Provided by: xterm_208-3.1ubuntu3_i386 bug

NAME

       xterm - terminal emulator for X

SYNOPSIS

       xterm [-toolkitoption ...] [-option ...] [shell]

DESCRIPTION

       The  xterm  program is a terminal emulator for the X Window System.  It
       provides  DEC  VT102/VT220  (VTxxx)  and  Tektronix   4014   compatible
       terminals  for programs that cannot use the window system directly.  If
       the underlying operating system supports terminal resizing capabilities
       (for  example,  the  SIGWINCH  signal  in systems derived from 4.3bsd),
       xterm will use the facilities to notify programs running in the  window
       whenever it is resized.

       The  VTxxx  and  Tektronix 4014 terminals each have their own window so
       that you can edit text in one and look at graphics in the other at  the
       same  time.   To  maintain  the  correct  aspect  ratio (height/width),
       Tektronix graphics will be restricted to the largest box with a  4014’s
       aspect  ratio  that will fit in the window.  This box is located in the
       upper left area of the window.

       Although both windows may be displayed at the same time, one of them is
       considered  the  ‘‘active’’  window  for  receiving  keyboard input and
       terminal output.  This is the window that  contains  the  text  cursor.
       The  active  window  can  be  chosen through escape sequences, the ‘‘VT
       Options’’ menu in the VTxxx window, and the ‘‘Tek Options’’ menu in the
       4014 window.

EMULATIONS

       The   VT102   emulation  is  fairly  complete,  but  does  not  support
       autorepeat.  Double-size characters are displayed properly if your font
       server  supports  scalable fonts.  The VT220 emulation does not support
       soft fonts, it is otherwise complete.   Termcap(5)  entries  that  work
       with  xterm  include  an  optional  platform-specific entry, ‘‘xterm,’’
       ‘‘vt102,’’ ‘‘vt100’’ and ‘‘ansi,’’ and ‘‘dumb.’’   xterm  automatically
       searches the termcap file in this order for these entries and then sets
       the ‘‘TERM’’ and the ‘‘TERMCAP’’ environment variables.  You  may  also
       use  ‘‘vt220,’’   but  must  set  the terminal emulation level with the
       decTerminalID resource.  (The ‘‘TERMCAP’’ environment variable  is  not
       set  if xterm is linked against a terminfo library, since the requisite
       information is not  provided  by  the  termcap  emulation  of  terminfo
       libraries).

       Many  of  the  special  xterm  features  may  be modified under program
       control through a set of escape sequences different from  the  standard
       VT102 escape sequences.  (See the Xterm Control Sequences document.)

       The  Tektronix  4014 emulation is also fairly good.  It supports 12-bit
       graphics addressing, scaled to the window size.   Four  different  font
       sizes and five different lines types are supported.  There is no write-
       through or defocused mode support.  The  Tektronix  text  and  graphics
       commands  are recorded internally by xterm and may be written to a file
       by sending the COPY escape sequence (or through the Tektronix menu; see
       below).   The  name  of  the  file will be ‘‘COPYyyyy-MM-dd.hh:mm:ss’’,
       where yyyy, MM, dd, hh, mm and ss  are  the  year,  month,  day,  hour,
       minute  and  second when the COPY was performed (the file is created in
       the directory xterm is started in, or the home directory  for  a  login
       xterm).

       Not  all  of  the  features  described  in  this manual are necessarily
       available  in  this  version  of  xterm.   Some  (e.g.,  the  non-VT220
       extensions)  are  available  only  if they were compiled in, though the
       most commonly-used are in the default configuration.

OTHER FEATURES

       Xterm automatically highlights the text cursor when the pointer  enters
       the  window  (selected) and unhighlights it when the pointer leaves the
       window (unselected).  If the window is the focus window, then the  text
       cursor is highlighted no matter where the pointer is.

       In VT102 mode, there are escape sequences to activate and deactivate an
       alternate screen buffer, which is the same size as the display area  of
       the  window.   When activated, the current screen is saved and replaced
       with the alternate screen.  Saving of lines scrolled off the top of the
       window is disabled until the normal screen is restored.  The termcap(5)
       entry for xterm allows  the  visual  editor  vi(1)  to  switch  to  the
       alternate  screen  for  editing  and  to restore the screen on exit.  A
       popup menu entry makes it simple  to  switch  between  the  normal  and
       alternate screens for cut and paste.

       In either VT102 or Tektronix mode, there are escape sequences to change
       the name of the windows.  Additionally, in VT102 mode, xterm implements
       the window-manipulation control sequences from dtterm, such as resizing
       the window, setting its location on the screen.

       Xterm allows  character-based  applications  to  receive  mouse  events
       (currently  button-press  and release events, and button-motion events)
       as  keyboard  control  sequences.   See  Xterm  Control  Sequences  for
       details.

OPTIONS

       The xterm terminal emulator accepts the standard X Toolkit command line
       options as well as many application-specific options.   If  the  option
       begins  with  a  ‘+’  instead  of  a ‘-’, the option is restored to its
       default value.  The -version and -help options are interpreted even  if
       xterm  cannot  open  the  display,  and  are  useful  for  testing  and
       configuration scripts:

       -version
               This causes xterm to print a version  number  to  the  standard
               output.

       -help   This causes xterm to print out a verbose message describing its
               options, one per line.  The message is written to the  standard
               output.   Xterm  generates  this message, sorting it and noting
               whether a "-option" or a "+option" turns the feature on or off,
               since  some  features  historically have been one or the other.
               Xterm generates a concise help message  (multiple  options  per
               line) when an unknown option is used, e.g.,
                    xterm -z

               If  the  logic  for  a particular option such as logging is not
               compiled into xterm, the help text for that option also is  not
               displayed by the -help option.

       One parameter (after all options) may be given.  That overrides xterm’s
       built-in choice of shell program.   Normally  xterm  checks  the  SHELL
       variable.   If  that  is  not set, xterm tries to use the shell program
       specified in the password  file.   If  that  is  not  set,  xterm  uses
       /bin/sh.   If  the  parameter names an executable file, xterm uses that
       instead.  The parameter must be an absolute path, or name a file  found
       on  the  user’s  PATH (and thereby construct an absolute path).  The -e
       option cannot be used with this parameter since it uses all  parameters
       following the option.

       The other options are used to control the appearance and behavior.  Not
       all options are necessarily configured into your copy of xterm:

       -132    Normally, the  VT102  DECCOLM  escape  sequence  that  switches
               between  80 and 132 column mode is ignored.  This option causes
               the DECCOLM escape sequence to be  recognized,  and  the  xterm
               window will resize appropriately.

       -ah     This  option  indicates  that xterm should always highlight the
               text cursor.  By default, xterm  will  display  a  hollow  text
               cursor  whenever  the  focus  is lost or the pointer leaves the
               window.

       +ah     This  option  indicates  that  xterm  should  do  text   cursor
               highlighting based on focus.

       -ai     This  option  disables  active icon support if that feature was
               compiled into xterm.  This is equivalent to setting  the  vt100
               resource activeIcon to ‘‘false’’.

       +ai     This  option  enables  active  icon support if that feature was
               compiled into xterm.  This is equivalent to setting  the  vt100
               resource activeIcon to ‘‘true’’.

       -aw     This  option  indicates that auto-wraparound should be allowed.
               This allows the cursor to automatically wrap to  the  beginning
               of the next line when when it is at the rightmost position of a
               line and text is output.

       +aw     This  option  indicates  that  auto-wraparound  should  not  be
               allowed.

       -b number
               This  option  specifies  the  size  of  the  inner  border (the
               distance between the outer  edge  of  the  characters  and  the
               window  border)  in  pixels.   That is the vt100 internalBorder
               resource.  The default is 2.

       +bc     turn off text cursor blinking.  This overrides the  cursorBlink
               resource.

       -bc     turn  on  text cursor blinking.  This overrides the cursorBlink
               resource.

       -bcf milliseconds
               set the amount of time text cursor is off when blinking via the
               cursorOffTime resource.

       -bcn milliseconds
               set  the amount of time text cursor is on when blinking via the
               cursorOffTime resource.

       -bdc    Set the vt100 resource colorBDMode to ‘‘false’’, disabling  the
               display of characters with bold attribute as color

       +bdc    Set  the  vt100  resource colorBDMode to ‘‘true’’, enabling the
               display of characters with bold attribute as color rather  than
               bold

       -cb     Set the vt100 resource cutToBeginningOfLine to ‘‘false’’.

       +cb     Set the vt100 resource cutToBeginningOfLine to ‘‘true’’.

       -cc characterclassrange:value[,...]
               This  sets  classes  indicated by the given ranges for using in
               selecting by  words.   See  the  section  specifying  character
               classes.  and discussion of the charClass resource.

       -cjk_width
               Set  the  cjkWidth  resource  to  ‘‘true’’.   When  turned  on,
               characters with East Asian Ambiguous (A)  category  in  UTR  11
               have  a column width of 2.  Otherwise, they have a column width
               of 1.  This may be useful for some legacy  CJK  text  terminal-
               based  programs  assuming  box  drawings  and  others to have a
               column width of 2.  It also  has  to  be  turned  on  when  you
               specify  a  TrueType CJK double-width (bi-width/monospace) font
               either with -fa at the command line or faceName resource.   The
               default is ‘‘false’’

       +cjk_width
               Reset the cjkWidth resource.

       -class string
               This  option  allows  you  to  override xterm’s resource class.
               Normally it is ‘‘XTerm’’, but can be set to another class  such
               as ‘‘UXTerm’’ to override selected resources.

       -cm     This  option  disables  recognition of ANSI color-change escape
               sequences.  It sets the colorMode resource to ‘‘false’’.

       +cm     This option enables recognition  of  ANSI  color-change  escape
               sequences.  This is the same as the vt100 resource colorMode.

       -cn     This  option indicates that newlines should not be cut in line-
               mode selections.  It sets the cutNewline resource to ‘‘false’’.

       +cn     This  option indicates that newlines should be cut in line-mode
               selections.  It sets the cutNewline resource to ‘‘true’’.

       -cr color
               This option specifies the color to use for  text  cursor.   The
               default  is  to  use the same foreground color that is used for
               text.  It  sets  the  cursorColor  resource  according  to  the
               parameter.

       -cu     This  option  indicates  that xterm should work around a bug in
               the more(1) program that causes it to incorrectly display lines
               that  are exactly the width of the window and are followed by a
               line beginning with a tab (the leading tabs are not displayed).
               This option is so named because it was originally thought to be
               a bug in the curses(3x) cursor motion package.

       +cu     This option indicates that xterm should  not  work  around  the
               more(1) bug mentioned above.

       -dc     This  option  disables  the  escape  sequence to change dynamic
               colors: the vt100 foreground and background  colors,  its  text
               cursor  color,  the  pointer  cursor  foreground and background
               colors,  the  Tektronix  emulator  foreground  and   background
               colors,  its text cursor color and highlight color.  The option
               sets the dynamicColors option to ‘‘false’’.

       +dc     This option enables  the  escape  sequence  to  change  dynamic
               colors.   The option sets the dynamicColors option to ‘‘true’’.

       -e program [ arguments ... ]
               This  option  specifies  the  program  (and  its  command  line
               arguments)  to  be  run  in the xterm window.  It also sets the
               window title and icon name to be the basename  of  the  program
               being  executed  if  neither -T nor -n are given on the command
               line.  This must be the last option on the command line.

       -en encoding
               This option determines the encoding on which  xterm  runs.   It
               sets  the  locale  resource.   Encodings  other  than UTF-8 are
               supported by using luit.  The -lc option should be used instead
               of -en for systems with locale support.

       -fb font
               This  option  specifies  a font to be used when displaying bold
               text.  This font must be the  same  height  and  width  as  the
               normal  font.   If  only  one  of  the  normal or bold fonts is
               specified, it will be used as the normal font and the bold font
               will  be produced by overstriking this font.  The default is to
               do overstriking of the normal font.  See also the discussion of
               boldFont and boldMode resources.

       -fa pattern
               This  option  sets  the  pattern  for  fonts  selected from the
               FreeType library if support for that library was compiled  into
               xterm.   This corresponds to the faceName resource.  When a CJK
               double-width font is specified, you also need to  turn  on  the
               cjkWidth resource.

       -fbb    This option indicates that xterm should compare normal and bold
               fonts bounding boxes to ensure they are  compatible.   It  sets
               the freeBoldBox resource to ‘‘false’’.

       +fbb    This  option indicates that xterm should not compare normal and
               bold fonts bounding boxes to ensure they  are  compatible.   It
               sets the freeBoldBox resource to ‘‘true’’.

       -fbx    This  option  indicates  that  xterm should not assume that the
               normal and bold fonts have VT100 line-drawing  characters.   If
               any  are  missing, xterm will draw the characters directly.  It
               sets the forceBoxChars resource to ‘‘false’’.

       +fbx    This option indicates that xterm should assume that the  normal
               and bold fonts have VT100 line-drawing characters.  It sets the
               forceBoxChars resource to ‘‘true’’.

       -fd pattern
               This option sets the pattern for  double-width  fonts  selected
               from  the  FreeType  library  if  support  for that library was
               compiled    into    xterm.     This    corresponds    to    the
               faceNameDoublesize resource.

       -fi font
               This  option sets the font for active icons if that feature was
               compiled into xterm.  See also the discussion of  the  iconFont
               resource.

       -fs size
               This  option  sets  the  pointsize  for fonts selected from the
               FreeType library if support for that library was compiled  into
               xterm.  This corresponds to the faceSize resource.

       -fw font
               This  option  specifies the font to be used for displaying wide
               text.  By default, it will attempt to use a font twice as  wide
               as  the  font  that  will  be  used to draw normal text.  If no
               doublewidth font is found, it will improvise, by stretching the
               normal font.  This corresponds to the wideFont resource.

       -fwb font
               This  option  specifies the font to be used for displaying bold
               wide text.  By default, it will attempt to use a font twice  as
               wide  as  the  font that will be used to draw bold text.  If no
               doublewidth font is found, it will improvise, by stretching the
               bold font.  This corresponds to the wideBoldFont resource.

       -fx font
               This  option  specifies  the font to be used for displaying the
               preedit string in the "OverTheSpot" input method.  See also the
               discussion of the ximFont resource.

       -hc color
               This  option  specifies  the color to use for the background of
               selected or otherwise  highlighted  text.   If  not  specified,
               reverse   video   is   used.    See   the   discussion  of  the
               highlightColor resource.

       -hf     This option indicates that HP Function Key escape codes  should
               be  generated  for  function  keys.  It sets the hpFunctionKeys
               resource to ‘‘true’’.

       +hf     This option indicates that HP Function Key escape codes  should
               not be generated for function keys.  It sets the hpFunctionKeys
               resource to ‘‘false’’.

       -hold   Turn on the hold resource, i.e.,  xterm  will  not  immediately
               destroy  its  window when the shell command completes.  It will
               wait until you use  the  window  manager  to  destroy/kill  the
               window,  or  if  you  use  the menu entries that send a signal,
               e.g., HUP or KILL.

       +hold   Turn off  the  hold  resource,  i.e.,  xterm  will  immediately
               destroy its window when the shell command completes.

       -ie     Turn  on  the  ptyInitialErase  resource, i.e., use the pseudo-
               terminal’s sense of the stty erase value.

       +ie     Turn off the ptyInitialErase resource, i.e., set the stty erase
               value  using  the  kb  string  from  the  termcap  entry  as  a
               reference, if available.

       -im     Turn on the useInsertMode resource, which forces use of  insert
               mode  by  adding appropriate entries to the TERMCAP environment
               variable.

       +im     Turn off the useInsertMode resource.

       -into windowId
               Given an X window identifier (a decimal  integer),  xterm  will
               reparent  its  top-level  shell widget to that window.  This is
               used to embed xterm within other applications.

       -j      This option indicates that xterm should do jump scrolling.   It
               corresponds  to  the  jumpScroll  resource.   Normally, text is
               scrolled one line at a time; this option allows xterm  to  move
               multiple  lines  at  a  time  so  that  it does not fall as far
               behind.  Its use is strongly recommended since it  makes  xterm
               much  faster  when scanning through large amounts of text.  The
               VT100 escape sequences for enabling and disabling smooth scroll
               as  well  as  the  ‘‘VT Options’’ menu can be used to turn this
               feature on or off.

       +j      This option indicates that xterm should not do jump  scrolling.

       -k8     This   option   sets   the   allowC1Printable  resource.   When
               allowC1Printable is set, xterm  overrides  the  mapping  of  C1
               control characters (code 128-159) to treat them as printable.

       +k8     This option resets the allowC1Printable resource.

       -kt keyboardtype
               This  option  sets  the keyboardType resource.  Possible values
               include: ‘‘hp’’, ‘‘sco’’, ‘‘sun’’ and ‘‘vt220’’.   The  default
               value  ‘‘unknown’’,  causes  the  corresponding  resource to be
               ignored.

       -l      Turn logging on.  Normally logging is  not  supported,  due  to
               security  concerns.   Some  versions  of xterm may have logging
               enabled.  The logfile is written to the  directory  from  which
               xterm is invoked.  The filename is generated, of the form

                    XtermLog.XXXXXX

               or

                    Xterm.log.hostname.yyyy.mm.dd.hh.mm.ss.XXXXXX

               depending on how xterm was built.

       +l      Turn logging off.

       -lc     Turn  on  support  of various encodings according to the users’
               locale setting, i.e., LC_ALL,  LC_CTYPE,  or  LANG  environment
               variables.   This  is  achieved by turning on UTF-8 mode and by
               invoking luit  for  conversion  between  locale  encodings  and
               UTF-8.    (luit   is  not  invoked  in  UTF-8  locales.)   This
               corresponds to the locale resource.

               The actual list of encodings which are supported is  determined
               by  luit.   Consult  the  luit manual page for further details.
               See also the discussion of the -u8 option which supports  UTF-8
               locales.

       +lc     Turn  off  support  of automatic selection of locale encodings.
               Conventional 8bit mode or, in UTF-8 locales or with -u8 option,
               UTF-8 mode will be used.

       -lcc path
               File  name  for the encoding converter from/to locale encodings
               and UTF-8 which is used with -lc  option  or  locale  resource.
               This corresponds to the localeFilter resource.

       -leftbar
               Force  scrollbar to the left side of VT100 screen.  This is the
               default, unless you have set the rightScrollBar resource.

       -lf filename
               Specify the log-filename.  See the -l option.

       -ls     This option indicates that the shell that  is  started  in  the
               xterm  window  will be a login shell (i.e., the first character
               of argv[0] will be a dash, indicating  to  the  shell  that  it
               should read the user’s .login or .profile).

               The  -ls  flag and the loginShell resource are ignored if -e is
               also given, because xterm does not know how to make  the  shell
               start  the  given  command  after whatever it does when it is a
               login shell - the user’s shell of choice need not be  a  Bourne
               shell  after  all.   Also,  xterm -e  is  supposed to provide a
               consistent functionality for other applications  that  need  to
               start  text-mode  programs  in a window, and if loginShell were
               not ignored, the result  of  ~/.profile  might  interfere  with
               that.

               If you do want the effect of -ls and -e simultaneously, you may
               get away with something like
                      xterm -e /bin/bash -l -c "my command here"

               Finally, -ls is not completely  ignored,  because  xterm -ls -e
               does  write a /etc/wtmp entry (if configured to do so), whereas
               xterm -e does not.

       +ls     This option indicates that the shell that is started should not
               be a login shell (i.e., it will be a normal ‘‘subshell’’).

       -mb     This option indicates that xterm should ring a margin bell when
               the user types near the right end of a line.  This  option  can
               be turned on and off from the ‘‘VT Options’’ menu.

       +mb     This option indicates that margin bell should not be rung.

       -mc milliseconds
               This  option  specifies  the  maximum  time between multi-click
               selections.

       -mesg   Turn off the messages resource, i.e., disallow write access  to
               the terminal.

       +mesg   Turn  on the messages resource, i.e., allow write access to the
               terminal.

       -mk_width
               Set the mkWidth resource to ‘‘true’’.  This makes xterm  use  a
               built-in  version of the wide-character width calculation.  The
               default is ‘‘false’’

       +mk_width
               Reset the mkWidth resource.

       -ms color
               This option specifies the color to  be  used  for  the  pointer
               cursor.  The default is to use the foreground color.  This sets
               the pointerColor resource.

       -nb number
               This option specifies the number of characters from  the  right
               end  of a line at which the margin bell, if enabled, will ring.
               The default is 10.

       -nul    This option disables the display of underlining.

       +nul    This option enables the display of underlining.

       -pc     This option enables  the  PC-style  use  of  bold  colors  (see
               boldColors resource).

       +pc     This option disables the PC-style use of bold colors.

       -pob    This option indicates that the window should be raised whenever
               a Control-G is received.

       +pob    This option indicates that the  window  should  not  be  raised
               whenever a Control-G is received.

       -rightbar
               Force scrollbar to the right side of VT100 screen.

       -rvc    This  option  disables  the  display of characters with reverse
               attribute as color.

       +rvc    This option enables the  display  of  characters  with  reverse
               attribute as color.

       -rw     This   option   indicates  that  reverse-wraparound  should  be
               allowed.  This allows the cursor to back up from  the  leftmost
               column  of  one  line  to  the rightmost column of the previous
               line.  This is very useful for editing long shell command lines
               and  is  encouraged.  This option can be turned on and off from
               the ‘‘VT Options’’ menu.

       +rw     This option indicates that  reverse-wraparound  should  not  be
               allowed.

       -s      This  option  indicates  that  xterm may scroll asynchronously,
               meaning that the screen does not have to be kept completely  up
               to  date while scrolling.  This allows xterm to run faster when
               network latencies are very high and is  typically  useful  when
               running across a very large internet or many gateways.

       +s      This option indicates that xterm should scroll synchronously.

       -samename
               Does  not  send  title  and  icon name change requests when the
               request would have no effect: the name is  not  changed.   This
               has the advantage of preventing flicker and the disadvantage of
               requiring an extra round trip to the server  to  find  out  the
               previous value.  In practice this should never be a problem.

       +samename
               Always send title and icon name change requests.

       -sb     This  option  indicates  that  some  number  of  lines that are
               scrolled off the top of the window should be saved and  that  a
               scrollbar  should  be  displayed  so  that  those  lines can be
               viewed.  This option may be turned on and  off  from  the  ‘‘VT
               Options’’ menu.

       +sb     This option indicates that a scrollbar should not be displayed.

       -sf     This option indicates that Sun Function Key escape codes should
               be generated for function keys.

       +sf     This  option indicates that the standard escape codes should be
               generated for function keys.

       -si     This option indicates  that  output  to  a  window  should  not
               automatically  reposition  the  screen  to  the  bottom  of the
               scrolling region.  This option can be turned on  and  off  from
               the ‘‘VT Options’’ menu.

       +si     This  option  indicates that output to a window should cause it
               to scroll to the bottom.

       -sk     This option indicates that  pressing  a  key  while  using  the
               scrollbar  to  review  previous  lines of text should cause the
               window to be repositioned automatically in the normal  position
               at the bottom of the scroll region.

       +sk     This  option  indicates  that  pressing  a  key while using the
               scrollbar should not cause the window to be repositioned.

       -sl number
               This option specifies the number of lines  to  save  that  have
               been  scrolled  off the top of the screen.  This corresponds to
               the saveLines resource.  The default is 64.

       -sm     This  option,  corresponding  to   the   sessionMgt   resource,
               indicates that xterm should set up session manager callbacks.

       +sm     This  option  indicates  that  xterm  should not set up session
               manager callbacks.

       -sp     This option indicates that Sun/PC keyboard should  be  assumed,
               providing  mapping  for  keypad ‘+’ to ‘,’, and CTRL-F1 to F13,
               CTRL-F2 to F14, etc.

       +sp     This option indicates that the standard escape codes should  be
               generated for keypad and function keys.

       -t      This  option  indicates  that  xterm  should start in Tektronix
               mode, rather than in VT102 mode.   Switching  between  the  two
               windows  is  done  using  the  ‘‘Options’’  menus.   Termcap(5)
               entries  that  work  with   xterm   ‘‘tek4014,’’   ‘‘tek4015,’’
               ‘‘tek4012’’,  ‘‘tek4013’’ and ‘‘tek4010,’’ and ‘‘dumb.’’  xterm
               automatically searches the termcap file in this order for these
               entries   and  then  sets  the  ‘‘TERM’’  and  the  ‘‘TERMCAP’’
               environment variables.

       +t      This option indicates that xterm should start in VT102 mode.

       -tb     This option, corresponding to the toolBar  resource,  indicates
               that  xterm should display a toolbar (or menubar) at the top of
               its window.  The buttons in the toolbar correspond to the popup
               menus, e.g., control/left/mouse for "Main Options".

       +tb     This option indicates that xterm should not set up a toolbar.

       -ti term_id
               Specify  the  name used by xterm to select the correct response
               to terminal ID queries.  It also specifies the emulation level,
               used  to  determine  the  type  of  response  to  a  DA control
               sequence.  Valid values include vt52, vt100, vt101, vt102,  and
               vt220  (the  "vt"  is  optional).   The  default is vt100.  The
               term_id argument specifies the terminal ID to  use.   (This  is
               the same as the decTerminalID resource).

       -tm string
               This  option  specifies  a  series of terminal setting keywords
               followed by the  characters  that  should  be  bound  to  those
               functions, similar to the stty program.  The keywords and their
               values are described in detail in the ttyModes resource.

       -tn name
               This option specifies the name of the terminal type to  be  set
               in  the  TERM  environment  variable.   It  corresponds  to the
               termName resource.   This  terminal  type  must  exist  in  the
               terminal  database (termcap or terminfo, depending on how xterm
               is built) and should have li# and co# entries.  If the terminal
               type  is  not  found,  xterm  uses the built-in list ‘‘xterm’’,
               ‘‘vt102’’, etc.

       -u8     This option sets the utf8 resource.  When utf8  is  set,  xterm
               interprets  incoming  data  as  UTF-8.  This sets the wideChars
               resource as a side-effect, but  the  UTF-8  mode  set  by  this
               option  prevents it from being turned off.  If you must turn it
               on and off, use the wideChars resource.

               This option and the utf8 resource are overridden by the -lc and
               -en  options  and  locale resource.  That is, if xterm has been
               compiled to support  luit,  and  the  locale  resource  is  not
               ‘‘false’’  this  option is ignored.  We recommend using the -lc
               option or the ‘‘locale: true’’ resource in UTF-8  locales  when
               your  operating  system supports locale, or -en UTF-8 option or
               the ‘‘locale: UTF-8’’ resource when your operating system  does
               not support locale.

       +u8     This option resets the utf8 resource.

       -ulc    This  option  disables the display of characters with underline
               attribute as color rather than with underlining.

       +ulc    This option enables the display of  characters  with  underline
               attribute as color rather than with underlining.

       -ut     This option indicates that xterm should not write a record into
               the the system utmp log file.

       +ut     This option indicates that xterm should write a record into the
               system utmp log file.

       -vb     This  option  indicates that a visual bell is preferred over an
               audible one.  Instead of ringing the terminal bell  whenever  a
               Control-G is received, the window will be flashed.

       +vb     This option indicates that a visual bell should not be used.

       -wc     This  option  sets  the  wideChars resource.  When wideChars is
               set, xterm maintains internal structures for 16-bit characters.
               If  you do not set this resource to ‘‘true’’, xterm will ignore
               the escape sequence which turns UTF-8 mode  on  and  off.   The
               default is ‘‘false’’.

       +wc     This option resets the wideChars resource.

       -wf     This  option indicates that xterm should wait for the window to
               be mapped the first time before starting the subprocess so that
               the  initial  terminal  size settings and environment variables
               are correct.  It is the application’s responsibility  to  catch
               subsequent terminal size changes.

       +wf     This  option  indicates  that  xterm  should  not  wait  before
               starting the subprocess.

       -ziconbeep percent
               Same as zIconBeep resource.  If  percent  is  non-zero,  xterms
               that  produce  output while iconified will cause an XBell sound
               at the given volume and have  "***"  prepended  to  their  icon
               titles.    Most   window   managers  will  detect  this  change
               immediately, showing you  which  window  has  the  output.   (A
               similar feature was in x10 xterm.)

       -C      This  option  indicates that this window should receive console
               output.  This is not  supported  on  all  systems.   To  obtain
               console  output,  you  must be the owner of the console device,
               and you must have read and write permission for it.  If you are
               running  X under xdm on the console screen you may need to have
               the session startup and reset programs  explicitly  change  the
               ownership  of the console device in order to get this option to
               work.

       -Sccn   This option allows xterm to be used  as  an  input  and  output
               channel  for  an  existing  program  and  is  sometimes used in
               specialized applications.  The option value specifies the  last
               few  letters  of  the name of a pseudo-terminal to use in slave
               mode, plus the number of the inherited file descriptor.  If the
               option contains a ‘‘/’’ character, that delimits the characters
               used for the pseudo-terminal name  from  the  file  descriptor.
               Otherwise,  exactly two characters are used from the option for
               the pseudo-terminal name, the remainder is the file descriptor.
               Examples:
                      -S123/45
                      -Sab34

               Note that xterm does not close any file descriptor which it did
               not open for its own use.  It is possible (though probably  not
               portable)  to  have  an  application  which passes an open file
               descriptor down to xterm past  the  initialization  or  the  -S
               option to a process running in the xterm.

       The  following  command  line  arguments are provided for compatibility
       with older versions.  They may not be supported in the next release  as
       the  X Toolkit provides standard options that accomplish the same task.

       %geom   This option specifies the preferred size and  position  of  the
               Tektronix   window.    It   is  shorthand  for  specifying  the
               ‘‘*tekGeometry’’ resource.

        #geom  This option  specifies  the  preferred  position  of  the  icon
               window.   It  is shorthand for specifying the ‘‘*iconGeometry’’
               resource.

       -T string
               This option specifies the title for  xterm’s  windows.   It  is
               equivalent to -title.

       -n string
               This option specifies the icon name for xterm’s windows.  It is
               shorthand for specifying the ‘‘*iconName’’ resource.  Note that
               this  is  not the same as the toolkit option -name (see below).
               The default icon name is the application name.

       -r      This option indicates that reverse video should be simulated by
               swapping   the   foreground   and  background  colors.   It  is
               equivalent to -rv.

       -w number
               This option  specifies  the  width  in  pixels  of  the  border
               surrounding  the  window.   It is equivalent to -borderwidth or
               -bw.

       The following standard X Toolkit command line  arguments  are  commonly
       used with xterm:

       -bd color
               This  option  specifies  the color to use for the border of the
               window.  The default is ‘‘black.’’

       -bg color
               This option specifies the color to use for  the  background  of
               the window.  The default is ‘‘white.’’

       -bw number
               This  option  specifies  the  width  in  pixels  of  the border
               surrounding the window.

       -display display
               This option specifies the X server to contact; see X(1).

       -fg color
               This option specifies the color to  use  for  displaying  text.
               The default is ‘‘black.’’

       -fn font
               This option specifies the font to be used for displaying normal
               text.  The default is fixed.

       -font font
               This is the same as -fn.

       -geometry geometry
               This option specifies the preferred size and  position  of  the
               VT102 window; see X(1).

       -iconic This  option indicates that xterm should ask the window manager
               to start it as an icon rather than as the normal window.

       -name name
               This  option  specifies  the  application  name   under   which
               resources   are   to  be  obtained,  rather  than  the  default
               executable file name.  Name should not contain ‘‘.’’  or  ‘‘*’’
               characters.

       -rv     This option indicates that reverse video should be simulated by
               swapping the foreground and background colors.

       +rv     Disable the simulation of reverse video by swapping  foreground
               and background colors.

       -title string
               This  option  specifies  the  window title string, which may be
               displayed by window managers  if  the  user  so  chooses.   The
               default  title  is  the  command  line  specified  after the -e
               option, if any, otherwise the application name.

       -xrm resourcestring
               This option specifies a resource string to be  used.   This  is
               especially  useful  for  setting  resources  that  do  not have
               separate command line options.

RESOURCES

       The program understands all of the core X Toolkit  resource  names  and
       classes.  Application specific resources (e.g., "XTerm.NAME") follow:

       backarrowKeyIsErase (class BackarrowKeyIsErase)
               Tie   the  VTxxx  backarrowKey  and  ptyInitialErase  resources
               together by setting the DECBKM state according to  whether  the
               initial  value of stty erase is a backspace (8) or delete (127)
               character.  The  default  is  ‘‘false’’,  which  disables  this
               feature.

       hold (class Hold)
               If true, xterm will not immediately destroy its window when the
               shell command completes.  It will wait until you use the window
               manager  to  destroy/kill  the  window,  or if you use the menu
               entries that send a signal, e.g., HUP or KILL.  You may  scroll
               back,  select text, etc., to perform most graphical operations.
               Resizing the  display  will  lose  data,  however,  since  this
               involves interaction with the shell which is no longer running.

       hpFunctionKeys (class HpFunctionKeys)
               Specifies whether or not HP Function Key escape codes should be
               generated   for   function  keys  instead  of  standard  escape
               sequences.  See also the keyboardType resource.

       iconGeometry (class IconGeometry)
               Specifies the preferred size and position  of  the  application
               when  iconified.   It  is  not necessarily obeyed by all window
               managers.

       iconName (class IconName)
               Specifies the icon name.  The default is the application  name.

       keyboardType (class KeyboardType)
               Enables  one  (or none) of the various keyboard-type resources:
               hpFunctionKeys,    scoFunctionKeys,     sunFunctionKeys     and
               sunKeyboard.   The  resource’s  value  should  be  one  of  the
               corresponding strings hp, sco, sun or  vt220.   The  individual
               resources  are  provided  for  legacy support; this resource is
               simpler to use.

       maxBufSize (class MaxBufSize)
               Specify the maximum size of the input buffer.  The  default  is
               32768.  You cannot set this to a value less than the minBufSize
               resource.  It will be increased as needed to  make  that  value
               evenly divide this one.

               On  some  systems  you  may want to increase one or both of the
               maxBufSize and minBufSize resource  values  to  achieve  better
               performance  if  the  operating  system  prefers  larger buffer
               sizes.

       messages (class Messages)
               Specifies whether write  access  to  the  terminal  is  allowed
               initially.  See mesg(1).  The default is ‘‘true’’.

       minBufSize (class MinBufSize)
               Specify  the minimum size of the input buffer, i.e., the amount
               of data that xterm requests on each read.  The default is 4096.
               You cannot set this to a value less than 64.

       ptyHandshake (class PtyHandshake)
               If    ‘‘true’’,   xterm   will   perform   handshaking   during
               initialization to ensure that the parent  and  child  processes
               update  the  utmp and stty state.  Platforms with newer pseudo-
               terminal interfaces do not require this feature; normally it is
               not configured.  The default is ‘‘true’’.

       ptyInitialErase (class PtyInitialErase)
               If  ‘‘true’’, xterm will use the pseudo-terminal’s sense of the
               stty erase value.  If ‘‘false’’, xterm will set the stty  erase
               value  to match its own configuration, using the kb string from
               the termcap entry as a  reference,  if  available.   In  either
               case, the result is applied to the TERMCAP variable which xterm
               sets.  The default is ‘‘false’’.

       sameName (class SameName)
               If the value of this resource is ‘‘true’’, xterm does not  send
               title and icon name change requests when the request would have
               no effect: the name is not changed.  This has the advantage  of
               preventing  flicker  and the disadvantage of requiring an extra
               round trip to the server to find out the  previous  value.   In
               practice  this  should  never  be  a  problem.   The default is
               ‘‘true’’.

       scoFunctionKeys (class ScoFunctionKeys)
               Specifies whether or not SCP Function Key escape  codes  should
               be  generated  for  function  keys  instead  of standard escape
               sequences.  See also the keyboardType resource.

       sessionMgt (class SessionMgt)
               If the value of  this  resource  is  ‘‘true’’,  xterm  sets  up
               session    manager    callbacks    for    XtNdieCallback    and
               XtNsaveCallback.  The default is ‘‘true’’.

       sunFunctionKeys (class SunFunctionKeys)
               Specifies whether or not Sun Function Key escape  codes  should
               be  generated  for  function  keys  instead  of standard escape
               sequences.  See also the keyboardType resource.

       sunKeyboard (class SunKeyboard)
               Specifies whether or  not  Sun/PC  keyboard  layout  should  be
               assumed  rather  than DEC VT220.  This causes the keypad ‘+’ to
               be mapped to ‘,’.  and CTRL F1-F12 to F11-F20, depending on the
               setting  of  the  ctrlFKeys  resource.  so xterm emulates a DEC
               VT220  more   accurately.    Otherwise   (the   default,   with
               sunKeyboard set to ‘‘false’’), xterm uses PC-style bindings for
               the function keys and keypad.

               PC-style bindings use the Shift, Alt, Control and Meta keys  as
               modifiers  for function-keys and keypad (see the document Xterm
               Control Sequences for  details).   The  PC-style  bindings  are
               analogous  to  PCTerm,  but not the same thing.  Normally these
               bindings do not conflict with  the  use  of  the  Meta  key  as
               described  for  the  eightBitInput  resource.  If they do, note
               that the PC-style bindings are evaluated first.  See  also  the
               keyboardType resource.

       termName (class TermName)
               Specifies  the  terminal  type  name  to  be  set  in  the TERM
               environment variable.

       title (class Title)
               Specifies a string that may be used by the window manager  when
               displaying this application.

       toolBar (class ToolBar)
               Specifies  whether or not the toolbar should be displayed.  The
               default is ‘‘true.’’

       ttyModes (class TtyModes)
               Specifies a string containing terminal setting keywords and the
               characters  to  which  they  may  be bound.  Allowable keywords
               include: brk, dsusp, eof,  eol,  eol2,  erase,  erase2,  flush,
               intr,  kill,  lnext,  quit,  rprnt,  start, status, stop, susp,
               swtch and weras.  Control characters may be specified as  ^char
               (e.g.,  ^c  or ^u) and ^? may be used to indicate delete (127).
               Use ^- to denote undef.  Use \034  to  represent  ^\,  since  a
               literal  backslash in an X resource escapes the next character.

               This  is  very  useful  for  overriding  the  default  terminal
               settings  without  having  to do an stty every time an xterm is
               started.  Note, however, that the stty program on a given  host
               may use different keywords; xterm’s table is built-in.

       useInsertMode (class UseInsertMode)
               Force  use  of insert mode by adding appropriate entries to the
               TERMCAP environment variable.  This is  useful  if  the  system
               termcap is broken.  The default is ‘‘false.’’

       utmpDisplayId (class UtmpDisplayId)
               Specifies whether or not xterm should try to record the display
               identifier (display number and screen number) as  well  as  the
               hostname in the system utmp log file.  The default is ‘‘true.’’

       utmpInhibit (class UtmpInhibit)
               Specifies whether or not xterm should try to record the  user’s
               terminal  in the system utmp log file.  If true, xterm will not
               try.  The default is ‘‘false.’’

       waitForMap (class WaitForMap)
               Specifies whether or not xterm  should  wait  for  the  initial
               window  map  before  starting  the  subprocess.  The default is
               ‘‘false.’’

       zIconBeep (class ZIconBeep)
               Same as -ziconbeep command line argument.  If the value of this
               resource   is   non-zero,  xterms  that  produce  output  while
               iconified will cause an XBell sound at  the  given  volume  and
               have  "***"  prepended  to  their  icon  titles.   Most  window
               managers will detect this change immediately, showing you which
               window  has  the output.  (A similar feature was in x10 xterm.)
               The default is ‘‘false.’’

       The following resources are specified  as  part  of  the  vt100  widget
       (class    VT100):   These   are   specified   by   patterns   such   as
       "XTerm.vt100.NAME":

       activeIcon (class ActiveIcon)
               Specifies whether or not active icon windows  are  to  be  used
               when the xterm window is iconified, if this feature is compiled
               into xterm.  The active icon is a miniature  representation  of
               the  content  of  the  window  and  will  update as the content
               changes.   Not  all   window   managers   necessarily   support
               application  icon windows.  Some window managers will allow you
               to enter keystrokes into the active icon window.   The  default
               is ‘‘false.’’

       allowC1Printable (class AllowC1Printable)
               If  true,  overrides the mapping of C1 controls (codes 128-159)
               to make them be treated as if they were  printable  characters.
               Although this corresponds to no particular standard, some users
               insist it is a VT100.  The default is ‘‘false.’’

       allowSendEvents (class AllowSendEvents)
               Specifies whether  or  not  synthetic  key  and  button  events
               (generated  using  the  X protocol SendEvent request) should be
               interpreted or discarded.  The  default  is  ‘‘false’’  meaning
               they  are  discarded.  Note that allowing such events creates a
               very large security hole.  The default is ‘‘false.’’

       allowWindowOps (class AllowWindowOps)
               Specifies whether extended window control sequences (as used in
               dtterm) for should be allowed.  The default is ‘‘true.’’

       alwaysHighlight (class AlwaysHighlight)
               Specifies   whether  or  not  xterm  should  always  display  a
               highlighted text cursor.   By  default  (if  this  resource  is
               false),  a hollow text cursor is displayed whenever the pointer
               moves out of the window or the window loses  the  input  focus.
               The default is ‘‘false.’’

       alwaysUseMods (class AlwaysUseMods)
               Override the numLock resource, telling xterm to use the Alt and
               Meta  modifiers  to  construct  parameters  for  function   key
               sequences  even  if  those modifiers appear in the translations
               resource.  The default is ‘‘false.’’

       answerbackString (class AnswerbackString)
               Specifies the string that xterm sends in  response  to  an  ENQ
               (control/E)  character  from  the host.  The default is a blank
               string, i.e., ‘‘’’.  A hardware VT100 implements  this  feature
               as a setup option.

       appcursorDefault (class AppcursorDefault)
               If ‘‘true,’’ the cursor keys are initially in application mode.
               This is the same as the VT102 private DECCKM mode, The  default
               is ‘‘false.’’

       appkeypadDefault (class AppkeypadDefault)
               If ‘‘true,’’ the keypad keys are initially in application mode.
               The default is ‘‘false.’’

       autoWrap (class AutoWrap)
               Specifies whether or not  auto-wraparound  should  be  enabled.
               This is the same as the VT102 DECAWM.  The default is ‘‘true.’’

       awaitInput (class AwaitInput)
               Specifies whether or  not  the  xterm  uses  a  50  millisecond
               timeout  to  await  input  (i.e.,  to  support  the Xaw3d arrow
               scrollbar).  The default is ‘‘false.’’

       backarrowKey (class BackarrowKey)
               Specifies whether the backarrow key transmits a  backspace  (8)
               or  delete  (127)  character.   This  corresponds to the DECBKM
               control  sequence.   The  default  (backspace)   is   ‘‘true.’’
               Pressing the control key toggles this behavior.

       background (class Background)
               Specifies  the  color  to use for the background of the window.
               The default is ‘‘white.’’

       bellOnReset (class BellOnReset)
               Specifies whether to sound a bell when doing a hard reset.  The
               default is ‘‘true.’’

       bellSuppressTime (class BellSuppressTime)
               Number  of  milliseconds  after  a  bell command is sent during
               which additional bells will be suppressed.  Default is 200.  If
               set  non-zero,  additional  bells will also be suppressed until
               the server reports that processing of the first bell  has  been
               completed; this feature is most useful with the visible bell.

       boldColors (class ColorMode)
               Specifies  whether  to  combine bold attribute with colors like
               the IBM PC, i.e., map colors 0 through 7 to  colors  8  through
               15.   These  normally  are the brighter versions of the first 8
               colors, hence bold.  The default is ‘‘true.’’

       boldFont (class BoldFont)
               Specifies  the  name  of  the  bold  font  to  use  instead  of
               overstriking.  There is no default for this resource.

       boldMode (class BoldMode)
               This  specifies  whether  or  not  text with the bold attribute
               should be overstruck to simulate bold  fonts  if  the  resolved
               bold  font is the same as the normal font.  It may be desirable
               to disable bold fonts when color is being  used  for  the  bold
               attribute.  Note that xterm has one bold font which you may set
               explicitly.  It attempts to match a bold  font  for  the  other
               font  selections (font1 through font6).  If the normal and bold
               fonts are distinct, this resource has no effect.   The  default
               is ‘‘true.’’

               Although  xterm  attempts  to  match a bold font for other font
               selections, the font server may not  cooperate.   Since  X11R6,
               bitmap  fonts  have  been  scaled.   The  font server claims to
               provide the bold font that xterm requests, but  the  result  is
               not  always  readable.  XFree86 provides a feature which can be
               used to suppress the scaling.  In the X server’s  configuration
               file (e.g., "/etc/X11/XFree86"), you can add ":unscaled" to the
               end of the directory specification for the "misc" fonts,  which
               comprise  the  fixed-pitch  fonts  that are used by xterm.  For
               example
                    FontPath  "/usr/lib/X11/fonts/misc/"

               would become
                    FontPath  "/usr/lib/X11/fonts/misc/:unscaled"

               Depending on your configuration, the font server may  have  its
               own  configuration  file.  The same ":unscaled" can be added to
               its  configuration  file  at   the   end   of   the   directory
               specification for "misc".

       brokenLinuxOSC (class BrokenLinuxOSC)
               If true, xterm applies a workaround to ignore malformed control
               sequences that a Linux script might send.  Compare the  palette
               control  sequences  documented  in  console_codes with ECMA-48.
               The default is ‘‘true.’’

       brokenSelections (class BrokenSelections)
               If true, xterm in 8-bit mode will interpret  STRING  selections
               as  carrying  text  in the current locale’s encoding.  Normally
               STRING selections carry ISO-8859-1 encoded text.  Setting  this
               resource  to  ‘‘true’’  violates the ICCCM; it may, however, be
               useful for interacting with some broken X clients.  The default
               is ‘‘false.’’

       brokenStringTerm (class BrokenStringTerm)
               provides  a  work-around  for  some ISDN routers which start an
               application control string without completing it.  Set this  to
               ‘‘true’’  if  xterm  appears  to  freeze  when connecting.  The
               default is ‘‘false.’’

       c132 (class C132)
               Specifies whether or not the  VT102  DECCOLM  escape  sequence,
               used  to  switch between 80 and 132 columns, should be honored.
               The default is ‘‘false.’’

       cacheDoublesize (class CacheDoublesize)
               Specifies the maximum number of double-sized  fonts  which  are
               cached  by  xterm.  The default (8) may be too large for some X
               terminals with limited memory.  Set this  to  zero  to  disable
               doublesize fonts altogether.

       charClass (class CharClass)
               Specifies  comma-separated lists of character class bindings of
               the form [low-]high:value.  These are used in determining which
               sets  of  characters  should be treated the same when doing cut
               and paste.  See the CHARACTER CLASSES section.

       cjkWidth (class CjkWidth)
               Specifies whether xterm  should  follow  the  traditional  East
               Asian  width  convention.  When turned on, characters with East
               Asian Ambiguous (A) category in UTR 11 have a column  width  of
               2.   You  may  have  to set this option to ‘‘true’’ if you have
               some old East Asian terminal based programs  that  assume  that
               line-drawing  characters have a column width of 2.  The default
               is ‘‘false.’’

       color0 (class Color0)

       color1 (class Color1)

       color2 (class Color2)

       color3 (class Color3)

       color4 (class Color4)

       color5 (class Color5)

       color6 (class Color6)

       color7 (class Color7)
               These specify the colors  for  the  ISO  6429  extension.   The
               defaults  are,  respectively,  black,  red3, green3, yellow3, a
               customizable dark  blue,  magenta3,  cyan3,  and  gray90.   The
               default  shades of color are chosen to allow the colors 8-15 to
               be used as brighter versions.

       color8 (class Color8)

       color9 (class Color9)

       color10 (class Color10)

       color11 (class Color11)

       color12 (class Color12)

       color13 (class Color13)

       color14 (class Color14)

       color15 (class Color15)
               These specify the colors for the ISO 6429 extension if the bold
               attribute  is  also  enabled.   The default resource values are
               respectively, gray30, red, green, yellow, a customizable  light
               blue, magenta, cyan, and white.

       color16 (class Color16)

       through

       color255 (class Color255)
               These  specify  the  colors  for  the 256-color extension.  The
               default resource values are for colors 16 through 231 to make a
               6x6x6  color  cube,  and  colors  232  through  255  to  make a
               grayscale ramp.

       colorAttrMode (class ColorAttrMode)
               Specifies whether colorBD, colorBL, colorRV, and colorUL should
               override ANSI colors.  If not, these are displayed only when no
               ANSI colors have been set for the corresponding position.   The
               default is ‘‘false.’’

       colorBD (class ColorBD)
               This  specifies  the color to use to display bold characters if
               the  ‘‘colorBDMode’’  resource  is  enabled.   The  default  is
               ‘‘XtDefaultForeground.’’

       colorBDMode (class ColorAttrMode)
               Specifies  whether characters with the bold attribute should be
               displayed in color or as bold characters.   Note  that  setting
               colorMode off disables all colors, including bold.  The default
               is ‘‘false.’’

       colorBL (class ColorBL)
               This specifies the color to use to display blink characters  if
               the  ‘‘colorBLMode’’  resource  is  enabled.   The  default  is
               ‘‘XtDefaultForeground.’’

       colorBLMode (class ColorAttrMode)
               Specifies whether characters with the blink attribute should be
               displayed  in  color.  Note that setting colorMode off disables
               all colors, including this.  The default is ‘‘false.’’

       colorMode (class ColorMode)
               Specifies whether or not recognition of ANSI (ISO  6429)  color
               change  escape  sequences  should  be  enabled.  The default is
               ‘‘true.’’

       colorRV (class ColorRV)
               This specifies the color to use to display  reverse  characters
               if  the  ‘‘colorRVMode’’  resource  is enabled.  The default is
               ‘‘XtDefaultForeground.’’

       colorRVMode (class ColorAttrMode)
               Specifies whether characters with the reverse attribute  should
               be  displayed  in  color.   Note  that  setting  colorMode  off
               disables all colors, including this.  The default is ‘‘false.’’

       colorUL (class ColorUL)
               This   specifies   the  color  to  use  to  display  underlined
               characters if the ‘‘colorULMode’’  resource  is  enabled.   The
               default is ‘‘XtDefaultForeground.’’

       colorULMode (class ColorAttrMode)
               Specifies  whether  characters  with  the  underline  attribute
               should be displayed in color or as underlined characters.  Note
               that  setting  colorMode  off  disables  all  colors, including
               underlining.  The default is ‘‘false.’’

       ctrlFKeys (class CtrlFKeys)
               In VT220 keyboard mode (see  sunKeyboard  resource),  specifies
               the  amount  by  which to shift F1-F12 given a control modifier
               (CTRL).  This allows you to generate key symbols for F10-F20 on
               a  Sun/PC  keyboard.   The  default is ‘‘10’’, which means that
               CTRL F1 generates the key symbol for F11.

       curses (class Curses)
               Specifies whether or not the last column bug in more(1)  should
               be worked around.  See the -cu option for details.  The default
               is ‘‘false.’’

       cursorBlink (class CursorBlink)
               Specifies whether to make the cursor  blink.   The  default  is
               ‘‘false.’’

       cursorColor (class CursorColor)
               Specifies the color to use for the text cursor.  The default is
               ‘‘black.’’

       cursorOffTime (class CursorOffTime)
               Specifies the duration of the "off" part of  the  cursor  blink
               cycle-time  in  milliseconds.   The same timer is used for text
               blinking.  The default is 300.

       cursorOnTime (class CursorOnTime)
               Specifies the duration of the "on" part  of  the  cursor  blink
               cycle-time,  in  milliseconds.  The same timer is used for text
               blinking.  The default is 600.

       cutNewline (class CutNewline)
               If ‘‘false’’, triple clicking to select a line does not include
               the  Newline  at the end of the line.  If ‘‘true’’, the Newline
               is selected.  The default is ‘‘true.’’

       cutToBeginningOfLine (class CutToBeginningOfLine)
               If ‘‘false’’, triple clicking to select  a  line  selects  only
               from the current word forward.  If ‘‘true’’, the entire line is
               selected.  The default is ‘‘true.’’

       decTerminalID (class DecTerminalID)
               Specifies the emulation  level  (100=VT100,  220=VT220,  etc.),
               used  to  determine  the  type  of  response  to  a  DA control
               sequence.  Leading  non-digit  characters  are  ignored,  e.g.,
               "vt100" and "100" are the same.  The default is 100.

       deleteIsDEL (class DeleteIsDEL)
               Specifies  whether  the Delete key on the editing keypad should
               send DEL (127) or the VT220-style Remove escape sequence.   The
               default is ‘‘false,’’ for the latter.

       dynamicColors (class DynamicColors)
               Specifies  whether  or  not  escape  sequences to change colors
               assigned to different attributes are recognized.

       eightBitControl (class EightBitControl)
               Specifies whether or not control sequences sent by the terminal
               should  be  eight-bit  characters  or  escape  sequences.   The
               default is ‘‘false.’’

       eightBitInput (class EightBitInput)
               If ‘‘true’’, Meta characters (a single-byte character  combined
               with  the  keys  modifier  key)  input  from  the  keyboard are
               presented as a single character with the eighth bit turned  on.
               The  terminal  is  put  into  8-bit  mode.   If ‘‘false’’, Meta
               characters are converted into a two-character sequence with the
               character  itself  preceded by ESC.  On startup, xterm tries to
               put the terminal into 7-bit mode.  The metaSendsEscape resource
               may override this.  The default is ‘‘true.’’

               Generally keyboards do not have a key labeled "Meta", but "Alt"
               keys are common, and they are conventionally used  for  "Meta".
               If  they were synonymous, it would have been reasonable to name
               this resource "altSendsEscape", reversing its sense.  For  more
               background on this, see the meta function in curses.

               Note  that  the Alt key is not necessarily the same as the Meta
               modifier.   xmodmap  lists  your  key  modifiers.   X   defines
               modifiers  for  shift,  (caps)  lock  and control, as well as 5
               additional modifiers which are generally used to configure  key
               modifiers.   xterm  inspects  the  same information to find the
               modifier associated with either Meta key (left or  right),  and
               uses  that  key  as  the  Meta modifier.  It also looks for the
               NumLock key, to recognize the modifier which is associated with
               that.

               If  your  xmodmap configuration uses the same keycodes for Alt-
               and Meta-keys, xterm will only  see  the  Alt-key  definitions,
               since  those  are  tested  before Meta-keys.  NumLock is tested
               first.  It is important to keep these keys distinct;  otherwise
               some of xterm’s functionality is not available.

       eightBitOutput (class EightBitOutput)
               Specifies  whether  or  not  eight-bit characters sent from the
               host should be accepted as is or stripped  when  printed.   The
               default  is ‘‘true,’’ which means that they are accepted as is.

       faceName (class FaceName)
               Specify the  pattern  for  fonts  selected  from  the  FreeType
               library  if  support  for that library was compiled into xterm.
               There is no default.  If not specified, or if there is no match
               for both normal and bold fonts, xterm uses the font and related
               resources.

       faceNameDoublesize (class FaceNameDoublesize)
               Specify an double-width font for  cases  where  an  application
               requires this, e.g., in CJK applications.  There is no default.
               If  the  application  uses  double-wide  characters  and   this
               resource  is not given, xterm  will use a scaled version of the
               font given by faceName.

       faceSize (class FaceSize)
               Specify the pointsize for  fonts  selected  from  the  FreeType
               library  if  support  for that library was compiled into xterm.
               The default is ‘‘14.’’

       font (class Font)
               Specifies  the  name  of  the  normal  font.   The  default  is
               ‘‘fixed.’’

               See  the discussion of the locale resource, which describes how
               this font may be overridden.

               NOTE: some resource files use patterns such as
               *font: fixed

               which are overly broad, affecting both
               xterm.vt100.font

               and
               xterm.vt100..utf8fonts.font

               which is probably not what you intended.

       font1 (class Font1)
               Specifies the name of the first alternative font.

       font2 (class Font2)
               Specifies the name of the second alternative font.

       font3 (class Font3)
               Specifies the name of the third alternative font.

       font4 (class Font4)
               Specifies the name of the fourth alternative font.

       font5 (class Font5)
               Specifies the name of the fifth alternative font.

       font6 (class Font6)
               Specifies the name of the sixth alternative font.

       fontDoublesize (class FontDoublesize)
               Specifies whether xterm should attempt to use font  scaling  to
               draw  doublesize characters.  Some older font servers cannot do
               this  properly,  will  return  misleading  font  metrics.   The
               default   is   ‘‘true’’.   If  disabled,  xterm  will  simulate
               doublesize characters by drawing normal characters with  spaces
               between them.

       forceBoxChars (class ForceBoxChars)
               Specifies whether xterm should assume the normal and bold fonts
               have VT100 line-drawing characters.  The fixed-pitch fonts used
               by  xterm  normally have the VT100 line-drawing glyphs in cells
               1-31.  Other fixed-pitch fonts may be more attractive, but lack
               these  glyphs.   If  ‘‘false’’,  xterm  will  check for missing
               glyphs in cells 1-31 and make line-drawing characters directly.
               If  ‘‘true’’,  xterm  uses  whatever  is  in cells 1-31 without
               checking.  The default is ‘‘false.’’

       foreground (class Foreground)
               Specifies the color to use for displaying text in  the  window.
               Setting  the class name instead of the instance name is an easy
               way to have everything that would normally appear in  the  text
               color change color.  The default is ‘‘black.’’

       freeBoldBox (class freeBoldBox)
               Specifies  whether  xterm  should assume the bounding boxes for
               normal and bold fonts  are  compatible.   If  ‘‘false’’,  xterm
               compares them and will reject choices of bold fonts that do not
               match the size of the normal font.  The default  is  ‘‘false’’,
               which means that the comparison is performed.

       geometry (class Geometry)
               Specifies  the preferred size and position of the VT102 window.
               There is no default for this resource.

       highlightColor (class HighlightColor)
               Specifies the color to use for the background  of  selected  or
               otherwise highlighted text.  If not specified, reverse video is
               used.  The default is ‘‘XtDefaultForeground.’’

       highlightSelection (class HighlightSelection)
               If ‘‘false’’, selecting with the mouse highlights all positions
               on  the  screen  between the beginning of the selection and the
               current position.   If  ‘‘true’’,  xterm  highlights  only  the
               positions  that contain text that can be selected.  The default
               is ‘‘false.’’

               Depending on the way your applications  write  to  the  screen,
               there  may  be trailing blanks on a line.  Xterm stores data as
               it is shown on the screen.  Erasing  the  display  changes  the
               internal state of each cell so it is not considered a blank for
               the purpose of selection.  Blanks written since the last  erase
               are  selectable.  If you do not wish to have trailing blanks in
               a selection, use the trimSelection resource.

       hpLowerleftBugCompat (class HpLowerleftBugCompat)
               Specifies whether to work around  a  bug  in  HP’s  xdb,  which
               ignores  termcap  and  always  sends ESC F to move to the lower
               left corner.  ‘‘true’’ causes xterm to interpret  ESC  F  as  a
               request  to  move  to the lower left corner of the screen.  The
               default is ‘‘false.’’

       i18nSelections (class I18nSelections)
               If false, xterm will never request the targets COMPOUND_TEXT or
               TEXT.  The default is ‘‘true.’’ It may be set to false in order
               to work around ICCCM violations by other X clients.

       iconBorderColor (class BorderColor)
               Specifies the border color for the active icon window  if  this
               feature  is  compiled into xterm.  Not all window managers will
               make the icon border visible.

       iconBorderWidth (class BorderWidth)
               Specifies the border width for the active icon window  if  this
               feature  is  compiled  into  xterm.  The default is 2.  Not all
               window managers will make the border visible.

       iconFont (class IconFont)
               Specifies the font for the miniature  active  icon  window,  if
               this feature is compiled into xterm.  The default is "nil2".

       internalBorder (class BorderWidth)
               Specifies  the  number of pixels between the characters and the
               window border.  The default is 2.

       italicULMode (class ColorAttrMode)
               Specifies  whether  characters  with  the  underline  attribute
               should  be  displayed  in  an  italic  font  or  as  underlined
               characters.

       jumpScroll (class JumpScroll)
               Specifies whether or not jump  scroll  should  be  used.   This
               corresponds  to the VT102 DECSCLM private mode.  The default is
               ‘‘true.’’

       keyboardDialect (class KeyboardDialect)
               Specifies the initial keyboard dialect, as well as the  default
               value  when the terminal is reset.  The value given is the same
               as the final character in the control  sequences  which  change
               character  sets.  The default is ‘‘B’’, which corresponds to US
               ASCII.

       nameKeymap (class NameKeymap)
               See the discussion of the keymap() action.

       limitResize (class LimitResize)
               Limits resizing of the screen via control sequence to  a  given
               multiple of the display dimensions.  The default is ‘‘1’’.

       locale (class Locale)
               Specifies  how to use luit, an encoding converter between UTF-8
               and locale encodings.  The resource value (ignoring  case)  may
               be:

               true
                   xterm  will  use  the  encoding  specified  by  the  users’
                   LC_CTYPE locale (i.e., LC_ALL, LC_CTYPE, or LANG variables)
                   as  far  as  possible.  This is realized by always enabling
                   UTF-8 mode and invoking luit in non-UTF-8 locales.

               medium
                   xterm will follow users’ LC_CTYPE locale  only  for  UTF-8,
                   east  Asian, and Thai locales, where the encodings were not
                   supported by conventional 8bit mode  with  changing  fonts.
                   For other locales, xterm will use conventional 8bit mode.

               checkfont
                   If  mini-luit is compiled-in, xterm will check if a Unicode
                   font has been specified.  If so, it checks if the character
                   encoding  for  the  current  locale  is  POSIX,  Latin-1 or
                   Latin-9, uses the appropriate mapping to support those with
                   the  Unicode font.  For other encodings, xterm assumes that
                   UTF-8 encoding is required.

               false
                   xterm  will  use  conventional  8bit  mode  or  UTF-8  mode
                   according to utf8 resource or -u8 option.

               Any  other  value, e.g., ‘‘UTF-8’’ or ‘‘ISO8859-2’’, is assumed
               to be an encoding name; luit will be  invoked  to  support  the
               encoding.   The  actual  list of supported encodings depends on
               luit.  The default is ‘‘medium’’.

               Regardless of your locale and encoding, you need an ISO-10646-1
               font to display the result.  Your configuration may not include
               this font, or locale-support by xterm may not  be  needed.   At
               startup,  xterm  uses  a  mechanism  equivalent to the load-vt-
               fonts(utf8Fonts, Utf8Fonts)   action   to   load   font    name
               subresources  of  the VT100 widget.  That is, resource patterns
               such as "*vt100.utf8Fonts.font" will be loaded,  and  (if  this
               resource  is  enabled),  override  the  normal  fonts.   If  no
               subresources are found, the normal fonts such as "*vt100.font",
               etc.,  are used.  The resource files distributed with xterm use
               ISO-10646-1 fonts, but do not rely on them unless you are using
               the locale mechanism.

       localeFilter (class LocaleFilter)
               Specifies  the  file  name  for  the encoding converter from/to
               locale encodings and UTF-8 which is used with the -lc option or
               locale  resource.   The  help  message shown by ‘‘xterm -help’’
               lists  the  default  value,  which  depends  on   your   system
               configuration.

       loginShell (class LoginShell)
               Specifies  whether  or  not  the  shell to be run in the window
               should be started as a login shell.  The default is  ‘‘false.’’

       marginBell (class MarginBell)
               Specifies  whether or not the bell should be rung when the user
               types near the right margin.  The default is ‘‘false.’’

       metaSendsEscape (class MetaSendsEscape)
               If ‘‘true’’, Meta characters (a  character  combined  with  the
               Meta  modifier key) are converted into a two-character sequence
               with the character itself preceded by  ESC.   This  applies  as
               well  to function key control sequences, unless xterm sees that
               Meta is used in your  key  translations.   If  ‘‘false’’,  Meta
               characters input from the keyboard are handled according to the
               eightBitInput resource.  The default is ‘‘false.’’

       mkWidth (class MkWidth)
               Specifies whether xterm should use a built-in  version  of  the
               wide character width calculation.  The default is ‘‘false.’’

       modifyCursorKeys (class ModifyCursorKeys)
               Tells  how  to  handle the special case where Control-, Shift-,
               Alt- or Meta-modifiers are used  to  add  a  parameter  to  the
               escape  sequence  returned by a cursor-key.  Set it to 0 to use
               the old/obsolete behavior.  Set it  to  1  to  prefix  modified
               sequences  with  CSI.   Set it to 2 to force the modifier to be
               the second parameter.  Set it to 3 to mark the sequence with  a
               ’>’ to hint that it is private.  The default is ‘‘2’’.

       multiClickTime (class MultiClickTime)
               Specifies  the maximum time in milliseconds between multi-click
               select events.  The default is 250 milliseconds.

       multiScroll (class MultiScroll)
               Specifies   whether   or   not   scrolling   should   be   done
               asynchronously.  The default is ‘‘false.’’

       nMarginBell (class Column)
               Specifies  the  number  of  characters from the right margin at
               which the margin bell should be rung, when enabled.

       numLock (class NumLock)
               If ‘‘true’’, xterm checks if NumLock is used as a modifier (see
               xmodmap(1)).   If  so,  this  modifier  is used to simplify the
               logic when implementing special  NumLock  for  the  sunKeyboard
               resource.   Also  (when sunKeyboard is false), similar logic is
               used to find the modifier associated with the  left  and  right
               Alt keys.  The default is ‘‘true.’’

       oldXtermFKeys (class OldXtermFKeys)
               If  ‘‘true’’,  xterm  will  use old-style control sequences for
               function keys F1 to F4, for  compatibility  with  X  Consortium
               xterm.   Otherwise,  it  uses  the VT100-style codes for PF1 to
               PF4.  The default is ‘‘false.’’

       pointerColor (class PointerColor)
               Specifies the foreground color of the pointer.  The default  is
               ‘‘XtDefaultForeground.’’

       pointerColorBackground (class PointerColorBackground)
               Specifies  the background color of the pointer.  The default is
               ‘‘XtDefaultBackground.’’

       pointerShape (class Cursor)
               Specifies the name of the shape of the pointer.  The default is
               ‘‘xterm.’’

       popOnBell (class PopOnBell)
               Specifies whether the window whould be raised when Control-G is
               received.  The default is ‘‘false.’’

       printAttributes (class PrintAttributes)
               Specifies whether to print graphic attributes  along  with  the
               text.   A  real  DEC  VTxxx  terminal will print the underline,
               highlighting codes but your printer may not  handle  these.   A
               ‘‘0’’  disables  the attributes.  A ‘‘1’’ prints the normal set
               of  attributes  (bold,  underline,  inverse   and   blink)   as
               VT100-style  control  sequences.   A  ‘‘2’’  prints  ANSI color
               attributes as well.  The default is ‘‘1.’’

       printerAutoClose (class PrinterAutoClose)
               If ‘‘true’’, xterm will close the printer  (a  pipe)  when  the
               application  switches  the  printer  offline  with a Media Copy
               command.  The default is ‘‘false.’’

       printerCommand (class PrinterCommand)
               Specifies a shell command to which xterm will open a pipe  when
               the first MC (Media Copy) command is initiated.  The default is
               a blank string.  If the resource value  is  given  as  a  blank
               string, the printer is disabled.

       printerControlMode (class PrinterControlMode)
               Specifies  the printer control mode.  A ‘‘1’’ selects autoprint
               mode, which causes xterm to print a line from the  screen  when
               you  move  the cursor off that line with a line feed, form feed
               or vertical tab character, or an  autowrap  occurs.   Autoprint
               mode  is overridden by printer controller mode (a ‘‘2’’), which
               causes all of the output to be directed to  the  printer.   The
               default is ‘‘0.’’

       printerExtent (class PrinterExtent)
               Controls  whether  a  print page function will print the entire
               page (true), or only  the  the  portion  within  the  scrolling
               margins (false).  The default is ‘‘false.’’

       printerFormFeed (class PrinterFormFeed)
               Controls  whether a form feed is sent to the printer at the end
               of a print page function.  The default is ‘‘false.’’

       renderFont (class RenderFont)
               If xterm is built with the Xft library, this  controls  whether
               the faceName resource is used.  The default is ‘‘true.’’

       resizeGravity (class ResizeGravity)
               Affects the behavior when the window is resized to be taller or
               shorter.  NorthWest specifies that the top line of text on  the
               screen  stay  fixed.   If the window is made shorter, lines are
               dropped from the bottom; if the window is  made  taller,  blank
               lines  are  added  at  the bottom.  This is compatible with the
               behavior in R4.  SouthWest (the  default)  specifies  that  the
               bottom line of text on the screen stay fixed.  If the window is
               made taller, additional saved lines will be scrolled down  onto
               the  screen;  if  the  window  is  made  shorter, lines will be
               scrolled off the top of the screen, and  the  top  saved  lines
               will be dropped.

       reverseVideo (class ReverseVideo)
               Specifies  whether  or  not  reverse video should be simulated.
               The default is ‘‘false.’’

       reverseWrap (class ReverseWrap)
               Specifies whether or not reverse-wraparound should be  enabled.
               This  corresponds  to  xterm’s private mode 45.  The default is
               ‘‘false.’’

       rightScrollBar (class RightScrollBar)
               Specifies whether or not the scrollbar should be  displayed  on
               the right rather than the left.  The default is ‘‘false.’’

       saveLines (class SaveLines)
               Specifies  the  number  of  lines to save beyond the top of the
               screen when a scrollbar is turned on.  The default is 64.

       scrollBar (class ScrollBar)
               Specifies whether or not the  scrollbar  should  be  displayed.
               The default is ‘‘false.’’

       scrollBarBorder (class ScrollBarBorder)
               Specifies the width of the scrollbar border.  Note that this is
               drawn to overlap the border of the xterm window.  Modifying the
               scrollbar’s  border  affects  only  the  line between the VT100
               widget and the scrollbar.  The default value is 1.

       scrollKey (class ScrollCond)
               Specifies whether or not pressing a  key  should  automatically
               cause  the  scrollbar  to  go  to  the  bottom of the scrolling
               region.  This corresponds to xterm’s private  mode  1011.   The
               default is ‘‘false.’’

       scrollLines (class ScrollLines)
               Specifies  the number of lines that the scroll-back and scroll-
               forw actions should use as a default.  The default value is  1.

       scrollTtyOutput (class ScrollCond)
               Specifies   whether  or  not  output  to  the  terminal  should
               automatically cause the scrollbar to go to the  bottom  of  the
               scrolling region.  The default is ‘‘true.’’

       shiftFonts (class ShiftFonts)
               Specifies  whether  to  enable the actions larger-vt-font() and
               smaller-vt-font(), which are  normally  bound  to  the  shifted
               KP_Add and KP_Subtract.  The default is ‘‘true.’’

       showBlinkAsBold (class ShowBlinkAsBold)
               Tells  xterm  whether  to display text with blink-attribute the
               same as bold.  If xterm has  not  been  configured  to  support
               blinking  text,  the default is ‘‘true.’’, which corresponds to
               older versions of xterm, otherwise the default is ‘‘false.’’

       showMissingGlyphs (class ShowMissingGlyphs)
               Tells xterm whether to display a box outlining places  where  a
               character  has been used that the font does not represent.  The
               default is ‘‘false.’’

       signalInhibit (class SignalInhibit)
               Specifies whether or not the entries in  the  ‘‘Main  Options’’
               menu  for  sending  signals to xterm should be disallowed.  The
               default is ‘‘false.’’

       tekGeometry (class Geometry)
               Specifies the preferred size  and  position  of  the  Tektronix
               window.  There is no default for this resource.

       tekInhibit (class TekInhibit)
               Specifies whether or not the escape sequence to enter Tektronix
               mode should be ignored.  The default is ‘‘false.’’

       tekSmall (class TekSmall)
               Specifies whether or not the Tektronix mode window should start
               in its smallest size if no explicit geometry is given.  This is
               useful when running xterm on displays with small screens.   The
               default is ‘‘false.’’

       tekStartup (class TekStartup)
               Specifies  whether  or  not  xterm should start up in Tektronix
               mode.  The default is ‘‘false.’’

       tiXtraScroll (class TiXtraScroll)
               Specifies whether xterm  should  scroll  to  a  new  page  when
               processing  the  ti  termcap entry, i.e., the private modes 47,
               1047 or 1049.   This  is  only  in  effect  if  titeInhibit  is
               ‘‘true’’,  because  the  intent  of this option is to provide a
               picture  of  the  full-screen  application’s  display  on   the
               scrollback  without  wiping  out  the  text that would be shown
               before the application was initialized.  The default  for  this
               resource is ‘‘false.’’

       titeInhibit (class TiteInhibit)
               Specifies  whether or not xterm should remove ti and te termcap
               entries (used to switch between alternate screens on startup of
               many  screen-oriented  programs)  from  the TERMCAP string.  If
               set, xterm also ignores the escape sequence to  switch  to  the
               alternate  screen.  Xterm supports terminfo in a different way,
               supporting composite control sequences (also known  as  private
               modes)  1047,  1048  and 1049 which have the same effect as the
               original 47 control sequence.  The default for this resource is
               ‘‘false.’’

       translations (class Translations)
               Specifies  the  key  and button bindings for menus, selections,
               ‘‘programmed strings,’’ etc.  The translations resource,  which
               provides much of xterm’s configurability, is a feature of the X
               Toolkit Intrinsics library (Xt).  See the ACTIONS section.

       trimSelection (class TrimSelection)
               If you set highlightSelection, you can see the  text  which  is
               selected,  including  any trailing spaces.  Clearing the screen
               (or a line) resets it to a state containing  no  spaces.   Some
               lines  may  contain  trailing spaces when an application writes
               them to the screen.  However, you may not wish to  paste  lines
               with  trailing  spaces.   If  this resource is true, xterm will
               trim trailing spaces from text which is selected.  It does  not
               affect  spaces which result in a wrapped line, nor will it trim
               the trailing newline  from  your  selection.   The  default  is
               ‘‘false.’’

       underLine (class UnderLine)
               This specifies whether or not text with the underline attribute
               should  be  underlined.   It  may  be  desirable   to   disable
               underlining   when  color  is  being  used  for  the  underline
               attribute.  The default is ‘‘true.’’

       utf8 (class Utf8)
               This specifies whether xterm will run in UTF-8  mode.   If  you
               set  this resource, xterm also sets the wideChars resource as a
               side-effect.  The resource is an  integer,  expected  to  range
               from 0 to 3:

               0      UTF-8  mode  is  initially off.  The command-line option
                      +u8 sets the resource to this value.   Escape  sequences
                      for turning UTF-8 mode on/off are allowed.

               1      UTF-8  mode  is  initially  on.   Escape  sequences  for
                      turning UTF-8 mode on/off are allowed.

               2      The command-line option -u8 sets the  resource  to  this
                      value.   Escape  sequences for turning UTF-8 mode on/off
                      are ignored.

               3      This is the  default  value  of  the  resource.   It  is
                      changed  during  initialization depending on whether the
                      locale resource was set, to 0  or  2.   See  the  locale
                      resource for additional discussion of non-UTF-8 locales.

               If you want to set the value of utf8,  it  should  be  in  this
               range.   Other  nonzero  values  are treated the same as ‘‘1’’,
               i.e., UTF-8 mode is initially  on,  and  escape  sequences  for
               turning UTF-8 mode on/off are allowed.

       utf8Fonts (class Utf8Fonts)
               See the discussion of the locale resource.

       veryBoldColors (class VeryBoldColors)
               Specifies  whether  to  combine  video  attributes  with colors
               specified  by  colorBD,  colorBL,  colorRV  and  colorUL.   The
               resource value is the sum of values for each attribute:
                 1 for reverse,
                 2 for underline,
                 4 for bold and
                 8 for blink.

               The default is ‘‘0.’’

       visualBell (class VisualBell)
               Specifies whether or not a visible bell (i.e., flashing) should
               be used instead of an audible bell when Control-G is  received.
               The default is ‘‘false.’’

       visualBellDelay (class VisualBellDelay)
               Number  of milliseconds to delay when displaying a visual bell.
               Default is 100.  If set to zero, no visual bell  is  displayed.
               This  is useful for very slow displays, e.g., an LCD display on
               a laptop.

       vt100Graphics (class VT100Graphics)
               This specifies  whether  xterm  will  interpret  VT100  graphic
               character escape sequences while in UTF-8 mode.  The default is
               ‘‘true’’, to provide support for various legacy applications.

       wideBoldFont (class WideBoldFont)
               This option specifies the font to be used for  displaying  bold
               wide  text.  By default, it will attempt to use a font twice as
               wide as the font that will be used to draw bold  text.   If  no
               doublewidth font is found, it will improvise, by stretching the
               bold font.

       wideChars (class WideChars)
               Specifies if xterm should respond  to  control  sequences  that
               process 16-bit characters.  The default is ‘‘false.’’

       wideFont (class WideFont)
               This  option  specifies the font to be used for displaying wide
               text.  By default, it will attempt to use a font twice as  wide
               as  the  font  that  will  be  used to draw normal text.  If no
               doublewidth font is found, it will improvise, by stretching the
               normal font.

       ximFont (class XimFont)
               This  option  specifies  the font to be used for displaying the
               preedit string in the "OverTheSpot" input method.

               In "OverTheSpot"  preedit  type,  the  preedit  (preconversion)
               string  is  displayed at the position of the cursor.  It is the
               XIM server’s responsibility to display the preedit string.  The
               XIM  client  must inform the XIM server of the cursor position.
               For best results, the preedit string must be displayed  with  a
               proper  font.   Therefore,  xterm informs the XIM server of the
               proper font.  The font is be supplied  by  a  "fontset",  whose
               default  value  is "*".  This matches every font, the X library
               automatically chooses fonts with proper charsets.  The  ximFont
               resource is provided to override this default font setting.

       The  following  resources  are  specified as part of the tek4014 widget
       (class  Tek4014).   These   are   specified   by   patterns   such   as
       "XTerm.tek4014.NAME":

       font2 (class Font)
               Specifies font number 2 to use in the Tektronix window.

       font3 (class Font)
               Specifies font number 3 to use in the Tektronix window.

       fontLarge (class Font)
               Specifies the large font to use in the Tektronix window.

       fontSmall (class Font)
               Specifies the small font to use in the Tektronix window.

       ginTerminator (class GinTerminator)
               Specifies  what  character(s)  should  follow  a  GIN report or
               status report.  The possibilities are ‘‘none,’’ which sends  no
               terminating   characters,   ‘‘CRonly,’’  which  sends  CR,  and
               ‘‘CR&EOT,’’ which sends  both  CR  and  EOT.   The  default  is
               ‘‘none.’’

       height (class Height)
               Specifies the height of the Tektronix window in pixels.

       initialFont (class InitialFont)
               Specifies  which  of the four Tektronix fonts to use initially.
               Values are the  same  as  for  the  set-tek-text  action.   The
               default is ‘‘large.’’

       width (class Width)
               Specifies the width of the Tektronix window in pixels.

       The resources that may be specified for the various menus are described
       in the documentation for the Athena SimpleMenu widget.   The  name  and
       classes  of  the  entries  in  each  of  the  menus  are  listed below.
       Resources named "lineN" where N is a number are separators  with  class
       SmeLine.

       The mainMenu has the following entries:

       toolbar (class SmeBSB)
               This entry invokes the set-toolbar(toggle) action.

       securekbd (class SmeBSB)
               This entry invokes the secure() action.

       allowsends (class SmeBSB)
               This entry invokes the allow-send-events(toggle) action.

       redraw (class SmeBSB)
               This entry invokes the redraw() action.

       logging (class SmeBSB)
               This entry invokes the logging(toggle) action.

       print (class SmeBSB)
               This entry invokes the print() action.

       print-redir (class SmeBSB)
               This entry invokes the print-redir() action.

       8-bit-control (class SmeBSB)
               This entry invokes the set-8-bit-control(toggle) action.

       backarrow key (class SmeBSB)
               This entry invokes the set-backarrow(toggle) action.

       num-lock (class SmeBSB)
               This entry invokes the set-num-lock(toggle) action.

       alt-esc (class SmeBSB)
               This entry invokes the alt-sends-escape(toggle) action.

       meta-esc (class SmeBSB)
               This entry invokes the meta-sends-escape(toggle) action.

       delete-is-del (class SmeBSB)
               This entry invokes the delete-is-del(toggle) action.

       oldFunctionKeys (class SmeBSB)
               This entry invokes the old-function-keys(toggle) action.

       hpFunctionKeys (class SmeBSB)
               This entry invokes the hp-function-keys(toggle) action.

       scoFunctionKeys (class SmeBSB)
               This entry invokes the sco-function-keys(toggle) action.

       sunFunctionKeys (class SmeBSB)
               This entry invokes the sun-function-keys(toggle) action.

       sunKeyboard (class SmeBSB)
               This entry invokes the sunKeyboard(toggle) action.

       suspend (class SmeBSB)
               This entry invokes the send-signal(tstp) action on systems that
               support job control.

       continue (class SmeBSB)
               This entry invokes the send-signal(cont) action on systems that
               support job control.

       interrupt (class SmeBSB)
               This entry invokes the send-signal(int) action.

       hangup (class SmeBSB)
               This entry invokes the send-signal(hup) action.

       terminate (class SmeBSB)
               This entry invokes the send-signal(term) action.

       kill (class SmeBSB)
               This entry invokes the send-signal(kill) action.

       quit (class SmeBSB)
               This entry invokes the quit() action.

       The vtMenu has the following entries:

       scrollbar (class SmeBSB)
               This entry invokes the set-scrollbar(toggle) action.

       jumpscroll (class SmeBSB)
               This entry invokes the set-jumpscroll(toggle) action.

       reversevideo (class SmeBSB)
               This entry invokes the set-reverse-video(toggle) action.

       autowrap (class SmeBSB)
               This entry invokes the set-autowrap(toggle) action.

       reversewrap (class SmeBSB)
               This entry invokes the set-reversewrap(toggle) action.

       autolinefeed (class SmeBSB)
               This entry invokes the set-autolinefeed(toggle) action.

       appcursor (class SmeBSB)
               This entry invokes the set-appcursor(toggle) action.

       appkeypad (class SmeBSB)
               This entry invokes the set-appkeypad(toggle) action.

       scrollkey (class SmeBSB)
               This entry invokes the set-scroll-on-key(toggle) action.

       scrollttyoutput (class SmeBSB)
               This entry invokes the set-scroll-on-tty-output(toggle) action.

       allow132 (class SmeBSB)
               This entry invokes the set-allow132(toggle) action.

       cursesemul (class SmeBSB)
               This entry invokes the set-cursesemul(toggle) action.

       visualbell (class SmeBSB)
               This entry invokes the set-visualbell(toggle) action.

       poponbell (class SmeBSB)
               This entry invokes the set-poponbell(toggle) action.

       marginbell (class SmeBSB)
               This entry invokes the set-marginbell(toggle) action.

       cursorblink (class SmeBSB)
               This entry invokes the set-cursorblink(toggle) action.

       titeInhibit (class SmeBSB)
               This entry invokes the set-titeInhibit(toggle) action.

       activeicon (class SmeBSB)
               This entry toggles active icons on and off if this feature  was
               compiled  into  xterm.  It is enabled only if xterm was started
               with the command line option +ai or the activeIcon resource  is
               set to ‘‘True.’’

       softreset (class SmeBSB)
               This entry invokes the soft-reset() action.

       hardreset (class SmeBSB)
               This entry invokes the hard-reset() action.

       clearsavedlines (class SmeBSB)
               This entry invokes the clear-saved-lines() action.

       tekshow (class SmeBSB)
               This entry invokes the set-visibility(tek,toggle) action.

       tekmode (class SmeBSB)
               This entry invokes the set-terminal-type(tek) action.

       vthide (class SmeBSB)
               This entry invokes the set-visibility(vt,off) action.

       altscreen (class SmeBSB)
               This entry invokes the set-altscreen(toggle) action.

       The fontMenu has the following entries:

       fontdefault (class SmeBSB)
               This entry invokes the set-vt-font(d) action.

       font1 (class SmeBSB)
               This entry invokes the set-vt-font(1) action.

       font2 (class SmeBSB)
               This entry invokes the set-vt-font(2) action.

       font3 (class SmeBSB)
               This entry invokes the set-vt-font(3) action.

       font4 (class SmeBSB)
               This entry invokes the set-vt-font(4) action.

       font5 (class SmeBSB)
               This entry invokes the set-vt-font(5) action.

       font6 (class SmeBSB)
               This entry invokes the set-vt-font(6) action.

       fontescape (class SmeBSB)
               This entry invokes the set-vt-font(e) action.

       fontsel (class SmeBSB)
               This entry invokes the set-vt-font(s) action.

       font-linedrawing (class SmeBSB)
               This entry invokes the set-font-linedrawing(s) action.

       font-doublesize (class SmeBSB)
               This entry invokes the set-font-doublesize(s) action.

       render-font (class SmeBSB)
               This entry invokes the set-render-font(s) action.

       utf8-mode (class SmeBSB)
               This entry invokes the set-utf8-mode(s) action.

       The tekMenu has the following entries:

       tektextlarge (class SmeBSB)
               This entry invokes the set-tek-text(l) action.

       tektext2 (class SmeBSB)
               This entry invokes the set-tek-text(2) action.

       tektext3 (class SmeBSB)
               This entry invokes the set-tek-text(3) action.

       tektextsmall (class SmeBSB)
               This entry invokes the set-tek-text(s) action.

       tekpage (class SmeBSB)
               This entry invokes the tek-page() action.

       tekreset (class SmeBSB)
               This entry invokes the tek-reset() action.

       tekcopy (class SmeBSB)
               This entry invokes the tek-copy() action.

       vtshow (class SmeBSB)
               This entry invokes the set-visibility(vt,toggle) action.

       vtmode (class SmeBSB)
               This entry invokes the set-terminal-type(vt) action.

       tekhide (class SmeBSB)
               This entry invokes the set-visibility(tek,toggle) action.

       The  following  resources  are  useful  when  specified  for the Athena
       Scrollbar widget:

       thickness (class Thickness)
               Specifies the width in pixels of the scrollbar.

       background (class Background)
               Specifies the color to use for the background of the scrollbar.

       foreground (class Foreground)
               Specifies the color to use for the foreground of the scrollbar.
               The ‘‘thumb’’ of the scrollbar is a simple checkerboard pattern
               alternating pixels for foreground and background color.

POINTER USAGE

       Once  the  VT102 window is created, xterm allows you to select text and
       copy it within the same or other windows.

       The selection functions are invoked when the pointer buttons  are  used
       with  no modifiers, and when they are used with the ‘‘shift’’ key.  The
       assignment of the functions described below to keys and buttons may  be
       changed through the resource database; see ACTIONS below.

       Pointer  button  one  (usually  left) is used to save text into the cut
       buffer.  Move the cursor to beginning of the text, and  then  hold  the
       button  down  while  moving  the  cursor  to  the end of the region and
       releasing the button.  The selected text is highlighted and is saved in
       the global cut buffer and made the PRIMARY selection when the button is
       released.  Double-clicking selects by words.   Triple-clicking  selects
       by  lines.  Quadruple-clicking goes back to characters, etc.  Multiple-
       click is determined by the time from button up to button down,  so  you
       can  change  the  selection unit in the middle of a selection.  Logical
       words and lines selected by double- or triple-clicking may wrap  across
       more  than one screen line if lines were wrapped by xterm itself rather
       than by the application running  in  the  window.   If  the  key/button
       bindings  specify  that  an X selection is to be made, xterm will leave
       the selected text highlighted for as long as it is the selection owner.

       Pointer  button two (usually middle) ‘types’ (pastes) the text from the
       PRIMARY selection, if any, otherwise from the cut buffer, inserting  it
       as keyboard input.

       Pointer  button  three  (usually  right) extends the current selection.
       (Without loss of  generality,  you  can  swap  ‘‘right’’  and  ‘‘left’’
       everywhere  in the rest of this paragraph.)  If pressed while closer to
       the right edge of the selection than the left, it extends/contracts the
       right  edge  of  the selection.  If you contract the selection past the
       left edge of the selection, xterm assumes you  really  meant  the  left
       edge,  restores the original selection, then extends/contracts the left
       edge of the selection.  Extension starts in  the  selection  unit  mode
       that  the  last  selection  or  extension  was  performed  in;  you can
       multiple-click to cycle through them.

       By cutting and pasting pieces of text without trailing new  lines,  you
       can  take  text  from  several  places  in different windows and form a
       command to the shell, for example, or take output from  a  program  and
       insert  it  into  your favorite editor.  Since cut buffers are globally
       shared among different applications, you may regard each  as  a  ‘file’
       whose contents you know.  The terminal emulator and other text programs
       should be treating it as if it were a text  file,  i.e.,  the  text  is
       delimited by new lines.

       The  scroll  region  displays the position and amount of text currently
       showing in the window (highlighted) relative  to  the  amount  of  text
       actually saved.  As more text is saved (up to the maximum), the size of
       the highlighted area decreases.

       Clicking button one with the pointer in the  scroll  region  moves  the
       adjacent line to the top of the display window.

       Clicking  button three moves the top line of the display window down to
       the pointer position.

       Clicking button two moves the display to a position in the  saved  text
       that corresponds to the pointer’s position in the scrollbar.

       Unlike  the  VT102  window,  the  Tektronix  window  does not allow the
       copying of text.  It does allow Tektronix GIN mode, and  in  this  mode
       the cursor will change from an arrow to a cross.  Pressing any key will
       send that key and the current coordinate of the cross cursor.  Pressing
       button  one,  two,  or three will return the letters ‘l’, ‘m’, and ‘r’,
       respectively.  If the ‘shift’ key is pressed when a pointer  button  is
       pressed, the corresponding upper case letter is sent.  To distinguish a
       pointer button from a key, the high bit of the character  is  set  (but
       this  is  bit is normally stripped unless the terminal mode is RAW; see
       tty(4) for details).

MENUS

       Xterm has four menus, named mainMenu, vtMenu,  fontMenu,  and  tekMenu.
       Each  menu  pops  up  under  the correct combinations of key and button
       presses.  Each menu is divided into sections, separated by a horizontal
       line.   Some  menu  entries correspond to modes that can be altered.  A
       check mark appears next to a mode that is currently active.   Selecting
       one of these modes toggles its state.  Other menu entries are commands;
       selecting one of these performs the indicated function.

       All of the menu entries correspond to X actions.  In  the  list  below,
       the menu label is shown followed by the action’s name in parenthesis.

       The  xterm mainMenu pops up when the ‘‘control’’ key and pointer button
       one are pressed in a window.  This menu contains items  that  apply  to
       both the VT102 and Tektronix windows.  There are several sections:

       Commands for managing X events:

              Toolbar
                     Clicking on the "Toolbar" menu entry hides the toolbar if
                     it is visible, and shows it if it is not.

              Secure Keyboard (securekbd)
                     The Secure  Keyboard  mode  is  helpful  when  typing  in
                     passwords   or   other  sensitive  data  in  an  unsecure
                     environment; see SECURITY below (but read the limitations
                     carefully).

              Allow SendEvents (allowsends )
                     Specifies  whether or not synthetic key and button events
                     generated using the X protocol SendEvent  request  should
                     be  interpreted  or  discarded.   This corresponds to the
                     allowSendEvents resource.

              Redraw Window (redraw)
                     Forces  the  X  display  to  repaint;  useful   in   some
                     environments.

       Commands for capturing output:

              Log to File (logging)
                     Captures  text sent to the screen in a logfile, as in the
                     -l logging option.

              Print Window (print)
                     Sends the text of the current window to the program given
                     in the printerCommand resource.

              Redirect to Printer (print-redir)
                     This  sets the printerControlMode to 0 or 2.  You can use
                     this to turn the printer on as if an application had sent
                     the  appropriate control sequence.  It is also useful for
                     switching the printer off if an application turns  it  on
                     without resetting the print control mode.

       Modes for setting keyboard style:

              8-Bit Controls (8-bit-control)
                     Enabled  for VT220 emulation, this controls whether xterm
                     will send 8-bit control sequences rather than using 7-bit
                     (ASCII)  controls,  e.g.,  sending  a  byte  in the range
                     128-159 rather than the escape character  followed  by  a
                     second  byte.   Xterm  always  interprets  both 8-bit and
                     7-bit control sequences (see the document  Xterm  Control
                     Sequences).   This  corresponds  to  the  eightBitControl
                     resource.

              Backarrow Key (BS/DEL) (backarrow key)
                     Modifies the behavior of the  backarrow  key,  making  it
                     transmit   either   a   backspace  (8)  or  delete  (127)
                     character.   This   corresponds   to   the   backarrowKey
                     resource.

              Alt/NumLock Modifiers (num-lock)
                     Controls the treatment of Alt- and NumLock-key modifiers.
                     This corresponds to the numLock resource.

              Meta Sends Escape (meta-esc)
                     Controls whether Meta keys  are  converted  into  a  two-
                     character  sequence with the character itself preceded by
                     ESC.  This corresponds to the metaSendsEscape resource.

              Delete is DEL (delete-is-del)
                     Controls whether the Delete key  on  the  editing  keypad
                     should  send  DEL  (127) or the VT220-style Remove escape
                     sequence.  This corresponds to the deleteIsDEL  resource.

              Old Function-Keys (oldFunctionKeys)

              HP Function-Keys (hpFunctionKeys)

              SCO Function-Keys (scoFunctionKeys)

              Sun Function-Keys (sunFunctionKeys)

              VT220 Keyboard (sunKeyboard)
                     These  act as a radio-button, selecting one style for the
                     keyboard  layout.   It  corresponds  to  more  than   one
                     resource     setting:    sunKeyboard,    sunFunctionKeys,
                     scoFunctionKeys and hpFunctionKeys ."

       Commands for process signalling:

              Send STOP Signal (suspend)

              Send CONT Signal (continue)

              Send INT Signal (interrupt)

              Send HUP Signal (hangup)

              Send TERM Signal (terminate)

              Send KILL Signal (kill)
                     These send the SIGTSTP, SIGCONT, SIGINT, SIGHUP,  SIGTERM
                     and SIGKILL signals respectively, to the process group of
                     the process running under xterm (usually the shell).  The
                     SIGCONT  function  is  especially  useful if the user has
                     accidentally typed CTRL-Z, suspending the process.

              Quit (quit)
                     Stop processing X events  except  to  support  the  -hold
                     option,  and then send a SIGHUP signal to the the process
                     group of the process running  under  xterm  (usually  the
                     shell).

       The  vtMenu sets various modes in the VT102 emulation, and is popped up
       when the ‘‘control’’ key and pointer button  two  are  pressed  in  the
       VT102 window.

       VT102/VT220 Modes:

              Enable Scrollbar (scrollbar)
                     Enable  (or  disable) the scrollbar.  This corresponds to
                     the -sb option and the scrollBar resource.

              Enable Jump Scroll (jumpscroll)
                     Enable (or disable) jump scrolling.  This corresponds  to
                     the -j option and the jumpScroll resource.

              Enable Reverse Video (reversevideo)
                     Enable  (or  disable) reverse-video.  This corresponds to
                     the -rv option and the reverseVideo resource.

              Enable Auto Wraparound (autowrap)
                     Enable (or disable) auto-wraparound.  This corresponds to
                     the -aw option and the autoWrap resource.

              Enable Reverse Wraparound (reversewrap)
                     Enable (or disable) reverse wraparound.  This corresponds
                     to the -rw option and the reverseWrap resource.

              Enable Auto Linefeed (autolinefeed)
                     Enable (or disable) auto-linefeed.  This is the VT102 NEL
                     function,  which  causes  the emulator to emit a linefeed
                     after each carriage return.  There  is  no  corresponding
                     command-line option or resource setting.

              Enable Application Cursor Keys (appcursor)
                     Enable   (or  disable)  application  cursor  keys.   This
                     corresponds to the appcursorDefault resource.   There  is
                     no corresponding command-line option.

              Enable Application Keypad (appkeypad)
                     Enable   (or  disable)  application  keypad  keys.   This
                     corresponds to the appkeypadDefault resource.   There  is
                     no corresponding command-line option.

              Scroll to Bottom on Key Press (scrollkey)
                     Enable  (or  disable)  scrolling  to  the  bottom  of the
                     scrolling region on a keypress.  This corresponds to  the
                     -sk option and the scrollKey resource.

              Scroll to Bottom on Tty Output (scrollttyoutput)
                     Enable  (or  disable)  scrolling  to  the  bottom  of the
                     scrolling  region  on  output  to  the  terminal..   This
                     corresponds  to  the  -si  option and the scrollTtyOutput
                     resource.

              Allow 80/132 Column Switching (allow132)
                     Enable (or disable) switching between 80 and 132 columns.
                     This   corresponds  to  the  -132  option  and  the  c132
                     resource.

              Enable Curses Emulation (cursesemul)
                     Enable  (or  disable)  a  workaround  for  the  so-called
                     "curses bug".  This corresponds to the -cu option and the
                     curses resource.

              Enable Visual Bell (visualbell)
                     Enable (or disable) visible bell (i.e., flashing) instead
                     of  an  audible bell.  This corresponds to the -vb option
                     and the visualBell resource.

              Enable Pop on Bell (poponbell)
                     Enable (or disable) raising of the window when  Control-G
                     is received.  This corresponds to the -pop option and the
                     popOnBell resource.

              Enable Margin Bell (marginbell)
                     Enable (or disable) a bell when the user types  near  the
                     right margin.  This corresponds to the -mb option and the
                     marginBell resource.

              Enable Blinking Cursor (cursorblink)
                     Enable (or disable) the  blinking-cursor  feature.   This
                     corresponds   to  the  -bc  option  and  the  cursorBlink
                     resource.  There is also  an  escape  sequence  (see  the
                     document  Xterm  Control  Sequences).  The menu entry and
                     the  escape  sequence  states  are  XOR’d:  if  both  are
                     enabled,  the  cursor  will  not  blink,  if  only one is
                     enabled, the cursor will blink.

              Enable Alternate Screen Switching (titeInhibit)
                     Enable (or disable)  switching  between  the  normal  and
                     alternate  screens.   This corresponds to the titeInhibit
                     resource.  There is no corresponding command-line option.

              Enable Active Icon (activeicon)
                     Enable   (or  disable)  the  active-icon  feature.   This
                     corresponds  to  the  -ai  option  and   the   activeIcon
                     resource.

       VT102/VT220 Commands:

              Do Soft Reset (softreset)
                     Reset  scroll  regions.  This can be convenient when some
                     program has  left  the  scroll  regions  set  incorrectly
                     (often  a  problem  when  using  VMS  or  TOPS-20).  This
                     corresponds to the VT220 DECSTR control sequence.

              Do Full Reset (hardreset)
                     The full reset entry will clear the screen, reset tabs to
                     every  eight  columns, and reset the terminal modes (such
                     as wrap and smooth scroll) to their initial  states  just
                     after  xterm  has  finished  processing  the command line
                     options.  This  corresponds  to  the  VT102  RIS  control
                     sequence,  with  a few obvious differences.  For example,
                     your session is not disconnected as a  real  VT102  would
                     do.

              Reset and Clear Saved Lines (clearsavedlines)
                     Perform a full reset, and also clear the saved lines.

       Commands for setting the current screen:

              Show Tek Window (tekshow)
                     When enabled, pops the Tektronix 4014 window up (makes it
                     visible).   When  disabled,  hides  the  Tektronix   4014
                     window.

              Switch to Tek Mode (tekmode)
                     When  enabled, pops the Tektronix 4014 window up if it is
                     not already visible, and switches  the  input  stream  to
                     that  window.   When  disabled,  hides the Tektronix 4014
                     window and switches input back to the VTxxx window.

              Hide VT Window (vthide)
                     When enabled, hides the VTxxx window, shows the Tektronix
                     4014  window  if  it was not already visible and switches
                     the input stream to that window.   When  disabled,  shows
                     the  VTxxx  window, and switches the input stream to that
                     window.

              Show Alternate Screen (altscreen)
                     When enabled, shows the alternate screen.  When disabled,
                     shows the normal screen.  Note that the normal screen may
                     have saved lines; the alternate screen does not.

       The fontMenu sets the font used in the VT102 window,  or  modifies  the
       way the font is specified or displayed.  There are three sections.

       The  first  section  allows  you  to  select  the  font  from  a set of
       alternatives:

              Default (fontdefault)
                     Set the font to the default,  i.e.,  that  given  by  the
                     *VT100.font resource.

              Unreadable (font1)
                     Set  the font to that given by the *VT100.font1 resource.

              Tiny (font2)
                     Set the font to that given by the *VT100.font2  resource.

              Small (font3)
                     Set  the font to that given by the *VT100.font3 resource.

              Medium (font4)
                     Set the font to that given by the *VT100.font4  resource.

              Large (font5)
                     Set  the font to that given by the *VT100.font5 resource.

              Huge (font6)
                     Set the font to that given by the *VT100.font6  resource.

              Escape Sequence
                     This allows you to set the font last specified by the Set
                     Font escape sequence  (see  the  document  Xterm  Control
                     Sequences).

              Selection (fontsel)
                     This  allows  you  to  set the font specified the current
                     selection as a font name (if  the  PRIMARY  selection  is
                     owned).

       The second section allows you to modify the way it is displayed:

              Line-Drawing Characters (font-linedrawing)
                     When  set,  tells  xterm  to  draw  its  own line-drawing
                     characters.  Otherwise it relies on the  font  containing
                     these.

              Doublesized Characters (font-doublesize)
                     When set, xterm may ask the font server to produce scaled
                     versions  of  the  normal  font,  for  VT102  double-size
                     characters.

       The third section allows you to modify the way it is specified:

              TrueType Fonts (render-font)
                     If  the  renderFont and corresponding resources were set,
                     this is a further control whether xterm will actually use
                     the Xft library calls to obtain a font.

              UTF-8 (utf8-mode)
                     This  controls  whether  xterm  uses  UTF-8  encoding  of
                     input/output.  It is  useful  for  temporarily  switching
                     xterm  to display text from an application which does not
                     follow the locale settings.

       The tekMenu sets various modes  in  the  Tektronix  emulation,  and  is
       popped  up  when the ‘‘control’’ key and pointer button two are pressed
       in the Tektronix window.  The current font size is checked in the modes
       section of the menu.

              Large Characters (tektextlarge)

              #2 Size Characters (tektext2)

              #3 Size Characters (tektext3)

              Small Characters (tektextsmall)

       Commands:

              PAGE (tekpage)
                     Clear the Tektronix window.

              RESET (tekreset)

              COPY (tekcopy)

       Windows:

              Show VT Window (vtshow)

              Switch to VT Mode (vtmode)

              Hide Tek Window (tekhide)

SECURITY

       X  environments  differ in their security consciousness.  Most servers,
       run under xdm, are capable of using a  ‘‘magic  cookie’’  authorization
       scheme that can provide a reasonable level of security for many people.
       If your server is only using a host-based mechanism to  control  access
       to  the server (see xhost(1)), then if you enable access for a host and
       other users are also permitted to run clients on that same host, it  is
       possible  that  someone  can  run  an  application which uses the basic
       services of the X protocol to snoop  on  your  activities,  potentially
       capturing  a  transcript  of  everything you type at the keyboard.  Any
       process which has access to your X display can manipulate  it  in  ways
       that you might not anticipate, even redirecting your keyboard to itself
       and sending events to your application’s windows.  This  is  true  even
       with   the   ‘‘magic   cookie’’   authorization   scheme.    While  the
       allowSendEvents provides some  protection  against  rogue  applications
       tampering with your programs, guarding against a snooper is harder.

       The  possibility  of  an  application  spying  on your keystrokes is of
       particular concern when you  want  to  type  in  a  password  or  other
       sensitive  data.   The best solution to this problem is to use a better
       authorization mechanism than is provided by  X.   Given  all  of  these
       caveats,  a  simple  mechanism  exists for protecting keyboard input in
       xterm.

       The xterm menu (see MENUS  above)  contains  a  Secure  Keyboard  entry
       which,  when  enabled,  attempts  to  ensure that all keyboard input is
       directed only to xterm (using the GrabKeyboard protocol request).  When
       an  application  prompts  you for a password (or other sensitive data),
       you can enable Secure Keyboard using the menu, type in  the  data,  and
       then  disable  Secure Keyboard using the menu again.  This ensures that
       you know which window is accepting your keystrokes.  It  cannot  ensure
       that  there  are  no processes which have access to your X display that
       might be observing the keystrokes as well.

       Only one X client at a time can grab the keyboard, so when you  attempt
       to  enable  Secure  Keyboard  it may fail.  In this case, the bell will
       sound.  If the Secure Keyboard succeeds, the foreground and  background
       colors will be exchanged (as if you selected the Reverse Video entry in
       the Modes menu); they will be exchanged  again  when  you  exit  secure
       mode.   If the colors do not switch, then you should be very suspicious
       that you are  being  spoofed.   If  the  application  you  are  running
       displays a prompt before asking for the password, it is safest to enter
       secure mode before the prompt gets displayed, and to make sure that the
       prompt  gets  displayed  correctly (in the new colors), to minimize the
       probability of spoofing.  You can also bring up the menu again and make
       sure that a check mark appears next to the entry.

       Secure  Keyboard  mode  will  be  disabled  automatically if your xterm
       window becomes iconified (or otherwise unmapped), or if you start up  a
       reparenting window manager (that places a title bar or other decoration
       around the window) while in Secure Keyboard mode.  (This is  a  feature
       of  the  X  protocol  not  easily  overcome.)   When  this happens, the
       foreground and background colors will be switched  back  and  the  bell
       will sound in warning.

CHARACTER CLASSES

       Clicking the left mouse button twice in rapid succession will cause all
       characters of the same class (e.g., letters, white space,  punctuation)
       to  be selected.  Since different people have different preferences for
       what should be selected (for example, should filenames be selected as a
       whole  or  only  the  separate  subnames),  the  default mapping can be
       overridden through the use of the charClass (class CharClass) resource.

       This resource is a series of comma-separated of range:value pairs.  The
       range is either a single number or low-high in the range of 0 to 65535,
       corresponding  to  the  code for the character or characters to be set.
       The value is arbitrary, although the default table uses  the  character
       number  of the first character occurring in the set.  When not in UTF-8
       mode, only the first 256 bytes of this table will be used.

       The default table starts as follows -

           static int charClass[256] = {
           /∗ NUL  SOH  STX  ETX  EOT  ENQ  ACK  BEL */
               32,   1,   1,   1,   1,   1,   1,   1,
           /∗  BS   HT   NL   VT   NP   CR   SO   SI */
                1,  32,   1,   1,   1,   1,   1,   1,
           /∗ DLE  DC1  DC2  DC3  DC4  NAK  SYN  ETB */
                1,   1,   1,   1,   1,   1,   1,   1,
           /∗ CAN   EM  SUB  ESC   FS   GS   RS   US */
                1,   1,   1,   1,   1,   1,   1,   1,
           /∗  SP    !    "    #    $    %    &    ’ */
               32,  33,  34,  35,  36,  37,  38,  39,
           /∗   (    )    *    +    ,    -    .    / */
               40,  41,  42,  43,  44,  45,  46,  47,
           /∗   0    1    2    3    4    5    6    7 */
               48,  48,  48,  48,  48,  48,  48,  48,
           /∗   8    9    :    ;    <    =    >    ? */
               48,  48,  58,  59,  60,  61,  62,  63,
           /∗   @    A    B    C    D    E    F    G */
               64,  48,  48,  48,  48,  48,  48,  48,
           /∗   H    I    J    K    L    M    N    O */
               48,  48,  48,  48,  48,  48,  48,  48,
           /∗   P    Q    R    S    T    U    V    W */
               48,  48,  48,  48,  48,  48,  48,  48,
           /∗   X    Y    Z    [    \    ]    ^    _ */
               48,  48,  48,  91,  92,  93,  94,  48,
           /∗   ‘    a    b    c    d    e    f    g */
               96,  48,  48,  48,  48,  48,  48,  48,
           /∗   h    i    j    k    l    m    n    o */
               48,  48,  48,  48,  48,  48,  48,  48,
           /∗   p    q    r    s    t    u    v    w */
               48,  48,  48,  48,  48,  48,  48,  48,
           /∗   x    y    z    {    |    }    ~  DEL */
               48,  48,  48, 123, 124, 125, 126,   1,
           /∗ x80  x81  x82  x83  IND  NEL  SSA  ESA */
                1,   1,   1,   1,   1,   1,   1,   1,
           /∗ HTS  HTJ  VTS  PLD  PLU   RI  SS2  SS3 */
                1,   1,   1,   1,   1,   1,   1,   1,
           /∗ DCS  PU1  PU2  STS  CCH   MW  SPA  EPA */
                1,   1,   1,   1,   1,   1,   1,   1,
           /∗ x98  x99  x9A  CSI   ST  OSC   PM  APC */
                1,   1,   1,   1,   1,   1,   1,   1,
           /∗   -    i   c/    L   ox   Y-    |   So */
              160, 161, 162, 163, 164, 165, 166, 167,
           /∗  ..   c0   ip   <<    _        R0    - */
              168, 169, 170, 171, 172, 173, 174, 175,
           /∗   o   +-    2    3    ’    u   q|    . */
              176, 177, 178, 179, 180, 181, 182, 183,
           /∗   ,    1    2   >>  1/4  1/2  3/4    ? */
              184, 185, 186, 187, 188, 189, 190, 191,
           /∗  A‘   A’   A^   A~   A:   Ao   AE   C, */
               48,  48,  48,  48,  48,  48,  48,  48,
           /∗  E‘   E’   E^   E:   I‘   I’   I^   I: */
               48,  48,  48,  48,  48,  48,  48,  48,
           /∗  D-   N~   O‘   O’   O^   O~   O:    X */
               48,  48,  48,  48,  48,  48,  48, 215,
           /∗  O/   U‘   U’   U^   U:   Y’    P    B */
               48,  48,  48,  48,  48,  48,  48,  48,
           /∗  a‘   a’   a^   a~   a:   ao   ae   c, */
               48,  48,  48,  48,  48,  48,  48,  48,
           /∗  e‘   e’   e^   e:    i‘  i’   i^   i: */
               48,  48,  48,  48,  48,  48,  48,  48,
           /∗   d   n~   o‘   o’   o^   o~   o:   -: */
               48,  48,  48,  48,  48,  48,  48, 247,
           /∗  o/   u‘   u’   u^   u:   y’    P   y: */
               48,  48,  48,  48,  48,  48,  48,  48};

       For example, the string ‘‘33:48,37:48,45-47:48,38:48’’  indicates  that
       the  exclamation mark, percent sign, dash, period, slash, and ampersand
       characters should be treated the same way as  characters  and  numbers.
       This is useful for cutting and pasting electronic mailing addresses and
       filenames.

ACTIONS

       It is possible to rebind keys  (or  sequences  of  keys)  to  arbitrary
       strings for input, by changing the translations resources for the vt100
       or tek4014 widgets.  Changing  the  translations  resource  for  events
       other  than  key  and  button  events  is  not expected, and will cause
       unpredictable behavior.  The following actions  are  provided  for  use
       within the vt100 or tek4014 translations resources:

       allow-send-events(on/off/toggle)
               This  action set or toggles the allowSendEvents resource and is
               also invoked by the allowsends entry in mainMenu.

       alt-sends-escape()
               This action toggles the state of the eightBitInput resource.

       bell([percent])
               This action rings the keyboard bell at the specified percentage
               above or below the base volume.

       clear-saved-lines()
               This  action  does hard-reset() (see below) and also clears the
               history of lines saved off the top of the screen.  It  is  also
               invoked  from  the clearsavedlines entry in vtMenu.  The effect
               is identical to a hardware reset (RIS) control sequence.

       create-menu(m/v/f/t)
               This action creates one of the menus used by xterm, if  it  has
               not been previously created.  The parameter values are the menu
               names: mainMenu, vtMenu, fontMenu, tekMenu, respectively.

       dabbrev-expand()
               Expands the word before cursor by searching  in  the  preceding
               text  on  the  screen  and  in  the scrollback buffer for words
               starting with that  abbreviation.   Repeating  dabbrev-expand()
               several times in sequence searches for an alternative expansion
               by looking farther back.  Lack of more matches is signaled by a
               beep().  Attempts to expand an empty word (i.e., when cursor is
               preceded by a space) yield  successively  all  previous  words.
               Consecutive identical expansions are ignored.  The word here is
               defined as  a  sequence  of  non-whitespace  characters.   This
               feature   partially   emulates   the   behavior   of   ‘dynamic
               abbreviation’ expansion in Emacs (bound there to M-/).  Here is
               a resource setting for xterm which will do the same thing:

                   *VT100*translations:    #override \n\
                        Meta <KeyPress> /:dabbrev-expand()

       deiconify()
               Changes the window state back to normal, if it was iconified.

       delete-is-del()
               This action toggles the state of the deleteIsDEL resource.

       dired-button()
               Handles  a  button  event  (other  than  press  and release) by
               echoing the event’s position (i.e., character line and  column)
               in the following format:

                       ^X ESC G <line+’ ’> <col+’ ’>

       iconify()
               Iconifies the window.

       hard-reset()
               This action resets the scrolling region, tabs, window size, and
               cursor keys and clears the screen.  It is also invoked from the
               hardreset entry in vtMenu.

       ignore()
               This  action  ignores  the event but checks for special pointer
               position escape sequences.

       insert()
               This action inserts the character or string associated with the
               key that was pressed.

       insert-eight-bit()
               This   action  inserts  an  eight-bit  (Meta)  version  of  the
               character or string associated with the key that  was  pressed.
               This  only  applies  to  single-byte  values.  The exact action
               depends  on  the  value  of   the   metaSendsEscape   and   the
               eightBitInput   resources.   The  metaSendsEscape  resource  is
               tested first.

               The term "eight-bit" is misleading: xterm checks if  the  key’s
               value  is  less  than 128.  If so, xterm adds 128 to the value,
               setting its eighth bit.  Otherwise  xterm  sends  an  ESC  byte
               before  the key.  In other applications’ documentation, that is
               referred to as a "meta key".

       insert-selection(sourcename [, ...])
               This action inserts  the  string  found  in  the  selection  or
               cutbuffer  indicated by sourcename.  Sources are checked in the
               order  given  (case  is  significant)  until  one   is   found.
               Commonly-used   selections  include:  PRIMARY,  SECONDARY,  and
               CLIPBOARD.  Cut buffers are typically named CUT_BUFFER0 through
               CUT_BUFFER7.

       insert-seven-bit()
               This  action  is a synonym for insert() The term "seven-bit" is
               misleading: it only implies that xterm does not try to add  128
               to the key’s value as in insert-eight-bit().

       interpret(control-sequence)
               Interpret  the  given  control  sequence locally, i.e., without
               passing it to the host.  This works by  inserting  the  control
               sequence  at  the front of the input buffer.  Use "\" to escape
               octal digits in the string.  Xt does not allow  you  to  put  a
               null character (i.e., "\000") in the string.

       keymap(name)
               This  action  dynamically defines a new translation table whose
               resource  name  is  name  with  the  suffix  Keymap  (case   is
               significant).   The name None restores the original translation
               table.

       larger-vt-font()
               Set the font  to  the  next  larger  one,  based  on  the  font
               dimensions.  See also set-vt-font().

       load-vt-fonts(name[,class])
               Load fontnames from the given subresource name and class.  That
               is, load the "*VT100.name.font", resource as "*VT100.font" etc.
               If no name is given, the original set of fontnames is restored.

               Unlike set-vt-font(), this does  not  affect  the  escape-  and
               select-fonts, since those are not based on resource values.  It
               does affect the fonts loosely organized under  the  ‘‘Default’’
               menu entry: font, boldFont, wideFont and wideBoldFont.

       maximize()
               Resizes the window to fill the screen.

       meta-sends-escape()
               This  action toggles the state of the metaSendsEscape resource.

       popup-menu(menuname)
               This action displays the specified  popup  menu.   Valid  names
               (case is significant) include:  mainMenu, vtMenu, fontMenu, and
               tekMenu.

       print() This action prints the window and is also invoked by the  print
               entry in mainMenu.

       print-redir()
               This  action  toggles  the  printerControlMode between 0 and 2.
               The corresponding popup menu entry is useful for switching  the
               printer off if you happen to change your mind after deciding to
               print random binary files on the terminal.

       quit()  This action sends a SIGHUP to the subprogram and exits.  It  is
               also invoked by the quit entry in mainMenu.

       redraw()
               This  action  redraws  the  window  and  is also invoked by the
               redraw entry in mainMenu.

       restore()
               Restores the window to the size before it was last maximized.

       scroll-back(count [,units [,mouse] ])
               This action scrolls the text window backward so that text  that
               had  previously  scrolled  off  the  top  of  the screen is now
               visible.

               The count argument indicates the number of units (which may  be
               page, halfpage, pixel, or line) by which to scroll.

               An  adjustment can be specified for these values by appending a
               "+" or "-" sign followed by a number, e.g., page-2 to specify 2
               lines less than a page.

               If  the  third  parameter mouse is given, the action is ignored
               when mouse reporting is enabled.

       scroll-forw(count [,units [,mouse] ])
               This action is similar to scroll-back except that it scrolls in
               the other direction.

       secure()
               This  action  toggles the Secure Keyboard mode described in the
               section named SECURITY, and is invoked from the securekbd entry
               in mainMenu.

       select-cursor-end(destname [, ...])
               This  action  is similar to select-end except that it should be
               used with select-cursor-start.

       select-cursor-start()
               This action is similar to select-start except  that  it  begins
               the selection at the current text cursor position.

       select-end(destname [, ...])
               This  action  puts  the currently selected text into all of the
               selections or cutbuffers specified by destname.

       select-extend()
               This action tracks the pointer and extends the  selection.   It
               should only be bound to Motion events.

       select-set()
               This  action  stores  text  that  corresponds  to  the  current
               selection, without affecting the selection mode.

       select-start()
               This action  begins  text  selection  at  the  current  pointer
               location.   See the section on POINTER USAGE for information on
               making selections.

       send-signal(signame)
               This action sends the signal named  by  signame  to  the  xterm
               subprocess  (the shell or program specified with the -e command
               line option) and is also  invoked  by  the  suspend,  continue,
               interrupt,  hangup,  terminate,  and  kill entries in mainMenu.
               Allowable signal names are (case is not significant): tstp  (if
               supported  by  the  operating  system), suspend (same as tstp),
               cont (if supported by the operating system),  int,  hup,  term,
               quit, alrm, alarm (same as alrm) and kill.

       set-allow132(on/off/toggle)
               This  action toggles the c132 resource and is also invoked from
               the allow132 entry in vtMenu.

       set-altscreen(on/off/toggle)
               This action toggles between the alternate and current  screens.

       set-appcursor(on/off/toggle)
               This  action  toggles  the handling Application Cursor Key mode
               and is also invoked by the appcursor entry in vtMenu.

       set-appkeypad(on/off/toggle)
               This action toggles the handling of Application Keypad mode and
               is also invoked by the appkeypad entry in vtMenu.

       set-autolinefeed(on/off/toggle)
               This  action  toggles  automatic  insertion of linefeeds and is
               also invoked by the autolinefeed entry in vtMenu.

       set-autowrap(on/off/toggle)
               This action toggles automatic wrapping of  long  lines  and  is
               also invoked by the autowrap entry in vtMenu.

       set-backarrow(on/off/toggle)
               This  action  toggles  the  backarrowKey  resource  and is also
               invoked from the backarrow key entry in vtMenu.

       set-cursorblink(on/off/toggle)
               This action  toggles  the  cursorBlink  resource  and  is  also
               invoked from the cursorblink entry in vtMenu.

       set-cursesemul(on/off/toggle)
               This  action  toggles  the  curses resource and is also invoked
               from the cursesemul entry in vtMenu.

       set-font-doublesize(on/off/toggle)
               This action toggles the fontDoublesize  resource  and  is  also
               invoked by the font-doublesize entry in fontMenu.

       set-hp-function-keys(on/off/toggle)
               This  action  toggles  the  hpFunctionKeys resource and is also
               invoked by the hpFunctionKeys entry in mainMenu.

       set-jumpscroll(on/off/toggle)
               This action toggles the jumpscroll resource and is also invoked
               by the jumpscroll entry in vtMenu.

       set-font-linedrawing(on/off/toggle)
               This  action  toggles  the  xterm’s state regarding whether the
               current font has line-drawing characters and whether it  should
               draw them directly.  It is also invoked by the font-linedrawing
               entry in fontMenu.

       set-logging()
               This action toggles the state of the logging option.

       set-old-function-keys(on/off/toggle)
               This action toggles the state of legacy function  keys  and  is
               also invoked by the oldFunctionKeys entry in mainMenu.

       set-marginbell(on/off/toggle)
               This action toggles the marginBell resource and is also invoked
               from the marginbell entry in vtMenu.

       set-num-lock()
               This action toggles the state of the numLock resource.

       set-pop-on-bell(on/off/toggle)
               This action toggles the popOnBell resource and is also  invoked
               by the poponbell entry in vtMenu.

       set-render-font(on/off/toggle)
               This action toggles the renderFont resource and is also invoked
               by the render-font entry in fontMenu.

       set-reverse-video(on/off/toggle)
               This action toggles  the  reverseVideo  resource  and  is  also
               invoked by the reversevideo entry in vtMenu.

       set-reversewrap(on/off/toggle)
               This  action  toggles  the  reverseWrap  resource  and  is also
               invoked by the reversewrap entry in vtMenu.

       set-scroll-on-key(on/off/toggle)
               This action toggles the scrollKey resource and is also  invoked
               from the scrollkey entry in vtMenu.

       set-scroll-on-tty-output(on/off/toggle)
               This  action  toggles  the scrollTtyOutput resource and is also
               invoked from the scrollttyoutput entry in vtMenu.

       set-scrollbar(on/off/toggle)
               This action toggles the scrollbar resource and is also  invoked
               by the scrollbar entry in vtMenu.

       set-sco-function-keys(on/off/toggle)
               This  action  toggles  the scoFunctionKeys resource and is also
               invoked by the scoFunctionKeys entry in mainMenu.

       set-sun-function-keys(on/off/toggle)
               This action toggles the sunFunctionKeys resource  and  is  also
               invoked by the sunFunctionKeys entry in mainMenu.

       set-sun-keyboard(on/off/toggle)
               This  action  toggles  the  sunKeyboard  resource  and  is also
               invoked by the sunKeyboard entry in mainMenu.

       set-tek-text(large/2/3/small)
               This action sets font used in the Tektronix window to the value
               of   the   resources   tektextlarge,  tektext2,  tektext3,  and
               tektextsmall according to the argument.   It  is  also  by  the
               entries of the same names as the resources in tekMenu.

       set-terminal-type(type)
               This  action  directs  output  to either the vt or tek windows,
               according to the type  string.   It  is  also  invoked  by  the
               tekmode entry in vtMenu and the vtmode entry in tekMenu.

       set-titeInhibit(on/off/toggle)
               This  action  toggles  the titeInhibit resource, which controls
               switching between the alternate and current screens.

       set-toolbar(on/off/toggle)
               This action toggles the toolbar feature and is also invoked  by
               the toolbar entry in mainMenu.

       set-utf8-mode(on/off/toggle)
               This  action  toggles  the utf8 resource and is also invoked by
               the utf8-mode entry in fontMenu.

       set-visibility(vt/tek,on/off/toggle)
               This action controls whether or not the vt or tek  windows  are
               visible.   It  is  also  invoked  from  the  tekshow and vthide
               entries in  vtMenu  and  the  vtshow  and  tekhide  entries  in
               tekMenu.

       set-visual-bell(on/off/toggle)
               This action toggles the visualBell resource and is also invoked
               by the visualbell entry in vtMenu.

       set-vt-font(d/1/2/3/4/5/6/e/s [,normalfont [, boldfont]])
               This action sets the font or fonts currently being used in  the
               VT102  window.   The  first argument is a single character that
               specifies the font to be used:

               d or D indicate the default font (the font initially used  when
                      xterm was started),

               1  through  6 indicate the fonts specified by the font1 through
                      font6 resources,

               e or E indicate the normal and bold fonts that  have  been  set
                      through  escape  codes  (or  specified as the second and
                      third action arguments, respectively), and

               s or S indicate the font selection (as made by programs such as
                      xfontsel(1)) indicated by the second action argument.

               If   xterm   is  configured  to  support  wide  characters,  an
               additional two optional parameters are  recognized  for  the  e
               argument: wide font and wide bold font.

       smaller-vt-font()
               Set  the  font  to  the  next  smaller  one,  based on the font
               dimensions.  See also set-vt-font().

       soft-reset()
               This action resets the scrolling region  and  is  also  invoked
               from the softreset entry in vtMenu.  The effect is identical to
               a soft reset (DECSTR) control sequence.

       start-extend()
               This  action  is  similar  to  select-start  except  that   the
               selection is extended to the current pointer location.

       start-cursor-extend()
               This  action  is  similar  to  select-extend  except  that  the
               selection is extended to the current text cursor position.

       string(string)
               This action inserts the specified text string as if it had been
               typed.    Quotation   is   necessary  if  the  string  contains
               whitespace  or  non-alphanumeric  characters.   If  the  string
               argument  begins  with the characters ‘‘0x’’, it is interpreted
               as a hex character constant.

       tek-copy()
               This action copies  the  escape  codes  used  to  generate  the
               current  window  contents  to  a  file in the current directory
               beginning with the name COPY.  It  is  also  invoked  from  the
               tekcopy entry in tekMenu.

       tek-page()
               This  action clears the Tektronix window and is also invoked by
               the tekpage entry in tekMenu.

       tek-reset()
               This action resets the Tektronix window and is also invoked  by
               the tekreset entry in tekMenu.

       vi-button()
               Handles  a  button  event  (other  than  press  and release) by
               echoing a control  sequence  computed  from  the  event’s  line
               number in the screen relative to the current line:

                       ESC ^P
               or
                       ESC ^N

               according  to whether the event is before, or after the current
               line, respectively.  The ^N (or ^P) is repeated once  for  each
               line that the event differs from the current line.  The control
               sequence is omitted altogether if the button event  is  on  the
               current line.

       visual-bell()
               This action flashes the window quickly.

       The Tektronix window also has the following action:

       gin-press(l/L/m/M/r/R)
               This action sends the indicated graphics input code.

       The default bindings in the VT102 window are:

                     Shift <KeyPress> Prior:scroll-back(1,halfpage) \n\
                      Shift <KeyPress> Next:scroll-forw(1,halfpage) \n\
                    Shift <KeyPress> Select:select-cursor-start() \
                                            select-cursor-end(PRIMARY, CUT_BUFFER0) \n\
                    Shift <KeyPress> Insert:insert-selection(PRIMARY, CUT_BUFFER0) \n\
               Shift~Ctrl <KeyPress> KP_Add:larger-vt-font() \n\
               Shift Ctrl <KeyPress> KP_Add:smaller-vt-font() \n\
               Shift <KeyPress> KP_Subtract:smaller-vt-font() \n\
                           ~Meta <KeyPress>:insert-seven-bit() \n\
                            Meta <KeyPress>:insert-eight-bit() \n\
                           !Ctrl <Btn1Down>:popup-menu(mainMenu) \n\
                      !Lock Ctrl <Btn1Down>:popup-menu(mainMenu) \n\
            !Lock Ctrl @Num_Lock <Btn1Down>:popup-menu(mainMenu) \n\
                ! @Num_Lock Ctrl <Btn1Down>:popup-menu(mainMenu) \n\
                           ~Meta <Btn1Down>:select-start() \n\
                         ~Meta <Btn1Motion>:select-extend() \n\
                           !Ctrl <Btn2Down>:popup-menu(vtMenu) \n\
                      !Lock Ctrl <Btn2Down>:popup-menu(vtMenu) \n\
            !Lock Ctrl @Num_Lock <Btn2Down>:popup-menu(vtMenu) \n\
                ! @Num_Lock Ctrl <Btn2Down>:popup-menu(vtMenu) \n\
                     ~Ctrl ~Meta <Btn2Down>:ignore() \n\
                            Meta <Btn2Down>:clear-saved-lines() \n\
                       ~Ctrl ~Meta <Btn2Up>:insert-selection(PRIMARY, CUT_BUFFER0) \n\
                           !Ctrl <Btn3Down>:popup-menu(fontMenu) \n\
                      !Lock Ctrl <Btn3Down>:popup-menu(fontMenu) \n\
            !Lock Ctrl @Num_Lock <Btn3Down>:popup-menu(fontMenu) \n\
                ! @Num_Lock Ctrl <Btn3Down>:popup-menu(fontMenu) \n\
                     ~Ctrl ~Meta <Btn3Down>:start-extend() \n\
                         ~Meta <Btn3Motion>:select-extend() \n\
                            Ctrl <Btn4Down>:scroll-back(1,halfpage,m) \n\
                       Lock Ctrl <Btn4Down>:scroll-back(1,halfpage,m) \n\
             Lock @Num_Lock Ctrl <Btn4Down>:scroll-back(1,halfpage,m) \n\
                  @Num_Lock Ctrl <Btn4Down>:scroll-back(1,halfpage,m) \n\
                                 <Btn4Down>:scroll-back(5,line,m)     \n\
                            Ctrl <Btn5Down>:scroll-forw(1,halfpage,m) \n\
                       Lock Ctrl <Btn5Down>:scroll-forw(1,halfpage,m) \n\
             Lock @Num_Lock Ctrl <Btn5Down>:scroll-forw(1,halfpage,m) \n\
                  @Num_Lock Ctrl <Btn5Down>:scroll-forw(1,halfpage,m) \n\
                                 <Btn5Down>:scroll-forw(5,line,m)     \n\
                                    <BtnUp>:select-end(PRIMARY, CUT_BUFFER0) \n\
                                  <BtnDown>:ignore()

       The default bindings in the Tektronix window are:

                           ~Meta<KeyPress>: insert-seven-bit() \n\
                            Meta<KeyPress>: insert-eight-bit() \n\
                          !Ctrl <Btn1Down>: popup-menu(mainMenu) \n\
                     !Lock Ctrl <Btn1Down>: popup-menu(mainMenu) \n\
           !Lock Ctrl @Num_Lock <Btn1Down>:popup-menu(mainMenu) \n\
                !Ctrl @Num_Lock <Btn1Down>:popup-menu(mainMenu) \n\
                          !Ctrl <Btn2Down>: popup-menu(tekMenu) \n\
                     !Lock Ctrl <Btn2Down>: popup-menu(tekMenu) \n\
           !Lock Ctrl @Num_Lock <Btn2Down>:popup-menu(tekMenu) \n\
                !Ctrl @Num_Lock <Btn2Down>:popup-menu(tekMenu) \n\
                     Shift ~Meta<Btn1Down>:gin-press(L) \n\
                           ~Meta<Btn1Down>:gin-press(l) \n\
                     Shift ~Meta<Btn2Down>:gin-press(M) \n\
                           ~Meta<Btn2Down>:gin-press(m) \n\
                     Shift ~Meta<Btn3Down>:gin-press(R) \n\
                           ~Meta<Btn3Down>:gin-press(r)

       Here  is  an  example  which  uses  shifted select/paste to copy to the
       clipboard, and unshifted select/paste for the  primary  selection.   In
       each  case,  a (different) cut buffer is also a target or source of the
       select/paste operation.  It is important to remember however, that  cut
       buffers  store  data in ISO-8859-1 encoding, while selections can store
       data in a variety of formats  and  encodings.   While  xterm  owns  the
       selection,  it  highlights it.  When it loses the selection, it removes
       the  corresponding  highlight.   But  you  can  still  paste  from  the
       corresponding cut buffer.

           *VT100*translations:    #override \n\
               ~Shift~Ctrl<Btn2Up>: insert-selection(PRIMARY, CUT_BUFFER0) \n\
               Shift~Ctrl<Btn2Up>:  insert-selection(CLIPBOARD, CUT_BUFFER1) \n\
               ~Shift<BtnUp>:       select-end(PRIMARY, CUT_BUFFER0) \n\
               Shift<BtnUp>:        select-end(CLIPBOARD, CUT_BUFFER1)

       Below  is  a  sample  how of the keymap() action is used to add special
       keys for entering commonly-typed works:

           *VT100.Translations: #override <Key>F13: keymap(dbx)
           *VT100.dbxKeymap.translations: \
                <Key>F14: keymap(None) \n\
                <Key>F17: string("next") string(0x0d) \n\
                <Key>F18: string("step") string(0x0d) \n\
                <Key>F19: string("continue") string(0x0d) \n\
                <Key>F20: string("print ") insert-selection(PRIMARY, CUT_BUFFER0)

CONTROL SEQUENCES AND KEYBOARD

       The Xterm Control Sequences document lists the control sequences  which
       an  application  can  send xterm to make it perform various operations.
       Most of these operations are  standardized,  from  either  the  DEC  or
       Tektronix  terminals,  or  from  more widely used standards such as ISO
       6429.

ENVIRONMENT

       Xterm sets several environment variables:

       DISPLAY
            is the display name, pointing to the X server (see  DISPLAY  NAMES
            in X(1)).

       TERM is  set  according  to the termcap (or terminfo) entry which it is
            using as a reference.

       WINDOWID
            is set to the X window id number of the xterm window.

       XTERM_SHELL
            is set to the pathname of the program which is  invoked.   Usually
            that  is  a  shell  program,  e.g.,  /bin/sh.   Since  it  is  not
            necessarily  a  shell  program  however,  it  is   distinct   from
            ‘‘SHELL’’.

       XTERM_VERSION
            is  set  to  the string displayed by the -version option.  That is
            normally an identifier for the X Window libraries  used  to  build
            xterm, followed by xterm’s patch number in parenthesis.  The patch
            number is  also  part  of  the  response  to  a  Secondary  Device
            Attributes (DA) control sequence (see Xterm Control Sequences).

       Depending  on  your  system  configuration,  xterm  may  also  set  the
       following:

       COLUMNS
            the width of the xterm in characters (cf: "stty columns").

       HOME when xterm is configured to update utmp.

       LINES
            the height of the xterm in characters (cf: "stty rows").

       LOGNAME
            when xterm is configured to update utmp.

       SHELL
            when xterm is configured to update utmp.  It is also  set  if  you
            provide the shell name as the optional parameter.

       TERMCAP
            the  contents  of  the  termcap entry corresponding to $TERM, with
            lines and columns values substituted for the  actual  size  window
            you have created.

       TERMINFO
            may  be defined to a nonstandard location in the configure script.

FILES

       The actual pathnames given may differ on your system.

       /var/run/utmp
            the system logfile, which records user logins.

       /var/log/wtmp
            the system logfile, which records user logins and logouts.

       /usr/lib/X11/app-defaults/XTerm
            the xterm default application resources.

       /usr/lib/X11/app-defaults/XTerm-color
            the xterm color application resources.  If your  display  supports
            color, use this
                      *customization: -color
            in  your  .Xdefaults  file to automatically turn on color in xterm
            and similar applications.

ERROR MESSAGES

       Most of the fatal error messages from xterm use the following format:
              xterm: Error XXX, errno YYY: ZZZ
       The XXX codes (which are used by xterm as  its  exit-code)  are  listed
       below, with a brief explanation.

       1    is  used  for  miscellaneous  errors,  usually  accompanied  by  a
            specific message,

       11   ERROR_FIONBIO
            main: ioctl() failed on FIONBIO

       12   ERROR_F_GETFL
            main: ioctl() failed on F_GETFL

       13   ERROR_F_SETFL
            main: ioctl() failed on F_SETFL

       14   ERROR_OPDEVTTY
            spawn: open() failed on /dev/tty

       15   ERROR_TIOCGETP
            spawn: ioctl() failed on TIOCGETP

       17   ERROR_PTSNAME
            spawn: ptsname() failed

       18   ERROR_OPPTSNAME
            spawn: open() failed on ptsname

       19   ERROR_PTEM
            spawn: ioctl() failed on I_PUSH/"ptem"

       20   ERROR_CONSEM
            spawn: ioctl() failed on I_PUSH/"consem"

       21   ERROR_LDTERM
            spawn: ioctl() failed on I_PUSH/"ldterm"

       22   ERROR_TTCOMPAT
            spawn: ioctl() failed on I_PUSH/"ttcompat"

       23   ERROR_TIOCSETP
            spawn: ioctl() failed on TIOCSETP

       24   ERROR_TIOCSETC
            spawn: ioctl() failed on TIOCSETC

       25   ERROR_TIOCSETD
            spawn: ioctl() failed on TIOCSETD

       26   ERROR_TIOCSLTC
            spawn: ioctl() failed on TIOCSLTC

       27   ERROR_TIOCLSET
            spawn: ioctl() failed on TIOCLSET

       28   ERROR_INIGROUPS
            spawn: initgroups() failed

       29   ERROR_FORK
            spawn: fork() failed

       30   ERROR_EXEC
            spawn: exec() failed

       32   ERROR_PTYS
            get_pty: not enough ptys

       34   ERROR_PTY_EXEC
            waiting for initial map

       35   ERROR_SETUID
            spawn: setuid() failed

       36   ERROR_INIT
            spawn: can’t initialize window

       46   ERROR_TIOCKSET
            spawn: ioctl() failed on TIOCKSET

       47   ERROR_TIOCKSETC
            spawn: ioctl() failed on TIOCKSETC

       48   ERROR_SPREALLOC
            spawn: realloc of ttydev failed

       49   ERROR_LUMALLOC
            luit: command-line malloc failed

       50   ERROR_SELECT
            in_put: select() failed

       54   ERROR_VINIT
            VTInit: can’t initialize window

       57   ERROR_KMMALLOC1
            HandleKeymapChange: malloc failed

       60   ERROR_TSELECT
            Tinput: select() failed

       64   ERROR_TINIT
            TekInit: can’t initialize window

       71   ERROR_BMALLOC2
            SaltTextAway: malloc() failed

       80   ERROR_LOGEXEC
            StartLog: exec() failed

       83   ERROR_XERROR
            xerror: XError event

       84   ERROR_XIOERROR
            xioerror: X I/O error

       90   ERROR_SCALLOC
            Alloc: calloc() failed on base

       91   ERROR_SCALLOC2
            Alloc: calloc() failed on rows

       92   ERROR_SREALLOC
            ScreenResize: realloc() failed on alt base

       96   ERROR_RESIZE
            ScreenResize: malloc() or realloc() failed

       102  ERROR_SAVE_PTR
            ScrnPointers: malloc/realloc() failed

       110  ERROR_SBRALLOC
            ScrollBarOn: realloc() failed on base

       111  ERROR_SBRALLOC2
            ScrollBarOn: realloc() failed on rows

       121  ERROR_MMALLOC
            my_memmove: malloc/realloc failed

BUGS

       Large pastes do not work on some systems.  This is not a bug in  xterm;
       it  is  a  bug  in  the pseudo terminal driver of those systems.  xterm
       feeds large pastes to the pty only as fast as the pty will accept data,
       but  some  pty  drivers do not return enough information to know if the
       write has succeeded.

       Many of the options are not resettable after xterm starts.

       This program still needs to be rewritten.  It should be split into very
       modular  sections, with the various emulators being completely separate
       widgets that do not know about each other.  Ideally, you’d like  to  be
       able  to  pick and choose emulator widgets and stick them into a single
       control widget.

       There needs to be a dialog box to allow entry  of  the  Tek  COPY  file
       name.

SEE ALSO

       resize(1), luit(1), X(1), pty(4), tty(4)
       Xterm Control Sequences (this is the file ctlseqs.ms).

       http://invisible-island.net/xterm/xterm.html

AUTHORS

       Far too many people, including:

       Loretta Guarino Reid (DEC-UEG-WSL), Joel McCormack (DEC-UEG-WSL), Terry
       Weissman (DEC-UEG-WSL), Edward Moy (Berkeley),  Ralph  R.  Swick  (MIT-
       Athena),  Mark  Vandevoorde  (MIT-Athena),  Bob McNamara (DEC-MAD), Jim
       Gettys (MIT-Athena), Bob Scheifler (MIT X Consortium), Doug Mink (SAO),
       Steve  Pitschke  (Stellar),  Ron Newman (MIT-Athena), Jim Fulton (MIT X
       Consortium), Dave Serisky (HP),  Jonathan  Kamens  (MIT-Athena),  Jason
       Bacon,  Stephen  P.  Wall,  David Wexelblat, and Thomas Dickey (XFree86
       Project).

                                X Window System                       XTERM(1)