Provided by: pcmcia-cs_3.2.8-5.2ubuntu5_i386 bug


       cardmgr - PCMCIA device manager


       cardmgr  [-V]  [-q]  [-o]  [-f]  [-v]  [-c configpath] [-m modpath] [-p
       pidfile] [-s stabfile]


       Cardmgr monitors PCMCIA sockets for card insertion and removal  events.
       When  a  card  is  inserted, cardmgr looks up the card in a database of
       known cards.  If the card can be identified, appropriate device drivers
       will  be  loaded  and  bound to the card.  When a card is ejected, that
       card’s drivers will be shut down and unloaded if  possible.   Based  on
       the  contents  of  the  PCMCIA card configuration database, cardmgr may
       also execute arbitrary  commands  when  appropriate  cards  are  either
       inserted or removed.

       All  insertion and removal events, device driver loads and unloads, and
       startup and shutdown commands are reported  in  the  system  log  file.
       Warnings  and  errors  will  also  be  logged.  Current card and device
       information for each socket is recorded in /var/lib/pcmcia/stab.

       Normally, when a card is identified, cardmgr will send a  beep  to  the
       console.   A  beep  is  also  generated  when  a  card  is successfully
       configured.  A beep of lower pitch is  generated  if  either  of  these
       steps fails.  Ejecting a card produces a single beep.

       When cardmgr receives a SIGHUP signal, it will reload its configuration
       file.  When cardmgr receives a SIGTERM signal, it will  shut  down  all
       sockets  that  are not busy and then exit, but drivers for busy sockets
       will stay loaded.

       If the PCMCIA_OPTS environment variable is set, its  contents  will  be
       parsed after the main card configuration file is read.

       At  startup,  cardmgr  requires  that  /tmp reside on a filesystem that
       permits special device files (i.e., a real linux  filesystem,  that  is
       not mounted "nodev").


       -V     Show version information and exit.

       -q     Quiet mode: don’t beep when cards are inserted.

       -v     Verbose  mode:  generates  more  informational  messages  during
              normal  operation.   Configuration  scripts  are  executed  with

       -f     Foreground:  do  not  fork  and  run  as  a  daemon  until after
              configuring any cards that are already present.

       -o     One pass: configure cards that are  present,  then  exit.   This
              flag also forces cardmgr to run in the foreground.

       -c configpath
              Look  for the card configuration database and card configuration
              scripts in the specified directory, instead of /etc/pcmcia.

       -m modpath
              Look for loadable kernel modules  in  the  specified  directory,
              instead of /lib/modules/uname -r.

       -p pidfile
              Write  the  PID  of  the  cardmgr process to the specified file,
              instead of /var/run/

       -s stabfile
              Write current socket information to the specified file,  instead
              of /var/lib/pcmcia/stab.


       /etc/pcmcia/config        Card configuration database
       /etc/pcmcia/config.opts   Local resource settings for PCMCIA devices
       /var/run/      PID of active cardmgr process
       /var/lib/pcmcia/stab      Current  card and device information for each


       David Hinds -


       pcmcia(5), stab(5), cardctl(8).