrggbb> (default: white)
              Default background color.

   Text field (ui.colors.mono.dialog.field)
       Dialog text field colors.

       ui.colors.mono.dialog.field.text <color|#rrggbb> (default: gray)
              Default text color.

       ui.colors.mono.dialog.field.background <color|#rrggbb> (default: black)
              Default background color.

   Text field text (ui.colors.mono.dialog.field-text)
       Dialog field text colors.

       ui.colors.mono.dialog.field-text.text <color|#rrggbb> (default: gray)
              Default text color.

       ui.colors.mono.dialog.field-text.background  <color|#rrggbb>  (default:
       black)
              Default background color.

   Meter (ui.colors.mono.dialog.meter)
       Dialog meter colors.

       ui.colors.mono.dialog.meter.text <color|#rrggbb> (default: gray)
              Default text color.

       ui.colors.mono.dialog.meter.background <color|#rrggbb> (default: black)
              Default background color.

   Shadow (ui.colors.mono.dialog.shadow)
       Dialog shadow colors (see ui.shadows option).

       ui.colors.mono.dialog.shadow.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.mono.dialog.shadow.background    <color|#rrggbb>    (default:
       black)
              Default background color.

   Title bar (ui.colors.mono.title)
       Title bar colors.

   Generic title bar (ui.colors.mono.title.title-bar)
       Generic title bar colors.

       ui.colors.mono.title.title-bar.text <color|#rrggbb> (default: gray)
              Default text color.

       ui.colors.mono.title.title-bar.background   <color|#rrggbb>   (default:
       black)
              Default background color.

   Title bar text (ui.colors.mono.title.title-text)
       Title bar text colors.

       ui.colors.mono.title.title-text.text <color|#rrggbb> (default: gray)
              Default text color.

       ui.colors.mono.title.title-text.background  <color|#rrggbb>   (default:
       black)
              Default background color.

   Status bar (ui.colors.mono.status)
       Status bar colors.

   Generic status bar (ui.colors.mono.status.status-bar)
       Generic status bar colors.

       ui.colors.mono.status.status-bar.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.mono.status.status-bar.background  <color|#rrggbb>  (default:
       white)
              Default background color.

   Status bar text (ui.colors.mono.status.status-text)
       Status bar text colors.

       ui.colors.mono.status.status-text.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.mono.status.status-text.background <color|#rrggbb>  (default:
       white)
              Default background color.

   Tabs bar (ui.colors.mono.tabs)
       Tabs bar colors.

   Unvisited tab (ui.colors.mono.tabs.unvisited)
       Tab colors for tabs that have not been selected  since  they  completed
       loading.

       ui.colors.mono.tabs.unvisited.text <color|#rrggbb> (default: gray)
              Default text color.

       ui.colors.mono.tabs.unvisited.background    <color|#rrggbb>   (default:
       white)
              Default background color.

   Unselected tab (ui.colors.mono.tabs.normal)
       Unselected tab colors.

       ui.colors.mono.tabs.normal.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.mono.tabs.normal.background <color|#rrggbb> (default: white)
              Default background color.

   Loading tab (ui.colors.mono.tabs.loading)
       Tab colors for tabs that are loading in the background.

       ui.colors.mono.tabs.loading.text <color|#rrggbb> (default: gray)
              Default text color.

       ui.colors.mono.tabs.loading.background <color|#rrggbb> (default: white)
              Default background color.

   Selected tab (ui.colors.mono.tabs.selected)
       Selected tab colors.

       ui.colors.mono.tabs.selected.text <color|#rrggbb> (default: gray)
              Default text color.

       ui.colors.mono.tabs.selected.background    <color|#rrggbb>    (default:
       black)
              Default background color.

   Tab separator (ui.colors.mono.tabs.separator)
       Tab separator colors.

       ui.colors.mono.tabs.separator.text <color|#rrggbb> (default: gray)
              Default text color.

       ui.colors.mono.tabs.separator.background    <color|#rrggbb>   (default:
       white)
              Default background color.

   Searched strings (ui.colors.mono.searched)
       Searched string highlight colors.

       ui.colors.mono.searched.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.mono.searched.background <color|#rrggbb> (default: white)
              Default background color.

   Dialog settings (ui.dialogs)
       Dialogs-specific appearance and behaviour settings.

       ui.dialogs.listbox_min_height <num> (default: 10)
              Minimal height of the listbox widget (used e.g. for bookmarks or
              global history).

       ui.dialogs.shadows [0|1] (default: 0)
              Make dialogs drop shadows (the shadows are solid, you can adjust
              their  color by ui.colors.*.dialog.shadow). You may also want to
              eliminate the wide borders by adjusting setup.h.

       ui.dialogs.underline_hotkeys [0|1] (default: 0)
              Whether to underline hotkeys in menus to make them more visible.
              Requires the underlining is enabled for the terminal.

       ui.dialogs.underline_button_shortcuts [0|1] (default: 0)
              Whether to underline button shortcuts to make them more visible.
              Requires the underlining is enabled for the terminal.

   LEDs (ui.leds)
       LEDs (visual indicators) options.

       ui.leds.enable [0|1] (default: 1)
              Enable LEDs.  These visual  indicators  will  inform  you  about
              various states.

   Sessions (ui.sessions)
       Sessions settings.

       ui.sessions.auto_restore [0|1] (default: 0)
              Automatically  restore  the  session  at  start.   This  feature
              requires bookmark support.

       ui.sessions.auto_save [0|1] (default: 0)
              Automatically save the  session  when  quitting.   This  feature
              requires bookmark support.

       ui.sessions.auto_save_foldername <str> (default: "Auto saved session")
              Name  of the bookmarks folder used for auto saving and restoring
              session.  The name has to be unique. Any folders with  the  same
              name  will  be  deleted.   This  only  makes sense with bookmark
              support.

       ui.sessions.homepage <str> (default: "")
              The URI to load either at startup time when no URI was given  on
              the  command line or when requested by the goto-url-home action.
              Set to "" if the environment variable WWW_HOME should be used as
              homepage URI instead.

       ui.sessions.snapshot [0|1] (default: 0)
              Automatically  save  a  snapshot of all tabs periodically.  This
              will periodically bookmark  the  tabs  of  each  terminal  in  a
              separate folder for recovery after a crash.

   Window tabs (ui.tabs)
       Window tabs settings.

       ui.tabs.show_bar <num> (default: 1)
              Show tabs bar on the screen:
              0      means never
              1      means only if two or more tabs are open
              2      means always

       ui.tabs.wraparound [0|1] (default: 1)
              When  moving right from the last tab, jump at the first one, and
              vice versa.

       ui.tabs.confirm_close [0|1] (default: 0)
              When closing a tab show confirmation dialog.

   Timer options (ui.timer)
       Timed action after certain interval of  user  inactivity.  Someone  can
       even find this useful, although you may not believe that.

       ui.timer.enable <num> (default: 0)
              Whether to enable the timer or not:
              0      is don’t count down anything
              1      is count down, but don’t show the timer
              2      is count down and show the timer near LEDs

       ui.timer.duration <num> (default: 86400)
              Inactivity  timeout in seconds. The maximum of one day should be
              enough for just everyone (TM).

       ui.timer.action <str> (default: "")
              Keybinding action to be triggered when timer reaches zero.

       ui.date_format <str> (default: "%b %e %H:%M")
              Date format to use in dialogs. See strftime(3).

       ui.language <language> (default: "System")
              Language of user interface. ’System’  means  that  the  language
              will be extracted from the environment dynamically.

       ui.show_status_bar [0|1] (default: 1)
              Show status bar on the screen.

       ui.show_title_bar [0|1] (default: 1)
              Show title bar on the screen.

       ui.startup_goto_dialog [0|1] (default: 1)
              Pop  up  goto  dialog  in  newly  created  tabs  when there’s no
              homepage set. This means also showing goto dialog on startup.

       ui.success_msgbox [0|1] (default: 1)
              When you pressed a [ Save ] button in some manager, this  option
              will  make  sure  that a box confirming success of the operation
              will pop up.

       ui.window_title [0|1] (default: 1)
              Set the window title when running in a windowing environment  in
              an  xterm-like  terminal. This way the document’s title is shown
              on the window titlebar.

DOCUMENT INFO

       Generated by help2doc (Revision: 1.15) on 02 May 05 using  output  from
       ELinks  version  0.10.4.CVS.  help2doc is distributed with ELinks under
       the terms of the GPL.

SEE ALSO

       elinks(1), elinkskeys(5)

                                   02 May 05                    ELINKS.CONF(5)