Provided by: wpasupplicant_0.4.8-3ubuntu1_i386 bug

NAME

       wpa_supplicant.conf - configuration file for wpa_supplicant

OVERVIEW

       wpa_supplicant  is configured using a text file that lists all accepted
       networks and security policies,  including  pre-shared  keys.  See  the
       example configuration file, probably in /usr/share/doc/wpa_supplicant/,
       for detailed information about the configuration format  and  supported
       fields.

       All  file  paths  in this configuration file should use full (absolute,
       not relative to working directory)  path  in  order  to  allow  working
       directory  to  be  changed. This can happen if wpa_supplicant is run in
       the background.

       Changes to configuration file can be reloaded be sending SIGHUP  signal
       to wpa_supplicant (’killall -HUP wpa_supplicant’). Similarly, reloading
       can be triggered with

       Configuration file can include one or more network  blocks,  e.g.,  one
       for  each  used SSID. wpa_supplicant will automatically select the best
       betwork based on the order of network blocks in the configuration file,
       network security level (WPA/WPA2 is prefered), and signal strength.

QUICK EXAMPLES

       1. WPA-Personal  (PSK)  as home network and WPA-Enterprise with EAP-TLS
          as work network.

          # allow frontend (e.g., wpa_cli) to be used by all users in ’wheel’ group
          ctrl_interface=/var/run/wpa_supplicant
          ctrl_interface_group=wheel
          #
          # home network; allow all valid ciphers
          network={
               ssid="home"
               scan_ssid=1
               key_mgmt=WPA-PSK
               psk="very secret passphrase"
          }
          #
          # work network; use EAP-TLS with WPA; allow only CCMP and TKIP ciphers
          network={
               ssid="work"
               scan_ssid=1
               key_mgmt=WPA-EAP
               pairwise=CCMP TKIP
               group=CCMP TKIP
               eap=TLS
               identity="user@example.com"
               ca_cert="/etc/cert/ca.pem"
               client_cert="/etc/cert/user.pem"
               private_key="/etc/cert/user.prv"
               private_key_passwd="password"
          }

       2. WPA-RADIUS/EAP-PEAP/MSCHAPv2  with  RADIUS  servers  that  use   old
          peaplabel (e.g., Funk Odyssey and SBR, Meetinghouse Aegis, Interlink
          RAD-Series)

          ctrl_interface=/var/run/wpa_supplicant
          ctrl_interface_group=wheel
          network={
               ssid="example"
               scan_ssid=1
               key_mgmt=WPA-EAP
               eap=PEAP
               identity="user@example.com"
               password="foobar"
               ca_cert="/etc/cert/ca.pem"
               phase1="peaplabel=0"
               phase2="auth=MSCHAPV2"
          }

       3. EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for
          the  unencrypted use. Real identity is sent only within an encrypted
          TLS tunnel.

          ctrl_interface=/var/run/wpa_supplicant
          ctrl_interface_group=wheel
          network={
               ssid="example"
               scan_ssid=1
               key_mgmt=WPA-EAP
               eap=TTLS
               identity="user@example.com"
               anonymous_identity="anonymous@example.com"
               password="foobar"
               ca_cert="/etc/cert/ca.pem"
               phase2="auth=MD5"
          }

       4. IEEE 802.1X (i.e., no WPA)  with  dynamic  WEP  keys  (require  both
          unicast and broadcast); use EAP-TLS for authentication

          ctrl_interface=/var/run/wpa_supplicant
          ctrl_interface_group=wheel
          network={
               ssid="1x-test"
               scan_ssid=1
               key_mgmt=IEEE8021X
               eap=TLS
               identity="user@example.com"
               ca_cert="/etc/cert/ca.pem"
               client_cert="/etc/cert/user.pem"
               private_key="/etc/cert/user.prv"
               private_key_passwd="password"
               eapol_flags=3
          }

       5. Catch  all example that allows more or less all configuration modes.
          The configuration options are used based on what security policy  is
          used  in  the  selected  SSID. This is mostly for testing and is not
          recommended for normal use.

          ctrl_interface=/var/run/wpa_supplicant
          ctrl_interface_group=wheel
          network={
               ssid="example"
               scan_ssid=1
               key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE
               pairwise=CCMP TKIP
               group=CCMP TKIP WEP104 WEP40
               psk="very secret passphrase"
               eap=TTLS PEAP TLS
               identity="user@example.com"
               password="foobar"
               ca_cert="/etc/cert/ca.pem"
               client_cert="/etc/cert/user.pem"
               private_key="/etc/cert/user.prv"
               private_key_passwd="password"
               phase1="peaplabel=0"
               ca_cert2="/etc/cert/ca2.pem"
               client_cert2="/etc/cer/user.pem"
               private_key2="/etc/cer/user.prv"
               private_key2_passwd="password"
          }

       6. Authentication for wired Ethernet. This can be used with

          ctrl_interface=/var/run/wpa_supplicant
          ctrl_interface_group=wheel
          ap_scan=0
          network={
               key_mgmt=IEEE8021X
               eap=MD5
               identity="user"
               password="password"
               eapol_flags=0
          }

CERTIFICATES

       Some EAP authentication methods require use  of  certificates.  EAP-TLS
       uses both server side and client certificates whereas EAP-PEAP and EAP-
       TTLS only require the server side certificate. When client  certificate
       is  used,  a  matching  private  key  file  has  to also be included in
       configuration. If the private key uses a passphrase,  this  has  to  be
       configured in wpa_supplicant.conf ("private_key_passwd").

       wpa_supplicant supports X.509 certificates in PEM and DER formats. User
       certificate and private key can be included in the same file.

       If the user certificate and private  key  is  received  in  PKCS#12/PFX
       format,  they  need  to  be  converted  to  suitable PEM/DER format for
       wpa_supplicant. This can be done, e.g., with following commands:

              # convert client certificate and private key to PEM format
              openssl pkcs12 -in example.pfx -out user.pem -clcerts
              # convert CA certificate (if included in PFX file) to PEM format
              openssl pkcs12 -in example.pfx -out ca.pem -cacerts -nokeys

SEE ALSO

       wpa_supplicant(8) openssl(1)

                               08 February 2006         WPA_SUPPLICANT.CONF(5)