Provided by: nictools-nopci_1.3.3-1_i386 bug

NAME

       3c515-diag  -  setup and diagnostic program for the 3Com 3c515 Ethernet
       cards.

SYNOPSIS

       3c515-diag [options]

DESCRIPTION

       3c515-diag is a program that you can use to diagnose problems with 3Com
       3c515 ethercards as well as reconfiguring it.

OPTIONS

       These  programs  follow  the  usual  GNU command line syntax, with long
       options starting with two  dashes  (‘-’).   A  summary  of  options  is
       included below.

       -h, --help
              Show summary of options.

       -V, --version
              Show version of program.

       -v, --verbose
              Verbose mode.

       -q, --quiet
              Be very unverbose.

       -a, --all
              Print all registers.

       -p, --base-address <port>
              Specify  port  to  use.  Valid  values are: 0x240, 0x280, 0x300,
              0x320, 0x340, 0x360

       -f, --interface <interface>
              Interface number. Valid Options are: 10baseT, 10base2, and 10Mbs
              AUI.

       -Q, -i, --irq <irq>
              Specify new interrupt. Valid values are: 3-5,7,9-15.

       -w, --write-EEPROM <values>
              Write to the EEPROMS with the specified values.

SEE ALSO

       mii-diag(8)

AUTHOR

       This manual page was written by Alain Schroeder <alain@debian.org>, for
       the Debian GNU/Linux system (but may be used by others).

                               February 23, 2001                 3C515-DIAG(8)