Provided by: pcmcia-cs_3.2.8-5.2ubuntu5_i386
xirc2ps_cs - Xircom CE2ps (and newer) device driver
insmod xirc2ps_cs.o [pc_debug=n] [full_duplex=n] [irq_list=i,j,...]
xirc2ps_cs is the low-level Card Services driver for the Xircom 16-bit
PCMCIA ethernet adapters. When this driver is attached to a card, it
allocates the next available ethernet device.
Selects the PCMCIA debugging level. This parameter is only
available if the module is compiled with debugging enabled. A
non-zero value enables debugging.
Selects the transceiver type, for some CE3B-100 cards that lack
the ability to autonegotiate. For such cards, a value of 1
selects 10baseT, and 4 selects 100baseT.
Selects full duplex mode. The default is 0 (half duplex).
Specifies the set of interrupts that may be allocated by this
Enables a hack to avoid lockups on some cards. Use this only
if you really have lockup problems with your card.
Please report to <email@example.com>
Werner Koch <firstname.lastname@example.org>
1.5 1998/09/15 12:40:59 XIRC2PS_CS(4)