Provided by:
maradns_1.0.35-1_i386 
NAME
csv1 - Format of the csv1 zone file that MaraDNS uses
SPECIAL CHARACTERS
| This delimits fields
# This signifies a comment. Lines starting with this are ignored,
otherwise it has no significance
% This, in domain names, signifies that the rest of the domain name
should be the name of this zone
* This is translated to mean "any host name that otherwise does not
resolve". It must be at the beginning of a domain name.
\ This is used an an escape character, either to escape octal values
such as ´\045´ for %, or to escape the ´%´ character so it has no
special meaning, or to escape the backslash character.
NOTES ON PROCESSING
All domain-name labels are converted to their lower-case equivalents
before processing is done. This is because domain-name literals in the
database with one or more upper-case letters in them are case-
sensitive. This is my way to resolve RFC1035 schizophrenic desire to
both allow binary domain labels, and its desire to be case-insensitive.
The file must first have a SOA record, followed by one or more NS
records, followed by other records. The initial NS and SOA records must
be RR for this zone. NS records after any non-NS record must be part of
another zone. The resolution algorithm will not break if non-CNAME
records share records with a CNAME record, but this is not a good idea
to do.
RR FORMAT
A domain name is a one-letter designation of its type, followed by the
domain name separated by dots, ending with either a % or a trailing
dot. If the domain name does not end with a % or trailing dot, an
error is returned.
SUPPORTED RR TYPES
MaraDNS currently supports the following types of resource records
(RRs):
Letter Type RFC1035 §3.2.2 value
A A 1
N NS 2
C CNAME 5
S SOA 6
P PTR 12
@ MX 15
T TXT 16
U any determined in third field of line
FORMAT OF SUPPORTED RR TYPES
Here are the formats, shown by letter name:
A: Has three fields
field one: the domain name
field two: the ttl for the name in seconds
field three: the ip address, in dotted decimal notation
Example:
Ahost.example.com.|7200|10.1.2.3
A records are described with grueling detail in RFC1035. In short, an A
record is an IP address for a given host name.
N: Has three fields
field one: the domain name of the record
field two: the ttl for the name in seconds
field three: the domain name this NS points to.
Example:
Nexample.com.|86400|ns.example.com.
NS (N here) records are described in RFC1035
C: Has three fields
field one: the domain name of the record
field two: the ttl for the name in seconds
field three: the domain this CNAME record points to
Example:
Calias.example.org.|3200|realname.example.org.
CNAME (which C is short for) records are described in RFC1035
S: Has nine fields
field one: the domain name of the record.
field two: the TTL of the record
field three: the origin of the domain. In other words, the name of the
primary name server for the domain.
field four: the email address for this domain (in the RFC822, not
BIND format)
field five: the serial for the domain
field six: the refresh (how often to see updates) for the domain
field seven: the retry (how often to try when down) for the domain
field eight: the expire (how long before the slave gives up) for the
domain
field nine: the minimum (and default) TTL for the domain
Example:
Sexample.net.|86400|example.net.|hostmaster@example.net.|19771108|7200|3600|604800|1800
SOA (S here) records are described in RFC1035
P: has three fields
field one: the IP we wish to point to (in in-addr.arpa form)
field two: the ttl for the name in seconds
field three: the FQDN for the IP in question
Example:
P3.2.1.10.in-addr.arpa.|86400|ns.example.com.
PTR (P here) records, which are used for reverse DNS lookups, are
described in RFC1035. Note that one needs control of the appropriate
in-addr.arpa subdomain to make PTR records visible on the internet at
large.
@: has four fields
field one: The host that people send email to
field two: the ttl for this record
field three: The preference for this MX host
field four: The name of this MX host
Example:
@example.com.|86400|10|mail.example.com.
MX (@ here) records are described in RFC1035
T: has three fields
field one: The host someone wants to get additional information about
field two: the ttl for this record
field three: The desired text. Any data becomes the record up until a
new line is reached. The new line is not part of the TXT
record
Example:
Texample.com.|86400|Example.com: Buy example products online
TXT (T here) records are described in RFC1035
U: has four fields
field one: The host someone wants a data type normally unsupported by
MaraDNS for
field two: the ttl for this record
field three: The numeric code for this data type (33 for SRV, etc.)
field four: The raw binary data for this data type
Example:
Uexample.com.|3600|40|\010\001\002Kitchen sink data
The above example is a "Kitchen Sink" RR (see draft-ietf-dnsind-
kitchen-sink-02.txt) with a "meaning" of 8, a "coding" of 1, a
"subcoding" of 2, and a data string of "Kitchen sink data". Since this
particular data type is not formallized in a RFC at this time, the most
appropriate method of storing this data is by using the catch-all
"unsupported" syntax.
EXAMPLE CSV1 ZONE FILE
# Zone file for example.com (example file)
# The SOA record must be first, followed by all authoritative NS
# records for this zone.
Sexample.com.|86400|example.com.|hostmaster@example.com.|19771108|7200|3600|604800|1800
Nexample.com.|86400|ns1.example.com.
Nexample.com.|86400|ns2.example.com.
# Some ’IN A’ records
Aexample.com.|86400|10.1.2.3
Amx.example.com.|86400|10.1.2.4
Ans1.example.com.|86400|10.0.0.1
Ans2.example.com.|86400|192.168.0.1
# An ’IN MX’ record
@example.com.|86400|10|mx.example.com.
# An ’IN CNAME’ record
Cwww.example.com.|86400|example.com.
# An ’IN TXT’ record
Texample.com.|86400|Example.com: Buy examples of products online!
# An ’A’ record showing the use of percent as a shortcut for the name
# of this zone (in this case, ’example.com.’)
Aftp.%|3600|10.7.8.9
# A ’TXT’ record showing the use of the backslash which allows any
# octal code in the record
Tpercent.%|7200|Get 50 45 off all items at example.com!
# A ’PTR’ record which, while marked as unauthoritative, allows this
# program to work with the obsolete tool nslookup when bound on IP 127.0.0.3
# NOTE: This record is not part of the example.com domain, and,
# therefore, can not be transferred with the getzone client
# Also, PTR records will not be visible unless one has control of the
# appropriate in-addr.arpa domain (or the in-addr.arpa. domain has CNAME
# records that point to host names one controls)
P3.0.0.127.in-addr.arpa.|1234|nslookup.bug.workaround.
LEGAL DISCLAIMER
THIS SOFTWARE IS PROVIDED BY THE AUTHORS ´´AS IS´´ AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
AUTHOR
Sam Trenholme http://www.samiam.org/