Provided by: libsane_1.0.17-1ubuntu4_i386 bug


       sane-lexmark - SANE backend for Lexmark X1100 Series scanners


       The  sane-lexmark  library  implements a SANE (Scanner Access Now Easy)
       backend that provides access to the scanner part of Lexmark X1100 AIOs.
       This backend should be considered beta-quality software!

       The scanners that should work with this backend are:

                 Vendor Model           status
              ----------------------  -----------
                Lexmark X1110           untested
                Lexmark X1140           untested
                Lexmark X1150           untested
                Lexmark X1170           untested
                Lexmark X1180           basic
                Lexmark X1185           basic

       The options the backend supports can either be selected through command
       line options to programs like scanimage  or  through  GUI  elements  in
       xscanimage or xsane.

       If  you  have  any  strange  behavior,  please  report  to  the backend
       maintainer or to the SANE mailing list.

       Valid command line options and their syntax can be listed by using
              scanimage --help -d lexmark:usb:<usb port>

       Scan Mode Options

       --mode selects the basic mode of operation of the scanner valid choices
              are  Color,  Gray  and  Lineart  The  default mode is Color. The
              Lineart mode is black and white only (1  bit).   Grayscale  will
              produce  256 levels of gray (8 bits). Color mode allows for over
              16 million different colors  produced  from  24  bits  of  color

              selects  the  resolution for a scan. The horizontal and vertical
              resolutions are set by the value of this option. The scanner  is
              capable  of  the  following resolutions for the specified option

                Value   Hor. Resolution  Vert. Resolution
                -----   ---------------  -------------------
                75      75dpi            75dpi
                150     150dpi           150dpi
                300     300dpi           300dpi
                600     600dpi           600dpi
                1200    600dpi           1200dpi

              requests a preview scan. The resolution used for that scan is 75
              dpi and the scan area and the scan mode are as specified through
              their options, or the default  if  not  specified.  The  default
              value for preview mode is "no".

              selects  the  size  of  the  area to be scanned. Valid sizes are
              Wallet, 3x5, 4x6, 5x7, 8x10, Letter, the default size is 3x5.

              selects the   minimum-brightness  to  get  a  white  point.  The
              threshold is only used with Lineart mode scans.  It is specified
              as a percentage in the range  0..100%  (in  steps  of  1).   The
              default value of the threshold option is 50.


       The  configuration  file /etc/sane.d/lexmark.conf contains only the usb
       device id (eg usb 0x043d 0x007c).


              The static library implementing this backend.

              The shared library implementing this backend (present on systems
              that support dynamic loading).


              If  the  library  was  compiled with debug support enabled, this
              environment variable controls the debug level for this  backend.
              E.g.,  a  value  of 128 requests all debug output to be printed.
              Smaller levels reduce verbosity.


       The windows TWAIN driver has many more options than this SANE  backend.
       However   they   are  only  software  adjustments.  This  backend  only
       implements what the scanner can support.


       Jerky movement on 600dpi gray 8x10 scan.
       Color calibration not implemented.
       Dark compensation not implemented.


       sane-scsi(5), scanimage(1), xscanimage(1), xsane(1), sane(7)


       The package is actively maintained by Fred Odendaal.