Provided by: nictools-nopci_1.3.3-1_i386 bug

NAME

       atlantic-setup  -  Setup  program for ethernet cards based on AT/LANTIC
       DP83905 chips.

SYNOPSIS

       atlantic-setup [options]

DESCRIPTION

       atlantic-setup is  a  setup  and  diagnostic  program  for  ISA  NE2000
       Ethernet adapters. It has specific support for configuring the National
       Semiconductor AT/LANTIC DP83905 used in on ISA Ethernet  adapters  such
       as  the  NE2000plus.  It also works several work-alike chips from other
       vendors.

OPTIONS

       These programs follow the usual GNU  command  line  syntax,  with  long
       options  starting  with  two  dashes  (‘-’).   A  summary of options is
       included below.

       -h, --help
              Show summary of options.

       -V, --version
              Show version of program.

       -v, --verbose
              Verbose mode.

       -q, --quiet
              Be very unverbose.

       -a, --all
              Print all registers.

       -N, --NE2000
              Set card to NE2000 mode.

       -W, --wd8013
              Set card to WD8013 mode.

       -p, --base-address <port>
              Specify port to use. Valid  values  are:  0x240,  0x280,  0x300,
              0x320, 0x340, 0x360 (default: 0x300).

       -P, --new_ioport <port>
              Set card to use new port. Valid values are: 0x240, 0x280, 0x300,
              0x320, 0x340, 0x360 (default: 0x300).

       -F, --interface <interface>
              Interface number. Valid Options are: 10baseT, 10base2,  10base5,
              AUI.

       -Q, -i, --irq <irq>
              Specify new interrupt. Valid values are: 3-5,9-12,15.

       -w, --write-EEPROM <values>
              Write to the EEPROMS with the specified values.

SEE ALSO

       mii-diag(8)

AUTHOR

       This manual page was written by Alain Schroeder <alain@debian.org>, for
       the Debian GNU/Linux system (but may be used by others).

                                 March 8, 2001               ATLANTIC-SETUP(8)