Provided by: nictools-nopci_1.3.3-1_i386 bug

NAME

       eexpress-diag - Diagnostic program for Intel EtherExpress 16

SYNOPSIS

       eexpress-diag [options]

DESCRIPTION

       eexpress-diag is a programm which you can use to diagnose problems with
       your Intel EtherExpress 16 cards.

OPTIONS

       These programs follow the usual GNU  command  line  syntax,  with  long
       options  starting  with  two  dashes  (‘-’).   A  summary of options is
       included below.

       -h, --help
              Show summary of options.

       -V, --version
              Show version of program.

       -v, --verbose
              Verbose mode.

       -a, --all
              Print all registers.

       -p, --base-address <port>
              Specify port to use. Valid  values  are:  0x240,  0x280,  0x2C0,
              0x300, 0x320, 0x340, 0x360

       -Q, -i, --irq <irq>
              Specify new interrupt. Valid values are: 3-5,9-12,15.

       -w, --write-EEPROM <values>
              Write to the EEPROMS with the specified values.

SEE ALSO

       mii-diag(8)

AUTHOR

       This manual page was written by Alain Schroeder <alain@debian.org>, for
       the Debian GNU/Linux system (but may be used by others).

                                 March 8, 2001                EEXPRESS-DIAG(8)