Provided by: nut-cgi_2.0.3-4build1_i386 bug


       upsstats.html - HTML template for Network UPS Tools upsstats


       This file is used by upsstats.cgi(8) to generate status pages.  Certain
       commands are recognized, and  will  be  replaced  with  various  status
       elements on the fly.


       All commands must be alone on a line, and start and end with @.  A line
       that has any extra characters before or after  the  @  will  be  passed
       through unchanged.


       Some  commands  begin  blocks  -  sections of the template that will be
       included, excluded, or repeated depending on certain parameters.

              Starts a block that will be repeated for each MONITOR  directive
              in  the  hosts.conf(5).  This is how you can generate pages that
              monitor all of your systems simultaneously.

              Ends a FOREACHUPS block.

       @IFSUPP var@
              Starts a block that will only be printed if the variable var  is
              supported  by  the  current  UPS.   This  is  generally  used to
              suppress "not supported" messages  by  avoiding  the  label  and
              variable call entirely.

              Ends an IFSUPP block.

       IFSUPP  blocks may be contained within a FOREACHUPS block.  Nesting and
       other combinations are not supported.


              Insert the ambient temperature in the current temperature scale.

       @DATE format@
              Insert  the  current date and time.  The format string is passed
              to strftime, so almost anything is  possible.   See  strftime(3)
              for possible values.

              Insert  the  entity  for  degrees  (°)  and  either  C  or F
              depending on the current temperature scale.

       @HOST@ Insert  the  designation  of  the  host  being  monitored,  like

              Insert the host’s description from hosts.conf(5).

              Insert  a  link  to upsstats.cgi with the "host" variable set to
              the current UPS.  This is only useful within a FOREACHUPS block.

       @IMG varname [extra]@
              Insert  an  IMG  SRC  to upsimage.cgi(8) for one of these status

                   battery.charge - Battery charge - a percentage

                   battery.voltage - The charge on the battery in volts

                   ups.load - UPS load - percentage

                   input.voltage - Incoming utility voltage

                   output.voltage - Outgoing voltage (from the UPS)

                   input.frequency - Incoming utility frequency (Hz)

                   output.frequency - Outgoing utility frequency (Hz)

                   ups.temperature - UPS temperature

              extra is where you can put additional  definitions.   Right  now
              the  valid  definitions are colors for various parts of the bars
              drawn by upsimage.cgi.  Possible color names are:

                   back_col - background color

                   scale_num_col - scale number color

                   summary_col - summary color (number at the bottom)

                   ok_zone_maj_col     - major  scale  color  for  the  normal
              ("ok") zone

                   ok_zone_min_col     -  minor  scale  color  for  the normal
              ("ok") zone

                   neutral_zone_maj_col - major scale color  for  the  neutral

                   neutral_zone_min_col  -  minor  scale color for the neutral

                   warn_zone_maj_col - major scale color for the warning zone

                   warn_zone_min_col - minor scale color for the warning zone

                   bar_col - the color of the bar in the middle

              All colors are hex triplets  -  0xff0000  is  red,  0x00ff00  is
              green, and 0x0000ff is blue.


                   @IMG battery.charge@

                   @IMG battery.charge back_col=0xff00ff bar_col=0xaabbcc@

                   @IMG input.voltage ok_zone_maj_col=0x123456@

              Insert  the  META  header  magic for refreshing the page if that
              variable has been set by the browser.  This needs to be  in  the
              HEAD section of the page.

              Expand the abbreviations in the ups.status variable - OL becomes
              "On line", OB becomes "On battery", and so on.

              Insert red, green, or yellow color  triplets  depending  on  the
              severity  of  the  current  UPS  status.   Normal operations are
              green, warnings like voltage trim/boost or "off" are yellow, and
              other  events  like being on battery or having a low battery are

       @VAR varname@
              Insert the current value of the status variable varname  on  the
              host being monitored, or "Not supported".

              Use the Celsius scale for temperature data (default).

              Use the Fahrenheit scale for temperature data.

              Insert the UPS temperature in the current scale.

              Insert  either #FF0000 (red) or #00FF00 (green) depending on the
              incoming utility voltage.  By default this  will  return  green,
              unless  the utility is outside the bounds defined by lowxfer and
              highxfer.  Those voltages are a function of your driver, and  do
              not exist on all of them.

              Insert the version number of the software.


       upsstats.cgi(8)  will  also  open a file called upsstats-single.html if
       you call it with "host=" set in the URL.  That file uses the same rules
       and techniques documented here.


       upsstats.cgi(8), upsimage.cgi(8)

   Internet resources:
       The NUT (Network UPS Tools) home page:

                                Tue Jul 29 2003               upsstats.html(5)